#Radiation Cured Adhesives market

[industrynewsupdates]

Key Drivers Behind the Growth of the Waterborne Coatings Market

The global waterborne coatings market was valued at USD 57.67 billion in 2022 and is projected to expand at a compound annual growth rate (CAGR) of 5.6% from 2023 to 2030. This growth is primarily driven by an increase in construction activities worldwide. The surge in construction, fueled by rapid industrialization and urbanization, is expected to elevate the demand for waterborne coatings during the forecast period. There is a notable shift in coating preferences from low or high-volatility organic solvents to completely solvent-free options, which produce fewer emissions. This trend is likely to further boost the demand for waterborne coatings in both residential and commercial applications. Interior and exterior wall paint formulations predominantly use waterborne coatings, often based on acrylate/styrene dispersions. Manufacturers are concentrating on reducing the average binder requirement in these formulations by 8–12%, ensuring that the performance characteristics remain intact. Additionally, alkyd-based waterborne coatings are favored by many interior decorators due to their ease of application, glossy finish, and superior adaptability to climatic variations during application and drying.

The anticipated increase in automobile production capacities, along with innovations in design and aesthetics, is expected to be a significant driver of market growth in automotive applications. The rise in automobile production is projected to be fueled by population growth and increasing per capita disposable income, particularly in the emerging economies of the Asia Pacific and Latin America regions.

Gather more insights about the market drivers, restrains and growth of the Waterborne Coatings Market

Resin Insights

The acrylic resin segment led the market, capturing the largest revenue share of 83.4% in 2022. The rising demand from the infrastructure and automotive sectors, particularly due to the durability and glossy color retention of acrylic coatings under outdoor exposure, is expected to boost the demand for acrylic waterborne coatings. The need for acrylic resin-based coatings is anticipated to increase significantly in the foreseeable future, driven by expanding applications in radiation curing and electrodeposition.

In the transportation sector, there is a growing need for refinishing coatings for aircraft, automobiles, ships, railroads, and trucks, which is likely to enhance the demand for polyurethane (PU) coatings. These coatings are popular due to their properties such as abrasion resistance, toughness, and chemical and weather resistance. Stricter government regulations aimed at reducing volatile organic compound (VOC) emissions, combined with a shift in consumer preferences towards waterborne coatings over solvent-based alternatives, are significant factors propelling product demand. PU coatings are available in various forms, including oil-modified, two-component, moisture-curing, and lacquers. The rising demand for PU coatings across diverse end-use industries, such as electrical coils and automotive manufacturing, is expected to positively impact segment growth.

Furthermore, the increasing demand for ultra-low VOC, low-odor epoxy resin-based coatings in the transportation sector and DIY flooring applications is projected to drive segment growth during the forecast period. Epoxy coatings are known for their strong adhesion and anti-corrosion properties, making them suitable for metal surface primers. These coatings are also extensively used in electrical insulation applications due to their high heat resistance. The rapidly expanding electrical insulation industry is likely to support the growth of the epoxy coatings segment in the coming years.

Order a free sample PDF of the Waterborne Coatings Market Intelligence Study, published by Grand View Research.

[yakubali7842]

The Versatility and Importance of Silicone Glue in Hardware Chemicals

What is Silicone Glue?

Silicone glue is a high-performance adhesive made from silicone, a compound that combines silicon, oxygen, and other elements. Unlike traditional adhesives, it offers several benefits, such as resistance to moisture, high temperatures, and UV radiation. These properties make silicone glue suitable for various indoor and outdoor uses, where standard adhesives might fail.

One of the key features is its flexibility. As it cures, it maintains elasticity, allowing it to absorb shocks and movements between bonded surfaces without breaking. This makes it ideal for applications where materials may expand or contract due to temperature changes or vibrations.

Applications of Silicone Glue

1. Construction and Building Materials

In the construction sector, it is widely used for sealing joints, gaps, and cracks. It is especially valuable in areas that require a waterproof seal, such as bathrooms, kitchens, and exterior windows. Silicone glue is often applied to bond glass and metal in window frames, where its durability helps withstand exposure to harsh weather conditions.

In addition, silicone glue is commonly used in architectural projects that involve bonding large panels of glass or other building materials. Its strength ensures that the structures remain secure, while its flexibility accommodates any movement due to weather fluctuations.

2. Automotive Industry

The automotive sector relies heavily on silicone glue for its high temperature and chemical resistance. It is often used to seal engines, gaskets, and other components exposed to oil, heat, and moisture. In automotive repairs and manufacturing, silicone glue ensures that parts stay securely bonded, reducing the risk of leaks or mechanical failures.

Whether used to adhere windshields or bond electrical components, it is trusted to maintain its integrity in the demanding environments that vehicles are often exposed to.

3. Electronics and Appliances

In the electronics industry, it is prized for its insulating properties. It is commonly used to bond components without the risk of short circuits or heat damage. From smartphones to home appliances, manufacturers rely on silicone glue to keep parts securely in place while protecting them from environmental stress.

Its non-conductive nature makes silicone glue the adhesive of choice for delicate electronics, ensuring the longevity of devices by protecting them from moisture and heat.

4. Home Improvement and DIY Projects

For DIY enthusiasts and home improvement projects, silicone glue is a versatile tool. It can be used to repair broken ceramics, fix leaks, and seal windows. Its water-resistant properties make it ideal for bathroom and kitchen projects, where moisture can compromise other adhesives. It is also commonly used to repair outdoor furniture and seal gaps in roofing and siding.

Its ease of use and quick curing time make it a favorite among homeowners who want a durable, long-lasting solution for their repairs.

5. Marine and Outdoor Use

Given its resistance to water and UV radiation, it is widely used in marine and outdoor applications. Whether sealing boat hulls or bonding outdoor structures, it delivers a robust, waterproof bond that can withstand harsh environmental conditions. Silicone glue is often applied in projects that involve frequent exposure to water, such as sealing decks and other marine equipment.

Its flexibility ensures that the adhesive can endure the constant movement and stress associated with marine environments, making it a reliable choice for these demanding applications.

The Importance of Silicone Glue in the UAE Market

In the UAE, where extreme temperatures and high humidity are prevalent, silicone glue has become essential for industries that require durable, heat-resistant adhesives. The construction and manufacturing sectors in the region benefit greatly from their ability to maintain their performance in such tough climates.

For example, silicone glue in UAE is commonly used in construction projects to seal joints in buildings and infrastructure. Its ability to withstand the scorching heat, heavy rains, and sandstorms of the UAE climate ensures that it remains reliable for years. Additionally, silicone glue in UAE is a popular choice in the automotive industry, where it is used to secure vehicle parts that are exposed to both high temperatures and intense sunlight.

Whether in construction, manufacturing, or automotive sectors, silicone glue in UAE is a critical adhesive for businesses looking for long-lasting, high-performance bonding solutions.

Conclusion

In conclusion, silicone glue is a highly versatile and durable adhesive that finds applications across various industries. Its unique properties, such as water and heat resistance, flexibility, and the ability to bond different materials, make it indispensable in sectors ranging from construction and automotive to electronics and marine. Particularly in regions like the UAE, where environmental conditions are extreme, silicone glue in UAE plays a crucial role in ensuring the longevity and safety of projects.

By offering strong, flexible, and weatherproof bonds, silicone glue stands out as a trusted adhesive solution for industries worldwide. Whether for DIY projects at home or large-scale industrial applications, it delivers performance and reliability where it’s needed most.

[jesons-industries]

Navigating the Landscape of Adhesive Manufacturers in India: A Comprehensive Overview

The adhesive industry in India is witnessing significant growth, driven by increasing demand across various sectors, including construction, automotive, packaging, and furniture. As businesses seek reliable adhesive solutions, understanding the landscape of adhesive manufacturers in India is essential. This blog explores the key players in the industry, the types of adhesives available, and the critical factors to consider when selecting a manufacturer.

The Growing Adhesive Market in India

With India's rapid industrialization and expanding infrastructure projects, the demand for adhesives has surged. From construction to consumer goods, the versatility and efficiency of adhesives make them indispensable in numerous applications. This growth has led to the emergence of several adhesive manufacturers in India that cater to diverse needs, ranging from high-performance industrial adhesives to specialized consumer-grade products.

Types of Adhesives Offered by Adhesive Manufacturers in India

Polyurethane Adhesives: Known for their strength and flexibility, polyurethane adhesives are widely used in construction, automotive, and woodworking applications. They offer excellent adhesion to various surfaces, including metal, wood, and plastic.

Epoxy Adhesives: Renowned for their superior bonding capabilities, epoxy adhesives are ideal for applications requiring high strength and durability. They are commonly used in industries such as aerospace, automotive, and electronics.

Acrylic Adhesives: These adhesives are known for their fast curing times and resistance to weather and UV radiation. Acrylic adhesives are commonly used in signage, automotive, and building applications.

Hot Melt Adhesives: Ideal for packaging and woodworking, hot melt adhesives are thermoplastic materials that are applied in a molten state. They offer quick bonding and are often used in high-speed production lines.

Water-Based Adhesives: Environmentally friendly and versatile, water-based adhesives are used in various applications, including woodworking, packaging, and textile industries. They are low in volatile organic compounds (VOCs), making them safer for use.

Key Players in the Adhesive Manufacturing Industry in India

India boasts a robust network of adhesive manufacturers, some of which are recognized as leaders in the market:

Pidilite Industries: Known for its flagship brand Fevicol, Pidilite is one of the largest adhesive manufacturers in India, offering a wide range of adhesives for construction, automotive, and consumer applications.

Henkel India: A global leader in adhesives, Henkel India provides innovative adhesive solutions across various industries, including packaging, automotive, and electronics.

3M India: Renowned for its extensive portfolio of adhesives and bonding solutions, 3M India serves a diverse range of sectors, including healthcare, automotive, and consumer goods.

Sika India: A key player in construction adhesives, Sika India offers a range of high-performance adhesive solutions for building and construction applications.

Asian Paints: Though primarily known for its paints, Asian Paints also manufactures a range of adhesives for the construction and woodworking industries.

Factors to Consider When Choosing Adhesive Manufacturers in India

When selecting an adhesive manufacturer in India, consider the following factors to ensure you make an informed decision:

Product Range: Look for manufacturers that offer a diverse selection of adhesives to meet your specific needs. This includes industrial adhesives, construction adhesives, and specialized consumer products.

Quality Assurance: Ensure that the manufacturer adheres to international quality standards and certifications, ensuring the reliability and performance of their adhesives.

Customization Options: Some projects may require customized adhesive solutions. Choose a manufacturer that can tailor their products to fit your unique requirements.

Sustainability Practices: With growing concerns about environmental impact, partnering with manufacturers that prioritize eco-friendly practices and sustainable products can enhance your brand reputation.

Technical Support: Reliable customer service and technical support are essential for successful product implementation. Opt for manufacturers that offer assistance throughout the purchasing process and beyond.

Conclusion

As the demand for adhesive solutions continues to rise, understanding the landscape of adhesive manufacturers in India becomes increasingly important. By exploring the various types of adhesives available and considering key factors when selecting a manufacturer, businesses can make informed choices that enhance their operations. Whether you require industrial-grade adhesives or specialized solutions for specific applications, India's diverse range of adhesive manufacturers offers ample options to meet your needs. Partnering with a trusted manufacturer will ensure that you receive high-quality products that drive efficiency and effectiveness in your projects.

[sassyharmonywombat]

Lámparas excimer, previsión del tamaño del mercado mundial, clasificación y cuota de mercado de las 12 principales empresas

Según el nuevo informe de investigación de mercado “Informe del Mercado Global del Lámparas excimer 2024-2030”, publicado por QYResearch, se prevé que el tamaño del mercado mundial del Lámparas excimer alcance 0.18 mil millones de USD en 2030, con una tasa de crecimiento anual constante del 6.0% durante el período de previsión.

Figure 1. Tamaño del mercado de Lámparas excimer global (US$ Millión), 2019-2030

Según QYResearch, los principales fabricantes mundiales de Lámparas excimer incluyen USHIO, Hamamatsu Photonics, ORC MANUFACTURING, WONIK QnC, Radium, SEN ENGINEERING, Excelitas Technologies, Foshan Dingmei Optoelectronics, First UVC, Resonance, etc. En 2023, las cinco principales entidades mundiales tenían una cuota de aproximadamente 77.0% en términos de ingresos.

Figure 2. Clasificación y cuota de mercado de las 12 principales entidades globales de Lámparas excimer (la clasificación se basa en los ingresos de 2023, actualizados continuamente)

The Excimer Lamps market is primarily driven by several key factors:

1. Medical and Healthcare Applications: Excimer lamps are widely used in dermatology and ophthalmology for treating skin disorders like psoriasis, vitiligo, and atopic dermatitis, as well as for corneal reshaping in refractive surgery. The growing prevalence of skin diseases and eye disorders globally drives the demand for excimer lamps in medical treatments.

2. Industrial Applications: Excimer lamps are utilized in industrial processes such as semiconductor manufacturing, photochemical reactions, and UV curing of coatings, inks, and adhesives. They offer precise wavelength control and high-intensity UV radiation, making them suitable for various industrial applications that require rapid curing and precise UV exposure.

3. Water and Air Purification: Excimer lamps are effective in disinfecting water and air by destroying bacteria, viruses, and other pathogens through UV radiation. They are used in water treatment systems, air purification units, and HVAC (Heating, Ventilation, and Air Conditioning) systems to ensure clean and safe environments in residential, commercial, and healthcare facilities.

4. Research and Development: Excimer lamps play a significant role in scientific research and development, particularly in spectroscopy, photochemistry, and material science. They provide researchers with precise UV wavelengths for studying molecular structures, chemical reactions, and photophysical processes, driving innovation in various scientific disciplines.

5. Environmental and Regulatory Factors: Increasing concerns about environmental pollution and the need for sustainable technologies drive the adoption of excimer lamps in environmentally friendly applications such as water and air purification. Stringent regulations regarding water and air quality also contribute to the market demand for excimer lamp-based purification systems.

6. Emerging Technologies and Applications: Advancements in excimer lamp technology, such as improved efficiency, longer lifespan, and enhanced UV output, open up new opportunities in emerging applications such as UVB phototherapy, sterilization of medical instruments, and advanced semiconductor manufacturing processes.

In summary, the Excimer Lamps market is driven by its diverse applications in medical treatments, industrial processes, water and air purification, scientific research, and compliance with environmental regulations. The continuous evolution of technology and increasing awareness of UV-based solutions contribute to the growth and expansion of this specialized market.

Sobre QYResearch

QYResearch se fundó en California (EE.UU.) en 2007 y es una empresa líder mundial en consultoría e investigación de mercados. Con más de 17 años de experiencia y un equipo de investigación profesional en varias ciudades del mundo, QY Research se centra en la consultoría de gestión, los servicios de bases de datos y seminarios, la consultoría de OPI, la investigación de la cadena industrial y la investigación personalizada para ayudar a nuestros clientes a proporcionar un modelo de ingresos no lineal y hacer que tengan éxito. Gozamos de reconocimiento mundial por nuestra amplia cartera de servicios, nuestra buena ciudadanía corporativa y nuestro firme compromiso con la sostenibilidad. Hasta ahora, hemos colaborado con más de 60.000 clientes en los cinco continentes. Trabajemos estrechamente con usted y construyamos un futuro audaz y mejor.

QYResearch es una empresa de consultoría a gran escala de renombre mundial. La industria cubre varios segmentos de mercado de la cadena de la industria de alta tecnología, que abarca la cadena de la industria de semiconductores (equipos y piezas de semiconductores, materiales semiconductores, circuitos integrados, fundición, embalaje y pruebas, dispositivos discretos, sensores, dispositivos optoelectrónicos), cadena de la industria fotovoltaica (equipos, células, módulos, soportes de materiales auxiliares, inversores, terminales de centrales eléctricas), nueva cadena de la industria del automóvil de energía (baterías y materiales, piezas de automóviles, baterías, motores, control electrónico, semiconductores de automoción, etc.. ), cadena de la industria de la comunicación (equipos de sistemas de comunicación, equipos terminales, componentes electrónicos, front-end de RF, módulos ópticos, 4G/5G/6G, banda ancha, IoT, economía digital, IA), cadena de la industria de materiales avanzados (materiales metálicos, materiales poliméricos, materiales cerámicos, nanomateriales, etc.), cadena de la industria de fabricación de maquinaria (máquinas herramienta CNC, maquinaria de construcción, maquinaria eléctrica, automatización 3C, robots industriales, láser, control industrial, drones), alimentación, bebidas y productos farmacéuticos, equipos médicos, agricultura, etc.

[townandcountryroof]

Understanding the Different Types of Roof Paint

A roof not only shelters but also defines the character and resilience of a building. So, in the sense of functionality and aesthetics, Newcastle roof painting emerges as a silent guardian, offering protection against the elements while bestowing a touch of visual appeal. Yet, amidst the options available in today’s market, navigating the diverse array of roof paint types can feel akin to unravelling a  tapestry of hues and formulations. 

Let’s learn more about the intricacies of various roof paint types, elucidating their features, advantages, and applications to help you decide which colour to pick for your specific building. 

Acrylic Roof Paint

Acrylic roof paint emerges as a ubiquitous choice, revered for its versatility and durability. Formulated with water as its base, acrylic paint facilitates easy application and cleanup. It engenders a flexible and permeable membrane atop the roof surface, accommodating expansion and contraction in response to temperature fluctuations. Its superior UV resistance mitigates colour fading and heat absorption, thereby fostering a cooler interior ambiance. Compatible with diverse roofing materials like metal, concrete, and asphalt shingles, acrylic roof paint embodies a harmonious blend of functionality and aesthetics.

Asphalt Roof Paint

Tailored specifically for asphalt shingle roofs, asphalt roof paint, also known as bituminous paint, serves as a specialised coating imbued with protective properties. By forming a sealing layer, it fortifies the roof against water infiltration and augments its resistance to inclement weather conditions. Laden with bitumen, asphalt roof paint boasts commendable waterproofing prowess and exhibits robust adhesion to asphalt surfaces. Furthermore, it aids in rejuvenating ageing roofs by concealing minor imperfections and cracks, thereby prolonging their lifespan.

Elastomeric Roof Coating

Elastomeric roof coating emerges as a stalwart contender, characterised by its remarkable flexibility and endurance. Crafted from acrylic or silicone polymers, this coating manifests as a supple and resilient layer that ensconces the roof surface seamlessly. Its inherent ability to stretch and contract mitigates the risk of cracking or peeling, rendering it an ideal choice for flat or low-slope roofs susceptible to standing water and harsh climatic vicissitudes. Noteworthy for its superior waterproofing and weatherproofing attributes, elastomeric coatings offer respite from UV radiation and thermal fluctuations, thereby curbing energy expenditure.

Silicone Roof Coating

Synonymous with peerless durability and longevity, silicone roof coating stands as a premium option for discerning consumers. It engenders a thick, moisture-cured membrane that bestows a flawless barrier against water intrusion, UV radiation, and chemical aggressors. Possessing exceptional resistance to cracking, peeling, and fading, silicone coatings thrive in arduous climates and industrial settings. Additionally, they exhibit self-cleansing properties, impeding the accumulation of debris and grime, while also boasting eco-friendliness owing to their low VOC emissions.

Reflective Roof Coatings

Reflective roof coatings epitomise innovation in the realm of energy-efficient building solutions. Tailored to mitigate heat absorption, these coatings harness the prowess of light-coloured pigments or reflective additives to deflect solar radiation from the roof surface. Whether acrylic, silicone, or elastomeric-based, reflective coatings proffer varying degrees of reflectivity and insulation. Particularly beneficial for edifices nestled in sweltering climates or locales characterised by intense solar exposure, they facilitate the maintenance of optimal indoor temperatures, thus fostering energy conservation and prolonging the longevity of the roof substrate.

In the labyrinth of roof paint choices, selecting the apt formulation assumes paramount significance in safeguarding your investment and enhancing the visual allure of your abode. Whether your prerogative entails waterproofing, thermal insulation, or aesthetic enhancement, a myriad of options beckon, each tailored to cater to diverse requisites and preferences. Armed with a nuanced understanding of the manifold types of roof paint and their myriad attributes, you are poised to make a discerning choice that ensconces your roof in a cocoon of protection and panache.

[infinitiresearch]

UV Lamp Market| Analysis, Growth and Forecast, 2023 – 2027

Originally published on Technavio: UV Lamp Market by Product, Application, and Geography - Forecast and Analysis 2023-2027

The UV Lamp Market is poised for comprehensive analysis and anticipated growth during the forecast period from 2023 to 2027. This market, pivotal in various industries, will be examined based on its product variations, applications, and geographical trends influencing its trajectory.

UV lamps come in various products catering to diverse applications across industries. Mercury vapor lamps, low-pressure mercury lamps, and LED UV lamps are common variants in the UV Lamp Market. Mercury vapor lamps emit UV radiation through the excitation of mercury vapor, suitable for applications like water disinfection and curing processes in printing and coatings. Low-pressure mercury lamps are prevalent in germicidal applications, primarily in healthcare settings for air and surface disinfection. LED UV lamps, with their energy efficiency and versatility, find applications in curing adhesives, inks, and coatings across industries.

In terms of applications, the UV Lamp Market spans across healthcare, water treatment, industrial manufacturing, and printing and coating processes. In healthcare, UV lamps are employed for germicidal purposes to disinfect air, surfaces, and medical equipment, contributing to infection control. Water treatment facilities utilize UV lamps for disinfecting water by inactivating microorganisms, providing an eco-friendly alternative to chemical disinfection. Industrial manufacturing applications include curing processes in the production of adhesives, inks, and coatings, where UV lamps enable rapid and energy-efficient curing. In the printing and coating industry, UV lamps facilitate the curing of inks and coatings on various substrates, offering enhanced durability and quality.

Geographically, the global UV Lamp Market demonstrates a widespread presence, with notable contributions from regions such as North America, Europe, Asia-Pacific, and South America. North America, particularly the United States, stands as a major player in the market, driven by a well-established healthcare sector, stringent water treatment regulations, and advanced industrial manufacturing processes. Europe, with countries like Germany and the United Kingdom, is another key contributor, emphasizing sustainability in water treatment and embracing UV technology in various industrial applications. The Asia-Pacific region, led by countries such as China and India, is experiencing significant growth, reflecting increasing investments in healthcare infrastructure and industrial expansion. South America, with its focus on environmental conservation, also contributes significantly to the global market.

To Learn deeper into this report , View Sample PDF

The forecasted period for the UV Lamp Market underscores the essential role these devices play in promoting hygiene, ensuring water quality, and enhancing manufacturing processes across diverse sectors. As industries continue to prioritize sustainability, energy efficiency, and regulatory compliance, manufacturers and stakeholders in the UV lamp industry must stay attuned to evolving technological requirements, industry standards, and global market dynamics to capitalize on the expanding opportunities within this dynamic market.

For more information please contact.

[chemicalresearchupdates]

Innovations and Technological Advancements Shaping the Trimethylolpropane Triacrylate Market Landscape

The Trimethylolpropane Triacrylate Market is estimated to be valued at US$ 151.3 Mn in 2023 and is expected to exhibit a CAGR of 3.3% over the forecast period 2023 to 2030, as highlighted in a new report published by Coherent Market Insights. Market Overview:

Trimethylolpropane triacrylate (TMPTA) is an acrylate-functional organic compound made from trimethylolpropane and acrylic acid. It acts as a multifunctional monomer and enhances the chemical and physical properties when added to polymer formulations. TMPTA is used as a reactive diluent in various radiation curable coatings, inks and adhesives to reduce their viscosity for application while maintaining their performance. It helps to improve adhesion, flexibility and durability of the end products. Market Key Trends:

The global Trimethylolpropane Triacrylate Market is expected to witness steady growth over the forecast period owing to rising demand from coatings, inks and adhesives industries. Coatings application segment dominates the market and the increasing use of curable and UV-curable coatings in wood, plastic, metal and paper coatings will drive the demand for TMPTA. The growth of packaging industry focusing on extended shelf-life with UV-curable inks and labels using TMPTA is further fueling the market growth. Moreover, superior properties of TMPTA such as flexibility, durability and faster curing in adhesives have increased its usage in electronics and automotive adhesives propelling the market growth over the coming years.

Porter’s Analysis:

Threat of new entrants: Low capital requirements and established distribution channels lower barriers to entry in trimethylolpropane triacrylate market. However, presence of major players make it difficult for new players.

Bargaining power of buyers: Large buyers can negotiate lower prices due to bulk purchases. However, product differentiation and availability issues limits their influence.

Bargaining power of suppliers: Few manufacturers capable of producing trimethylolpropane triacrylate hold stronger position over buyers. Significant R&D investments required to produce specialty chemicals.

Threat of new substitutes: Alternative products available but none possess trimethylolpropane triacrylate’s attributes as reactive diluent for UV curable coatings, making it difficult to displace.

Competitive rivalry: Major players focus on capacity expansion to gain market share and competitive pricing to increase sales volumes.

SWOT Analysis:

Strength: Wide applications in UV curable coatings drive strong demand. Production expertise and integrated value chain are other key strengths.

Weakness: Volatile raw material prices and regulatory compliance issues pose challenges. Dependence on few major end-use industries also affects market.

Opportunity: Growth of electronics, paints & coatings industries in Asia Pacific enhances scope. Development of bio-based alternatives presents new opportunities.

Threats: Stringent environmental regulations can restrict usage. Substitutes from alternate chemistries if proven superior also threaten market.

Key Takeaways:

The global trimethylolpropane triacrylate market is expected to witness high growth, exhibiting CAGR of 3.3% over the forecast period, due to increasing demand from paints & coatings industry. The paints & coatings segment accounted for over 60% share of the overall demand in 2023. Regional analysis - Asia Pacific dominates the global market and is expected to maintain its lead position during the forecast period owing to presence of key manufacturers in countries like China and rapid expansion of end-use industries in the region. China held over 50% share of the global trimethylolpropane triacrylate market in 2023. Key players operating in the trimethylolpropane triacrylate market are BASF S.E., J&K Scientific Ltd., Miwon Specialty Chemical Co., Ltd., and KPX Green Chemical Co. Ltd. Major players focus on expansion into high growth regions through strategic collaboration with global players. 

[goldensunbalotiyaposts]

Industrial adhesives Manufacturers

Benefits of Using Adhesives in Trailer Manufacturing

Trailer manufacturing is a complex and demanding process that requires high-quality materials and techniques. One of the most important aspects of trailer manufacturing is the bonding of different components, such as metal, wood, plastic, and fiberglass. Traditionally, mechanical fasteners such as screws, rivets, and bolts have been used to join these components, but they have some drawbacks, such as:

- They create stress concentrations and weaken the structure

- They increase the weight and reduce the fuel efficiency of the trailer

- They require drilling holes and additional tools and labor

- They create corrosion and noise issues

- They affect the aesthetics and aerodynamics of the trailer

To overcome these challenges, many trailer manufacturers have switched to using adhesives as an alternative or complementary method of bonding. Adhesives offer several benefits over mechanical fasteners, such as:

- They distribute the stress evenly and enhance the strength and durability of the trailer

- They reduce the weight and improve the fuel efficiency of the trailer

- They eliminate the need for drilling holes and simplify the assembly process

- They prevent corrosion and noise problems

- They improve the appearance and aerodynamics of the trailer

Adhesives are also versatile and can bond different types of materials with different shapes and sizes. They can also provide additional functions, such as sealing, damping, and thermal insulation. Adhesives are available in different forms, such as liquids, pastes, tapes, and films, and can be applied using various methods, such as spraying, brushing, rolling, or dispensing.

However, not all adhesives are suitable for trailer manufacturing. Some factors that need to be considered when choosing an adhesive are:

- The compatibility of the adhesive with the materials to be bonded

- The environmental conditions that the trailer will be exposed to, such as temperature, humidity, UV radiation, and chemical agents

- The performance requirements of the trailer, such as load-bearing capacity, impact resistance, fatigue resistance, and flexibility

- The curing time and method of the adhesive

- The cost-effectiveness and safety of the adhesive

Therefore, it is important to consult with an adhesive expert or supplier before selecting an adhesive for trailer manufacturing. Some examples of adhesives that are commonly used in trailer manufacturing are:

- Epoxy adhesives: These are high-performance adhesives that can bond metal, wood, plastic, and fiberglass. They have excellent mechanical properties, chemical resistance, and temperature resistance. They can be cured at room temperature or with heat.

- Polyurethane adhesives: These are flexible adhesives that can bond metal, wood, plastic, and fiberglass. They have good impact resistance, vibration damping, and weather resistance. They can be cured at room temperature or with moisture.

- Acrylic adhesives: These are fast-curing adhesives that can bond metal, plastic, and fiberglass. They have good shear strength, peel strength, and UV resistance. They can be cured at room temperature or with heat.

In conclusion, adhesives are a valuable tool for trailer manufacturing that can improve the quality, performance, efficiency, and appearance of trailers. By choosing the right adhesive for the right application, trailer manufacturers can achieve optimal results and gain a competitive edge in the market.

[marketrendsposts]

The UV Adhesives market size is estimated to reach US$1.8 billion by 2027 after growing at a CAGR of 10.8% during the forecast period 2022-2027. UV or ultraviolet adhesives based on epoxy, acrylic, or silicone resins uses light or radiation to initiate permanent bonding without heating. The adhesives have rich features such as rapid curing, high-quality bondage, less waste creation and high durability which is boosting their market demand. High bonding stability provided by UV adhesives is fuelling its demand in various end-use industries such as automotive, medical, electronic and building & construction for various applications such as metal, glass, plastic and rubber. Factors such as growing cases of chronic disease, flourishing automotive production and fuelling construction activities are driving the growth of the UV adhesives market. However, the growing cost of raw materials can hamper the growth of the UV adhesives industry. The UV adhesives market size contracted in 2020 due to the COVID-19 pandemic as the lockdown restrictions decreased the demand for UV adhesives in sectors such as automotive and building & construction. However, with a steady recovery, the demand for UV adhesives is anticipated to increase in these sectors, thereby positively impacting the UV adhesives industry outlook during the forecast period.

[taoyuanus]

The latest developments in UV LED industry

During the three years of the epidemic, the UV LED industry has experienced ups and downs. Overall, the penetration of UV LEDs in terminal applications such as industrial curing and disinfection has accelerated significantly.

Market situation in terms of industrial curing In the field of industrial curing, the application of UVA LED started relatively early, and the technology is relatively mature. The performance of UVA LED curing equipment has been able to meet the market demand, and it is constantly accelerating the development of new subdivided application fields. At present, UVA LED has basically completely replaced mercury lamps in the fields of adhesive curing such as electronic components and medical consumables, as well as consumer curing represented by nail curing. Wide range of applications. In many fields such as offset printing, silk screen printing, optical fiber coating, wood curing, and automotive curing, there is a huge space for UV LEDs to replace them. However, the current curing equipment standards in the UV market are chaotic, and there are large information errors, which affect the further expansion and penetration of UV LEDs in the curing field.

Market situation in terms of disinfection and sterilization In terms of disinfection and sterilization, UVC LEDs have been widely used in the fields of air, water, and surface disinfection. However, due to the overall low radiation efficiency of UVC LEDs, air disinfection and flowing water treatment in small spaces or special areas are more popular in the market. Especially in the field of household appliances, the performance of disinfection and expansion is even better. At present, many brand disinfection machines, disinfection cabinets, refrigerators, air conditioners, washing machines, air purifiers, humidifiers and other products are equipped with UVC LED disinfection functions. (1) The market generally believes that the field of home appliances may be one of the application directions that can most stimulate the volume of UV LEDs

Zhongke Lu'an has designed and developed a series of supporting module products for white goods, small home appliances and other application scenarios, and has obtained long-term stable orders from leading white goods enterprises. In 2023, we will continue to deepen the market of white goods and small home appliances in terms of modules, develop more new applications and new concepts of UVC LEDs, and strive to achieve standard functions of home appliances.

The water purification company Angel revealed that about 50,000 to 100,000 sets of UVC LED modules will be used in 2022, a year-on-year increase of more than 60%. Angel believes that the application of UVC LED in water treatment is becoming more and more certain. The main problem at present is that based on the existing technical conditions, the overall cost of the sterilization module is relatively high. For household appliances, the cost pressure is very high. On the whole, home appliance terminals are quite sensitive to prices, and the current performance advantages of UVC LED products cannot support the cost premium brought by them, and the cost of modules is too high, among which the cost reduction and optimization of chips is particularly critical. If the chip technology achieves an effective breakthrough, it is believed that most home appliances are expected to be equipped with UVC LED technology, and the installed capacity of home appliances is bound to usher in a leapfrog growth. (2) In the field of public health and safety disinfection, UVC LED application scenarios have been further expanded

In 2022, Zhongke Luan developed a series of high-efficiency sterilization products, which are widely used in medical care, logistics cold chain, public transportation, schools, large venues, etc., such as vertical/wall-mounted air disinfection machines, cold chain package disinfection machines, disinfection robots , elevator sterilizer and other products, this series of products will shine in the Beijing Winter Olympics in early 2022.

Zhixin Semiconductor has a deep layout in the application field of high-power specialized intelligent products, and has designed and developed a variety of professional-grade disinfection equipment such as "Space Guard", which is suitable for the interior of closed spaces such as conference rooms, hospital wards, school classrooms, theater shopping malls, etc. .

Guangpu has successively launched a series of products such as electronic masks, health care machines, air disinfection machines, and elevator ultraviolet disinfection systems, which are widely used in public places and cold chain logistics disinfection applications. (3) Large-scale industrial sterilization or one of the application directions of UVC LED in the future, such as industrial water treatment, urban tap water treatment, aquaculture, etc. At present, foreign manufacturers including Metawater in Japan, Typhon in the UK and AquiSense Technologies in the United States have all demonstrated UVC LED municipal disinfection systems. Several units have been installed and more municipal and industrial systems are planned to be installed.

[myblogscmi]

Global Polyurea Coatings Market Is Estimated To Witness High Growth Owing To Growing Demand in Construction Industry

The global Polyurea Coatings Market is estimated to be valued at USD 1.2 billion in 2022 and is expected to exhibit a CAGR of 10.3% over the forecast period 2022-2030, as highlighted in a new report published by Coherent Market Insights.

A) Market Overview:

Polyurea coatings are a type of protective coating that provides excellent chemical and weather resistance, high durability, and fast curing time. They find extensive applications in various industries such as construction, automotive, oil and gas, and marine. Polyurea coatings offer superior protection against corrosion, abrasion, and impact, making them ideal for use in harsh environments.

B) Market Dynamics:

The Polyurea Coatings Market is being driven by two main factors - the growing demand in the construction industry and the increasing awareness about protective coatings.

1. Growing Demand in the Construction Industry: The construction industry is experiencing significant growth globally, driven by urbanization and infrastructure development projects. Polyurea coatings are widely used in construction applications such as bridges, tunnels, flooring, and roofing due to their superior durability, flexibility, and resistance to chemicals and UV radiation. Additionally, the rising demand for green building materials and sustainable construction practices is further fueling the adoption of polyurea coatings.

2. Increasing Awareness About Protective Coatings: There is a growing awareness among industries about the importance of protective coatings to enhance the lifespan and performance of their assets. Polyurea coatings offer superior protection against corrosion, moisture, chemicals, and extreme weather conditions. Industries such as automotive, oil and gas, and manufacturing are increasingly using polyurea coatings to protect their equipment, machinery, and infrastructure. This increased awareness about the benefits of protective coatings is driving the demand for polyurea coatings in various industries.

C) Market Key Trends:

One key trend in the polyurea coatings market is the increasing adoption of spray-applied polyurea coatings. Spray-applied polyurea coatings offer several advantages over traditional coatings, including faster application, seamless coverage, and excellent adhesion properties. They can be easily applied to complex shapes and surfaces, making them ideal for use in areas that are difficult to reach.

For example, in the automotive industry, spray-applied polyurea coatings are used to protect truck bed liners, offering superior impact resistance and durability. Additionally, in the oil and gas industry, polyurea coatings are sprayed onto pipelines and storage tanks to protect against corrosion and chemical abrasion. The adoption of spray-applied polyurea coatings is expected to increase further, driven by the need for efficient and cost-effective coating solutions.

D) SWOT Analysis:

Strength:

1. Excellent resistance to corrosion

2. High durability and flexibility

Weakness:

1. Higher cost compared to traditional coatings

2. Limited color options

Opportunity:

1. Growing demand for protective coatings in emerging economies

2. Increasing R&D activities for product innovation

Threats:

1. Availability of alternative coating technologies

2. Stringent environmental regulations

E) Key Takeaways:

Paragraph 1: The global polyurea coatings market is expected to witness high growth, exhibiting a CAGR of 10.3% over the forecast period, due to increasing demand in the construction industry and growing awareness about the benefits of protective coatings.

Paragraph 2: In terms of regional analysis, Asia Pacific is expected to be the fastest-growing and dominating region in the polyurea coatings market. The region's rapid urbanization, infrastructure development projects, and increasing investment in the construction industry are driving the demand for polyurea coatings.

Paragraph 3: Key players operating in the global polyurea coatings market are Specialty Products Inc., VersaFlex, PPG Industries, Rhino Linings Corporation, VIP GmbH, Sherwin-Williams Company, and Kukdo Chemicals. These players are focusing on strategic partnerships, product innovation, and expansion to gain a competitive edge in the market.

[supremeblossoms]

Super Seal PS  (Pour Grade) Market Overview, Size, Share, Trend, Growth and Outlook

Polysulphide sealant, specifically pour grade polysulphide sealant, is a type of sealant commonly used in construction and civil engineering applications. It is a two-component sealant that cures to form a flexible, durable, and watertight seal. The two components typically consist of a liquid polymer base and a curing agent.

Read more@ https://supremebituchem.com/

Here are some key features and properties of polysulphide sealants:

Flexibility: Polysulphide sealants exhibit excellent flexibility, allowing them to accommodate joint movements and vibrations without cracking or losing their seal.

Chemical Resistance: They have good resistance to various chemicals, including fuels, oils, and some solvents, making them suitable for applications where exposure to such substances is expected.

Waterproofing: Polysulphide sealants provide effective waterproofing properties, making them commonly used for sealing joints in concrete structures, such as expansion joints in buildings, bridges, and dams.

Adhesion: They have good adhesion to a wide range of substrates, including concrete, metal, glass, and many plastics, ensuring a strong bond between the sealant and the surface.

Weather Resistance: Polysulphide sealants exhibit good resistance to weathering, including UV radiation, temperature extremes, and aging, which helps maintain the integrity of the seal over time.

Pour Grade: The term "pour grade" refers to the consistency of the sealant, which allows it to be poured or dispensed easily into horizontal joints or cracks. This makes it suitable for filling larger voids or sealing expansion joints in concrete pavements or other flat surfaces.

Cure Time: The curing time for polysulphide sealants can vary depending on the specific product and environmental conditions. Generally, they cure through a chemical reaction that takes place over several hours or days, forming a resilient rubber-like material.

It's important to follow the manufacturer's instructions and guidelines when using polysulphide sealants to ensure proper application and achieve the desired results. Additionally, safety precautions, such as wearing protective gloves and ensuring adequate ventilation, should be observed during handling and application.

[market-insider]

Sustainable Pressure Sensitive Adhesive Solutions: Emerging Opportunities

Pressure sensitive adhesive (PSA) is a type of adhesive that adheres to a surface when pressure is applied, without requiring any heat or solvent.It is a clean and efficient adhesive that does not require any messy cleanup or special equipment. PSA is made from a combination of polymers, tackifiers, and other additives that give it its unique properties. It is known for its high level of tackiness, which means that it can adhere strongly to a surface even with a light amount of pressure. This makes it a popular choice for a variety of products, such as tapes, labels, stickers, and other adhesive materials. One of the benefits of PSA is that it is easy to use and can be applied to a wide range of surfaces, including paper, plastic, metal, and even fabric. It also provides a strong, reliable bond that can withstand a variety of environmental conditions, such as temperature and humidity changes. Overall, pressure sensitive adhesive is a valuable type of adhesive that is used in a wide range of products and applications. Its unique properties make it a popular choice for many industries, and ongoing research and development are helping to improve its performance and expand its potential uses.

The pressure sensitive adhesive (PSA) market was seeing several developments, including new product launches and strategic partnerships. One trend was the increased demand for sustainable and eco-friendly PSAs. Many companies were launching new products made from renewable materials, such as bio-based or recycled content.Another development was the growing use of PSAs in the medical industry. With the COVID-19 pandemic driving up demand for medical supplies and devices, PSAs were being used more frequently in applications such as wound dressings, diagnostic tests, and medical tapes. Overall, the pressure sensitive adhesive market was seeing ongoing innovation and growth in a variety of industries, driven by demand for sustainable and high-performance adhesives.

Gain deeper insights on the market and receive your free copy with TOC now @: Pressure Sensitive Adhesives Market Report

Radiation cured PSAs are estimated to witness the fastest CAGR over the forecast period. They are typically based on acrylic formulations and provide an ideal solution combining balanced performance, good weather resistance, and advantageous processing. New product launches along with extensive R&D in radiation cured technology are expected to propel the segment growth over the forecast period. Packaging industry, especially food packaging, is one of the most significant end-use industries. PSA labels and tapes help maintain the brand image of the packaged product and are compatible with numerous substrates and coatings.