#Captain Tukk

[boggsart]

audio seemed fitting

[highgroundanimations]

Thank you The Bad Batch & everyone involved for this wild & amazing journey full of joy, tears, awe, new friendships & beautiful artistry! You'll forever be an inspiration. 🫡 🖤❤️🖤

[trashy1turtle]

Me when Clones:

[enteroctopusdarkysilis]

✨More Clones Brickheadz !✨

Since I acquired the Small Cody (40675), I found that there was an untapped mine. Why would they only make one ? Well. I don't have an answer to that, but I decided to take matters into my own one; so behold : 11 more. I went mostly for commanders here, but then I went a bit astray and so I added some captains to the mix.

In order, row by row :

Tukk (Not cannon but the colours are so beautiful)/Vaungh (died too soon-)/Rex (obviously)/Fordo (I did Rex, so I had to)

Gree/Doom/Thorn/Neyo

Bly/Cody/Fox/Wolffe

It was a really fun project, and I hope to do more of them in the future - maybe even phase 1s, some day~); supposedly not commanders because I did most of them (except Bacara, I know...The helmet was too tough).

And because I really like challenges, if you want to see another clone turned into one of these (Be it cannon or one of your ocs) feel free to send requests in my aksbox !)

Anyway this post is already far too long for anyone's dashboard, so closeups and details will be under the cut !

Let's start with the easy ones : Cody, Doom, Fox, Thorn

Obviously, Cody was easy, I just rebuilt the original one virtually - Nothing too hard. The printed pieces here are not the right ones, because Cody's are not available on STUDio yet, but the storm trooper ones were relatively similar, so I used these for most of these models. Of course, it means I'm lacking the sun bands, and a few other distinctive elements, but it works well enough for now.

Now, Doom is essentially a colour variation (minus a few antennas). I also used an old space piece, which has this big yellow arrow printed on it. I's not exactly what Doom has, but I feel like it's close enough for a first attempt.

Then, Fox is relatively similar to Doom, but with two DC-17s. I also moved the printed torso brick up to get that red line he has.

Thorn works in a similar way to Cody too, except I removed both accessories on the side of the helmet. I also added this tile with diagonal lines to figure the wings he has. One day I'll slap some real wings on there, but I haven't found the right image yet. I also gave him a Z-6, obviously. I really like it, so I might actually make that one physically, because the way it's build (with old binocular pieces) is pretty nice; although I doubt the pieces are available in black.

Moving on to two captains : Vaughn and Tukk !

Admittedly, not really that different either, except for one thing : I learnt to do custom prints now ! Yay ! Well, these are really basic : the blue line for Vaughn, and some trapezoids for Tukk's helmet (which are, indeed, not visible here - shame, I spent so long making these fit). The Ahsoka pattern was already in STUDio (because Ahsoka already has her own brickheadz, which I'll get my hands on someday~)

I must also add that having some cyan in this whole thing added some much needed colours in here, I'm grateful some people give their clones amazing colours (If somehow someone doesn't know who Tukk is, well just check High Ground Animation. Right now. It's really cool, trust me). Anyway.

As for design changes, I modified the faces slightly by adding 1x1 tiles, to allow for different colours variations on the face. It makes them look slightly blockier, but given the overall size of the head, it doesn't do much.

I also gave Vaughn a DC-15A. It's a bit messy, but it works out well enough. Past me forgot to render it, so here is a raw, in-software picture of it (from Fordo(s hand, but it's the same design for both) :

BARC helmets ? Wolffe, Fordo, Neyo

As I've been told, these look a bit wonky, and I'll admit its wasn't exactly easy, but in my defence, it's relatively hard to get such round shapes with bricks (lego cheated by adding the visor). Anyway, given that doing that with a printed piece was out of the question, I tried to replicate the filter's shape with actual bricks, and I used a printed piece which, technically, is Lando's moustache, but downward. I'd say it does the job relatively well.

I also added a rangefinder to Wolffe, which is a little big compared to everyone else's antennas, but It's still relatively to scale with the head itself. No custom prints for him (not sure where I would find the correct pattern images ?), but I've done it for Fordo and Neyo. Fordo obviously has his well deserved Jaig eyes (and who knew it would be that difficult to find a picture of that on internet ?), and Neyo has his symbol on the helmet, chest plate, and the shoulder not shown here.

The really tinkered ones : Gree, Bly, Rex :

Here, it was a matter of trials and errors to figure out just how to get the shapes right.

I actually started with Bly, by removing the previous visor and adding the macrobinoculars first, then I tried to shape the helmet around. Truth is, it doesn't make sense technically : the two separated parts of the helmet do not connected at all, if you remove the equipment. Luckily, no one has to know that.

Next is Gree. It took me some time to figure out how to properly get a round feel, but I feel like it's as good as I can make it like this. Colour-wise, it was surprisingly difficult to find how to balance the different shades of green, and equally hard was to figure out which silvery colour would render well in STUDio. The answer lied, as it always does, in Bionicle. Of course, none of these pieces exist in this colour, but it's not really my main problem (because none of the coloured printed pieces exist either).

Finally, Rex...He gave me some trouble, I have to admit. Firstly, the part-designing software decided to have some trouble with custom prints, which was problematic, because I simply couldn't do Rex without jaig eyes (and Fordo already had his). Then, I started with Gree's base and tried to go from there to fit Rex's custom helmet. I ended up using Boba Fett's printed visor piece for Rex, because these were all triangles. I also got rid of the printed chest piece and used some black plates to simulate the pouch he has; while also adding a a few more custom printed pieces for the arms and pauldron (barely visible, but they're here. I'm not entirely happy with it, but I don't see much other solutions than more and more custom prints, which isn't my goal, so it'll stay like that for now.

Anyway, that's way too much rambling for one post, so I'll just end by saying that next week I'll post an alt version of this whole build [here !], with some 'slight' colour alterations. Definitely nothing big.

[freesia-writes]

These are killing me 🤣 can’t wait to meet Tukk!

[frostycatblr-fandom-files]

Clone Helmet Collection II

Follow the hyperlinks for specific, isolated close-ups!

ROW ONE: Captain Tukk | Commander Fox | Captain Gregor

ROW TWO: Commander Cody | Captain Keeli | Captain Fordo

ROW THREE: Glitch | Horns | Sister

ROW FOUR: Commander Colt | Commander Blitz | Commander Havoc

Art taglist: @the-hexfiles @your-slutty-gf @msmeredithrose @lonely-day3636 @dukeoftheblackstar

You can find more of my art in my masterlist!

[tobythefanboy]

finished this last night. i cant wait for more tukk content <3

@highgroundanimations

[the-writer-in-the-winter-forest]

I'm sorry, but this image from High Ground Animation from their much anticipated Tukk Tales project just screams,

Checklist: "Tukk, why did you issue an 800000 credit charge to the Republic?!?!" 💢

Tukk: "Check, I'm a material trooper." ✨️

Checklist: "I'm asking for a transfer!"

I'm so excited for this short film, I literally don't have the words. Which is saying a lot when you take into account that I'm a seasoned writer.

I'm so happy that HGA has joined the Tumblr Verse.

@highgroundanimations

[zealfruity]

Some older stuff for yall as I clean through my files. Info below.

From the original rendition of ahsoka's outfit for the Bones In The Stars Au. I still like it, I'll probably keep it as an alternative look for her (May 17th)

Echo the second he sees Fives after he made everyone think he was dead before showing up as a force sensitive bounty hunter with a lightsaber. Bones In The Stars AU

Jesse and Hardcase. Jesse's quick temper and captain obvious tendencies make him a smartass idiot no matter how capable he may be.

idk long haired clones. Kix and Nax (first two from the left) are drawn the way they look by the end of the Domino Squad Lives AU, followed by Cutup's original design from the same AU. Then, of course, Hunter and Tup, the OG long haired clones (May 9th)

The Trio Ever. just-out-of-shinyness Fives and Echo enjoy overenthusiastically following Rex around (June 10th)

TUKK MY BELOVED (Captain Tukk created by @highgroundanimations)

Older Ahsoka drawing (March 12th) back when I drew her closer to canon

[boggsart]

Here’s what I’ve been cooking up in the past month🙂‍↔️

Credits go to @highgroundanimations for creating 3 of my most favorite characters ever ( and thanks for letting me bring my vision to life 🫶🏻)

[highgroundanimations]

They fight hard and party even harder! 🥳

Happy Star Wars Day from me, Captain Tukk & Hill Company! 💙🪶

[therainjumper]

Clonetober Day 28: Phase III Clone Trooper

Captain Tukk, an OC not of my creation! (I do not have a clone OC so far)

He is the protagonist of the fan film named Tukk Tales, which I really like! He got that unique design which I find it to my liking.

He has that Phase III design, so I drew him.

[clone-trooper-cheese]

I had the sudden urge to draw Tukk, @highgroundanimations oc

My oc is the one that made the comment lol

(Edited bc I made him to pale, I was drawing with my brightness down and only noticed now, my bad guys)

[freesia-writes]

She’s not gonna join the Tumblr train but go give liz.bid.art some love on Instagram?! 😍😍😍 it’s Tukk and Howzer!

UPDATED JULY 6 — SHE IS HERE BUT DOESN’T USE TUMBLR MUCH! 😍 @kixismybestfriend

[frostycatblr-fandom-files]

Captain Tukk 🩵

Breaking in the second page of my Clone helmet doodles with one nifty red feathered teal boi!

Captain Tukk (CT-8284) of Hill Company in the 241st belongs to @highgroundanimations - the creative genius working on the fan-film "Tukk Tales".

Art taglist: @the-hexfiles

You can find the first helmet collection page here or in my masterlist.

[nevermindigotthis]

Little drawing of @highgroundanimations Captain Tukk. I used a screenshot from the trailer as a reference 😊 Keep up the good work!