#PitcoParts

[partsfe005]

Pitco PTPP10539 Knob - Thermostat, Fryer, F/C, 400-200F | PartsFe

The Pitco PTPP10539 Knob - Thermostat is a crucial control component for Pitco fryers, specifically designed for full-control (F/C) models, allowing precise temperature adjustments within a range of 400-200°F. This knob directly interfaces with the fryer's thermostat, enabling operators to accurately set and maintain the desired frying temperature.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Knob - Thermostat that ensure long-lasting performance.

Order Pitco PTPP10539 Knob - Thermostat, Fryer, F/C, 400-200F today! Shop Restaurant Equipment Parts & Accessories at PartsFe with same-day shipping, available at the best prices.

[restaurantequipment003]

Pitco PT60125501 36" Armored Thermopile, W/ PG9 Adaptor - PartsFe

Pitco PT60125501 Armored Thermopile with PG9 Adaptor is a perfect commercial deep fryers and braising pans component designed for safe and effective operation. This 36" armored thermopile operates at 750 mV and has two lead wires with spade terminals for easy two screw mounting. The fryer is compatible with different brands of common fryers, including Anets, Dean, Frymaster and Groen, giving it versatile characteristic that is essential in professional kitchens.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Fryer Armored Thermopile that ensure long-lasting performance

[partsfeuk004]

Pitco P6071457 Pilot Assembly | PartsFe UK

The Pitco P6071457 Pilot Assembly is a high-quality replacement part designed for Pitco fryers. It ensures reliable ignition and consistent performance of the fryer’s burner system. This pilot assembly includes a thermocouple and a flame sensor, ensuring safe and efficient operation.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Pilot Assembly that ensure long-lasting performance.

[restaurantequipmentparts004]

Pitco PP11001 Nat Gas Bleed Gas Actuator - PartsFe

The Pitco PP11001 Fryer Natural Gas Bleed Gas Actuator is an essential part used to control the flow of the gas. This has a 3/4” FPT size and 300,000 BTU capacity to control the flow of gas during frying to enhance efficiency. This actuator improves safety by preventing gas leakage and ensuring constant heating which is essential when obtaining the finest frying outcomes.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Fryer Natural Gas Bleed Gas Actuator that ensure long-lasting performance

[partsequipments]

Pitco P6072404 Fryer Crumb Screen, 23" X 23" | PartsFe

The Pitco P6072404 Fryer Crumb Screen, measuring 23" x 23", is a vital accessory for Pitco deep fryers, designed to enhance the quality and longevity of frying oil. This screen is placed at the bottom of the fryer's fry pot, acting as a filter to capture food particles and crumbs that accumulate during the frying process. By preventing these particles from settling and burning, the crumb screen helps maintain the purity and extend the lifespan of the frying oil.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Fryer Crumb Screen that ensure long-lasting performance.

[partsfeuk003]

Pitco B7510031-C 45C+ Conversion Propane to Natural Gas | PartsFe UK

Manufacturer Name: Pitco

Product Number: B7510031-C

OEM Part Number: B7510031-C

Product Description: 45C+ Conv Pro To Nat

The Pitco B7510031-C 45C+ Conversion Kit allows for the easy conversion of Pitco 45C+ fryers from propane to natural gas. This essential accessory ensures optimal performance, compatibility, and safety while offering a seamless transition between gas types in commercial kitchens.

To keep your restaurant running smoothly, it's crucial to invest in Pitco 45C+ Conversion Kit  that ensure long-lasting performance.

[partsfeca]

Pitco 60131801 Filter Return Ball Valve with 4 Flare Connections | PartsFe Canada

Pitco 60131801 Fryer Filter Return Ball Valve is an essential part for controlling the flow of the oil in filter return line. This three-way valve has four flare connections 3” x ½” and 1” x 7/16” to provide proper oil circulation and keep the proper frying conditions. It has a well designed structure so that it can be easily installed and operated without much breakdown improving the performance of the fryer.

To keep your restaurant running smoothly, it's crucial to invest in  Pitco Filter Return Ball Valve  that ensure long-lasting performance

[commercialkitchenparts]

How to Repair Pitco Relay Boards for Commercial Fryers

An efficient fryer operation is essential for food quality and productivity in a busy commercial kitchen. The Pitco Relay Board, necessary for ignition, flame supervision, and temperature regulation, is vital for maintaining fryer performance. Issues with this component can cause significant downtime. This guide will help you repair Pitco Relay Boards for commercial fryers, minimizing disruptions and ensuring consistent kitchen productivity.

Understanding the Pitco Relay Board

The Pitco Relay Board is an integral component of the electronic ignition control system in Pitco's commercial fryers, griddles, and ranges. This specialized board plays a crucial role in managing several key functions that are essential for the efficient and safe operation of commercial cooking equipment.

Ignition Control: Sends precise signals to reliably fire the fryer’s burners every time the fryer is turned on.

Flame Supervision: Monitors and maintains the flame in a manner that keeps it lit, and makes adjustments to take care of errant situations that could lead to harm.

Temperature Regulation: It interfaces with sensors to regulate and maintain accurate cooking temperatures so that cooking results will be consistent and high food quality.

Preparing Pitco Relay Boards for Repair

Before you begin any repairs:

Disconnect Power: If you use an electric fryer, disconnect it from the power source or unplug it so that you don’t risk electrical shock.

Use PPE: Protect yourself as you repair it wear gloves and safety glasses.

Tools and Equipment Needed

To effectively repair the Pitco Relay Board, gather the following tools:

Multimeter: For testing electrical circuits.

Screwdrivers: For removing and replacing components.

Replacement Parts: Including relays, fuses, and other necessary components.

Repair Kit (Optional): For more extensive repairs.

Step-by-Step Pitco Relay Boards Repair Guide

Step1: Diagnosing the Problem

Check Electrical Continuity: Test electrical circuits for continuity using a multimeter. Check open or short circuits and measure voltage and resistance.

Identify Symptoms: Check if the symptoms you’ve observed include ignition failures or temperature inconsistencies, and should help you locate the problem.

Step2: Disassembling the Fryer

Turn Off and Unplug: Make sure the fryer is completely powered off before starting.

Open the Fryer Cabinet: Remove screws or fasteners to access the relay board. Refer to the fryer’s manual for specific instructions on disassembly.

Step:3. Inspecting the Relay Board

Visual Inspection:

Check for Physical Damage: Burnt or melted components, loose connections, corrosion, or damaged traces on the circuit board. Often, identifying these issues can tell you why the problem is happening.

2. Testing the Coil:

Measure Resistance: Use a multimeter to check the coil’s resistance. It should fall within the specified range. High or low resistance may indicate a faulty coil requiring replacement.

3. Checking the Contacts:

Verify Contact Operation: Use a multimeter in continuity mode to check the relay contacts. They should be closed when the relay is not energized and open when energized. If they do not change states as expected, they may need cleaning or replacement.

4. Coil Voltage Verification:

Check Voltage Supply: Ensure the coil receives the correct voltage when energized. Incorrect voltage could indicate a faulty power supply or control signal issue. Trace the circuit to identify and correct the problem.

Step4: Replacing Faulty Components

Remove Defective Parts: Carefully extract any faulty relays, fuses, or other components. Note their specifications for accurate replacement.

Install New Components: Replace defective parts with new, compatible ones. Ensure all components are properly aligned and securely connected.

Step5: Reassembling and Testing

Reassemble the Fryer: Reattach the access panel and secure it with screws or fasteners. Make sure all components and panels are properly aligned.

Reconnect Power and Test: Plug in the fryer and power it on. Test all functions, including ignition, flame supervision, and temperature regulation, to ensure the repair has resolved the issue and that the fryer is operating correctly.

Pitco Relay Boards Preventative Maintenance Tips

To ensure the longevity and optimal performance of the Pitco Relay Board, follow these preventative maintenance tips:

Routine Inspections: Regularly inspect the relay board to catch potential issues early and prevent larger problems.

Cleaning and Care: Clean the board with compressed air or a soft brush, avoiding harsh chemicals. Consider using a conformal coating for added protection.

Signs of Wear and Tear: Watch for unusual noises or inconsistent performance and address these signs promptly.

Repairing Pitco Relay Boards for commercial fryers is essential for maintaining efficiency and safety in your kitchen.  Following the steps outlined in this guide,  can effectively address common issues and keep your fryer in optimal condition. Regular maintenance and timely repairs will help minimize downtime and ensure consistent food quality. If you encounter complex issues or are unsure about any part of the repair process, seeking professional assistance is recommended.

[foodequipmentpartsca]

Pitco 60147801 Hi Limit Thermostat Switch With Manual Reset | PartsFe

Order Pitco 60147801 Hi Limit Thermostat Switch With Manual Reset today! Shop Restaurant Equipment Parts & Accessories at PartsFe with same-day shipping, available at the best prices.

[partsfe006]

Pitco 60070701 Hi-Limit | PartsFe

Order Pitco 60070701 Hi-Limit today!Shop Restaurant Equipment Parts& Accessories at PartsFe with same-day shipping, available at the best prices

[partsfe]

Pitco PP10417 Filter Pump | PartsFe

The Pitco PP10417 Filter Pump is a crucial component for maintaining optimal performance and extending the life of your commercial fryer. Designed for compatibility with various Pitco fryer models, this pump efficiently circulates hot oil, removing food particles and debris to prevent clogging and ensuring consistent food quality. Its durable construction and reliable operation make it a preferred choice for busy commercial kitchens. By regularly replacing this essential part, you can maintain peak fryer efficiency and enjoy the benefits of cleaner, longer-lasting cooking oil.

[partsfe005]

Pitco PTPP10538 Knob - Thermostat, Fryer, F/C, 400-200F | PartsFe

The Pitco PTPP10538 Knob is a crucial control component designed for Pitco fryers, specifically used to adjust the thermostat and regulate cooking temperatures. This knob allows operators to precisely set the desired frying temperature within a range of 400°F to 200°F, enabling accurate control over the frying process.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Knob - Thermostat that ensure long-lasting performance.

Order Pitco PTPP10538 Knob - Thermostat, Fryer, F/C, 400-200F today! Shop Restaurant Equipment Parts & Accessories at PartsFe with same-day shipping, available at the best prices.

[restaurantequipment003]

Pitco PP10262 Door Switch - PartsFe

Pitco PP10262 Door Switch is a magnetic door switch to increase the safety and efficiency of various commercial fryers including Forge AG14S, MG14S, TurboFry 2000 and others. A proximity switch sensor integrated into the fryer is able to make sure the fryer works only when the door is securely closed, and with only that way of making sure the fryer works, the risk of accidents is reduced substantially, and the fryer works optimally.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Fryer Door Switch that ensure long-lasting performance

[partsfeuk004]

Thermostat Knob For Pitco - Part# Pp10537 | PartsFe UK

Manufacturer Name: Pitco

Product Number: PP10537

OEM Part Number: PP10537

Product Description: Thermostat Knob

The Thermostat Knob for Pitco (Part# PP10537) is a durable replacement part designed to regulate temperature settings on Pitco fryers. Easy to install, it ensures precise control and consistent cooking performance, maintaining the efficiency of your equipment.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Thermostat Knob that ensure long-lasting performance.

[restaurantequipmentparts004]

Pitco B6718701-C S/S Temperature Probe Leads and Parker Fitting,2 Pin White Terminal Block - PartsFe

The Pitco B6718701-C Stainless Steel Temperature Probe is a must have accessory for accurate temperature monitoring in commercial fryers. This temperature probe includes 9" leads and a 1/8" male pin for easy connection to a white terminal block, and the robust 3/16" x 4" stainless steel sensor is 1/8" male pin.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Temperature Probe that ensure long-lasting performance

[partsequipments]

Pitco P6071785 1-1/4" FPT Drain Valve W/ Handle | PartsFe

The Pitco P6071785 Fryer Drain Valve is a 1-1/4” FPT valve used in the control of oil , this spare part enables efficient draining of oil in a short time with little mess and disruption on the cooking processes. The included handle is useful to make operation easy and therefore improve the convenience. This valve saves the time of washing the fryer and maintains the quality of oil the quality of fried foods that are produced. It has built quality hence its suitability for use in busy kitchen since it will not easily deteriorate in quality.

To keep your restaurant running smoothly, it's crucial to invest in Pitco Fryer Drain Valve that ensure long-lasting performance.