#Autel IM508S

[eobdtooluk-blog]

How to Read Password and Learn Key wiht Autel IM508S for 2019 Hyundai Tuscon AKL?

Autel IM508S is a new generation key programming tool that can perform advanced key programming, key generation, backup/repair of anti-theft data and more. Here we carry out all the lost key commands for 2019 Hyundai Tuscon.

Today we are working on a 2019 Hyundai Tuscon using the Autel MaxiIM IM508S key programming tool. There are two steps in total: reading the password and learning the key. Please follow the article to learn about the entire process.

Before doing all the key lost functions, we need to read the password and learn the key before we can create a new key.

Step 1: How to read the password?

The Autel IM508S key programming tool communicates with the vehicle through the OBD2 main cable.

Turn on the car's ignition switch and start the car.

Enter the IMMO function of the scanner IM508S >> Select the Hyundai car brand >> Click Auto Select >> Confirm the vehicle identification number.

Click USA >> Yes >> Smart key >> Hot function >> Read immobilizer password >> Read pin code(8A smart card)

This function only supports 8A chip smart card models.

Press Yes".

Turn on the hazard warning lights.

Turn off ignition switch

Open and then close the driver's door once.

Autel IM508S starts reading the password.

(This process takes a long time, please wait...)

Step 2: How to learn the smart key?

Click Smart Key Learning (Guide)>>Start

This feature supports adding keys and losing all keys.

Performing this function will clear all existing keys and all old keys must be relearned for proper use.

Press "Yes" to continue.

Turn off the ignition switch (note: the instrument screen is black).

Open and then close the driver's door once!

Please enter the 6-digit security password obtained in the previous step.

notes! Click OK to complete the following steps:

Within 5 seconds after pressing the OK button, use the back or top of the smart key to press and hold the START button for 5 seconds until the anti-theft light flashes.

(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully programmed)

Programming successful.

Press "Yes" to program the next one and "No" to finish.

Please exit the system to the vehicle selection menu and check whether the key is programmed successfully.

Check out the new keys, everything is cool.

[obd2gatecom]

How to Choose Between IM508S and IM508?

For the comparison table, please visit:

IM508s and IM508, What'S the Difference? - OBD2gate Official Blog

Some customers were curious about the differences between Autel IM508S and IM508 and which one would be a better fit…

blog.obd2gate.com

From the comparison, we can see that Autel IM508S offers significant advancements in processor, system, and RAM performance compared to IM508. Unlike IM508, it supports DoIP protocols without requiring an additional converter. The primary difference between the two lies in the upgraded hardware configuration.

Compared by product features and price

The Autel IM508S, an advanced version of the Autel IM508, offers additional capabilities such as advanced diagnostics for ABS, SRS, and BCM modules, coding functions, and advanced key programming features like EEPROM chip reading and writing. It is a more versatile tool but comes at a higher price. On the other hand, Autel IM508 is a comprehensive key programming tool that supports various vehicle makes and models. It features functions like remote key programming, immobilizer system diagnosis, and maintenance services. Both tools are suitable for professionals, with the IM508 being more budget-friendly.

In summary, Autel IM508S offers superior performance, DoIP protocol support, and advanced features compared to the budget-friendly IM508.

[obd2gate-com]

How to Choose Between IM508S and IM508?

Some customers wondered, “What are the differences between Autel IM508S and IM508? Which one is suitable for me?” Here comes the comparison.

For the comparison table, please visit:

From the comparison, we can see that Autel IM508S offers significant advancements in processor, system, and RAM performance compared to IM508. Unlike IM508, it supports DoIP protocols without requiring an additional converter. The primary difference between the two lies in the upgraded hardware configuration.

Compared by product features and price

The Autel IM508S, an advanced version of the Autel IM508, offers additional capabilities such as advanced diagnostics for ABS, SRS, and BCM modules, coding functions, and advanced key programming features like EEPROM chip reading and writing. It is a more versatile tool but comes at a higher price. On the other hand, Autel IM508 is a comprehensive key programming tool that supports various vehicle makes and models. It features functions like remote key programming, immobilizer system diagnosis, and maintenance services. Both tools are suitable for professionals, with the IM508 being more budget-friendly.

In summary, Autel IM508S offers superior performance, DoIP protocol support, and advanced features compared to the budget-friendly IM508.

[autelscanner]

Autel Key Fob Programmer - Full System Diagnostics With Advanced Service Functions

If you’re in the auto locksmith business or just want to get your hands on a key programmer, there are many options available. One of the best choices is the Autel IM508, which combines full system diagnostics with advanced service functions.

The tool offers a variety of IMMO functions including Read Pin/CS (all keys lost), BMWCar CAS3/2 Key Learning, BenzCar FEM/BDC Key Learning/ECU Adaptation, and Remote Learning.

IMMO ECU Programming

IMMO ECU programming is a complex process which requires special tools and professional experience. Using the autel key fob programmer can make this process much easier and faster.

This application can access key chip, read, retrieve and write key information, support read PIN/CS (all key lost), key generation, key learning, remote learning, IMMO ECU Reset/Adaptation, IMMO ECU Refresh/Coding, Backup/Restore IMMO Data.

MaxiIM IM608 Pro is the most powerful all-in-one tool that combines advanced key programming and all systems diagnostics in one Android based 10.1-inch touchscreen tablet. It is equipped with XP400 key programmer and MaxiFlash ECU programmer to provide complete coverage of IMMO functions.

EEPROM/MCU Read/Write

EEPROM (Electrically Erasable Programmable Read-Only Memory) is non-volatile memory that can be reprogrammed electrically. It's most commonly used in microcontrollers that need to store small amounts of data and retrieve it later.

Unlike RAM, EEPROM is not erased by powering off the chip. This makes it a good choice for devices that need to remember data after a reset or power down condition, such as a password-protected money locker.

Unlike flash memory, EEPROM is programmed and erased in blocks of one byte at a time. This allows it to be very fast, but at the cost of a limited number of write cycles. Despite these drawbacks, EEPROM is still widely used in electronics and is found in many popular applications.

IMMO ECU Adaptation

Autel IMMO ECU Adaptation is a powerful feature of the Autel IMMOkey fob programmer that allows you to program new keys for your vehicle. The IMMO ECU Adaptation process is designed to make the new key compatible with your car’s immobilizer system.

MaxiIM IM608Pro includes all-in-one key programming, diagnostics, service and anti-theft functions. It also provides OE level diagnostics for more than 80 US, European and Asian vehicle makes and models.

XP200 key programmer can read and write EEPROM/MCU data to help prevent your vehicle from being stolen. Smart Mode and Expert Mode provide helpful guide systems that can simplify the process.

This high-end IMMO and key programming tool bundle (updated from IM508/IM608) integrates the XP400 Pro and MaxiFlash JVCI ECU programmer to give you top-level IMMO and key fob programming capabilities along with 22+ most useful service functions. Autel maxisys is great too.

IMMO ECU Reset/Fit

IMMO ECU Reset/Fit is a service function that allows a technician to reset the vehicle’s transponder ECU and restore key chip data, or to fit new keys to the ignition switch. This is useful for vehicles where a key has been lost or stolen, and it can be performed with a key fob programmer.

MaxiIM IM508 (with XP200) is an affordable and easy-to-use key programmer that can perform all types of IMMO functions. Among the many special functions offered, this unit can read PIN/CS (all keys lost), EEPROM/MCU read & write, and IC card read/write.

It also comes with a range of regular maintenance services such as Oil Reset, SAS Calibration, TPMS Sensors ID Relearn, and BMS. These are very important and helpful maintenance services that can help you keep your vehicle safe and running efficiently.

IMMO Key Learning

IMMO Key Learning is the ability to learn new keys from a vehicle's smart key. This function is available on many Autel products and can be used by amateurs or professionals.

Using this function you can add new smart keys to lost keys in VW/Audi/Skoda/Seat IMMO III/IV/V, Benz FEM/BDC, BMW CAS4/3/2 key and even Volkswagen & Audi MQB (VDD & JCI).

This feature is useful for any automotive locksmith or shop that needs to do IMMO programming on vehicles. This can help reduce costs and improve efficiency. This is especially important for auto locksmiths that often need to do a large amount of work. IMMO Key Learning is easy and fast to use. 

[x431euinfo]

How Autel APB131 Adapter Read mk7 golf 3426 MQB Cluster?

Autel released their MQB-RH850 cluster solution, that is Autel APB131 Adapter.

Here we will try it on a mk7 golf 3426 MQB cluster with IM508S and XP400PRO.

In IM508S,

We enter VW Expert Selection menu.

Select

MQB instrument cluster>>RH850 locked (via dump)>>D70F3426

Select "Read Flash Data via Programmer".

Connect APB131 Adapter according to diagrams, no components to be removed like in Xhorse Key Tool Plus.

Read cluster data.

Desolder and read EEPROM via "Read EEPROM(95128) data via programmer".

Select "Calculate IMMO Data".

Load EEPROM and cluster data.

Decode IMMO data.

Then we just continue "Make Dealer Key" and "Key learning" in vehicle to finish programming.

Done! That's how to use APB131 Adapter.

[cardiagnostics]

How to Solve Autel Honda Odyssey "Immo system not normal"?

Question:

Had a 2012 Honda Odyssey, the car starts but shuts off. And the green light is flashing. Then saw at the top of the aftermarket key there was a whole like something fell out. Took the key to my locksmith and he gave me a new uncut key that has a transponder and said I could try holding the 2 keys together and program the new transponder just so I could drive it to his shop where he would then just cut the new key.

When I hooked up my Autel MS906BT and went to the function to program the key it says this. I’m not sure what to do now, and how to have his guy come out and program it

Here is the Possible Solution:

Try to remember what the Honda there is the HO-01, 03, and a 05

1)The first thing is to make sure that the key has the correct type of transponder.

2)then you can take the uncut key and cut it. Make sure it works to turn the cylinder.

3)Now you have a physically working key and the correct transponder so you should be able to do a "all keys lost" and program a new key.

HO03 is the 46 chip that is needed.

Make sure there are no codes stored for the immobilizer also as that could interfere.

If you have the XP400 Pro, you can scan the key to make sure it's a 46 chip as my IM508 is confirming that after 2009 it should be the 46 chip .

Do a system scan and see if it shows any red immobilizer issues.

If you see anything in red, you'll have to find that "quick erase DTC "and clear it first

With the XP400 you can confirm the type of chip. I don't know what you have. And sorry for all the run-on messages.

Just as a side note, if you turn the ignition on with a key that had no chip, that is why your programmer might be saying that the "immobilizer is not normal ". You might just have to do the quick clear to clean out any codes like an key with no chip. You can try and use the physically working key to turn on the ignition, while trying to program the uncut key by holding the transponder head of the key up to the ignition cylinder. If it lets you program it that way then you have programmed the uncut key, and once the car is started, you can drive it and drop the uncut programmed transponder key into the cup holder until you get to a locksmith to cut it for you. However, Honda Key can be tricky so I would advise trying to get the key cut first to make sure it works in the cylinder. Just my side note because even when I try to pick and decode Honda Keys  they are notorious for wearing down.

Feedback:

Had my locksmith cut the key and as soon as I put the unprogrammed key in the ignition and hooked up the scanner, the system check message was no longer there. I erased all keys and was able to easily program the new key.

Done!

[jonsonsmith]

autel ms908s pro

[clearjellyfisharbiter]

2023 Autel MaxiIM IM508S IMMO Key Fob Programming Tool Car Key Programmer Car Scanner Remote Control Learning Read&Write All System Diagnostic 28+ Service Functions Active Test Upgrade of IM508/KM100 https://a.co/d/78GU5OK

[autelobd12]

Autel diagnostic tool scanner, Autel maxisys ultra, Autel km100, im608 pro, im508 pro – Autelobd

Autelobd is one of the official distributor of the Autel.To provide the best service to our customers, Autelobd strive to understand each end-users' needs, and translate those needs into superior products.Our goal is to provide customers with the highest quality products, the most competitive prices and the best after-sales service. autel im608 pro

[eobdtooluk-blog]

How to Virginize Mercedes CR3.23 ECU with Autel IM608/IM508?

Customer problem:

I can’t virginize cr3.23 mercedes ecu. Can you help me do this with Autel IM608?

Eobdtool.co.uk engineer gives the suggestion below.w.

Please refer to the Mercedes W212 Delphi ECU CRD3.10 ECU to read and get the special key number from ECU with IM508.

Though the Bosch ECU type is different, the operation steps are the same by I508 and IM608 series (IM508S/IM608II).

Go to Control Unit>> Engine (ECU)

The wiring diagram of CRD2.xx and CRD.11 is a little different.

We follow the crd2.xx wiring diagram to connect Autel key programmer and Mercedes ECU

When we read engine ECU info, it prompts that “The testing device cannot communicate with ECU!”

So we choose CRD.11 wiring diagram to try

Be sure there's 12v to 13v, and don't forget 120ohm resistance between CANBUS

The cable marked is not required.

It can read the engine ECU data successfully.

Remember to save the engine data info as well.

Customer’s feedback:

Thanks! Now I can virginize the ECU.

[obd2gatecom]

IM508S Generate Universal Key Tutorial

In this guide, locksmiths can find detailed instructions on generating a universal key using Autel IM508S and XP200 key programmer.

Car key used: 2018 BMW 8 series 314.00 MHz

Follow these steps:

Connect Autel IM508S and XP200 using a USB cable.

Power on IM508S by pressing the start button.

Ensure normal device communication by checking if Autel XP200 indicator turns green.

On the main menu, select “Universal key.”

Accept the disclaimer and navigate through the options:

Universal Key Generation — Europe — BMW — Type by Model —

Place one Autel ikey for BMW into Autel XP200.

Choose “Generate Universal Key.”

Wait for the key generation process to complete quickly and accurately.

Generate a universal key effortlessly with Autel IM508S.

[obd2gate-com]

IM508S Generate Universal Key Tutorial

In this guide, locksmiths can find detailed instructions on generating a universal key using Autel IM508S and XP200 key programmer.

Car key used: 2018 BMW 8 series 314.00 MHz

Follow these steps:

Connect Autel IM508S and XP200 using a USB cable.

Power on IM508S by pressing the start button.

Ensure normal device communication by checking if Autel XP200 indicator turns green.

On the main menu, select “Universal key.”

Accept the disclaimer and navigate through the options:

Universal Key Generation — Europe — BMW — Type by Model — 8 Series — 2018 — BMW 8 series 2017–2020 (314.00 MHz FSK, ID49).

Place one Autel ikey for BMW into Autel XP200.

Choose “Generate Universal Key.”

Wait for the key generation process to complete quickly and accurately.

Generate a universal key effortlessly with Autel IM508S.

[weeklytools]

Is Autel MaxiCOM MK808 the Best OBD2 Scanner? Honest Review and Demo!

[autelscanner]

How to Turn the Key Fob to the ON Position With a Key Fob Programmer

A key fob programmer is a device that is used to reprogram the locking and unlocking functions of your car's key. If you have lost your keys and don't have the code to your vehicle, you can buy one to reprogram your keys so you can use them again. You can also replace your car's anti-theft chip or battery and then reprogram it so that your vehicle will no longer be stolen.

Replace the batteries before reprogramming

If you have a key fob and it isn't working, it may be time to replace the batteries. This is a very inexpensive way to fix your remote. However, you will also need to know how to reprogram your key fob to ensure it's working correctly.

Depending on the make and model of your vehicle, there are a few different ways to program your key fob. Some are designed to work with maximum security, while others are cheaper and easier to use.

You can purchase a new key fob online or at your local hardware store. You can also buy small watch batteries at most pharmacies. These will cost around a couple of dollars.

When you purchase a new key fob, you will need to match the model number with your existing vehicle. Most cars have a number on the rear of the remote. Using your user manual will help you find this information.

Replace the anti-theft chip

There are a lot of things to choose from when it comes to replace the anti-theft chip on your key fob. You can get your hands on the latest and greatest of the high tech variety or you can settle for a tried and true metal cylinder. But how do you know which one to choose? One way to do this is to hire a professional locksmith. Then you can go about your business and enjoy the peace of mind knowing that your car is still a lock.

While you are at it, you may want to consider a replacement battery. You can find these at your local home improvement store for a reasonable price. To keep your keys safe and secure, you may want to purchase a second key fob that you can switch out whenever you need a boost.

Turn the key fob to the ON position

If you own a car, you may wonder how to turn the key fob to the ON position with a key fob programmer. This is an easy process, but you need to follow the proper steps.

First, you need to get inside your vehicle. You will need to sit in the driver's seat, and turn your ignition on. Make sure that you have a working key. Once your vehicle is in the running position, you should press the lock button on the side of the door. Afterward, you should turn the car off.

Next, you should remove the battery from your key fob. You can do this by using a screwdriver. After you are done, you can reassemble the key.

Reprogram the unlocking and locking function

If your key fob has stopped working or is not working correctly, it may be a good idea to reprogram the unlocking and locking functions on your key. This can be done with the help of a locksmith or mechanic. However, this process is not a quick fix. You will need to consult your car's owner's manual to determine how to program your key.

Before you attempt to reprogram the unlocking and locking functions of your key, you should test it first. Test the locking function by pressing the lock button on your key fob and seeing if it works. If it does not, try the unlocking function and see if it works.

Once you have determined that the lock and unlock functions of your key are not working, you should consider changing the battery. The batteries for most key fobs are cheap and easy to replace. Changing the batteries is also an easy way to prevent power loss.

Reprogramme a replacement key fob

An autel scanner key fob programmer is a device that helps you to reprogram your key fob. Programming your key fob is an easy way to keep your car safe and secure. In some cases, it may be needed to fix a faulty key.

You can buy a key fob programming tool from a local auto repair shop or locksmith. However, you can also do it yourself. This is usually the cheapest option. If you decide to do it yourself, you will need a working key and a working battery.

To start, you need to make sure that your key fob is in the "On" position. The key must be turned to this position to power the vehicle's electrical system. Leaving the key in the 'Off' position can interfere with the programming process.c