#KAreads | Explore Tumblr Posts and Blogs

xiaoquebanxiaoqueban · 4 years

Text

Changjiang good scenic spot sightseeing car scenic spot sightseeing car

however, when buying a car, people usually buy it in the daytime. Therefore, it is easy to ignore the inspection of the lights. The high beam, low beam, brake tail light and turn signal of the headlight should be taken into account. Check whether the brightness and flicker are at the same frequency. 4、 When purchasing electric sightseeing vehicles, we should also pay attention to the inspection of their tires. For the inspection of sightseeing car tires, we should not only look at the wear resistance, but also pay attention to whether the specifications of the tires are consistent. At the same time, we should also pay attention to whether the air nozzle caps of the two tires exist. For example, if they do not exist, the manufacturers should be required to supplement them.

The common problems of safe driving electric sightseeing car: 1. Before preparing for safe driving in advance, we should pay attention to check whether there are non motor vehicles or small animals around, especially the blind area of visual effect under the wheel. 2. In rainy and snowy days, do not brake quickly. Try to avoid puddles to enter the route of electrical equipment with waterproof beads, which will endanger safe driving. The safe driving mode of electric sightseeing car is only from two aspects. The electric sightseeing car is equipped with speed regulation and does not have speed regulation. The difference between them is that one must be in gear and the other is not. Have you learned it well?

Good scenic spot sightseeing bus in Changjiang, Before driving the electric sightseeing vehicle, 1. Make sure that the electric power is sufficient. 2. Visually check the following aspects of the tire: the depth of tread groove - whether there is abnormal wear, crack and damage - whether the wheel nut is loose - whether there are nails, stones and other foreign matters; 3. Check whether the functions of headlight, brake light and horn are normal; 4Check whether the forward, backward and braking are normal! Overload is prohibited, which will damage electronic components. 3、 The loading of the vehicle, the vehicle design has a certain load capacity. Please never overload

at present, water battery is widely used in electric sightseeing vehicle industry, and the price is relatively cheap. (1) ordinary water added lead-acid battery: commonly known as "water battery", its obvious feature is that its top has a plastic sealing cover which can be unscrewed, and there is a vent on it. These filling caps are used for filling distilled water, inspecting electrolyte and discharging gas. Its main advantages are stable voltage and low price, but its disadvantages are low specific energy (i.e. the energy stored in per kilogram battery), short service life and frequent routine maintenance.

Dali four-wheel tour bus can be customized processing

Hainan kairuide New Energy Technology Co., Ltd. is a newly established enterprise of kairuide's localized service, with business scope of new energy vehicles, sightseeing vehicles, golf carts, patrol cars, sanitation vehicles, charging piles, low-speed electric vehicles (including unmanned driving technology), intelligent machines R & D, production, sales and maintenance services of equipment, automation equipment, logistics storage equipment, cleaning equipment, energy-saving equipment and accessories; operation and leasing of battery cars, electric vehicles and charging piles; tour guide service; department store sales; domestic trade, import and export of goods and technologies; new energy technology promotion services.

Therefore, it is generally believed that if an electric vehicle has a 3-speed gearbox, it is appropriate toThere will also be a significant improvement, and Tesla is said to have considered such a gearbox. However, adding a gearbox will not only increase the cost, but also bring additional efficiency loss. Even if it is a good dual clutch gearbox, the transmission efficiency can only reach more than 90%, and also increase the weight, which will not only reduce the power, but also increase the fuel consumption. So there seems to be no need to add gearboxes for extreme performance that most people don't care about.

If it is not necessary to improve the dynamic performance, the motor power can be reduced and further energy saving, driving range can be increased, and the cooling system of the motor can be simplified and the cost can be reduced. However, when the electric vehicle starts at low speed or climbs steep slope, the driver will not feel that the power is insufficient and the energy consumption is great, so pure electric vehicle needs automatic transmission. If only considering the acceleration performance of electric vehicles, one motor is enough. If there is a lower gear and better tires, the acceleration can be much higher when starting.

Dali four wheel tour bus can be customized processing

service concept: in line with the purpose of "attracting customers with products, winning customers with quality and retaining customers with service", our company has invested huge human and material resources in service, which is reflected in all aspects of product pre-sale, in-sales and after-sales. Service commitment: 1. Kairuide company will answer customers' questions with enthusiasm, politeness, seriousness and correctness. 2. Kaireid will give a reply to the user's questions within 1 hour. 3. For complaints about product quality, professionals will be sent to repair the products within 8 hours (no more than 48 hours in special areas)Product quality complaints can be handled within 8 hours according to the reasons and requirements of customer complaints; service content: 1. Pre sales service: our company has the obligation to participate in the design scheme in the early stage according to the customer's use environment and functional requirements, so that the vehicles purchased by customers can reach the excellent performance price ratio. 2. In sale service: when the products are delivered to customers, our company will send personnel to train the users on driving, maintenance and repair. 3. After sales service: our company establishes a complete set of tracking service system for users, which can track users' repair, maintenance personnel's on-site maintenance and service return visit in real time. After the products are delivered to customers, our company's after-sales service personnel regularly take the initiative to visit to remove the hidden trouble. 4. Maintenance service: during the warranty period, it provides maintenance once every 4 months for users, detects the operation of equipment for users free of charge, and guides users to use vehicles correctly and solve user's problems on the spot. 5. Maintenance service: the company sells products for life. Free maintenance and replacement of accessories within the warranty period. After the warranty period, the replacement of spare parts is free of time charge, and the cost price of spare parts is not increased.

Reasonable tire selection: the tire size should be compatible with the vehicle type. If the tire size is too large, it will reduce the propulsion force of the scenic spot sightseeing vehicle; if the tire size is too small, it will overload the tire. When driving on good asphalt and concrete roads, small tread tires should be used. For scenic sightseeing vehicles on dirt roads or other bad roads, large tread tires should be selected as appropriate. It is necessary to comprehensively consider various factors, such as the shape of tire pattern, the height of tread pattern, the degree of old and new, and road conditions, etc., to reasonably match and implement tire transposition on schedule.

Electric viewPlease don't use the battery outside the specific main purpose. If the battery is applied outside the specific main purpose, it may cause leakage, scalding and bursting of the battery liquid. 3. It is strictly forbidden to dismantle, update, destroy, obviously impact or throw the battery, otherwise, it is likely to cause leakage, scalding and cracking of the battery. 4. It is forbidden to put the battery funds into water, fire or heating. 5. Use insulating gloves and other safety precautions before working. If there are no safety precautions during the work, the risk of electric shock will occur.

1、 How to inspect the manufacturer before purchasing the electric sightseeing car: 1. Inspect its production scale, production process, strict production management, and whether the source of raw materials is regular. From these inspection results, we can comprehensively evaluate the comprehensive strength of the manufacturer. If the comprehensive strength is strong, we can consider it Purchase. The quality of the vehicle, 1, intuitive is the appearance, a good product appearance streamline, reasonable wheelbase, windshield design, handle and column can be seen directly.

Tire: in winter, the vulcanized rubber will harden, and the software of friction system will be reduced, and it will be easier to leak and tie the tire than in other seasons. To often remove the dirt in the tread, prevent the application of two times above the tire, replace the damage is very uneven tire; 8. Battery charging: battery charging must be in dry, temperature phaseFor sexual warmth (such as underground garage), natural ventilation of the natural environment battery charging, if the outdoor battery charging will cause battery charging dissatisfaction; please follow the above to remind maintenance, take good care of your electric car, karead new energy technology after-sales service will spare no effort to show you high-quality and satisfactory after-sales maintenance service.

What should we do when the sightseeing electric vehicle goes out in rainy season? It is also necessary to distinguish the different conditions of the components. For example, the control panel goes out: this probability is not very large. Generally, the operation of the sightseeing electric vehicle is placed under the cushion, which will be difficult to be drenched by precipitation. However, if the customer can see the control panel from the wheel behind the battery car, then you should find soft rubber or plastic to seal the channel to avoid The precipitation went into the damage control panel. If the control panel has the smell of burning, then it is burned, and the battery car control panel must be replaced again.

In addition to the seven major raw material price increases, the cost of electric sightseeing vehicles will immediately soar, and the operating costs of terminal equipment agents will continue to increase, for example, the rent, manpower, transportation and publicity expenses will rise. Roughly, if the price of raw materials increases, the cost of each electric two wheeled vehicle will be increased by at least 150 yuan, the cost of each electric tricycle will be increased by at least 250 yuan, and the cost of each electric four-wheel vehicle will be increased by 1000 yuan. Electric vehicles are bound to climb.

1. Pay attention to the FRP anti-corrosion or the clearance between plastic parts and the leveling of decalsAnd the glossiness of car body paint surface. 2. See the light transmittance of the car body paint. If the manufacturer can do such key points well, there is no doubt that its quality is guaranteed. 2、 The quality of plastic parts should be paid attention to when purchasing electric sightseeing vehicles. When purchasing the electric sightseeing car, you should pay attention to the quality problems of plastic parts. When checking the plastic parts, you usually do the following: rotate the power switch, turn on the seat barrel and rear trunk of the electric sightseeing car, feel the dexterity of the power switch, and check whether the power switch works or not and whether there is sound.

the natural environmental standards that will cause the electric sightseeing vehicle to corrode seriously are: (1) the salt, dust, compounds, marine climate or environmental pollution on the road will aggravate the corrosion. (2) Higher ambient humidity will accelerate the rate of corrosion. When the environmental humidity is high and the temperature soon exceeds the ice degree, the corrosion of metal materials is more serious. (3) Even if the vast majority of the body is completely dry, there is moisture in the body in a small area for a long time, which will aggravate the corrosion of the body. (4) For areas where natural ventilation is not very good and can quickly dry, higher temperature will also increase the corrosion rate of vehicle parts.

From April 1, all kinds of vehicles entering the scenic area will be controlled and controlled according to law. Since April 1, the self driving vehicles of tourists coming to Wutai Mountain must be parked in the parking lot of transfer area of the toll station in accordance with the regulations. Tourists entering the scenic area or visiting scenic spots must transfer for tourismSightseeing car. If you need to enter the scenic spot under special circumstances, you need to make an appointment one day in advance. Wutai Mountain scenic area will be determined according to the specific situation. The roads in the south, West and north of Wutai Mountain scenic area are the traffic control areas for tourists.

Wanning sightseeing van, Sightseeing car

karead teaches you to choose high-quality electric sightseeing vehicles: for the purchase of electric sightseeing vehicles, it is suggested that we should purchase famous brands as much as possible, or select some manufacturers with better after-sales maintenance service to cooperate. Even if the business scale is not large, only the quality of its service items is good, but we can still cooperate, because today's living environment is very good It seems that the production process is not easy to be worse, and compared with the new energy technology is still much lower. As the saying goes, three points of quality, seven points of service items, from this sentence, it is very obvious that the weight of the current sales market service items.

Electric sightseeing car came into being. Electric sightseeing vehicle is a kind of regional electric vehicle, which is a kind of environmental protection electric vehicle specially developed for scenic spots, parks, large amusement parks, closed communities, campuses, Garden hotels, resorts, villa areas, urban pedestrian streets, ports and other >electric tourist car</a> areas. With the increasingly strict control of vehicle fuel consumption and pollution and the acceleration of global economic integration process, the promotion of electric vehicles plays an increasingly important role.

The market demand of sports, leisure entertainment and sightseeing bus in foreign countries is constantly expanding. The market scale of sports, leisure entertainment and sightseeing bus in Europe alone is up to 50 billion US dollarsThe promotion of cars plays an increasingly important role. This requires our electric vehicle enterprises to seize the opportunity to improve the competitiveness of their products in the world market, and strive to occupy a place in the domestic and foreign markets. At the same time, we should pay close attention to the relevant laws and regulations of foreign countries and the characteristics of product demand.

electric sightseeing bus</a>

Many enterprises have participated in the vehicle leasing business this year, especially the state-owned enterprises with capital strength or vehicle products, and some private enterprises have started from the logistics vehicle leasing and other fields. The leasing mode requires high capital, and the core is financing and accounting. The greater uncertainty in the accounting part lies in the battery. If the operation life of the electric vehicle battery fails to meet the expectation, it will operate The cost will far exceed the initial financial assumptions. Timesharing is more similar to public services and is more suitable for ZF to do. But I think it is a very environmentally friendly way. Shanghai is ahead of the rest of the world and is looking forward to seeing such sightseeing bus services more quickly in the whole city.

The principles and characteristics of lead-acid batteries for sightseeing electric vehicles are as follows: 1. Charge and discharge, the positive and negative plates touch each other and penetrate into the electrolyte of lithium batteries in the utensils. Power lines and light bulbs are applied outside the utensils to connect the two kinds of electrodes with each other, as shown in figure (a). At this time, the light bulb is on, because both the lead dioxide plate and the lead plate have chemistry with hydrochloric acid in the electrolyte of lithium battery The reaction causes the induced electromotive force (working voltage) in the middle of the two kinds of electrodes, and the electric flow passes through the transmission line, that is, mechanical energyIt turns into electromagnetic energy that makes the light bulb glow. The whole process of output current due to chemical change is called battery charging and discharging.

Anshun operation sightseeing car brand, please cooperate

the roads in the south, West and north of Wutai Mountain scenic area are tourist vehicle traffic control areas. The self driving vehicles of tourists coming to the mountain must stop at the underground parking lot of the transfer area at the toll station of the mountain entrance Expressway according to the regulations. Tourists entering the scenic area or visiting the scenic spot must transfer to the electric sightseeing bus. The self purchased vehicles of all enterprises and staff in the scenic area, such as government institutions, villages, hotels and hotels, temples, colleges and universities, and operators, can enter the scenic area only after the vehicles entering the mountain pass card issued by the dispatching command and management center of the scenic area are checked by the management unit. The staff must apply for going up the mountain according to the requirements of the management method. Road traffic units in scenic spots should undertake statistical analysis and review the vehicle information content of all enterprises and staff to maintain the current total vehicle output unchanged. If additional vehicles are needed, they can only be purchased after being approved by the vehicle traffic control group of Wutaishan, otherwise, the vehicles purchased have not been issued with access cards.

The causes of battery deformation and drum shell are as follows: 1) in the electric sightseeing car, a group of batteries are deformed at the same time. First, test the voltage of the battery. If the voltage is basically normal, it means that there is no short circuit. The deformation is caused by "thermal runaway" caused by overcharge. If the charging voltage is higher than 44.7v, check the charging over-voltageIf the point current is low (below 0.3A), the charger with suitable charging parameters should be replaced.

0 notes