#Outdoor antenna repair

[wallmountmytv]

Understanding TV Satellite Repair: Essential Tips and Solutions

In the age of high-definition entertainment and advanced digital technology, a reliable satellite TV connection is more crucial than ever. However, like any technology, satellite TV systems are not immune to issues. When problems arise, TV satellite repair becomes a vital service to ensure uninterrupted access to your favourite shows and channels. This article explores the common issues with satellite TV systems, the importance of timely repair, and tips for effective troubleshooting.

Common Satellite TV Issues

Signal Loss: One of the most frequent problems with satellite TV is signal loss. This issue often manifests as a "No Signal" message on your screen or poor picture quality. Signal loss can result from various factors, including obstructions like trees or buildings, adverse weather conditions, or misalignment of the satellite dish.

Dish Misalignment: Satellite dishes are precisely aligned to receive signals from satellites orbiting the Earth. Even a slight misalignment due to wind, physical disturbances, or improper installation can lead to significant signal issues.

Receiver Problems: Your satellite TV receiver, the device that decodes and processes the satellite signal, can also encounter problems. Issues with the receiver might include malfunctioning components or outdated software, both of which can affect your viewing experience.

Cable and Connection Issues: Faulty cables or connections can also disrupt your satellite TV service. Damaged or loose cables may lead to signal degradation or complete loss of reception.

Importance of Timely TV Satellite Repair

Addressing satellite TV issues promptly is crucial for several reasons:

Minimizes Downtime: Quick repair ensures you experience minimal interruption to your viewing schedule. Prolonged outages can be frustrating, especially if you rely on satellite TV for entertainment or important programming.

Prevents Further Damage: Ignoring small issues can lead to more significant problems over time. For instance, a minor alignment issue could become worse and potentially damage your satellite dish or receiver if left unaddressed.

Cost-Efficiency: Timely repairs often cost less than extensive fixes or replacements. Regular maintenance and early intervention can help you avoid more significant expenses in the future.

DIY Troubleshooting Tips

Sometime recently calling an expert, you might need to undertake a few essential investigating steps:

 Check the Dish Alignment: Ensure your satellite dish is correctly aligned and free from obstructions. Sometimes, a simple adjustment can restore the signal.

Inspect Cables and Connections: Look for any visible damage to cables and ensure all connections are secure. Replacing damaged cables or tightening loose connections can resolve some issues.

Restart the Receiver: Sometimes, simply restarting your satellite TV receiver can fix temporary glitches. Unplug the receiver, wait a minute, and then plug it back in.

Examine Weather Conditions: Adverse weather conditions like heavy rain or snow can temporarily affect satellite signals. If this is the case, wait for the weather to improve and see if the signal returns.

When to Call a Professional

If basic troubleshooting doesn’t resolve the issue, or if you’re uncomfortable performing these tasks, it’s best to seek professional TV satellite repair services. Professionals have the expertise and tools needed to diagnose and fix complex problems efficiently. They can also perform a thorough inspection of your equipment and provide recommendations for maintaining optimal performance.

TV satellite repair is an essential service for maintaining a seamless entertainment experience. Understanding common issues and knowing when to seek professional help can save you time, reduce frustration, and ensure you get the most out of your TV satellite repair. Whether you’re dealing with signal loss, dish alignment problems, or receiver issues, timely and effective repair is key to enjoying uninterrupted TV programming.

[varleyelectric]

Wall Lightsl Installation Service In Shoalhaven - Varley Electric

These lights are mounted onto the wall and can be used inside as well as outside the house. They provide sufficient illumination and are also used for security purposes in houses. Some of them are equipped with motion sensors or burglar alarms that go off when an intruder tries to break in. The wall lights placed outside the house are usually larger, offering better coverage.  https://varleyelectric.com.au/outdoor-lighting-a-guide-to-exterior-illumination/

[a-view-without-light-pollution]

Part 3

THE REGULAR SCHMEGULAR. MEET THE SQUATTER---------

The job was easy, up to 69th floor, cross the hallways and office doors, reach the SOLDIER correspondence office, drop the packages at the front desk, let the guy at SHINRA sort who they went to, get paid. JOB DONE. But as it gets with "safe and steady"..the thrill is gone..where's the danger? WHERES THE FUN??

Maybe we can get into some trouble today? Well heck! Delivery packages to SOLDIER floor were late tonight..and the floor seemed sleepy, no SOLDIERS pacing around waiting for assignments...no busy office workers going about the floors. Tonight, you decide to explore, carrying a few tools, maybe sneak into some rooms or do some climbing. THIS WAS THE HIGHEST BUILDING IN MIDGAR! The view of the city oughta be killer, so tonight's the night you get up to the highest point of the building and seek the stars.

Packing extra tools in the backpack and lugging several packages for SOLDIER correspondence office, you set off. Up to 69th floor, passing hallways and doors, you reach the "SOLIDER CORR" office to find a note reading "LEAVE ALL PACAKGES IN THE LOCKBOX. BACK IN 4 HOURS"..JUST MY NIGHT! Quickly dropping off all 15 packages, you take off, but instead of heading back down the elevator, you take one of the balcony doors along the main corridor next to the elevator. Big ceiling to floor windows meant to light up the halls with natural daylight, now an eerie green glow at night...the reactors surrounding Midgar.

The breeze outside is cool and inviting and Midgar is a carpet of twinkling lights, cast green at this time of night, like a gritty LO-FI photo of a sick city.

The view is amazing..but you wanna go higher!! With a bit of snooping, you find that the spacious outdoor balcony has some type of access ladder to what appears to be maintenance passages. Most likely for repairing of building dish antennae, window repair, and who knows what else but the best part? Access to vents that lead back into the building! Right before heading in the vents, you spot yet another ladder, but this one is hidden and locked. Nothing your tools can't get past. Here, the ladder leads to a walkway... a GLASS WALKWAY that seems to circle the outside of this side of the SHINRA building. The complicated nature of this structure is...WEIRD, but questions later, exploring continues. How strange that this glass walkway seems to be "mirror shine" on the outside, SHINRA has its own way of doing things.

Awe-struck at this weird magic-land, glass walkway you continue..expanse of MIDGAR tiny and twinkling...but something catches your eye. The OTHER side of the walkway (the one that runs along the side facing the SHINRA building) faces offices you can LOOK INTO! ODD... but with SHINRA, everything was odd.

The midnight hour had quiet offices, small lights blinking strange signals on phones and fax machines that were sleeping, unused in the night. The glass walkway dips a bit and shows you a different floor to observe... THE SOLDIER FLOOR! ok...ok..ok...what to do?? You've been out here 45 minutes, there's time!

OBSERVING SOLDIER floor from above unnoticed?! LET'S DO THIS! There's gotta be plenty of dirty, underhanded stuff to spy on! Unfortunately, SOLDIER floor offers nothing but views into SOLDIER waiting rooms, TVs, empty chairs, soft empty couches...the floor was silent? I guess someone's being hung out to dry. NOTHING WORTH SNOOPING ON! Except....could it be? Yes! movement! Movement in a training room off to the side of a hallway..a young man. DOING SQUATS AT 1:45 AM?

Yes.. there he is. A strong, well-built man, with a frenzy of flowing black spiky hair with.....with a sword on his back? Holy hell, that's the biggest sword you'd ever seen!... doing squats.

From here, you can't hear him, but he's... he's counting them, smiling with EVERY squat completed, confident, and beaming. Squatting done..push ups started.. counting and beaming again, then back to squats. There wasn't a single thing alive or moving in that moment, on that floor but this man, doing his squats, and you, well...you can't pull away....what's so interesting?

It's HIM...he looks HAPPY and confident, smiling. He finishes, but he's got energy, pacing the floor, flipping through his phone, laughing, and running to a nearby vending machine.

Are all SOLIDERs this energetic? You figured giving your life away to SHINRA in it's army wouldn't leave you with enough time or happiness to smile or enjoy life, but there he was, this guy..smiling and laughing on his own. That's really all it took....the building vents forgotten, digging up dirt on SHINRA forgotten, even the carpet of twinkling lights that was Midgar forgotten.

All that was worth watching up here was the young man and his energetic squats.

[smartdatatv]

The Art and Science of Antenna Placement

Optimizing TV Reception for Toowoomba Homes

Imagine this: It’s game night in your Toowoomba home, the snacks are ready, the excitement is high, and as the whistle blows for kickoff, your TV screen freezes. Poor antenna placement could be the silent villain here. While many people assume buying a quality TV antenna Toowoomba service solves all problems, where and how you install it plays an equally crucial role in your viewing experience.

The Overlooked Factors of Antenna Placement

Most articles stress finding the "highest point" or "facing the broadcast towers," but the real science dives deeper. Antenna placement is influenced by several nuanced factors, including electromagnetic interference (EMI), terrain, and even the materials in your home's walls. Studies reveal that poor placement can decrease signal strength by up to 50% despite being in a strong signal area【8†source】【9†source】.

Key Insights for Effective Placement

Height Matters, But Context is King While higher placements often yield better results, you must also consider the antenna's proximity to obstructions like trees, neighboring buildings, and metal roofing, which are common in Australian homes. Using advanced tools such as Computational Electromagnetic Modeling can optimize placement, especially in complex environments【9†source】.

Orientation and Polarization TV antennas in Australia often need to align with horizontally polarized signals. Misalignment, even by a few degrees, can weaken your reception significantly. Using a compass app or a professional service for alignment is highly recommended.

Signal Overload in Urban Areas If you're in central Toowoomba, an amplified antenna might overload due to the proximity of multiple broadcast sources. This paradoxical issue causes poor reception despite strong signals. In such cases, non-amplified antennas are often more effective【8†source】【9†source】.

Wind and Weather Resilience The Queensland climate brings frequent storms, and an improperly secured outdoor antenna is susceptible to wind-induced misalignments. Opt for corrosion-resistant mounts and reinforced installation to withstand these conditions.

Why Choose Professional Installation?

Advanced antenna placement requires specialized knowledge, tools, and experience. Services like TV Antenna Installation Toowoomba take the guesswork out of the process by providing tailored solutions for local terrains and signal conditions. Professionals use tools like signal analyzers to pinpoint the strongest signal location and ensure long-term stability.

Fun Fact: Antenna Placement and Solar Panels

A lesser-known interference source? Solar panels. Studies show that improperly shielded inverters in solar systems can create EMI, disrupting your TV signal. This is particularly relevant as many Toowoomba homes adopt solar energy solutions【8†source】【9†source】.

The Toowoomba Advantage

For local residents, balancing rural terrains and urban overlaps can be challenging. Opting for a professional antenna service in Toowoomba ensures optimal placement, preventing interruptions during critical moments—whether it’s the news, your favorite series, or the big game.

In conclusion, antenna placement is both an art and a science, requiring attention to technical details and environmental factors. If you're struggling with reception or need reliable advice, consider TV antenna repair Toowoomba or antenna installation Toowoomba services tailored to your home’s unique requirements. With the right approach, you’ll enjoy crystal-clear viewing all year round.

[sysdo]

Common Applications of Telescopic Masts in Various Industries

Telescopic masts are versatile, extendable structures that have become invaluable tools across multiple industries. Their ability to extend to great heights and retract for easy transport makes them essential in applications ranging from communication and surveillance to broadcasting, weather monitoring, and even emergency services. The following explores how telescopic masts are commonly utilized across different fields.

In telecommunications, telescopic masts are used primarily for elevating antennas, radios, and satellite dishes. These masts allow telecom companies to improve signal strength and expand coverage. Mobile network operators often deploy telescopic masts to extend the height of antennas, particularly in rural or difficult-to-reach areas where traditional infrastructure is limited or not feasible. During emergencies or large-scale events, temporary communication stations are also set up with telescopic masts to provide reliable connectivity, ensuring that mobile networks stay functional in challenging environments.

The broadcasting industry also benefits significantly from telescopic masts. For both television and radio broadcasting, these masts provide a stable platform for positioning antennas or cameras at elevated heights. In live event broadcasting, such as sports, concerts, or outdoor shows, telescopic masts allow cameras to capture aerial footage, giving viewers a dynamic and expansive view of the action. These masts also play a crucial role in transmitting signals over long distances. Broadcast stations rely on telescopic masts to position transmitters or antennas at high altitudes, improving the reach and quality of signals.

In the field of surveillance and security, telescopic masts are commonly used to elevate cameras, sensors, and lighting equipment. This capability is especially useful in large, open areas or urban environments where monitoring needs to cover vast spaces. Security agencies deploy these masts to enhance their surveillance systems, capturing footage from higher vantage points. In military and border security, telescopic masts offer an efficient solution for monitoring sensitive locations, providing a mobile and flexible approach to perimeter defense and surveillance.

Weather monitoring is another area where telescopic masts have a significant impact. Meteorological stations utilize these masts to position instruments such as anemometers, weather balloons, and radar systems at varying heights. These devices collect crucial data on wind speeds, temperature, pressure, and humidity, which helps meteorologists predict weather patterns. Telescopic masts are particularly beneficial in providing accurate readings from different altitudes, which can be essential for forecasting in areas with complex weather systems.

In construction, telescopic masts support various temporary applications, including providing elevated lighting and aiding in the inspection of tall structures. Construction sites often require masts for temporary lighting solutions, especially in areas where scaffolding or other infrastructure may not be practical. These masts can be quickly deployed to ensure the safety of workers and provide clear visibility for tasks taking place at night or in low-light conditions. Similarly, telescopic masts are used for maintaining and inspecting high-rise buildings, towers, and other structures that require regular checks or repairs.

The emergency services sector also relies on telescopic masts for rapid deployment during natural disasters or large-scale emergencies. These masts can quickly support communication systems and lighting equipment, crucial in situations where infrastructure has been damaged. In such cases, they help ensure that first responders can maintain contact and operate safely in challenging conditions.

Finally, telescopic masts have applications in the military, where they are used for tactical communication, radar deployment, and surveillance. Their mobility and ability to quickly deploy in the field make them ideal for use in remote or hostile environments, where they can be raised to provide crucial support for military operations, such as communication and reconnaissance.

In conclusion, telescopic masts are indispensable in a wide range of industries due to their flexibility, ease of use, and ability to reach elevated positions quickly. From telecommunications and broadcasting to security, weather monitoring, construction, and emergency response, these masts offer a practical and efficient solution to meet the needs of modern industries. Their widespread use continues to expand as technology evolves, making them a vital tool across various sectors. Source: https://headsettactical.wordpress.com/2024/11/22/common-applications-of-telescopic-masts-in-various-industries/

[metrovanteena]

A complete guide for basic Antenna Repairs

Have you ever experienced your favorite movie being cropped or the images pixelated while watching TV? The culprit could be interference with your TV signal, caused by objects like mountains, tall buildings, trees, or even bad weather. Fear not! This comprehensive guide on basic antenna repairs will help you get back to enjoying seamless entertainment. If your DIY attempts fall short, remember you can always reach out to Metro TV Antenna for Antenna Repairs in Melbourne.

Identifying and Fixing the Antenna Problems

Before you fix your antenna, know what’s causing the trouble. Poor signal quality means pixelation on your TV or disruptions in audio. Complete signal loss is when there’s no signal on your TV or radio, with sudden interruptions during your favorite programs.

To check what’s wrong, use signal strength meters. They help you see how strong your signal is. Also, look at your TV antenna for problems like bent parts or rust on connectors. These checks can tell you if your antenna needs fixing.

DIY Antenna Repairs and Essential Tools

For those who like doing things themselves, there are simple fixes you can try at home. Fix loose connections, move your antenna to a better spot, and repair damaged parts.

When fixing, having the right tools is important. You need a coaxial cable cutter to cut cables neatly and a signal strength meter to measure well. Safety gear, like gloves, is important, especially for outdoor TV antenna. If you need to climb, a strong ladder is useful.

Check Cable Connections: Ensure that the cables connecting to the transmitter housing are correctly installed and not loose.

Optimize TV Signal: Set your TV to the most frequently used channel to check the signal quality. Conduct an automatic or manual scan of TV channels to ensure your antenna is picking up signals effectively.

Replace Damaged RF Cable: If the RF cable connecting the antenna to the TV is damaged, replace it to prevent interference with smooth transmission.

Adjust Antenna Position: Experiment with the position of the antenna until you find the one that provides the best image quality.

Increase Antenna Height: If image quality remains unsatisfactory, elevate the antenna at least a hundred meters higher to reduce interference and strengthen signal reception.

Use Signal Amplifiers: Install signal amplifiers to boost the signal strength from the antenna to the converter, reducing interference and ensuring clear reception. Confirm that signal repeaters are powered on.

Optimize Indoor Antenna Placement: When using an indoor antenna, reposition it near a window to reduce obstacles and enhance signal strength. Keep it away from computers to avoid signal interference.

When to seek professional help

Knowing when to seek professional help for antenna-related issues is crucial for a hassle-free solution. Consider reaching out to experts like Metro TV Antenna in the following situations:

Persistent Problems: If you’ve tried DIY fixes, but the issues persist, it’s a clear sign to call in the professionals. They have the knowledge and tools to address complex antenna problems effectively.

Complete Signal Loss: If your TV or radio has no signal at all, and sudden interruptions are a recurring problem, it’s time to seek expert assistance. Professionals can identify and fix the root cause promptly.

Technical Expertise Needed: Antenna systems can be intricate. If you lack the technical know-how to diagnose and solve issues like poor signal quality, it’s wise to enlist the help of professionals who specialize in antenna TV repair.

Safety Concerns: Climbing onto roofs or using specialized tools can pose safety risks. If you’re uncomfortable or lack the necessary safety equipment, it’s safer to leave the job to trained professionals who can handle it safely.

Efficiency and Time Savings: Professionals have the experience to quickly pinpoint and fix antenna problems. If you value your time and want a speedy resolution, calling in experts is the most efficient way to get your TV back on track.

By recognizing these scenarios, you can make an informed decision to seek professional help, ensuring a reliable and lasting solution to your antenna issues. Metro TV Antenna, with its expertise and commitment to customer satisfaction, is a trusted choice for professional TV antenna repairs.

Why Choose Metro TV Antenna

Metro TV Antenna is the best choice for fixing antennas because we have a team of experts who know a lot about antennas. We make sure our prices are fair and won’t break your wallet, especially in Melbourne and all over Australia. It’s easy to book with us – just call 0421 094 024, and we’ll make sure you can watch your favourite shows without any problems. We’re really good at quickly figuring out and fixing television antenna repair issues.

We have all the tools we need, like cable cutters and signal meters, to do a great job. Safety is super important to us, so we always wear the right gear to keep you and us safe. People like us because we’ve fixed lots of antennas and are known for doing a good job. Choose Metro TV Antenna, and you won’t have to worry about your TV – it’ll work perfectly, and you can enjoy watching your shows without any issues!

Conclusion

Don’t let TV signal issues dampen your entertainment experience. Follow these simple steps for TV antenna repair, and if needed, trust the experts at Metro TV Antenna to keep your signals clear and your favorite shows uninterrupted.

[electricianservicesmelbourne]

Exploring Marlec Electrical: LED Installation, Residential Electrician Services, and TV Antenna Installations in Melbourne

Are you looking to enhance the ambiance and functionality of your home in Melbourne? Look no further than Marlec Electrical, your trusted partner for all your electrical needs. From LED installation to residential electrician services and TV antenna installations, we're committed to providing top-notch solutions that elevate your living space to new heights.

LED Installation: Brighten Your Space, Save Energy

Upgrade your lighting with our LED installation services. LED lights not only brighten up your home but also offer significant energy savings compared to traditional lighting options. With Marlec Electrical, you can enjoy expert installation services tailored to your specific needs. Whether you're looking to illuminate your living room, kitchen, or outdoor spaces, our team ensures seamless installation for optimal lighting performance.

Residential Electrician Services: Reliable Solutions for Your Home

At Marlec Electrical, we understand the importance of a safe and reliable electrical system in your home. Our team of experienced electricians is equipped to handle a wide range of residential electrical needs, from wiring upgrades and electrical repairs to circuit installations and safety inspections. Rest assured that your home is in good hands with Marlec Electrical, where safety and quality are our top priorities.

TV Antenna Installations: Crystal-Clear Entertainment

Say goodbye to fuzzy reception and interrupted viewing experiences with our TV antenna installation services. Whether you're setting up a new entertainment system or upgrading your existing setup, our experts ensure precise antenna installation for optimal signal strength and clarity. Enjoy crystal-clear reception of your favorite TV channels and seamless streaming experiences with Marlec Electrical.

Why Choose Marlec Electrical?

Experience: With years of experience in the industry, Marlec Electrical brings expertise and reliability to every project.

Quality Service: We pride ourselves on delivering high-quality workmanship and exceptional customer service, ensuring your complete satisfaction.

Affordable Pricing: Our competitive pricing ensures that you receive value for your investment without compromising on quality.

Licensed and Insured: You can trust Marlec Electrical for reliable and professional services, backed by proper licensing and insurance.

Get Started Today

Ready to elevate your home with LED installation, residential electrician services, or TV antenna installations? Contact Marlec Electrical today to discuss your needs and schedule a consultation. Our friendly team is here to assist you every step of the way, providing tailored solutions that exceed your expectations. Experience the difference with Marlec Electrical and transform your home into a haven of comfort and convenience.

[expressantenna]

Optimizing Viewing Pleasure: The Significance of TV Aerial Repair in Brisbane

In today's digital landscape, where streaming platforms and online content reign supreme, the television remains a steadfast fixture in countless households. Whether it's staying updated with current events, indulging in beloved shows, or fostering family bonds over movie nights, the TV serves as a centerpiece for shared experiences. Yet, the cornerstone of this entertainment hub lies in a single vital component: the TV aerial. In Brisbane, where signal reliability can fluctuate, ensuring the upkeep of your TV aerial is paramount for uninterrupted viewing enjoyment.

The Importance of TV Aerial Repair

Like any technological apparatus, TV aerials are susceptible to wear and tear over time. Various factors, including weather conditions, physical damage, or aging hardware, can lead to signal disruptions, pixelation, or total loss of reception. This underscores the indispensable role of TV aerial repair services.

Resolving Signal Challenges in Brisbane

Brisbane's subtropical climate exposes it to a spectrum of weather extremities, from scorching summers to torrential downpours and thunderstorms. Such conditions pose considerable strain on outdoor equipment like TV aerials, often resulting in signal issues, particularly during adverse weather spells.

For individuals grappling with erratic TV reception, engaging professional TV aerial repair services in Brisbane becomes imperative. Companies such as Express Antenna Services specialize in promptly diagnosing and rectifying aerial malfunctions, ensuring minimal downtime and maximum viewing satisfaction.

Expertise of Express Antenna Services

Express Antenna Services stands as a trusted entity in Brisbane, renowned for its dependable and swift TV aerial repair solutions. Boasting years of industry experience, their adept team of technicians possesses the proficiency and insight to address an array of aerial-related complications.

Whether it entails rectifying a damaged antenna, realigning misaligned apparatus, or transitioning to advanced technology, Express Antenna Services is equipped to deliver optimal outcomes. Their unwavering dedication to customer contentment ensures that every repair endeavor is executed with meticulousness and professionalism, guaranteeing peak performance of your TV aerial irrespective of external factors.

Convenience of Professional Repair Services

A key advantage of enlisting professional TV aerial repair services in Brisbane lies in the convenience it offers. Instead of grappling with DIY endeavors that may exacerbate the issue or investing hours in troubleshooting, outsourcing repairs to experts allows for a stress-free resolution process.

Furthermore, professional repair services streamline your time and effort expenditure in the long haul. By effectively tackling the root cause of the problem, uninterrupted viewing pleasure can be relished sans the exasperation of persistent signal challenges.

Conclusion: Place Your Trust in Express Antenna Services for TV Aerial Repair in Brisbane

In summation, TV aerial repair plays an instrumental role in preserving optimal viewing experiences, particularly in locales like Brisbane where signal reliability can be precarious. By entrusting your aerial maintenance needs to professionals like Express Antenna Services, you can revel in the assurance that your TV reception is in proficient hands.

With their expertise, efficiency, and unwavering commitment to customer gratification, Express Antenna Services guarantees seamless functionality of your TV aerial, furnishing you with crystal-clear signals and uninterrupted entertainment. Refuse to let signal discrepancies mar your viewing gratification—opt for Express Antenna Services for all your TV aerial repair requisites in Brisbane.

For further insights or to schedule a repair service, visit Express Antenna Services today.

[tow-bar-price-toowoomba]

The Potential Risks and Maintaining Safety of the Vehicle Occupants

Many people find push bumper visually appealing, as they can give the vehicle a more rugged and aggressive appearance. Installing a nudge bar can help personalise your vehicle and make it stand out from the crowd. They often come with installation instructions and can be attached using basic tools, making them a convenient addition to your vehicle. In regions where wildlife encounters are common, push bumper can act as a buffer and reduce the risk of damage to your vehicle in case of collisions with animals. It's important to note that the use of push bumper may be subject to regulations and laws in different jurisdictions. By absorbing the impact, they can help prevent injuries to both the vehicle occupants and the wildlife involved. Nudge bars Toowoomba often come with mounting points or pre-drilled holes, allowing for the installation of additional accessories. This customisation feature enables you to attach equipment like spotlights, light bars, winches, antennas, or recovery hooks, enhancing the functionality and versatility of your vehicle.

 For off-road enthusiasts, push bumper is beneficial as they provide an extra layer of protection when driving in rugged environments. They can shield the vehicle's front end from branches, rocks, and other obstacles commonly encountered during off-road adventures, minimising the risk of damage. Nudge bars offer added protection to the front end of a vehicle. They can absorb and distribute impact forces from minor collisions, reducing the risk of damage to the bumper, grille, headlights, and other vulnerable components. This protection can save you from costly repairs and help maintain the resale value of your vehicle. Some people install push bumper for their aesthetic appeal. They can give the vehicle a more rugged and robust look, enhancing its overall appearance. Many pushes bumper come with pre-drilled holes or mounting points to attach auxiliary equipment like spotlights, light bars, winches, or antennas. This feature allows for customisation and enhances the functionality of the vehicle, especially for outdoor activities or work purposes. Nudge bars are popular among off-road enthusiasts as they can provide added protection when traversing rough terrain. They can shield the front of the vehicle from branches, rocks, and other obstacles, reducing the risk of damage to essential components.

 Nudge bars are relatively easy to install, and they can be fitted to a wide range of vehicle models. In some areas, their installation and use might be restricted or require compliance with specific standards to ensure pedestrian safety and reduce the risk of severe injuries in case of accidents. Nudge bars are primarily installed to protect the front end of a vehicle from minor impacts. They can help prevent damage to the bumper, grille, headlights, and other vulnerable components in low-speed collisions or encounters with animals or debris on the road. To provide additional protection to the front end from minor collisions, brush, or wildlife impacts are usually made of strong materials like steel or aluminum and are designed to absorb and distribute impact forces, minimising damage to the vehicle. It's important to understand that while it can provide some protection in minor collisions as they may not be designed to withstand high-speed impacts or offer the same level of safety as other crash-optimising features like crumple zones and airbags.

[aerialsupnorth]

Paul Turnbull, the owner of the Aerials Up North, is the number one antenna/satellite installer in the Douglas Shire. He has provided Quality service with 25 years of experience.

Paul is an Accredited Domestic and Commercial service providers of Digital Antennas Installations, Hi-Fi Set up and Installation with fast and friendly service and Pensioner Discount. To know more, please visit our website - http://aerialsupnorth.com

At Aerials Up North we provide,

antenna installation in port douglas tv antenna installation in port douglas antenna service in port douglas digital antenna in port douglas satellite tv in port douglas digital tv antenna in port douglas tv aerial repairs in port douglas dish satellites in port douglas indoor digital tv antenna in port douglas outdoor digital tv antenna in port douglas

and much more. Enjoy our fast and friendly installation services! Call Now!

[pestexterminatorsampm]

The over the counter insecticide may give the satisfaction of seeing ants drop dead on the counters, but it’s not the best choice for dealing with sugar ants.The new ants pest control product technology combine a preferred ant food with an active ingredient that kills the ant after it brings a meal back to the colony to share with the queen ant. The ants you don’t see will die as well.

There are ways to prevent Sugar Ants from Invading the Home:

Old homes seem to attract sugar ants the most because of having have more cracks to sneak through and can just as easily find a way into newer homes too. Keeping the home clean is not enough for keeping these tiny insects away.

A must is to seal up the foundation and any cracks around the windows and doors. Another thing to do is to replace decaying wood frames and shingles. If the roof is old and damaged, it is best to replace that too.Spraying the foundation with a natural pesticide helps prevent the ants from even thinking about invading the home. If sugar ants are found outside the home, destroy it right away to prevent future visitors. The best option would be to call your pest control services experts and that is AMPM Exterminators. The treatment provided will be tailor made for the little armies of black ants. There can be multiple little sugar ant soldiers marching around the property.

Some of the Ways to keep Sugar Ants out of Food Products:

Place opened boxed and bagged goods such as cereals, cookies, fruit snacks and chips into sealed containers or bags. Store flours and sugars in airtight baking storage containers. Store honeys, syrups and molasses product in the refrigerator and just gently warm the product up when needed. Never leave sticky sugary snacks open on the counter because this will attract the ants to other food products in the home. Store breads and baked goods in the refrigerator or bread boxes that seal up. Wash dishes immediately. Do not allow to sit around unwashed. Never dump sugary foods down the garbage shoot in the sink because it will leave a sticky residue and attract ants. Taking out the trash as soon as it’s full or right before bedtime can go a long way to prevent ants from crawling into the kitchen. Never leave sticky foods outside near entry ways that lead into the kitchen. Keep open sodas, juices, coffees and teas in the refrigerator. Wiping down kitchen surfaces such as the microwave, stove, refrigerator, counter tops, tables, chairs and floors can keep sticky sweetness away,which helps keep the ants away.

What the little black ants look like:

Pavement Ants  are medium-sized(1/8 inch long). The pests vary in color from light brown to black with lighter legs and antennae. The head and thorax have longitudinal, parallel grooves and move slowly.

Where the pavement ants nest:

Pavement Ants got the name because of it’s habit of nesting under pavement slabs, such as sidewalks, driveways, and foundations. The ants usually nest outdoors in open soil or under stones or slabs. Outdoor nests are recognizable by the “dirt craters” the ants leave around the nest entrances. The ants will sometimes also nest indoors in walls or under floors. Often move indoors in the winter and nest near heating sources,such as radiators.

What Pavement Ants eat:

Pavement Ants feed on both sweet and protein foods. Also on sugary liquids like honeydew from plant-sucking insects such as aphids, scales, and mealybugs. The pests also feed on live and dead insects and plants.

Steps to prevent little black sugar ants invasion

Pavement Ants are easily controlled with baits. AMPM Exterminators will protect the home from pavement ant infestations by sealing cracks and crevices where ants could enter. Advising customers to repair water leaks.Also some extra advice for customers would be no over watering of plants,make sure to cleanup food spills, store food in tightly-sealed containers, and do not leave pet food out.

Natural ways of killing and  getting rid of sugars ants in homes and commercial business buildings

Killing sugar ants is fairly easy, and the surest way is to set out ant baits. There are several types to choose from, so it is a matter of making an educated decision. Sweet baits are the most common used method of killing sugar ants. Most all of these baits will contain boric acid, also known as Borax. Borax is usually non-toxic to humans, but ingestion isn’t recommended. If you have children or pets this style of eradication isn’t recommended. This mineral is poisonous to ants, and has the ability to kill a whole colony. The trap works by luring ants to partake in the sweet boric acid, from there the ants will then take a portion of it back to their dwelling. After the other ants consume the bait very soon the whole colony will be exterminated.

There are natural ways to control and kill sugar ants that are safe for children and pets to be around. One way is using white vinegar to clean surfaces instead of the bleach cleaner. The strong odor of vinegar isn’t pleasant, but will detract the ants from frequenting the counters. The acetic acid in the vinegar works as a cleaning agent, and will be just as effective as the bleach solution. Another natural method to repel the insects is whole cloves. The pungent scent of cloves seems to drive away ants, as it confuses their senses. Placing this spice along baseboards and under windows is a great way to deter the ants from entering the home or building. Bay leaves are a natural deterrent for these insects, and should be used exactly like the aforementioned cloves. Looking for a natural way to kill ants use boiling water by Locating the ant colony by following the ant trail, then pour boiling water into it. This will end the ants disturbing presence in your home.

[mollydsails]

November 17 - Molly D arrived in Vero Beach this afternoon, six weeks after leaving CT. If bad weather didn’t hold us up in Atlantic City, Annapolis, Beaufort (NC), and Charleston, we could have been in Vero about a week earlier. Doesn’t matter; we made it here before Thanksgiving, and that was our goal. So many of the fixed bridges along our journey did not have the minimum 65’ clearance, mainly due to the king tide. The windex and the VHF antenna are the highest points on Molly D’s mast. On all but one bridge, the windex and antenna had just enough clearance to clear the bridge. The Wabasso Bridge, the only bridge on today’s route from Melbourne, had a clearance of 63’ and Molly D requires 64’5”. With a tidal range of 6”, waiting for the low tide to occur 3 hours after we were at the bridge would not have helped at all. The decision was made to proceed slowly, because, after all, we did not have any other choice. The VHF antenna did twang on the underside of the bridge but no harm was done. Whew!

Vero Beach City Marina

Alone on the mooring for now. The marina will put up to 3 boats on a mooring. The cost of the mooring? $13.50 a night

The first of many tie ups at the dinghy dock.

The beach is a mile walk from the marina.

Waterfront park leading to the beach.

Banyan trees at an ICW waterfront park.

View from Riverside Cafe looking towards the marina.

The ICW waterfront park has a bike repair station.

The first of many beautiful sunsets that we are sure to see while in Vero.

David and I checked out the schedule of events at the performing arts center. Friday and Saturday nights free outdoor musical entertainment is provided. The farmer’s market is held in a parking lot in town on Saturday mornings and we can’t wait to go to it! We are also looking forward to the annual holiday light parade. The last time we saw the parade, the “floats” were mainly lighted Jeeps and boats on trailers. We have a chore list of items to be attended to on Molly D, so our time here won’t be all fun and games.

[maple-writes]

Dissidia final week

this took much longer than I thought it would, but here we go! Thanks again @dissidia-writeblr for your patience hosting!

It’s been a great time!

###

Sitara and Zeth made quick on their agreement. Within the hour they led Richard and Volt out of the city, and not long after the four of them were out of Torr and standing back at the base of the mountain. After being in the city the air felt so much quieter without the buzz of little robots overhead but the peace and quiet didn’t last long though as a shadow fell chilly over the clearing. They turned, and Volt squinted up at the airship that blocked out the sun. Surprising for it’s size, it was near silent as it approached.

Sitara turned towards them with a grin and Volt tore her eyes from the ship.

“Thank you so much for letting me study your tech! I’m sorry about the officials of Torr. I’m going to have Zerith, the captain of this ship, send you to Velaris. No one will follow you there. It’s abandoned. There won’t even be any of the beings. You’ll be safe. And here.” She pushed a packet of paper into Richard’s hands. 

He held it carefully, lifting the tucked-in flap to peek at the papers. Volt watched as he scanned the text and his eye widened.

“This is all the information I have on your tech. I also wrote down how to fix your broken tech as well. I hope this helps!” She grinned as a ladder came down from the airship. 

Richard re-sealed the packet, returning her smile. “I don’t know what to say, thank you so much.”

Sitara didn’t have a chance to respond before a woman with an eyepatch over her right eye climbed down the ladder and smiles at Sitara. “Where would you like me to take them?”

Sitara pulled out a pouch of money and hands it to the woman. “Velaris. They need to get away from here.”

“Wonderful! I’ve already sent others over there to get away as well. They’ll at least have company.” She looked over at Richard and Volt and bowed her head. “My name is Zerith, and I’m the captain of this humble vessel. Let’s get going.”

Richard and Volt returned the greeting, and after a brief goodbye to Sitara and Zeth, followed Zerith up the ladder and into her airship. As curious as she was about how the ship worked, more importantly how to operate it, Volt was grateful when Zerith left them alone to rest during the journey.

She and Richard sat on either side of a little table in a small side room, quiet with only a faint engine hum reaching through the metallic walls. Volt’s eyes wandered. Panels set in the wall probably led to electrical controls, or… Something. This ship was so unlike what she was used to she didn’t even want to bother guessing how it worked.

The soft thud of Richard setting the packet of papers on the table made her turn. He nudged it towards her.

“What do you think?” Richard said. “Can you use this?”

Volt picked up the packet and slide out the stack of papers. It was thick, more pages than she’d thought when Sitara had handed it off. The papers rustled as she thumbed through them. Notes, diagrams, schematics… Clearly the girl had been busy, and she seemed to know what she was doing too.

Volt tucked the pages carefully back into their packet with a hopeful smile. “I think letting her look at you turned out to be a good idea. Its detailed, clear, and I think it might just get us somewhere. I’m sure for the parts I don’t know how to do we can find a technician who can. I know a few people.”

“Really huh?” Richard returned her smile. “That’s great news.”

It was, wasn’t it? Volt ran her hand along the edge of the papers. Maybe this whole ordeal would turn out to be worth it after all. It was a weight off her shoulders at least to finally be getting somewhere, to finally have hope that she wouldn’t have to worry about him breaking down beyond repair.

His chair squeaked as he stood with a stretch and a yawn. “Well, I think I might try and get some sleep. You should too.”

“I had a nap in the workshop.”

“Yeah, but does that really count? It’s been a long day.” Richard jerked his head towards the hallway. “I think I saw somewhere comfortable around the corner.”

For a moment Volt considered arguing, but then maybe he was right this time. She sighed, letting her shoulders fall as she slipped off of her chair and tucked the files under her arm. It really had been a long day.

#

Hours later, Zerith announced over the intercom system that they were getting close, and Richard watched the approach through one of the little windows lining the corridor towards the ship’s exit. They passed over mountains, deserts, jungles, prairie, finally slowing as the ship descended over a forest and Volt called for him to hurry up.

They reached the forest floor and just like that, Zerith’s airship was gone, drifting silently farther and farther away until it disappeared over the canopy. Richard craned his neck to stare up at untamed branches tangling from tree to tree, draped with soft moss and laden with verdant leaves. The sunlight that filtered through them reached his shoulders stained green and cool. Even the air felt green, refreshing and earthy.

“You know,” He turned to Volt with a grin. “Of all places to hang out and wait, this isn’t half bad.” He stretched his arms above his head, cracking at least three joints with successive pops. “Don’t you think?”

Volt shrugged, but eyed the ground-level ferns warily. “They really meant it when they said this place was uninhabited.” She swallowed and stepped just a little closer to Richard’s side. “I’ve never been much into camping, there’s too much that could go wrong out here, too much to think about, too many unknowns. How long are we going to have to survive out here? Is it cold at night?” She shook her head with a deep sigh. “I think I prefer cities, at least then I know what to expect.”

“Hey, at least there’s no one here to worry about.” Richard leaned out in front of her, hoping to distract her before she worried herself too much more. “How about we start by having a look around?”

Volt sighed. “Fine.”

She let him lead the way through the undergrowth, watching every stick and leaf and rock with distrust. Sure, she was probably right about some of the things she was worrying about. Neither of them really had a whole lot of outdoors experience, neither really knew how long they were going to be stuck out here for, but for now at least Richard was more focused on how springy the dirt was under his feet and trying to figure out what noises were birds.

He glanced back over his shoulder. “Hey, do you think we’ll see a bear? Like a grizzly bear? I saw some on an old TV show a few weeks ago and they were pretty cool, I hope we get to see one here.”

“What?” Volt shook her head. “No, I sure hope we don’t see a fucking bear. Do you know how big those things are?”

“But they looked so nice just hanging around that river.” He grinned, wide and teasing. “Wouldn’t you want to just go and sit with them? Just hang out with them and—”

Volt gave his arm an exasperated smack. “No! Do not go sit in the fucking river with a bunch of fucking grizzly bears Rick.”

“Okay, okay,” he held his hands up before breaking into another grin. “What about cougars? How about—”

“No!”

“But they look so soft!”

Volt huffed, though by the tiniest tugging of a smile on her lips, she wasn’t as frustrated as she pretended to be. “You know what?” She pointed at him. “Sure. If we see a cougar go right ahead and pet it, see what happens.”

“I will!” Richard gestured dramatically towards himself with a smirk. “I’ll pet it and it’ll purr and it’ll follow us around and fetch—”      

“I think you’re thinking of dogs now.” Volt shook her head. “But why not? Go hang out with a pack of wolves while you’re at it.”

“Wolves come packaged?”

Volt sighed again, but this time couldn’t hide an amused smile. Her steps seemed a little less stiff, and her shoulders a little looser. Richard smiled as relief spread sweet through his chest. It was nice to see her starting to relax again.

“Very funny Rick.”

“Thank you. Though I guess by now I’ve scared off most of the wildlife anywhere near—”

Shouts.

Richard snapped his head towards the sound, antenna by the side of his head fanning out and quivering as he tried to find the source of the noise. Volt fell silent by his side. She glanced between him and the direction of the noise, waiting.

“We’re not alone,” Richard whispered. “Something’s happening over there.”

He hurried forward as quickly as he could without noise, Volt following close behind. The shouts got louder, yelling, screaming, snarling, human. The trees thinned out and they crouched behind two side by side trunks, peering out at the edge of the forest.

Crumbling ruins of what might have once been a settlement stood covered in moss and writhing with people fighting inside. Looked like humans, humans fighting against…

“What are those?” Volt stole his words.

They looked like people, but with wings on their backs covered in black and white feathers. A lot of them, fighting against the humans in the ruins.

Volt glanced at Richard. “Are those, are those the beings everyone’s talking about? They aren’t supposed to be here.”

“There aren’t supposed to be people here either.” Richard murmured.

He leaned forward, shifting his weight to one arm and trying to see more of what was going on behind the ruined walls. Something to make sense of the noise and the fighting and the wings. Something wasn’t right.

“Whatever it is,” Volt continued, “It’s none of our business.” She started to turn. “Come on, lets-“

A flash of a dark ponytail caught Richard’s eye and he froze, staring with wide eyes and a quickened heart.

“Will’s in there.”

“What?”

Richard watched, eyes locked on as much as he could see of Will as he fought against the winged people. He looked different, and fought different, but it was him without a doubt. Out of the corner of his eye, Zero was there too.

“Zero too.” Richard’s voice dropped to a growl, something whirring faintly as systems started to activate. “I can’t tell if they’re outnumbered. We can’t leave them.”

“Are you sure about this?” Volt whispered. “We don’t know how long you’ll have to recover between now and when we get sent back home. They could return, whatever they are.”

“If we win now that won’t matter.” His claws dug into the soft dirt, tensing to charge, eyes locked on the ruins ahead. The skin of his arms flushed with blood shunted to the muscle. “We owe them don’t we?”

Volt nodded. “I’ll find somewhere to scout. Watch for me.”

Richard returned the nod and sprung forward, tearing across the short clearing towards the ruins. He leapt the wall and slammed into one of the winged people that knocked Will to the ground before she could attack again. He landed hard on top of her but she slipped out of his grip just in time, escaping with only a gash across her shoulder.

She spun to face him again just as he lunged. He tore at her outstretched arm and pulled her forward, raking claws deep along her side and catching against solid ribs. Blood smeared hot and bright against his skin as she stumbled back, light and dark patches swirling across her skin.

Richard rushed for her again until a flash of red hair and a shout made him whirl. Zero fought two of them, the winged people, his back against a solid stone wall. Magic whirled all around them, fast and violent and desperate.

He ducked around debris scattered from a collapsed roof towards Zero. One of the winged people turned just as Richard caught his elbow and thew her back. He turned on the second and his claws met skin just under her ear as he tore across her neck.

She staggered back, blood welling immediately at the wound. Snarling, Rick turned from her to the other but before he could attack the winged man kicked him back, thrust his arm and sent a shock of magic flying past his ear.

The stone wall collapsed on top of him.

Richard didn’t move, stunned under the weight of the ancient stone on his back. The rock across his shoulders pressed down on his ribcage. He gasped, head spinning when he couldn’t take a breath. The fans, why weren’t the ventilation fans kicking in? They were working just last week. He gasped, heart racing and frantic in his compressed chest.

He shook his head out and brought his elbows in, pushing up just enough to free up space to breathe. His arms shook and his shoulders ached as he caught his breath. Shit. This was going to hurt for a very long time.

His hearing came back loud with shouts and magic crackling through the air, and Will’s voice in his ear.

“—okay? Hang on, Zero! Come help.”

Zero appeared on Richard’s other side, magic swirling over both arms as he helped Will shift the stone enough for him to wriggle himself free. He got to his feet and shook off the dust and pebbles. Good, nothing seemed broken, structurally at least.

“Are you okay?”

Richard gave a thumbs up, scanning the ruins for more of those winged people. They must have been busy elsewhere, fighting within what was left of the building, because for now at least they were alone.

He glanced back at Will and Zero. “What’s going on?”

“The Chikara—those guys with the wings—they captured our friend.” Will answered. “And now they want to take our magic and use it to torture more innocent people and make them fight to the death for eternity.”

For a second he could almost feel cuffs on his wrists and the sting of cold water on broken skin. He growled, narrowing his eye as he caught a glimpse of one of the Chikara through the ruins. “They’re going to regret that when we’re done with them.”

#

Volt skirted the ruins until she found what was left of what was maybe a small tower, maybe not, but definitely tall enough to see over the rest with enough of a ledge to hide. She scrambled up to the top and ducked down behind what was left of the low wall at the top, watching the battle below through cracks in the worn wood.

Glimpsed through the cracks in the structure, there were humans, and there were people with wings, and they fought with what must have been magic. Well, most did. A few looked almost as lost as she felt, fighting however they could. It was messy, disorganized, and whatever it was they were fighting over, it must have been important.

She scanned what she could see of the ruins and swore under her breath. She couldn’t see Richard anywhere.

“Enjoying the view?”

Volt jumped, whirling to be face to face with one of the winged people. Black and white flowed beneath his skin like spilled ink and he tucked his wings behind him. She instinctively reached for her gun before remembering it was still laying useless at home.

She took a deep breath and steadied herself. “What’s going on here?”

The man glanced down at the fight below. “This? This is a fight for our world.” He nodded towards a group of the humans. “These people are traitors dead set on destroying this world with magic they don’t understand. If you help us take care of them, we can help you get home immediately.” He looked at her again. “What do you say?”

Volt kept her mouth shut and eyes locked with his. What was she supposed to say? She glanced down at the ruins below as a movement caught her eye. Will and Zero helping Richard out from under a collapsed wall. She set her jaw and turned to face the winged man again.

Maybe he was right, and Will and Zero and all their friends running around down there were evil traitors hellbent on burning everything to the ground, but what did she care if something happened to this world? Of the two sides, only one had ever done anything for her or Richard.

“I’m afraid you’re too late to win me over.” She took a step back towards the edge of the ruined tower, glancing back over her shoulder to make eye contact with Richard across the ruins. Turning back to the winged man, she held one hand behind her back and beckoned for him.

The man frowned. “Are you sure? Don’t you want to go home?” He took a step towards her. “We can get you there right away, and these are traitors. They’re dangerous.”

Volt backed away, the back of her calf bumping into what was left of the low wall. “In my world I’m considered a traitor too.” She grinned. “A traitor twice over.”

A quick whistle came from the ruins below and Volt stepped up onto the ledge, her heels backed up against the open air.

“Tough luck.”

Before the man could react, Volt dropped from the ledge. Her stomach lurched until Richard broke her fall, catching her from the side and rolling along the ground. They came to a stop and Volt shook herself off, glancing up at the rooftop. The winged man was gone.

“Thanks, Rick.” She turned back to him. “How are you holding up?”

Richard groaned as he dragged himself up but stuck out a thumbs up anyway. “For now.” He grit his teeth and glared. “The Chikara tortured these people. They’re going to pay.”

“Do it.” Volt stood and offered a hand to Richard, her anger mirrored in his face. That winged bastard had the audacity to call them the traitors? “Tear them apart if you want, I’ll take care of you later.” She looked up as Will and Zero appeared, joined by others she didn’t recognize but were probably on their side. “I’ll do what I can, just give the word.”

[smartdatatv]

Why TV Antenna Installation Beats Streaming for Local Channels

It was a Sunday afternoon in Toowoomba, and Jack was all set for the big game. He’d recently subscribed to a streaming service, eager to access all his favorite local TV channels in crisp HD. But as the pre-game commentary began, his screen froze, buffering endlessly. Frustrated, Jack missed the game-winning goal while waiting for his connection to catch up. If only he’d stuck with the tried-and-true method—TV antennas.

Like Jack, many people in Toowoomba are turning to streaming services, only to discover they’re not as reliable as they thought. Let’s dive into why TV antenna installation in Toowoomba still reigns supreme when it comes to watching local channels.

No Monthly Fees—Just Clear Local Channels

Unlike streaming services that lure you in with free trials and then charge hefty monthly fees, installing a TV antenna is a one-time investment. Australians, on average, spend around $40 per month on streaming subscriptions, which totals $480 a year. Compare that to the cost of a quality antenna installation Toowoomba service, which can range from $150 to $300, and you’re looking at major savings over the long run.

With a TV antenna, you get access to free-to-air local channels like ABC, SBS, and 7TWO without worrying about ongoing fees. Plus, you get these channels in full HD without buffering.

Better Signal, Less Buffering

Streaming services rely heavily on internet connections, which means your ability to watch your favorite shows can be at the mercy of your Wi-Fi speed. In rural areas like Toowoomba, internet speeds can be unpredictable. According to the Australian Competition and Consumer Commission (ACCC), 23% of Australians experience internet speeds that are slower than what they paid for . This can lead to buffering and low-quality streams, especially during peak usage times.

In contrast, TV antennas don’t rely on internet connections. A properly installed antenna can give you high-quality, uninterrupted broadcasts regardless of internet issues. That means no more buffering during critical moments—whether you’re watching the local news or live sports.

Get More Local Content

One thing many people don’t realize is that not all local channels are available on streaming platforms. Services like 7Plus and 9Now offer limited regional coverage and often have delays in broadcasting live events. With a TV antenna, you can tap into a wide range of local channels, including regional news, weather updates, and community-focused programming that’s often unavailable or delayed on streaming platforms.

For residents in Toowoomba, this is crucial. You want up-to-the-minute updates on local events, not to wait hours for a stream to be uploaded. With antenna installation, you’re truly in the loop with what’s happening around you.

The Longevity and Low Maintenance of TV Antennas

While streaming services require constant updates and can experience technical glitches, TV antennas are low-maintenance once installed. The average lifespan of an outdoor TV antenna is around 10 to 15 years. Some Toowoomba homes still have functioning antennas from decades ago! Should anything go wrong, local services such as TV antenna repair Toowoomba service can fix most issues quickly, ensuring that you’re back to watching your local channels in no time.

Streaming devices, on the other hand, need to be updated, replaced, or upgraded much more frequently, not to mention the data usage they consume. This can lead to unexpected costs and frustrations over time.

Eco-Friendly and Reliable in Emergencies

When the internet goes down during storms or power outages, a TV antenna can still provide you with crucial updates from local channels. Unlike streaming services that are completely dependent on internet availability, antennas can keep you connected during emergencies. This can be a literal lifesaver when you need real-time news and updates.

Moreover, antennas are an eco-friendly option as they use less energy than streaming devices, which contribute to data center energy consumption. Choosing a TV antenna Toowoomba service is a small but meaningful way to reduce your carbon footprint.

Conclusion: The Smart Choice for Local TV in Toowoomba

While streaming services have their perks, TV antennas provide an unmatched experience for local channel viewing, especially in regions like Toowoomba. With no monthly fees, clearer signals, access to more local content, and low maintenance, TV antenna installation Toowoomba service is the smart choice for those who value reliable, high-quality television without the internet headaches.

So, whether you’re looking for a new installation or TV antenna repair Toowoomba service, investing in a good old-fashioned antenna could save you from the frustration Jack faced—and keep you cheering for every goal, live and in HD.

Sources:

ACCC Report on Internet Speeds in Australia

Research on Australian Streaming Subscription Costs

[keelywolfe]

FIC: Beneath an Aurora Sky ch. 15

Summary: The South Pole Station is equipped for research and Edge has always made sure things run smoothly for the inhabitants. His charges are meant to follow his rules and regulations, and in turn, he makes sure they survive in the arctic temperatures. It takes plenty of hard work and determination and Edge, along with his crew, can handle both.

He wasn’t counting on one of the newest researchers. He wasn’t expecting Rus.

Tags: Spicyhoney, First Time, Arctic AU, Hurt/Comfort

~~*~~

Chapter One | Chapter Two | Chapter Three | Chapter Four

Chapter Five | Chapter Six | Chapter Seven | Chapter Eight

Chapter Nine | Chapter Ten | Chapter Eleven | Chapter Twelve

Chapter 13 | Chapter 14

~~*~~

Read Chapter 15 on AO3

or

Read it here!

~~*~~

Edge spent the rest of the day in his quarters, not even venturing out for meals which would have earned anyone else a firm scolding. Perhaps it was childish of him, but right then he didn’t want to see Red or Undyne, and Rus didn’t deserve having to see him.

He settled for ration bars and followed his schedule as best he could, approving requests from the scientists to return to the outer research stations now that the storms had passed. He escaped briefly to work out in the greenhouse, striving for and failing the normal soothing that it brought, but otherwise remained in his quarters.

That day there wasn’t so much as a knock on his door. Red and Undyne knew him well enough to let him be and Alphys was certainly wise enough to know if she came, he’d end up comforting her.

The next morning, he forced himself to set aside his lingering resentment. He had a job to do and it wouldn’t be done by hiding away.

Rus wasn’t at breakfast. Edge wasn't surprised.

As an added bonus to his misery, no one else offered him a greeting as he sat at the table. That easy, unusual camaraderie between them and the scientists was gone, leaving only distance, and the span of the table between them may as well have been as wide as the continent. Despite whatever scorn Undyne often expressed about their common sense, none of them were fools. Gossip traveled fast and they’d obviously deduced something went wrong between him and Rus, and the researchers seemed to be standing by their own despite Rus being a Monster.

Edge didn’t blame them. No wonder he was only suited to live at the ends of the Earth. He couldn’t manage a normal relationship for two days.

He sat next to his brother and couldn’t help the bitterly amused thought that he had fallen from hero to outcast in the span of less than twenty-four hours. His own personal Paradise Lost. Red’s sockets were concealed by his sunglasses, but from his lowered head, his own guilt was still thoroughly consuming him. He would have to wade through on his own for now; Edge couldn’t blame him for his reaction, but forgiveness would have to be later.

Undyne was not present, likely taking her meals with Alphys, and their resident engineer was the one worthy of concern. None of this was her fault, but she’d surely been dragged in nonetheless. He made a mental note to check in with her, if only to reassure her that he didn’t blame her for any of this. The blame was his own and Edge would be keeping it.

Breakfast was already laid out, but before Edge could reach for any of the platters on the table, a plate landed in front of him with a clatter. Loaded with burnt toast and runny eggs, half of it falling off from the force of the throw.

Edge looked up to see Bonnie glaring down at him, her scarred face twisted with anger. Ah. It seemed that it wasn’t only the researchers who’d sided with Rus.

Next to him, Red started signing indignantly and Edge put out a hand, stopping him. "Don't."

He picked up the toast and bit into it, and the charred flavor on his tongue was like the taste of failure. He ate every bite methodically, scraping his plate for the last oversalted dregs. There were worse meals in his past and if Bonnie needed a target for her wrath, he would accept his due.

As he was carrying his cleaned plate to the dish rack, the kitchen door opened again, Bonnie carrying another tray out with the door swinging shut behind her. The meal on that was fit for a King of Monsters, fluffy pancakes drizzled with honey, Rus’s favorite, along with crisp bacon, golden yolks of eggs over easy, and a bowl of berries, fresh from the greenhouse.

None of the scientists still lingering offered a single indignant word about that indulgent feast and neither did Edge. Strictly speaking, meals weren’t supposed to be taken in private rooms unless there were extenuating circumstances. It seemed the entire station was deciding that this qualified. Edge only hoped Rus was in enough of an appetite to eat it.

Bonnie went through the hallway door with a bang and Edge turned back to the table to discover his brother vanished in the time it took him to wash his plate. He sighed and shook his head, heading back out.

Today seemed like a perfect day to work on repairs at one of the outskirt checkpoints, a never ending task, particularly after a storm. Edge logged himself at one that Rus never went to and headed out. It would be fair to Rus to try to avoid him, if that was what he wanted, and Edge would make sure his schedule was very visible. It wasn’t normal protocol, but if Rus didn’t want to see him until he left the station, Edge would make it easy for him and if he did…

Edge extinguished that hopeful thought before it could form.

The vehicle garage was empty, his brother nowhere in sight. If Edge was making himself scarce to Rus, then it seemed Red was doing the same to him. He sighed inwardly. This one rock thrown in their smooth pond was casting ripples that would last for some time yet. He’d give Red a few days and then corner him, if he had to.

There was no question he would forgive his brother. Edge couldn’t even be properly angry with him. He knew better than anyone what Red suffered through to earn his distrust of any of the Monster royalty, the cracks still littering his skull spoke volumes, and he could hardly blame Red when his reaction was no better. A piece of paper and a handful of questions was all it took for him to cast Rus into doubt.

Unbidden, memory came to him, of Rus’s smiles, that real smile he offered so shyly. Of the expression of purest wonder the first time he saw the aurora, of the way he cuddle in close as he slept, clinging with all his limbs as if afraid of being left alone—

Edge pushed that aside. He had work to do and that would last him far longer than any idle thoughts.

He gathered the equipment he would need and signed out a snowmobile, heading out to the furthest checkpoint.

It took him the better part of the day to clear the accumulated snow from the antennas, check over the solar cells and calibrate the equipment. By the time Edge headed back to the station, he was exhausted and bone-chilled despite his outdoor gear.

Careless of him, he knew better than to stay out too long. Monsters could handle the lower temperatures better than Humans, but eventually even they would succumb. The ride back only made it worse and he regretted not choosing a SnoCat for the journey, even if it would have taken twice as long. By the time he returned to the vehicle shed, he was shivering so hard he could hear the rattle of his bones over the roar of the engine.

Edge hastily signed the snowmobile back in and headed inside, clumsily stripping off his gear with numbed phalanges. The ache that came as they warmed was enough to make him hiss, but it was a pain was earned through stupidity, one he hadn’t felt since their first month here. Perhaps it was best things ended as they did, Edge thought sourly, he’d been off balance since Rus got off the ship. He needed to get his head on straight before someone got hurt.

He ignored the voice in the back of his skull slyly pointing out that someone was already hurt and headed towards his room to recklessly waste a shower token before dinner. The cold wouldn’t kill him, but a little comfort before facing those silent, accusing faces in the dining hall again would be a kindness.

As he went down the walkway to the living quarters, Edge heard raised voices from around the corner. The words themselves stilled him as much as his brother’s loud voice declaring, “look, i just want to talk, fashion victim.”

“my name is rus.” Edge closed his sockets, pained. Never had he sounded so cold, even that awkward moment they’d first met.

His brother went on, doggedly, “rus. you’re right, i get it. rus. i’m sorry, okay? i’m sorry. look, it’s not an excuse but we’ve had people here before who—“

Rus interrupted, his cool voice tight with underlying anger, “you’re right, it’s not an excuse. all you had to do was actually talk to me. woulda taken two minutes. thanks to you, i spent two hours straightening my notes after your little room search. i had to recalibrate all my equipment, since i guess none of my shit is important enough to worry about, not like yours is. you’ve all wasted enough of my time, now if you’ll excuse me...hey! let go!”

“that ain’t his fault, it was all me, all of it, wouldja just listen--”

Edge hurried around the corner to see Red gripping Rus’s wrist even as he struggled furiously to pull free.

“Red, let him go.”

They both jerked, two sets of eye lights flying over to him. It was his first sight of Rus since seeing him run away in tears and Edge’s soul lurched painfully. He was wearing the worn orange hoodie that hadn’t made an appearance since his first day here, the heavy sweatpants rather than the thermals Edge had given him. He looked tired, heavy shadows beneath his sockets, and Edge ached to think of the wasted energy, trying to catch up on his work. He hadn’t even considered what damage was done by going through his things, all the effort Rus would need to go through simply to continue his research. He couldn’t imagine how far behind Rus might be now, perhaps unable to complete in research in time.

If Rus needed to stay longer to finish, Edge would pay for it out of his own salary. Though he wasn’t sure Rus would welcome the chance, thesis or not. He might very well be the first person on the boat.

Red was still holding on, hard enough for bone to scrape. His sunglasses were on the floor, another pair broken, and his eye lights were blazing, flared crimson. That was a sight Edge hadn’t seen for a very long time and he held out his hands to his brother placatingly.

“That’s enough,” Edge told him, low. “Let him be.”

“no, it ain’t!” Red burst out, “it ain’t! it was my fault, all right?” He looked at Rus wildly, who only looked back stonily, still trying to twist away. “i put the bug in his head that you were up to something and i was wrong. i know my bro, i know he has trust issues! i shoulda checked more careful, i shoulda--”

“Red,” Edge broke in, gently. “Brother. Please. Let him go.”

The feral light in Red’s sockets dimmed, fading to their normal soft crimson glow. Slowly, reluctantly, his grip loosened, and the second he could, Rus wrenched away, stumbling back and clutching his wrist to his chest. His mouth worked, his eye lights darting between them, but finally Rus turned and walked quickly away. Edge watched him go until he turned a corner, out of sight.

Red only slumped back, sliding down the wall to the floor. He rested his forehead on his updrawn knees, wracked with brief, jolting quivers. Edge crouched next to him, not touching, only there if his brother needed him.

He waited until those intermittent shivers eased, then said, softly, “You need to leave him alone."

“i can’t.” Red’s voice was muffled into his knees, raw and cracked. “i can’t, boss. you were happy for the first time in ages and i ruined it."

“That’s not true,” Edge began. He might as well have saved his breath, Red only shuddered and went on.

“wasn’t your fault, it wasn’t! he don’t get it, he don’t know what you’ve been through, what we have!”

Edge laid a cautious hand on Red’s shoulder. His brother lifted his head, looking at him miserably. His knitted cap was askew, showing the first branching crack at the front of his skull and with gentle patience, Edge adjusted his hat to cover it again. Quietly, he asked, “And you know what he’s been through?”

Silence. He didn’t know what Red was thinking about, but Edge couldn’t help recalling Rus’s expression in the Rec room that night he watched Edge spar with Undyne. The sudden fear when she called for him to take her place.

Red looked away, eye lights on the floor as he swallowed heavily and whispered, “no.”

Edge nodded. “Neither do I. So, please, leave him alone. Let him do his work. He’ll be gone in a few weeks, anyway. Will you do that for me?”

The phrasing needed to be careful with Red, Edge knew, he excelled at crawling through loopholes to dig into whatever he found on the other side. This time Red only nodded, heaving himself to his feet.

“m’sorry, bro. fer everythin’” Red mumbled, shoes shuffling against the floor as he went the opposite way as Rus and rounded the corner.

Edge went to his room to take his own advice. Stood beneath the steaming hot water, letting it pour over him. There was nothing but his warming bones, the heavy patter of water against the walls of the shower stall. He very nearly used another token, forced himself not to be quite that wasteful as he’d regret it the next week, and stepped out into the cooler air to dry off.

He was barely dressed when there was a knock on his door. The temptation to ignore it was shameful. His duties to the other researchers had not lessened despite his personal issues. If they needed him enough to search him out, they deserved a chance to be heard out, even if it ended in a rebuke from him to submit all requests in writing.

When he opened the door, however, the last person he expected was standing there.

“Rus?” He didn’t dare hope and still, his soul sank a little when Rus only held out a sheaf of papers.

“thought you might want to see this,” Rus said tersely. He stuck his hands into pockets the moment Edge took the papers.

They were still warm, fresh from the printer and Edge looked down at the pages in confusion, “What’s this?”

“my thesis, since you’re all so interested. but it doesn't even matter what it says, because what it tells you is i'm a fucking astronomer. which the information packet i submitted should’ve already told you."

“Observing the Progression of an Active Galaxy Nuclei Through Fiber-Optic Spectroscopy,“ Edge read slowly. Such a dry title, it didn’t feel like Rus. Or perhaps it did, his lack of knowledge about Rus was where their problems began. “You’re studying galaxies?”

Rus’s mouth twisted. “something like that. i’ve already taken readings from the equator. just needed to get them from one of the poles to finish up.”

“This was what you were keeping a secret.”

“i wasn’t keeping it a secret!” Rus snapped. “or yeah, okay, i was, but it was just a tease, for fuck’s sake! because you’d think i was so fucking interesting if you knew what i’m studying, right?”

“Rus-“ But Rus wasn’t finished.

"do you even know how hard it was for me to get here?” he asked, low, “i was trying for scott station before i realized there was no way they'd let me in. tried a few others, but it was always more of the same. plenty of excuses but none of them wanted to admit it was because i was a monster. i got tired of throwing away money that i don't have for rejections, so i came here even though it cost a shit-ton more and i’d have to bring my own equipment. thought maybe if it was run by monsters…” Rus shuddered, his shoulders hunching. “you want some truths? okay, here's one. red was right about one thing. my sponsor? it's toriel. yeah, the queen. she...she was kind to me and my brothers when we ended up here. got us jobs, gave us a start.

Edge only stood, cooling papers in hand, watching as Rus blinked too hard, almost choking on his words as he said, “when i realized i wasn't getting anywhere with my applications, i swallowed my fucking pride and asked her to help. she pulled some strings to get my application on the roster.”

Though no one else was around, Rus’s voice lowered into a fierce whisper, “and i get that all of you are bitter about what happened, but even you can't convince yourselves that things were better with asgore in charge. after everything, she let you guys go your own way, didn’t she? no one is coming after you, no one sent me up here to spy! tori told me that you were honorable and i trusted her on that."

“Why didn’t you tell me?” Edge couldn’t help saying. Oh, he knew why, look at the way they’d reacted to the mere suspicion that the Embassy was involved. But Rus’s answer was not quite the one he expected.

“i didn't want to tell you because...i’m nobody in this world, okay?” Rus burst out, heaving out a shuddery breath, “my own brothers told me i was wasting my time on this when i could be doing something useful, but this is what i love. i busted my ass working double shifts to get up here to finish, tori said i should warn you, but i couldn't risk it, not after everything.” He lifted his chin, his eye lights gleaming fiercely. “and i’m gonna to do it. i don't need this shit, any of it. you were always a distraction i didn’t need.”

Dimly, Edge wondered how he’d never known it was possible to bleed without ever taking a wound.

"I'm sorry,” he said, softly.

“save it. i told you, i get it, i get why you guys are suspicious but that doesn’t mean i don’t get to be hurt! it doesn’t mean I have to forgive you.”

"It doesn't," Edge agreed quietly. “But I am so very sorry, nonetheless. You never gave me a reason to doubt you.”

Rus's expression crumpled, all his anger like so much tissue, "don’t do that, you can't...just stay away from me.”

He turned, walking quickly away and Edge carefully closed the door, the pages of the thesis still in his hand. Hardly a moment passed before there was another knock on his door. Edge didn’t allow himself to hesitate. He opened it and Rus was there.

He shivered despite his bulky sweatshirt and the emotions fluttering across his face were too quick to interpret, “look...can i come in?”

Edge only held open the door, and when Rus stepped inside, he sighed deeply, nervous fingers clattering lightly against his skull as he swept a hand over his head. “this is all fucked up, i know, but...could you just hold me for a little while?”

Wordlessly, Edge sat on the bed, reaching out to pull Rus into his arms. The pain clenched in his soul from the moment Red came to them yesterday morning loosened, easing as Rus settled against him. It was easier to hold each one other if they lay back, so Edge did, pressing his face into the pale curve of Rus’s skull to breath in the honey-sweet scent he thought he’d lost.

Fear lanced through him as Rus shifted, sitting up, but it was only to pull that oversized sweatshirt over his head. Beneath it he was only wearing a thin thermal shirt, hardly a barrier at all as he settled back against Edge. One hand gripped the front of Edge’s shirt, so tightly he could hear the bone creaking. Edge settled his own hand overtop it, loosening the grip until he could entwine their fingers. They lay together in silence for some time, only their breathing breaking it, until Rus muttered out, “this doesn't mean i forgive you."

No. Broken trust was as difficult to heal as the cracks across his brother's skull.

But it was a start.

tbc

[shantanu56]

Are you ready to conformal coat? Here’s why you might want to know.

Over the holidays, I had occasion to watch a National Geographic documentary on the April 2019 fire that took place in the Notre Dame cathedral in Paris. A segment of the show touched on how the city fire department utilized an unmanned, 1,110 lb. fire-fighting machine, lovingly called the Colossus, to enter parts of the inferno unsafe for human firefighters. Not only was this advanced unit charged with discharging 660 gallons of water per minute into the blaze and providing a live video feed and sensor data to provide valuable insights on the fire’s progress to nearby fire chiefs - it had to perform these and other duties under the duress of incredible heat, drenched in water, and withstanding various impacts and vibration from falling or fallen debris, including molten lead from the cathedral’s lead roof. Talk about hostile workplaces!* * You can read more about and see the Colossus in action, here. Needless to say, the story brought to mind the advances the electronics industry has made and continues to make in the arenas of mobility, connectivity, processing, and - especially in this instance - durability. After all, machines like this don’t just happen: From major systems, to sub-assemblies, to individual components, on down the line — they are painstakingly designed, spec’d, and built to perform in adverse conditions. Which brought to mind the increased importance of the protection afforded by conformal coatings. What is conformal coating? Conformal coating involves spraying or immersing a printed circuit board (PCB) or PCB assembly in a protective coating - in much the same way that a car manufacture or service shop applies a coating undercarriage of your car. The applied material ‘conforms’ to the irregular surface or landscape of a PCBA, including surface-mounted components, solder points, raised or etched circuits, component leads, through-holes, and more. Once applied, applied conformal coatings must dry or cure for a suitable period of time before additional processing, assembly, quality control, or other tasks can proceed. Once applied, such coatings can protect against any number of strains your circuit may encounter in the real world, including: -Moisture, oils, chemicals, solvents -Thermal stresses, including extreme heat and cold Vibration, abrasion, physical impacts, handling during shipping, regular use, or service -Dust, dirt, grime -Ultraviolet (UV) exposure and degradation -Unexpected electric shocks (transient voltage surges, aka: lightening), shorts, and static electricity -Radiation What are conformal coatings made of? Conformal coatings or ‘resins’ come in a variety of compositions to match your unique application or performance goals. While other materials are available, including a new breed of ‘nano’ coatings, the three major types of traditional coating material options are: -Apoxy Resin (AR) is a rigid coating that offers basic, low-cost dust and moisture protection. Apoxies are, though, susceptible to chemical solvents, which makes it easier to intentionally remove the coating to do rework and field repairs easier, even if it also makes them less-than-ideal for caustic industrial settings. -Silicone Resin (SR) is a flexible, hydro-repellent material suitable for high-vibration and/or outdoor environments. SR-based coatings also have excellent dielectric properties, so they can help isolate high-voltage (aka: eliminate arcing) or, inversely, help protect static-sensitive components or PCBAs. -Urethane Resin (UR) is a hard coating that offers even better moisture and chemical resistance than SR- and AR-comprised coatings, which makes them a frequent choice in mission-critical aerospace, defense, avionics, or medical applications. Key considerations of conformal coating For a material that measures only 1-5 microns in thickness - the particulars of conformal coating composition, characteristics, and application require a deeper discussion than this blog post allows. That said, I can say choosing the right conformal coating for your unique application can be guided by five high-level considerations: -What kind of protection do you require? As outlined above, different conformal coatings offer different levels of protection. To pick the right one for your project, list and rank your priorities - permeability to moisture, chemical resistance, dielectric performance, ability to withstand or adjust to thermal contractions/expansions, vibration, and so on - and then work with your PCBA supplier to choose the right one for your job. -What sort of production process or timing are you working with? Are you working with small volumes where application of the coating can be manual, or high-volume runs that demand automation? Can your production schedule withstand long or short conformal coating curing times? What sort of quality system regimen do you or your customer demand to ensure repeatability? These and other production and process aspects should be accounted for when choosing your conformal coating. Speaking of QA, will your PCB, assembly, or finished device have compliance requirements? Individual customers may have proprietary specs or requirements, but most applications for conformal coated PCBs and PCBAs are commonly assessed against two prominent, namely IPC-CC-830B (or MIL-I-46058C) and UL746E. -Will the end device or equipment require rework or even allow for in-the-field repairs? If so, some coatings are better suited than others. -What’s the budget? No surprise that a hard-nosed cost/benefit analysis will be needed in choosing your conformal coatings, just as it does with every other item on your BOM. Thankfully, the wide range of conformal resins, application techniques, and suppliers - and availability of emerging coating options - all but ensure there is an option to suit your task without too many trade-offs. Which applications require conformal coating? The length of this blog here again precludes an exhaustive analysis of environments and applications that would benefit from resin-coated electronics. Still, my opening story of the Colossus fire-fighting machine makes clear some emerging applications are particularly well-suited to ruggedized electronics enabled by conformal coated circuits. For instance: -Unmanned vehicles - Robots with fire-fighting capabilities are just the beginning of this fast-growing field. (Come to think of it, I wonder if any were or could have been used to save lives and property during the Oregon wildfires that plagued CST’s own region last July?) Similar equipment is being applied in mines, sites of industrial accidents, war zones and law enforcement applications, and deep-sea, arctic, and space exploration, among other extreme environments. -Internet of Things (IoT) - Enabled by nearly ubiquitous broadband access (including 5G), connected sensor networks, and insatiable demand for/insights from big data and machine learning are also driving electronic devices into harsh and remote environments: Think of far-flung water, gas, and oil pumps; all-season sensors deployed across forests, farm fields, and water systems; traffic, vibration, and erosion sensors dispersed across interstate highways, bridges, rail systems, and cityscapes. -Communications infrastructure - Having mentioned how communications networks are drawing IoT technology into challenging environments, the same can be said for the infrastructure comprising those networks themselves. Base stations, cell towers, satellite dishes, antennae, mobile wireless equipment, and even satellites are subjected to a wide range of environmental stresses, making them key candidates for conformal coatings among other protective measures. -Handheld technology - Aided by miniaturization, innovative packaging solutions, and IoT connectivity mentioned above, handheld devices and other types of portable equipment are also driving technology into environments requiring ruggedization techniques like conformal coating. Two examples of this trend would be mobilized medicine and laboratories that bring healthcare and science into ever more remote challenging geographies — and app-driven handheld tools that enable industrial technicians to perform in-the-field maintenance, diagnostics, and even repairs. Need conformal coating? CST is here to help. In addition to assisting you with design and manufacture of your PCBA, Cascade Systems Technology has the experience, expertise, and infrastructure to help you choose, engineer, and apply the optimal conformal coating for your unique application. From small runs dictated by complexity or by production-on-demand schedules - to continuous, high-volume runs requiring high levels of automation - CST has your PCBA and conformal coating needs covered! Contact me to discuss the possibilities, CST’s capabilities, or initiate a quote. - Shantanu R. Gupta, CEO, Cascade Systems Technology https://cascadesystems.net/