#Cable Lugs and Joints | Explore Tumblr posts and blogs

thedemonscrawler · 8 months ago

Text

Call/Response

A lil' oneshot for @bloo-the-dragon of a branch of their mer AU cos we kept talking about it in Discord and then I got brainworms OwO

----

When Eclipse wakes up, Ruin isn't on the bed.

That was… unusual, but not overly alarming. Even though Eclipse's ‘just this once’ had extended by nearly two months now, with the slender mer curling up in a nest made of stolen blankets or wriggling under the sheets almost every night, there was still the occasional exception. His current favorite jacket, claimed just before laundry day and which wouldn't be surrendered until the next laundry day, is also missing, which soothes Eclipse’s mild anxiety further. Clearly Ruin had decided to move to a different sleeping spot during the night, that was all.

Eclipse stretches, feeling cables pull and worn joints scrub, before he leans over to look off the other side of the bed. No sleeping fish here, just a pillow that had gotten knocked to the floor. The door to the closet is wide open, which leaves either the couch or the tub as options.

He hopes it's the couch this time. He's getting really tired of hanging soggy sheets out to dry.

“Rue? You get overheated or something?” Eclipse listens, a faint frown pulling at his mouth when he doesn't hear anything. No scratch of scales against the tub, nor any sleepy chirps. Standing, he heads to the bathroom, poking his head inside.

The shower curtain is pulled back, revealing the tub to be as empty of mers as the bed. There aren't even any puddles on the floor to suggest Ruin might have been here earlier, only to move when it got closer to morning.

Faint unease coils in his chest, but Eclipse tamps down on it, turning towards the living room instead. Things were fine, there was no need to panic. Maybe the fish was feeling sick or something, and that was why he was hiding.

“Ruin?” His boots thud against the worn hardwood floor. From this angle he can't see the couch, nor if anyone is on it. He crosses the threshold of the bedroom–

– and stumbles as his foot comes down on a swaying deck.

Automatically his optics adjust to the change in light levels, from a darkened room to mid-morning sun, with the added bonus of glare thrown back back by cresting waves. There’s activity around him, men with heavy coats and heavier beards lugging coils of rope and net to the ship’s edge, checking that the hauling chains were in good order. Gulls call to one another in their shrill voices, the background soundtrack for most of his life.

He was… back on the ship?

Eclipse’s ventilations hitch, and he immediately turns on his heel. He shouldn’t be on the ship, he’d left it (brilliant red flames leaping into a sky filled with smoke, the distant sound of sirens) but through the door is nothing but his pitiful little closet, too small to even be called a room.

“Well there you are!” The harsh voice pulls him out of his stupor, and he looks over to see the captain glaring at him. “Come on, Sleeping Beauty, get your tools and go check out the No. 2 winch.”

“No, I…” His head feels like it’s full of fog, smothering his thoughts under a blanket of panic, but he manages to force words through the static haze. “Wasn’t I guarding the mer?”

“Hm?”

Eclipse shakes his head, fixing the captain with his best level look and trying to keep the distress out of his voice. “The– the mer that we picked up, the one that was all– all mangled. I’m supposed to be keeping an eye on h– it?”

And the captain tilts his head in that way, scorn and impatience under heavy brows, and it sparks a nervousness in Eclipse that he hasn’t felt since he was a boot just learning what his new life would be. The device at the base of his neck weighs heavily with malicious potential.

“You flush your memory after breakfast or something?” The captain snorts, gesturing towards the stern. “We offloaded it this morning! Nearly wasn’t worth the effort of keepin’ it fed on the way back– I would have made twice as much if we’d just gone ahead and skinned it for a pair of boots!”

Offloaded…?

Eclipse isn’t listening anymore. He pushes past the human and rushes to the stern of the ship, catching himself against the railing.

Just on the horizon is a grey smudge, and something in Eclipse twists with despair when he realizes how far they are from shore. Any wild ideas about jumping ship are immediately dashed; he can’t swim, and trying to grab one of the life rafts would get him shut down before he even got it inflated.

Something rises in his throat, bitterly cold and covered in sharp edges, but it’s only when the half-static sound falls from his mouth that he recognizes the feeble cheep for what it is.

A call for help, or to locate companions.

(Where are you?)

His ventilations hitch again. It feels like his chest is crumpling in, like some uncaring god has reached out and started wadding him up like aluminium foil. He can hear the men moving around the ship, low conversation and boisterous laughter and nothing connected to him. Eclipse was a toy, a machine: on the records as barely sentient, the mockery of life constructed from metal. Of no use and no importance to anyone.

Except, maybe, a mangled little mer, who had met his assigned vigil with tolerance and curiosity. Who hadn’t yelled at him, hadn’t dismissed him as a thing just because he was made of metal and there was a hole where his past should be.

Who had heard Eclipse, and called back.

Another cheep rises in his throat.

(Where are you?)

“Hey! Shut up and get back to your station!”

The railing creaks under his grip, metal fingers leaving shallow dents in the aluminium. Conditioning has his voice faltering for a second, the habit of just enough obedience to buy him another day– but the despair is stronger. The longing is stronger.

Eclipse slams his volume to max and shrieks.

(Please, answer me.)

The echoes fade, shrill sound thrown back by countless cresting waves. Land was so, so far away, but surely something would make it the vast distance, and all he had to do was listen. Past the calls of gulls circling the ship, the slap of water against the hull, the complaints of the men behind him.

Listening for the faintest hint of a response. A whisper, a breath.

Anything to let him know he’d been heard, for once.

“I said knock that crap off!”

Heavy boots against the deck, jingling buckles and the snarl of promised punishment. Eclipse turns just in time to catch the blur of metal before something impacts his face.

Everything goes dark.

—

When Eclipse wakes up, it takes his panic-addled mind several seconds to recognize his surroundings.

The soft surface under his cheek and clenched hands is a blanket, a bed, and when he sits up he can feel the gentle tug and sway of a charging cable. Shadows gradually resolve themselves into doorways and furniture, a pile of clothes on top of a shabby dresser, his boots by the door. His roaring fans are loud in the darkness of so-late-it’s-early-morning, yet he can’t seem to get them to quiet.

Something gently touches his arm.

Still on edge, Eclipse can’t help flinching away from the contact, head whipping around to stare down at the culprit. The mer stares back up at him with wide, mismatched eyes, looking nearly as alarmed as Eclipse himself.

“Eclipse…? Are you alright?”

The British accent is still jarring to hear, even now– some hysterical part of him wants to laugh, or snap at the mer in misplaced irritation. The rest of him is struggling to form words, to figure out how to dismiss this or reassure the mer or just get him to forget about it. Everything feels brittle, like the soft blankets draped over his legs will shatter if he moves, but surely he can get himself back under control.

He can’t do it. The words won’t come. Expression crumpling in misery, he stops trying to swallow back the lump in his throat and cheeps.

(Where are you?)

And Ruin blinks, ragged frills flaring out like the rays of a tattered sun, and chirps back.

(I’m here.)

The pitch is a little flat, with a layer of complexity his own chirps lack. It still hits that hollow place inside him, covering near-constant anxiety with a soft blanket of reassurance, a cool hand on a feverish forehead. The rest of his self control breaks and Eclipse buries his face in his hands, shoulders shaking with sobs that are equal parts relief and fading fear, interspersed with pitiful cheeps.

Ruin chirps back every time. A constant stream of reassurance, an unignorable reminder that there was someone here, that they hadn’t left. That he wasn’t alone.

(I’m here. You’re safe. We’re together.)

Eventually the sobbing trails off, then stops. Eclipse spares a moment to be glad that he’s not organic, otherwise his hands and face would probably be covered in tears and snot and it would just be even more embarrassing. It’s bad enough he just broke down over a stupid nightmare, of all things. Huffing through his vents, Eclipse finally drops his hands from his face, and finds that Ruin has built a nest around him.

That’s what it looks like, anyway. The blankets have been arranged so that they more or less encircle him, with Ruin’s current favorite jacket tucked in closest to his body. The mer himself forms the outermost layer of the nest: head pillowed on his arms, body curled in such a way that his crooked tail goes all the way around behind Eclipse and comes back to nearly touch his cap thing.

“Thanks…” The gratitude just slips from him, rough and scraping like gravel. He doesn’t even know if a ‘thank you’ is the appropriate response to this kind of thing.

With how Ruin’s eyes light up, the barely visible patting of his hands against the sheets, he can guess that the mer is probably fine with it. “You’re welcome! I hoped– are you feeling better?”

He can’t help the bitter laugh, looking down at the hands that sit limply in his lap. Scratched, dented, scuffed: the marks of a life spent clawing for anything he could hold on to, and having it ripped away anyway. “Yeah… I guess? I’m not– …yeah. I’m fine.”

Out of the corner of his eye he can just barely see how Ruin’s head tilts. His voice is soft, hesitant. “Did you have a bad dream?”

Well, there was no sense in hiding it, was there? Ruin could sometimes lack what Eclipse considered common sense, or made some bizarre leaps of logic– but it didn’t take a genius to figure out why Eclipse might have gone from peaceful slumber to outright sobbing.

“Just… stupid stuff. Like being back on the boat, working for that asshole again. We were already pretty far out at sea– and it’s dumb, right? That hasn’t been my life for months now, and I made sure that it wouldn’t be ever again.”

Soft tugs on the blanket, a pair of webbed hands slowly inching their way across his legs. It’s easier to watch their progress towards his own hands than it is to look Ruin in the face and see those big, gentle eyes. Eclipse takes a deep breath, trying to keep his voice flippant and steady.

“We were out at sea, and– and I guess I chickened out or something because you weren’t… there. I’d left you in that cage on shore.” The lump is back in his throat, scraping the edges off of his words so that they emerge laced in static, barely more than a whisper. “I tried to call out, but we were too far away, I think. You didn’t answer.”

“Oh. I see.” Soft, organic fingers close over his own, covering the scratched metal with cerulean blue and buttery gold. It always took him by surprise that Ruin’s hands were so warm; all of an animatronic’s warmth was centered in their chest, with the extremities left to range from ‘room temperature’ to ‘christ that’s cold!’. The tail behind him shifts as the coil of Ruin’s body gets a little smaller, the mer doing his best to scootch closer while refusing to let go of Eclipse’s hands.

“I understand. Believe me, I do understand,” he says quietly. There is a deep sorrow behind the words, scars matching the ones that cover Ruin’s body from top to tailtip. The marks of a life spent clawing for anything to hold on to. “However…”

Organic fingers tighten their grip, a reassuringly solid presence. The mer flattens himself against the bed, trying to catch Eclipse’s downcast eyes, and he offers a small smile when the animatronic finally relents.

“However, I am here. You are here.” His smile widens, showing razor sharp teeth, and he makes a musical, trilling sound that Eclipse has no hope of reproducing. It’s soothing, a sound that doesn’t pull at his programming like the chirps do, but it makes him feel better in a way that he can’t quite nail down. He’s hearing it because Ruin is here, because they’re both here.

“Yeah. Yeah, you’re right, bud.” Eclipse tries a small smile himself, though he knows it's still pretty wobbly on the edges. The tattered remains of the nightmare cling to him like cobwebs, but Ruin is still holding his hands, and it’s surprisingly easy to focus on that warmth instead.

This hasn’t been taken away from him. Ruin won’t suddenly disappear into the morning mist. Eclipse has his own home and a companion that wants to be here, and stupid nightmares can’t change that.

“Come on, we might as well get up now and start the day early.” The small grin gets wider when Ruin whines dramatically, flopping over onto his side and covering his face with his tail in protest. He knows that it’s all for show, and he reaches over to pat what he can see of Ruin’s head, his other hand unplugging the charger. “I’ll make you some waffles, how’s that?”

“...fish waffles?”

“Yeah, I’ll cut ‘em into fish shapes, too.”

#fanfic #fnaf mermaid au #fnaf security breach #tsams #the sun and moon show #I MEAN TECHNICALLY BUT #tsams eclipse #tsams ruin #aaaaa bloooo your fish got into my head

185 notes · View notes

airkewld · 1 year ago

Text

Friday June 30th, 2023 | Airkewld HQ | Stage 1 PRObuilt Beam & GEN 2 BAD Series Disc Brake Combo

A major part of the #AirkewldArmy contingent is our dealers who trust in the PRO's when it comes to building projects for their clients and it starts and ends with quality products that makes life easier, not harder.

That is why Auto Fanatik in Florida uses #PRObuilt components from Airkewld.

Alvin and his team are working on a Late-Model Karmann Ghia that needed the drive-train to be adjustable and tunable. Up to 10" of ride height adjustment and 24 different ride quality settings. That is STANDARD with a Stage 1 PRObuilt Beam (4" narrowed) with adjustable shocks from RideTech/Fox Racing. Then couple that with a set of American Made disc brakes, utilizing a 4 Piston Wilwood caliper, coated in Black powder coat. This GEN 2 BAD Brake set up uses a 5x4.50 bolt pattern and can easily be changed out to any other 5 lug configuration in a few minutes and ft lbs, due to the removable bolt patterns on the (Billet Assembled Disc) assembly.

Super trick feature is the hidden speedo cable connection under the Airkewld Star. I love it.

Every PRObuilt Beam comes with a PRObuilt Steering System that allows for an effortless and playless steering enjoyment.

Stage 1 PRObuilt Beam - https://www.airkewld.com/Stage-1-PRObuilt-Adjustable-Beam-Complete-2200-p/2200.htm - $3096.94

Labor to install Brakes - https://www.airkewld.com/Install-Brakes-onto-Ball-Joint-PRObuilt-Beam-p/9825.htm - $75.00

GEN 2 BAD Series Brakes - https://www.airkewld.com/Classic-VW-Front-Disc-Brake-Kit-4152G2-p/4152g2.htm - $1610.40

Total shipped to an R&L Terminal near you (Lower 48 States) ( https://www.airkewld.com/article-a/342.htm ) for pick up, $4700+

Save some moolah with coupon code AKArmy when checking out as well. Due to a high volume of orders, 12-14 weeks is standard turnaround for this.

I am AirkewldArmy

Coming together in a community of like minded enthusiasts who have a passion for the Classic Volkswagen and learning how to build them the right way with education, candor, and safety in mind. Together…., we are the AirkewldArmy.

9 notes · View notes

translightelectricals · 24 days ago

Text

Affordable Price Cable Lugs Suppliers & Dealers in Dubai, UAE

Cable lugs are the joints or connectors, made of two main parts flat elements and the palm. It is basically the silver metal, at the end of a cable or between electric wires, used to connect cables to electrical appliances or surfaces. Designed to be easily installed and removed for further maintenance, cable lugs provide safety to avoid shocks or damage to the connectors. We offer a wide range of cable lugs suppliers in Dubai, including copper cable lugs, aluminium cable lugs, battery cable lugs, and many more, depending on the type of installation. To learn more visit here cable lugs

TRANS LIGHT ELECTRICALS LLC

Ras Al Khor Industrial Area – Ras Al Khor Industrial Area 2 – Dubai – United Arab Emirates

+97143399627

0 notes

axisindiaelectricals · 1 month ago

Text

Enhancing Electrical Connectivity with Electrical Lugs: A Comprehensive Overview

Electrical lugs are essential components in electrical systems used for connecting cables or wires to electrical equipment, devices, or other cables. These lugs play a crucial role in ensuring secure and reliable electrical connections, enabling efficient power transmission and distribution in various applications. This article delves into the functionality, types, applications, advantages, and installation methods of electrical lugs, highlighting their significance in modern electrical systems.

Functionality of Electrical Lugs:

Electrical lugs, also known as cable lugs or wire lugs, serve as interface connectors between cables or wires and electrical equipment. These lugs are typically made of conductive materials such as copper or aluminum and are designed to provide a secure and stable connection that facilitates the flow of electrical current. Electrical lugs come in various shapes and sizes to accommodate different wire gauges and types, ensuring compatibility with a wide range of electrical applications.

Types of Electrical Lugs:

Copper Lugs: Copper lugs are widely used for their excellent conductivity and corrosion resistance, making them ideal for applications requiring high electrical performance.

Aluminum Lugs: Aluminum lugs are lightweight and cost-effective alternatives to copper lugs, suitable for applications where weight and cost considerations are important.

Mechanical Lugs: Mechanical lugs feature a screw or compression mechanism for securing wires, offering a reliable and reusable connection that can withstand mechanical stress.

Solder Lugs: Solder lugs require soldering to create a permanent connection between the lug and the wire, providing a secure and low-resistance electrical joint.

Applications of Electrical Lugs:

Power Distribution Networks: Electrical lugs are commonly used in power distribution networks to connect cables to transformers, switchgear, and distribution panels, ensuring efficient power transmission.

Renewable Energy Systems: In solar power installations and wind turbines, electrical lugs are utilized to connect solar panels, inverters, and battery banks, facilitating the flow of renewable energy.

Industrial Equipment: Electrical lugs are essential in industrial machinery and equipment, providing secure connections for motors, control systems, and electrical enclosures.

Automotive Industry: In automotive applications, electrical lugs are used to connect electrical components, batteries, and wiring harnesses, ensuring reliable performance in vehicles.

Advantages of Electrical Lugs:

Reliable Connectivity: Electrical lugs offer a secure and stable connection between cables and electrical equipment, minimizing the risk of electrical faults and interruptions in power transmission.

Versatility: With a wide range of types and sizes available, electrical lugs are versatile components that can be used in various electrical applications, providing flexibility and adaptability.

Corrosion Resistance: Copper and aluminum lugs are resistant to corrosion, ensuring long-term performance and durability in diverse environmental conditions.

Ease of Installation: Electrical lugs are designed for easy installation, reducing downtime and labor costs associated with connecting cables to electrical equipment.

Installation Methods for Electrical Lugs:

Cable Preparation: Ensure that the cables are stripped, cleaned, and prepared properly before attaching the lugs.

Crimp or Compression: Use crimping tools or compression devices to secure the lug onto the cable, ensuring a tight and reliable connection.

Insulation: Insulate the connection using heat shrink tubing or insulating tape to protect against electrical hazards and ensure safety.

Testing: After installation, conduct testing to verify the integrity of the connection and ensure proper electrical conductivity.

Significance of Electrical Lugs in Electrical Systems:

Electrical lugs play a critical role in ensuring efficient power transmission, reliable connectivity, and safe operation of electrical systems. By providing secure connections between cables and electrical equipment, these components help minimize power losses, reduce downtime, and prevent electrical faults, thereby enhancing the overall performance and reliability of electrical networks.

In conclusion, electrical lugs are indispensable components in the electrical industry, offering secure connectivity, versatility, and ease of installation in various applications. With their importance in facilitating efficient power transmission and safe operation of electrical systems, electrical lugs continue to be essential components in modern power distribution networks, industrial equipment, renewable energy systems, and automotive applications. As the demand for robust and reliable electrical connections grows, the role of electrical lugs in ensuring secure and stable connections remains paramount in maintaining the integrity and efficiency of electrical networks.

#Electrical lugs

0 notes

axisindia2023 · 5 months ago

Text

Understanding the Different Types of Electrical Lugs and Their Uses

A cable lug is essential in electrical systems, providing a secure connection between cables and device terminals. It simplifies the assembly, maintenance, and repair processes, especially when a permanent connection is required, but a direct one is inconvenient or impossible. Whether you are looking for solutions from a lightning arrester manufacturer or a cable gland manufacturer in India, choosing the proper lugs is crucial for the success and safety of your electrical installations.

Here's a look at the different types of lugs and their applications. Let’s explore!

Types of Electrical Lugs

Copper Lugs

Copper lugs are ideal for large gauge applications such as power draw or grounding. These lugs can be crimped, soldered, or welded onto cables, offering installation flexibility. They are made from high-grade electrolytic copper (ETP grade) and are available in various diameters and mounting holes, accommodating wire sizes from #8AWG to 1000MCM. Copper lugs are known for their excellent conductivity and durability, making them suitable for indoor and outdoor applications, including marine environments.

Uses: Connecting heavy gauge power cables to bus bars, relays, batteries, solar power inverters, and grounding devices. They provide efficient and reliable connections in power distribution and industrial machinery.

Aluminium Lugs

Aluminium lugs are manufactured from high-purity (99.6%) aluminum rods and are suitable for outdoor use due to their sealed palm ends. They are typically less expensive than copper lugs, making them a cost-effective solution for many wiring systems. These lugs come with jointing compounds and are sealed with end caps to prevent oxidation.

Uses: This lug is used in overhead transmission lines, substations, switchgear, and other applications where cost is a critical factor. Innovations in aluminum lugs have improved their safety and convenience, making them increasingly comparable to copper lugs.

Bimetallic Lugs

Bimetallic lugs are designed to connect aluminum conductors to copper busbars. They feature an aluminum barrel friction-welded to a copper palm, ensuring a high-quality connection. This design prevents galvanic corrosion, which can occur when different metals come into contact.

Uses: Solar plants, control panels, switchgear, and combiner boxes. Bimetallic lugs are essential in applications that transition between aluminum and copper components.

Specialized Lugs and Connectors

Crimping Lugs

Crimping lugs are used to connect cables securely by deforming the metal parts to hold each other in place. These lugs are commonly seen in automotive wire systems, electrical boxes, machinery, household appliances, and electronics. Insulated crimping lugs prevent accidental energy transfers and enhance safety.

Uses: Automotive battery connections, battery jumper cables, and various durable goods requiring secure electrical connections.

Mechanical Lugs

Mechanical lugs, or shear-off bolted connectors, use advanced technology to attach cable conductors. These lugs are suitable for underground and above-ground applications and are available in low-, medium-, and high-voltage versions.

Uses: Large-scale electrical installations in buildings, commercial facilities, and infrastructure projects. They are instrumental in applications requiring robust and reliable connections.

In a Nutshell

Electrical lugs are indispensable in ensuring secure and efficient connections in various applications. From power distribution to industrial machinery, the correct type of lug ensures reliable performance and safety. By understanding the different kinds of lugs and their specific uses, businesses can make informed decisions to optimize their electrical systems. As leading lugs manufacturers in India, we offer a comprehensive range of high-quality lugs to meet diverse needs, ensuring robust and efficient electrical connections.

Discover the perfect electrical connection solution with Axis India. Explore our wide range of high-quality lugs today.

About The Author:

Axis India stands at the forefront as a premier cable gland manufacturer in India and supplier of lightning arrestors and a wide array of Electrical Components, serving clients across 80+ countries worldwide. Whether you're seeking a quote or expert consultation, our dedicated team is ready to assist you.

0 notes

transeletric · 7 months ago

Text

Raychem Termination kits

What should we know about the Raychem Termination Kit?

Raychem offers a comprehensive splice kit for a variety of cables. The company's bonding kits are designed to withstand extreme climates and pollution, ideal for underground and overhead installation reliability. Transeletric provide quality-guaranteed products, timely delivery, and an affordable pricing policy.

About Raychem Termination Kit

Get the correct industry standard wire connector from Transeletric's wide selection of wholesale termination kits. Each terminal connection is made of 99.9% pure copper, efficiently preventing corrosion, electrical sparks and oxidation. After heating evenly, this adhesive-coated heat shrink connector releases hot melt adhesive and instantly shrinks and bonds to the wire insulation. In this way, a totally water-resistant and wear-proof environmental closure can be created. This unit can be used for terminal wiring of specialist equipment such as batteries, power distribution boxes and cables.

The feat rate of joining wires be contingent on the average of the terminal. There is no need to worry. Depending on your needs, choose wire or screw terminals from Transeletric's range of termination kits. This Termination Kit will save you time. It would support if you had a high temperature gun to blast the joints, and you're virtuous to go. In particular, spade connectors track the universal size, which makes them adaptable. Furthermore, an elegant, high-standard widening opening helps wire insertion and laid-back operation even in demanding applications. All these benefits are found in Transeletric's bulk Raychem termination kits.

Get the Raychem Termination Kit online.

The terminals are designed to fit into tight, confined spaces and can be bent after connection, eliminating the need for soldering or crimping in tight areas. Control the temperature with the heat gun. Each lug also has specification markings to help you quickly find the correct terminal and make the connection faster and easier. This electrical terminal kit can knob almost any wiring prerequisite, from simple wire acquaintances to rigorous shuddering applications. We also have a team of experienced and dedicated marketing experts, quality inspection experts and other support staff overseeing the production process. Additionally, our approach towards ethical business practices helps us stay ahead of our competitors in this industry. Furthermore, we are committed to building long-term relationships with our customers by providing quality Raychem Termination Kit per their specifications. Furthermore, during this period, our company has partnered with various domestic and international players to offer products that are authentic and value for money. To further our objectives and provide the best service in the industry, we have set up a wholly-owned branch office in Chennai. Building infrastructure closer to the customer's front door reduces response and delivery times. Browse Rechem Termination Kits at Transeletric and choose from various options today.

#electronic

1 note · View note

pioneerpowers · 2 years ago

Text

BI Metal Connector, BI Metal Lugs, Copper Lugs Suppliers in India.

Bi Metal Connector- Copper Lugs, Cable Terminal Lugs and connectors,Earthing Rod and accessories, Brass Cable Glands are our majorly manufactured products.Aluminium — Copper BI — Metallic Connector / Splice, Copper Bonded Earth Rod and Fittings, Copper Industrial Cables (A1/A2) are some of our specialities. Do visit our products page for more .

Do not hesitate to contact us for queries and products inquiries. Timings and contact details are available on the contact page.

Cable Terminal Lugs and Connectors:

We have a wide variety of copper and aluminum lugs and connectors. Starting from copper tubular cable terminal ends heavy duty- XLPE cables, Copper tubular in-line connectors, Compression joint -heavy duty, high voltage copper terminals 33 KV, Copper tubular In-lin connectors as per Australian standard, Aluminium in-line connectors, Aluminium reducer type terminal ends, Aluminium ferrules for Aluminium XLPE conductors, etc.

You can rely on a stable electrical connection quality throughout time if you utilize insulated connectors. In accordance with the standards of the current market, we provide you with a large selection of insulated and non-insulated cable lugs and connectors as well as tubular cable lugs.

Benefits For You!

Reliable

Quality Products

Best Crimped Connections

Internationally Applicable

Certified Products

Pioneer Power International are leading manufacturers of the Copper Lugs and Aluminium Lugs in the country. Started in 2001 from a just manufacturing and marketing of compression terminal ends to manufacturing a variety of copper cable lugs, aluminium lugs, Earthing and lightning protection kits or cables the company’s progress has been exponential.

The International acclimation as Copper Cable Lugs Makers, and the client base that includes Kone, BHEL, Northern Railways, BGR Energy, L&T, Siemens, and more aptly describes our standards of customer service and product quality that the company has successfully maintained.

Do visit our site https://www.pioneerpowers.com/ for any further queries or else you may contact us via filling out the form given in contact us.

#copperlugs copperlugsmanufacturers bimetalliclugs

1 note · View note

sahil299 · 2 years ago

Text

Aluminium Cable Lugs and Copper Cable Lugs

Aluminium Cable Lugs and Copper Cable Lugs are topped and loaded with oil to keep away from the oxidation of the aluminium and make a water-blocked association. Appropriate for high voltage link end. The nonattendance of the review gap forestalls dampness entrance, making these "Aluminium Cable Lugs" and "Copper Cable Lugs" additionally reasonable for open-air applications. Pass on creasing positions are set apart along the Aluminium and Copper Lugs length to guarantee sheltered and solid link pleating of the connector.

Aluminium Cable Lugs & Copper Cable Lugs Types

We as Copper cable lug makers in the area of Aluminium Cable Lugs and Copper Cable Lugs from our company emerges as a preferred choice in the market. Enhanced service life and well tested design enable this product to grow from strength to strength. We offer this product to our customers only after multiple quality checks and deliver the same with an excellent packaging. These are simple Copper Lugs which can be spliced into control lines. These Aluminium & Copper Cable Lugs are built utilizing best quality apparatus and by executing advance advances. Our item accompanies different highlights, for example, dimensional precision, reason particular development, dependability and strength. These can be benefited at advertise driving rates.

Aluminium Cable Lugs and Copper Lugs Dealers in India

We are a main maker and provider of top-notch Aluminium Cable Lugs and Copper Lugs are made of best quality metal. These Aluminium Cable Lugs and Copper Cable Lugs put in a wide exhibit of utilizations like broadcast communications, electrical works and so forth. These are very strong and consequently, are requested by all. These embellishments are accessible in parts like copper link hauls, tinned C connectors, pressure joints and some more. Our association is recorded as approved producer and exporter of a wide range of "Aluminium Cable Lugs" and "Copper Cable Lugs". We fabricate these items remembering the set rules of winning ISO models.We are one of the finest Copper Cable Lug Makers in the country.

1 note · View note

bestcompanyinpune · 2 years ago

Text

Importance of Using Tested Accessories for AB Cable Power Distribution Lines

Aerial Bundled Cable (ABC) is an innovative concept for Over Head (OH) power distribution. When compared to the conventional bare conductor OH distribution system, ABC provides higher safety and reliability, lower power losses, stability in voltage regulation and ultimate system economy by reducing installation, maintenance, and operation cost.

The construction and mechanical properties of the AB Cable system originate from the HD 626 standard. The AB Cable itself is available in several constructions including the Insulated Messenger system, the Self-Supporting System (2 core or 4 core), and the uninsulated messenger system. The commonality amongst all these systems is that the current-carrying high strength aluminum alloy phase conductors are insulated with PE or XLPE material and then twisted around the messenger cable (insulated messenger and uninsulated messenger systems) or twisted amongst themselves (self-supporting system). You can read more about the cable construction of AB Cables in our article here: Components of an LV AB Cable Distribution Line

As mentioned in our article on the ‘Lifespan of ABC Lines in Moist / Wet Environments’, the most influential factor in aging ABC cables is the use of non-standard cable connectors, accessories and clamps because they allow water ingress which slowly damages the cable.

Thus, as with any power distribution system, if the goal is to minimise downtime of the line and extend its lifetime, then the accessories that are used along with a LV AB Cable system should be tested according to the relevant testing standards. The following article goes into detail on the testing standards and their requirements for the various accessories and components used along with a LV AB Cable Power Distribution system.

Testing of AB Cable Accessories

The testing of Accessories to Low Voltage AB Cable systems can be broken down into 3 major testing buckets:

Mechanical Testing

Electrical Testing

Environmental Testing

The major products that are used as accessories to Low Voltage AB Cable systems are as follows:

Suspension Clamps:

Suspension Clamps are used along with a bracket or other supporting hardware to suspend and grip, without damaging, a LV AB Cable system. As shown in the images below, they can also be used in conjunction with insulation piercing connectors to provide service connections by tapping the mainline.

Anchoring Clamps:

Anchoring Clamps are used along with a bracket or other supporting hardware to strain the messenger or cable to terminate the line or to provide an angle of up to 90 degrees for the LV AB Cable system without damaging the cable’s insulation.

Service Clamps

Service Clamps are used along with a bracket or other supporting hardware to strain the insulated service conductor of a LV AB Cable system to provide turn angles, anchor service lines on walls, or support tap-offs for the service lines without damaging the cable’s insulation.

Insulation Piercing Connectors (IPC’s)

Insulation Piercing Connectors are used on all AB cable systems (messenger wire & supporting system) to take a tap connection. This tap can be used to continue the line, distribute the line, used in street lighting or in-service connections to households. The design allows the connection to be completely sealed against any water ingress, thus acting as a waterproof connector

Midspan Joints or Insulated Bimetallic Lugs

Pre-insulated midspan joints are used for the insulated AB cables phase or neutral to join two cables.

Pre-insulated Bimetallic lugs are used for insulated AB cables phase or neutral to terminate the cables.

Low Voltage Distribution Boxes

A distribution box is a key component of an electrical supply system. From a single, common enclosure, it helps to divide an electrical power main feed into multiple subsidiary outgoing connections that can be used to provide electrical connections to individual homes, buildings, or other requirements.

Mechanical Testing

The clamps and connectors mentioned above undergo load tests, slip tests & endurance tests to ensure that the device can withstand the load conditions of the AB Cable in real-world scenarios without slippage. The midspan joints and pre-insulated bimetallic lugs are put through their mechanical tests after the crimping of the products.

The insulation piercing connectors also have to make their connection without causing damage to the conductor. Thus, the tap and main conductor are put through a tensile strength test after the application of the IPC to ensure that cable strands have not been cut through the application of the product which would weaken the conductor.

Electrical Testing

The clamps and connectors are put through a 6 kV test to ensure that none of the components of the product become electrified during the test. The reason for this test is to ensure the safety of the power line worker or any other person who may accidentally touch the product while the line is live.

As mentioned earlier in the article, the most influential factor in aging ABC cables is the use of non-standard cable connectors, accessories, and clamps because they allow water ingress which slowly damages the cable. Since the primary function of the Insulation Piercing Connector is to pierce through the XLPE insulation covering the aluminium conductor to form an electrical connection, water ingress on an AB Cable is most likely at the location of the IPC if non-standard products are used. Axis IPC’s are tested to a 6kV underwater test to ensure a waterproof connection without any electrical leakage.

Environmental Testing

Since these products are used on outdoor overhead power distribution systems, the clamps must undergo corrosion & climatic aging to ensure that the clamps can withstand the harsh conditions that exist outdoors such as direct sunlight, rain, etc.

Distribution Boxes

Low voltage distribution boxes for AB Cable Systems are a complex product that requires testing as per many different standards including IS 14772, IS 8623, UL 746C & IEC:60695-2.

Mechanical Testing

The distribution boxes are put through several mechanical testing including impact tests, IP tests, glow wire tests and flammability tests. The purpose of the impact tests is to ensure that the product is not brittle and can endure some physical damage in the outdoor environment. IP testing ensures safety from water and dust ingress. The glow wire and flammability test are both conducted to make sure that, in case of a fire, the box is able to self-extinguish a fire and not propagate the fire.

Electrical Testing

Axis Low Voltage Distribution Boxes are also put through electrical tests where they are tested for surges from 2 kV to 4 kV. The purpose of the test is to ensure that there is no leakage current and therefore no chance of a human suffering an electrical shock in case they touch the product. This test also showcases that the box would be intact without any failure in case of an electrical surge.

Environmental Testing

As with all the other products in the system, these distribution boxes are used outdoors and are thus tested to check for the effect of UV rays on the product.

Conclusion

At Axis, we conduct an intensive system of testing for all our products as per the appropriate international testing standards during design, validation, and final production. We are confident of our products and offer them to our customers with the assurance that our products will not fail on the line. It is paramount that contractors use tested products along with their AB Cable systems. To learn more about Axis’s range of tested AB Cable Accessories, please read our catalogue here or contact us through this form.

Along with using the correct products, it is also important that the products are installed correctly. To watch how to correctly install our range of AB Cable Accessories, please watch our series of videos here.

You can read more on the factors that impact the ‘Lifespan of ABC Lines in Moist / Wet Environments’. You can also learn more about the ‘Components of an LV AB Cable Distribution Line’.

0 notes

twomindsbrokenheart · 1 year ago

Text

Monty paid no attention to the little thing, staring down at his long-ago handiwork.

It was like he’d jumped into his backstory somehow. Everything was exactly the same as it had been: the clawed chest, stained incriminatingly green (yeah, like they don’t already know it was you, he thought to himself); the gaping, horrified expression on the face; even the remnants of the bowling ball smashed around the head. Monty remembered doing that after hiding the body, as a final “fuck you,” and to make sure that Bonnie didn’t wake up and point a finger at the gator who’d done him in.

“Aww, you ain’t that badly off,” he muttered in a barely audible voice. “If you hadn’t been in the abandoned supply closet, they could’ve found you and patched you up no problem. But now it’s up to me, huh?”

Maybe he should have asked for help with this. He could have asked Vanessa — she’d messaged him, after all — or, better yet, Freddy — to come up here. But he didn’t want to get his hopes up. And…he felt like this was something that he needed to do on his own. It was a stupid feeling, but that was just how it was. It could be atonement or whatever.

Monty knelt down, eyeing the severed limbs and loose cables. All of the Pizzaplex animatronics had a few basic repair protocols built in; sometimes you or a bandmate had an arm come loose or a knee pop out of the socket in the middle of the day, and if you could quickly fix it, that would save the company time and money. But Bonnie really needed to be taken to Parts and Service if he was ever going to work properly again. Yet still, Monty reached out and began working on the things he knew, slotting joints back into place, binding some of the more essential wires together. He doesn’t need to be perfect right now. If I can get him in one piece and lug him out of here and into Parts and Service, I’ll be satisfied.

Finally, he gingerly reached down and used his claws to manipulate the delicate mechanisms in Bonnie’s chest, making the moves that would hopefully kick-start the seemingly dead rabbit.

Please, programmers. Please don’t be this cruel. Please don’t put him here just to taunt me and Freddy. I’ll do whatever you want! …well, okay, I guess I already do whatever you want, but you know what I mean! And it’s not for me, anyway. It’s for Freddy. Please, let the stupid rabbit wake up so I can take him to Freddy and we can just put this whole thing behind us forever…

twomindsbrokenheart:

80s-pizza-party:

“… Fine.” Cassie huffed, hiding the shake in her voice by brushing her hair back. And if she caught a couple tears on her palm, no one had to know.

Gregory, on the other hand, went quiet�� and Chica cleared her throat shortly after.

“I’ll, ah… go start looking now.”

Freddy stepped forward to join her…and almost at that exact moment, he heard a familiar grunting noise. Monty was definitely nearby, and drawing closer from the sound of it. But why did he sound like he was putting a massive amount of effort into moving? Had the game screwed up and not restored him back to his default form?

Well, there was a reason…

The instant that Monty got his legs (and skin) back, he swam out of the water that he was currently cruising in and clambered onto the closest dry land. Normally, his tasks in Ruin wouldn’t have bothered him that much, but something else had happened that day that shook him to the core, though he didn’t let it show: he’d gotten some memories back. There were certain things that, back in the main game, he knew he’d done, but he’d never been able to quite remember exactly what had happened. Now he did. Thanks to the magic of added backstory, the events in question were now clear as crystal, as if they’d happened yesterday.

He remembered what, and how, and most importantly, where — and he had a mission.

Monty marched through the destroyed building, sloshing through water and squeezing through vents, battering down crumbling walls with his bare hands, taking the through-ways when he saw them. He passed a group of endos going the opposite way, who buzzed and gurgled and pointed in the direction that they were going, as if to tell him where the exit was. He brushed them off impatiently. Then, closer to his destination, a whole friggin’ swarm of Mini Music Men marched around him, chattering their teeth noisily. He hopped over them as best he could, regained his footing, and finally made his way to the bowling alley.

He stood at the end of a lane, staring at the dark space where the pins went when you struck them. This was the one, all right.

He walked around the lane, in through a busted hole in the brickwork. It was a bit of a squeeze to get back there, but he’d done it once and he could do it again now. A leap over some crates, and Monty found himself in a dark storage area, containing four wet floor bots, some bowling balls on a rack…and, sprawled out across the floor, the thing he’d come here to find.

Sure enough, there he was - the object of Freddy’s affections and Monty’s jealousy. Glamrock Bonnie…

He was certainly in a bad way. He was limp, limbs severed at the joints, massive holes torn in the casing of his head and chest, eyes dark…

The wet floor bots that guarded him were dark as well… though as Monty squeezed his way inside, the one closest to him seemed to wake, staring up at him silently.

2K notes · View notes

translightelectricals · 2 months ago

Text

TRANS LIGHT ELECTRICALS LLC

Ras Al Khor Industrial Area – Ras Al Khor Industrial Area 2 – Dubai – United Arab Emirates

+97143399627

0 notes

axisindiaelectricals · 2 months ago

Text

Enhancing Electrical Connectivity with Electrical Lugs: A Comprehensive Overview

Functionality of Electrical Lugs:

Types of Electrical Lugs:

Copper Lugs: Copper lugs are widely used for their excellent conductivity and corrosion resistance, making them ideal for applications requiring high electrical performance.

Aluminum Lugs: Aluminum lugs are lightweight and cost-effective alternatives to copper lugs, suitable for applications where weight and cost considerations are important.

Mechanical Lugs: Mechanical lugs feature a screw or compression mechanism for securing wires, offering a reliable and reusable connection that can withstand mechanical stress.

Solder Lugs: Solder lugs require soldering to create a permanent connection between the lug and the wire, providing a secure and low-resistance electrical joint.

Applications of Electrical Lugs:

Industrial Equipment: Electrical lugs are essential in industrial machinery and equipment, providing secure connections for motors, control systems, and electrical enclosures.

Automotive Industry: In automotive applications, electrical lugs are used to connect electrical components, batteries, and wiring harnesses, ensuring reliable performance in vehicles.

Advantages of Electrical Lugs:

Reliable Connectivity: Electrical lugs offer a secure and stable connection between cables and electrical equipment, minimizing the risk of electrical faults and interruptions in power transmission.

Versatility: With a wide range of types and sizes available, electrical lugs are versatile components that can be used in various electrical applications, providing flexibility and adaptability.

Corrosion Resistance: Copper and aluminum lugs are resistant to corrosion, ensuring long-term performance and durability in diverse environmental conditions.

Ease of Installation: Electrical lugs are designed for easy installation, reducing downtime and labor costs associated with connecting cables to electrical equipment.

Installation Methods for Electrical Lugs:

Cable Preparation: Ensure that the cables are stripped, cleaned, and prepared properly before attaching the lugs.

Crimp or Compression: Use crimping tools or compression devices to secure the lug onto the cable, ensuring a tight and reliable connection.

Insulation: Insulate the connection using heat shrink tubing or insulating tape to protect against electrical hazards and ensure safety.

Testing: After installation, conduct testing to verify the integrity of the connection and ensure proper electrical conductivity.

Significance of Electrical Lugs in Electrical Systems:

#Electrical lugs

0 notes

axisindia2023 · 2 years ago

Text

Cable lugs & their types: Which one is the right one?

Cable lugs are an essential component of any electrical system, used to connect cables to electrical equipment and other wires. They come in various types, each designed for specific applications and requirements. Copper cable lugs are one of the most common in electrical systems.

In this blog post, we'll take a closer look at cable lugs and their styles and help you choose the right one for your application.

What are Cable Lugs?

Cable lugs are metal connectors attached to the ends of cables to connect them to other wires or electrical equipment, typically made of copper, aluminum, or brass, which are good conductors of electricity and can handle high current levels.

Copper cable lugs are an ideal choice for electrical connections.

Types of Cable Lugs

1) Copper Lugs: Copper lugs are ideal in large gauge applications for power draw or grounding. The wire can be soldered or crimped to each copper lug. One end of the copper lug takes the cable by soldering, welding, or crimping, depending on the type of lug used. The other end of the copper lug is secured to a matching termination or connection point by a bolt, screw, or spring clip.

2) Aluminium Lugs: Aluminium lugs are manufactured from the solid aluminium rod using high conductivity (99.6% pure) aluminium. The lugs are forged from solid material and are suitable for outdoor use (as the palm ends are sealed). The Aluminium Lugs are supplied with jointing compounds in the barrels and sealed with an end cap. We have a list of standard sizes but can manufacture according to the requirement. Crimping takes place with hex dies and usual aluminium cable preparation.

3) Bimetallic Lugs: Axis bimetallic lugs made of Friction welding establish the highest quality connection between the copper palm and the Aluminum barrel.

Bimetallic Lugs are used in Solar Plants to connect aluminium conductors to copper busbars in a range of electrical applications such as control panels, switchgear, and combiner boxes.

Choosing the Right Cable Lug

Choosing the right cable lug depends on several factors, such as the cable size and type, the electrical equipment connected, and the environmental conditions of the application.

Here are a few key considerations to keep in mind when selecting the appropriate cable lug for your application:

Cable size and type: Make sure to choose a cable lug designed to fit the size and type of used cable. Using the correct cable lug size or kind can result in a good connection preventing electrical hazards.

Voltage and current rating: Choose a cable lug that is rated to handle the voltage and current of your electrical system. Using a cable lug with a lower rating can result in overheating and damage to the equipment, while using a cable lug with a higher rating may be unnecessary and increase the cost.

Material: The material of the cable lug should be selected based on the environmental conditions of the application. For example, if the application is corrosive, a copper cable lug may be the preferred choice.

Installation method: Consider the installation method of the cable lug, as this can impact the ease and reliability of the connection. Crimped cable lugs are generally quicker and easier to install than soldered ones but may be less reliable in specific applications.

Standards compliance: Ensure that the cable lug you choose complies with applicable industry standards. Axis Lugs are UL & cUl approved and have corrosion-resistant tin plating.

Conclusion

Cable lugs are essential to any electrical system, and choosing the right one for your application is crucial to ensuring a reliable and safe connection.

0 notes