#Jaymac

[jaypeeindialimited]

[jminter]

FADO - The Saddest Music in the World comes back to The Firehall

FADO – The Saddest Music in the World presented by Puente Theatre & Firehall Arts Centre photo: Derek Ford FADO – The Saddest Music in the World is returning to The Firehall stage from Saturday, January 14 to Sunday, February 5, 2023. Produced by the Firehall Arts Centre and Victoria’s Puente Theatre, acclaimed Portuguese-Canadian playwright Elaine Ávila’s play, FADO, is a tale of love and ghosts set in the back alleys and brothels of old Lisbon.  Telling the story of a young woman confronting her country’s Fascist past and her own identity, the musical is interwoven with the heartbreaking national music of Portugal known as Fado, which means “fate.” The hit of the Victoria Fringe in 2018, FADO won the award for Favourite Musical, with B.C.’s own beloved Sara Marreiros playing the ghost of Amália Rodrigues, the queen of Fado. The production enjoyed a wildly successful run upon premiering at The Firehall in 2019.  In 2020, FADO won the inaugural JAYMAC Outstanding Production Award at the Greater Victoria Regional Arts Awards. The Firehall’s Artistic Producer Donna Spencer says, “It is great to be bringing this show back to our audiences as it was such a wonderful success when we last produced it in 2019. I am delighted that all of the original cast members are able to join us for this production run and to be working once again with our partners at Puente Theatre.” Directed by Mercedes Bátiz-Benét with performances by Sara Marreiros, Natércia Napoleão, Lucia Frangione, Judd Palmer, Pedro M. Siqueira, Chris Perrins, and Dan Weisenburger FADO – The Saddest Music in the World is onstage at The Firehall Arts Centre - Saturday, January 14 to Sunday, February 5, 2023. Visit firehallartscentre.ca for show information and tickets.

FADO – The Saddest Music in the World presented by Puente Theatre & Firehall Arts Centre photo: Derek Ford Read the full article

[jaymacphotography]

https://www.instagram.com/_jaymac_

[petermadana]

LA - pull up tonight. I’ll be at the Pre @bet Awards Red Carpet Meet & Greet. Shouts to the homie @superboss3232 #BET #BETAwards #Humpday #LosAngeles #California #Hollywood #PeterMadana #RedCarpet #PreBETAwards #MeetAndGreet #XenLounge #JayMac #DaManDaMythDaLegendJoseph #MusicProducer #AudioEngineer #Dj #IgMusic #InstaMusic #FollowMe (at Xen Lounge)

[ughhblog]

Andro – “Astronomical” Ft. Jaymac (Prod. By Homesix & Jaymac) Andro drops a dreamy, melodic type track called "Astronomical" featuring Jaymac with production by Homesix & Jaymac.

[jaymac815]

FRIDAY....FLANAGANS....GET THERE!! ITS GON BE A MOVIE!🎬🎥 #CampLyfe ☂️ #LOWKEYENT 🤫 #JayMac 🎶 (at Chicago, Illinois) https://www.instagram.com/camplyfe_jaymac815/p/BwFHiX-BDBw/?utm_source=ig_tumblr_share&igshid=1c38gdinbh2w9

[ladyspeechsankofa]

#RooftopPajamaJam #Denver #ItLit #Colorado #LadySpeech #BlackDenver #SlamNuba #LadySpeech #JayMac #420Friendly #303

[biltwellinc]

Poached from our friends at ChopCult A little taste of #thegoodlife captured by Jaymac / https://bit.ly/2V5Fp1s with Shanon Rusten / https://bit.ly/38GoIxA at #theboogalooinvitational.

[no-more-mr-niceguy]

.::: Jaymac — Hawgholic Japan :::.

[jaypeeindialimited]

Jaypee® Bar Bending Machine Video showing here how to operate a bar bending machine. JAYMAC® Bar Bending Machine is a semi-automatic, durable fast, and cost-effective machine, used for bending reinforcement bars and various forms of round bars. This machine effectively increases the production capacity of your steelyard, minimizing the use of manual labor. Set on a wide body with a heavy-duty gearbox, JAYMAC® Bar Bending Machines boast of a rigid design that helps maintain the performance of the machine year after year. Oil-bathed gearboxes with hardened forged alloy gears provide maximum strength, and innovative features such as push-button bending give operator comfort.

[jennytwosheds]

Someone in the work chat just called me JMc, which gave me a flashback to high school when there were Too Many Jennifers™ & my frat boy chemistry teacher decided I would be called JayMac. I did not approve, since although it was 2001 still I was not a cool skateboarding dog character with a backwards hat & an Xtreme Teen Bible t-shirt always shooting finger guns at people. But I did nothing about it, because there truly were Too Many Jennifers. And bc 18 year old me would've rather died than stand up for myself to a teacher.

[un-singe-en-hiver]

© Jaymac Photography

[jaymacphotography]

https://www.instagram.com/_jaymac_

[nicholasryder1]

About the Instant Asset Write-Off… & can it help you invest in CNC Plasma?

What is the Instant Asset Write Off Scheme… and who is eligible?

This initiative of the Australian Federal Government allows businesses to claim an immediate and full tax deduction for any purchases of assets up to a value of $150,000.

In March 2020, the government expanded this scheme and passed legislation to increase the asset value limit to $150k (previously $30k) and make this available to businesses with an annual turnover of up to $500 million (previously $50M).

When Does this Scheme Finish?

As the legislation stand now, this scheme is available until June 30, 2020. From 1st of July, it will revert back to a threshold of $1,000 (maximum asset value) and apply to small businesses only, with turnover up to $10M maximum.

What Does It Change?

With a business ‘overhead’ expense – such as fuel for example – the business can claim this immediately as a tax deductable expense.

However, in the case of assets (capitol purchases), normally these are depreciated over the life of the asset. For example a piece of equipment costing $24,000 with an expected asset life of 2 years (24 months), would be depreciated by $1,000 per month – allowing the business to claim a tax deduction of $1,000 each month.

Instead, the Instant Asset Write Off Scheme allows the business to immediately claim a tax deduction for 100% of the asset purchase. A very welcome cut to your next tax bill!

How Does it Benefit Businesses?

Being able to write off your asset purchase instantly brings forward the tax deduction… so that you can claim 100% of the purchase in your next tax return, rather than having to claim it in smaller portions over time.

Getting your tax saving now instead of later means that you get a faster return (ROI) on your asset.

What Tax Deduction Will I Get?

This, of course, depends on what tax rates apply to your business size and structure.

For this example, let’s assume that;

Your tax rate is 27.5%

You decide to purchase a CNC Plasma package valued at $25,000

You can then claim 100% of this expense within the current period, reducing your tax bill by $6,875. ($25,000 x 27.5% = a tax saving of $6,875)*

*Example only

How can I use this to help me invest in a CNC Plasma?

Virtually any Australian business that meets the criteria mentioned above should qualify for this scheme, if investing in equipment such as a CNC Plasma Cutter. (Check with your accountant to confirm your eligibility.) The team at Jaymac CNC Plasma can help ensure that your purchase qualifies.

So… How Much Does a CNC Plasma Cost?

This depends on the model of CNC unit, plasma cutter, and any additional accessories that you chose.

We’ve made it super easy to get an instant online quote. Just follow the prompts, select the options that best suit you and we’ll give you an on-screen- quote, complete with indicative finance cost as well!

INSTANT QUOTE

Alternatively, tell us what you’re looking for here and we’ll get back to you with pricing and details.

How many times can I claim?

Each separate asset must qualify under the threshold amounts, however there is no limit to how much in total you can claim under instant asset write-off.

So yes, you can claim multiple assets.

Do I have to pay cash, or can I finance?

You have to purchase the asset to qualify, however you can use equipment finance to enable the purchase of an asset.

Note that leasing is not the same as purchasing and as such won’t qualify under immediate write-off. You should check with your accountant to confirm the eligibility of your intended finance method.

[bamababygirl7]

Here are the links to the blogs on this list that haven’t been terminated yet

https://jaymac-87.tumblr.com/

https://jeffsmokesreborn.tumblr.com/

https://boredmartian.tumblr.com/

https://alpha-deucalion1-blog.tumblr.com/

https://wickedchainsaw.tumblr.com/

https://xw0r3loverx.tumblr.com/

https://masterbred004.tumblr.com/

https://daddyisamonster.tumblr.com/

https://es-trent.tumblr.com/

https://escapeisathandfortravellingman.tumblr.com/

below is a list of adults i discovered interacting w nsfw blogs run by minors. these r blogs where the minor either does not have their age displayed & heavily alludes to themselves being underage, or has directly said that they r a minor. i have screenshots of all of these ppl liking sexual posts made by said minors. pls block & report !!

@mrdaddyanthony

@forspades-hardcore2

@breezy-thug-westside

@youcantcatchmedaddy

@listentosir9542

@just-being-vishal

@rabbitknight87

@cityisagrid

@maydecembermn3

@thisisthelast16

@alpha-deucalion1-blog

@morphal2

@zero-redeeming-qualities

@mischievousmartian

@wickedchainsaw

@honeydaddy95

@xw0r3loverx

@tangentialsapphire92

@disturbedmaster420

@masterbred004

@daddyisamonster

@es-trent

@escapeisathandfortravellingman

@zapf-bat2

@mohatus-reign

@orgasmicfilth15

@johnnyinvinciblev3

@thedevilandhisvictim

@jeffsmokesreborn

@sussexy-daddy

and before anyone asks, no i will not b posting the @‘s of the minors. it’s wrong & horrible what they’re doing & i have reported all of them but i’m not ab to put them in even more danger by puttin their blogs on display. it’s fucked up nd minors should not b involved on this side of tumblr at all but at the end of the day, IT’S THE RESPONSIBILITY OF THE ADULTS TO MAKE SURE THEY R NOT INTERACTING W MINORS & TO ACTIVELY DISCOURAGE THAT KIND OF BEHAVIOR !!! there is no justification for this so pls pls not only rb + block + report but PLS be on the lookout for these kinds of blogs. thank u !!