#Richard Mille RM 33-02

[relogioserelogios]

Richard Mille RM 33-02 Automatic, o primeiro RM automático redondo em carbono TPT. 🔥🔥🔥 Com dimensões de 41,7 x 8,8 mm, é equipado com o movimento automático com microrrotor RMXP1, de apenas 2,60 mm de espessura! 💰 USD 145,000 📷 @richardmilleofficial • • #richardmille #rm3302 #richardmillerm3302 #finewatchmaking #hautehorlogerie #relogioserelogios https://www.instagram.com/p/B8l5VjGl4rS/?igshid=rcsd4eok2uw3

[haulogerie]

Richard Mille RM 33-02 Automatic. Link in bio. Watches of the Week. #haulogerie https://www.instagram.com/p/B6cAnT2n3LR/?igshid=6p2iirv3g42h

[uncrate]

Richard Mille RM 33-02 Watch

[watchilove]

By marrying the performance of a sports watch with the elegance of a round timepiece, Richard Mille has successfully merged two diametrically opposing characteristics. Overseen by Julien Boillat, the Richard Mille watch exteriors teams have reinterpreted the collection’s first ultra-thin round watch: the RM 033, which was introduced in 2011.

Reinterpretation of the RM 033 introduced in 2011

First round automatic watch in Carbon TPT®

Limited edition of 140 timepieces

‘We believe it is both essential and logical to pay the same care and attention to evolving our collections as to the original creation of our models. In embodying the brand’s intended vision of extreme versatility, the RM 033 is a watch for every day and any day. We have reinterpreted its aesthetics without disservice to the original version by accentuating its lines. Meanwhile, the exterior decoration, case and dial have been reworked to project a sportier vibe. The RM 33-02 thus achieves a delicate synthesis of so-called ‘lifestyle’ style and sporty style,’ shares Julien Boillat.

Julien Boillat (by Renaud Corlouër)

The taut lines of the case combine the curves of a tonneau shape and the elegance of a round form with a subtle allusion to sporty style in the design of the hollows. This first round Carbon TPT® automatic watch exhibits a Carbon TPT® bezel and caseback alongside a satin-finished red gold caseband. The design of the strap prolongs that of the two indentations positioned unusually at 6 and 12 o’clock in a highly original way. These new vanishing lines also contribute to the dynamics of this already extremely bold case.

  The sporty, round, RM 33-02 timepiece is powered by the skeletonised RMXP1 calibre in grade-5 titanium. Regulated by a variable-inertia balance oscillating at 3 Hz, this calibre is wound by an off-centre platinum micro-rotor that considerably reduces the movement’s total thickness to 2.60 mm. Yet this thinness in no way inhibits the architectural expression intrinsic to the brand. The wet sandblasted and Titalyt®-treated baseplate, the micro-blasted, stretched and satin-finished surfaces, and the anglage—all produced entirely by hand—accentuate volumes by playing with shadow and light thanks to the highly graphic skeletonisation. The exterior elements and hour-markers further add to this complex sense of depth and power. In 5N gold hour-markers on two rigid titanium rails fixed between the flange and the movement. The dial, which spans the entire calibre, accentuates the volumes while the typography of the oversized numerals adds a dynamic element to the watch’s easy readability.

By juxtaposing soft gold with the strength of Carbon TPT®, and by combining the graphic codes of the lifestyle and sports spheres for both males and females, Richard Mille clearly communicates a desire to combine allegedly contradictory worlds within a single watch. The RM 33-02 Automatic is available as a limited edition of 140 timepieces.

Richard Mille RM 33-02 Automatic Technical Specifications and Price

Limited edition of 140 pieces in Carbon TPT® and red gold – 127.300€ without taxes (Germany)

MAIN FEATURES

CALIBRE RMXP1 Skeletonised automatic-winding movement with hours, minutes and off-centre monoblock platinum rotor.

POWER RESERVE Circa 45 hours (±10%)

BASEPLATE AND BRIDGES MADE OF GRADE 5 TITANIUM Manufacturing these components in grade 5 titanium treated with Titalyt® for the baseplate and black PVD coating for the bridges confers great rigidity on the entire assembly and ensures the precise surface flatness essential for perfect functioning of the gear train as well as stability of the movement.

The skeletonised baseplate and the bridges were subjected to separate and extensive validation tests to ensure they met rigorous strength requirements.

FREE-SPRUNG BALANCE WITH VARIABLE INERTIA This type of balance wheel represents the ultimate in innovation. It guarantees greater reliability when subjected to shocks and during movement assembly or disassembly, hence better chronometric results over time. The regulator index is eliminated, and a more accurate and repeatable calibration is possible thanks to 4 adjustable small weights located directly on the balance.

MONOBLOCK MICRO ROTOR To ensure the decentralised rotor’s optimal winding efficiency, the monobloc micro rotor has been designed to wind bi-directionally and is manufactured from solid platinum, providing it with an optimal weight-to-volume ratio.

SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE BRIDGES AND CASE This permits better control of the torque applied to screws during assembly. These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well.

  OTHER FEATURES

Movement diameter: 33.00 mm

Thickness: 2.60 mm

Number of jewels: 29

Barrel arbour: AP 20 steel

Balance: Glucydur®, 4 arms,moment of inertia 5.75 mg•cm2, angle of lift 53°

Frequency: 21,600 vph (3 Hz)

Balance spring: Nivaflex®

Shock protection: INCABLOC 908.22.211.100 (transparent)

Escapement wheel jewels: Rubifix (transparent)

Two-position stem: Manual winding, hand setting

CASE

The design and execution of the watch demonstrate a holistic approach to the conception of the movement, case and dial. As a result, everything has been constructed according to extremely rigorous specifications.

The front and back bezels are made of Carbon TPT®, a remarkable material with a unique finish obtained by layering hundreds of sheets of carbon fibres using an automated process that changes the orientation of the weft between layers.

Heated to 120 °C in an autoclave similar to those used for aeronautic components, the material is then ready to be machined at Richard Mille. During this phase, the many layers of Carbon TPT® are revealed, creating random patterns that make each piece unique. The caseband is in 5N red gold.

The tripartite case is assembled with 14 spline screws in grade 5 titanium and abrasion-resistant washers in 316L stainless steel, further complemented by integration of the lugs into the case’s torque screw system. The tripartite case is water-resistant to 30 metres, ensured by 2 Nitrile O-ring seals.

  DIAL

The numerals are created from solid metal and mounted on two linked, rigid titanium rails attached directly to the movement.

Thickness: 0.75 mm

FLANGES

Crafted of 5N PVD treated titanium; hour index points filled with approved luminous material.

Richard Mille RM 33-02

CRYSTAL

Bezel side

In sapphire (1,800 Vickers) with anti-glare treatment (both sides)

Thickness: 1.00 mm

Caseback

In sapphire with anti-glare treatment (both sides)

Thickness: 1.00 mm at the centre; outer edges 1.53 mm

Richard Mille RM 33-02 ©Jerome Bryon

FINISHING

MOVEMENT

Baseplate in hand-ground grade 5 titanium, wet sandblasted, Titalyt® treated

Bridges wet sandblasted, top surface polished by hand, grade 5 titanium PVD treated

Locking sections hand polished

Burnished pivots

Diamond-polished sinks on the bridge side

Pinions with undercuts

Richard Mille RM 33-02 ©Jerome Bryon

STEEL PARTS

Microblasted and hand-drawn surfaces

Sapphire-blasted surfaces

Anglage and polishing by hand

Richard Mille RM 33-02 ©Jerome Bryon

WHEELS

Rhodium plating (before cutting the teeth)

Minimal corrections applied to the wheels in order to preserve geometry and performance

Richard Mille RM 33-02 ©Jerome Bryon

Richard Mille RM 33-02 Automatic Gallery

Richard Mille RM 33-02

Richard Mille RM 33-02 ©Jerome Bryon

Richard Mille RM 33-02 ©Jerome Bryon

Richard Mille RM 33-02 ©Jerome Bryon

Richard Mille RM 33-02 ©Jerome Bryon

Julien Boillat (by Renaud Corlouër)

Richard Mille RM 33-02: A combination of ‘lifestyle’ and sporty style By marrying the performance of a sports watch with the elegance of a round timepiece, Richard Mille…

[louisonurmark]

RICHARD MILLE圓融有個性 RM 33-02腕表 時尚與運動完美交融

RICHARD MILLE圓融有個性 RM 33-02腕表 時尚與運動完美交融

RM33-02腕表是RICHARD MILLE首款採用TPT®碳纖維打造的圓形自動上鍊腕表，限量140只。（RICHARD MILLE提供）

RICHARD MILLE技術總監Julien Boillat認為RM 33-02腕表展現時尚與運動風巧妙相融的美學品味。（RICHARD MILLE提供）

RM33-02腕表的表背可欣賞五級鈦合金材質的RMXP1超薄機芯運轉的盛況。（RICHARD MILLE提供）

RM33-02腕表採用RMXP1超薄機芯，充分展現品牌精湛的製表工藝。（RICHARD MILLE提供）

RICHARD MILLE於2011年打造RM 033腕表，圓融又不減個性。（RICHARD MILLE提供）

在表壇掀起酒桶型腕表時尚潮風的RICHARD MILLE，其圓型表也不乏佳作，其中又以2011年的RM…

[thexpensivecom]

New Richard Mille RM 33-02 showcases brand’s Evolutionary and Experimental Boldness #extraflat #richardmille #rm33 #vaucher #worldofwatcheswow #luxury #luxurylifestyle #luxurylife #luxurystyle #lifestyle #thexpensive

[automobilesandmotorcycles]

Richard Mille Announces RM 33-02 Automatic

Gear Watches Richard Mille has introduced their follow-up to the RM 033, the new RM 33-02. Like the original, it has a circular case and is as flat as its internals will allow. The new RM 033-02 has a design that’s mixed both a ‘lifestyle’ style and sporty style. To give it a more sporty look, Richard Mille has constructed the RM 033-02 out of durable and stylish. For the front and back bezels, Carbon TPT was used while the caseband is crafted out of red gold. Keeping the case together are 14 grade 5 titanium screws. Altogether, it’s lightweight and able to withstand a beating. Speaking of lightweight, the dial itself is just 0.75 mm thick and is sculpted in a way that the wearer can see the mechanics lying underneath. For the movement, Richard Mille went with the Calibre RMXP1, bearing a 45-hour power reserve and an off-center monoblock platinum rotor. The Richard Mille RM 33-02 will be limited to just 140 examples and comes with a price tag of $145,000. You can learn more by clicking here. Latest Watch News

[d3diamonds]

With a 38.7mm case and weighing in at a mere 33 grams, Richard Mille has created three new versions of the RM 67-02 for pro athletes Alexander Zverev, Alexis Pinturault and Sebastien Ogier designed in the colors of the athlete's country. Alexander Zverev, will sport a red, yellow, and black RM 67-02 made from Carbon TPT and red Quartz TPT. A white Quartz TPT–cased watch with a blue strap and red accents on the crown and dial was made for Alexis Pinturault. A variation on that color scheme was created for Sébastien Ogier whose watch features a black Carbon TPT case with a blue strap and white, red, and blue accents on the hands, dial, and crown.

[relogioserelogios]

Novo Richard Mille RM 33-02 Automatic, o primeiro RM automático redondo em carbono TPT. 🔥🔥🔥 Com dimensões de 41,7 x 8,8 mm, é equipado com o movimento automático com microrrotor RMXP1, de apenas 2,60 mm de espessura! 💰 USD 145,000 📷 @richardmilleofficial • • #richardmille #rm3302 #richardmillerm3302 #finewatchmaking #hautehorlogerie #relogioserelogios https://www.instagram.com/p/B6MmoImltnx/?igshid=1ud7s487b49ml

[haulogerie]

Richard Mille RM 33-02 Automatic. Link in bio. Watches of the Week. ($145,000USD) @richardmilleofficial #casebackfridays #haulogerie https://www.instagram.com/p/B6j7JvyH06r/?igshid=1io209gz664eu

[automobilesandmotorcycles]

Richard Mille Announces RM 33-02 Automatic

Gear Watches Richard Mille has introduced their follow-up to the RM 033, the new RM 33-02. Like the original, it has a circular case and is as flat as its internals will allow. The new RM 033-02 has a design that’s mixed both a ‘lifestyle’ style and sporty style. To give it a more sporty look, Richard Mille has constructed the RM 033-02 out of durable and stylish. For the front and back bezels, Carbon TPT was used while the caseband is crafted out of red gold. Keeping the case together are 14 grade 5 titanium screws. Altogether, it’s lightweight and able to withstand a beating. Speaking of lightweight, the dial itself is just 0.75 mm thick and is sculpted in a way that the wearer can see the mechanics lying underneath. For the movement, Richard Mille went with the Calibre RMXP1, bearing a 45-hour power reserve and an off-center monoblock platinum rotor. The Richard Mille RM 33-02 will be limited to just 140 examples and comes with a price tag of $145,000. You can learn more by clicking here. Latest Watch News