#I2CProtocol

[adafruit]

Prototype board with the DS2484

We had a customer request for an I2C to 1-Wire converter: handy for when you don't have a spare GPIO, or maybe you can't do fast pin toggling, or maybe you have a single board computer or desktop that you want to connect to 1-Wire devices like the DS18B20. so we spun up a prototype board with the DS2484 (https://www.digikey.com/en/products/detail/analog-devices-inc-maxim-integrated/DS2484R-T/5020823) the latest version from Analog Devices. here i'm testing out my code: with multiple DS18B20's, some TO-92's (https://www.adafruit.com/product/374) and a wired sensor (https://www.adafruit.com/product/381) that i can dunk in a teacup to verify it reports the temperature right.

[fortunatelycoldengineer]

Differences between IPv4 and IPv6 . . . . for more information https://bit.ly/3IKmilD check the above link

[embedded-hash]

🌟 Student Success Stories at Embedded Hash! Practical training, expert mentors, and unbeatable placement assistance make us the ultimate destination for Embedded Systems & IoT learning. Pin your career dreams with us! 📌💻

✨Full-Day Classes

✨Internship Opportunities

✨Perfect for Students and Working Professionals

✨ Mock Interviews & Resume Prep

🎯Take the first step towards your dream career today

"🗺️ Transform your passion for tech into expertise with Embedded Systems! in our Embedded Hash Dive into real-world projects, gain practical experience, and receive 100% placement support. 🚀

#EmbeddedSystemsTraining #LearnEmbeddedSystems #EmbeddedSystemsDevelopment #CProgrammingForEmbedded #EmbeddedLinux #Debugging #IoTDevelopment 

#PythonForEmbedded  #Programming #i2cprotocol #electroebooks #arduino #arduinoproject #arduinofun  #Robotics #EmbeddedSystem #ArtificialIntelligence #Arduino #IoT #robot #robotic  #AI #EdgeAI #RTOS #FreeRTOS #EmbeddedSystems #TechCommunity #IoTDevelopment #AIIntegration #TechLearning #IoT #Linux 

[adafruit]

The famed ICN6211 DSI to RGB prototype arrives! 🔧🔬💻

OK we got our prototype PCB of a SAMD21 + ICN6211 dev board in hand, and we're starting to bring it up. first up, we'll get I2C running so we can scan for the ICN6211 chip. then its time to pore over an exfiltrated datasheet to map out all the registers to configure the two graphics ports. finally - we'll try to get this running on a mainline linux kernel with a device tree overlay. this should be super easy, right…?

[fortunatelycoldengineer]

I2C Protocol . . . . for more information https://bit.ly/3IOfELg check the above link

[fortunatelycoldengineer]

Sliding Window Protocol . . . . for more information https://bit.ly/3OQNDGN check the above link