#Aircon Service Ingelburn

[omegaair]

How Professionals Carry Out Ducted Air Conditioning Maintenance?

Ducted air conditioning is not cheap and after you spend thousands of dollars in your ducted aircon installation in Prestons, you must understand what it takes to perform ducted air conditioning maintenance. Performing a wrong step can cause severe issues down the track and can leave you sweating during the summer. So, you need to pay strong attention to it. With poor aircon maintenance, the appliance will face loads of possible side effects that might require costly repairs. So, make sure to hire a reputed air conditioning service company to inspect and clean your ducted air conditioning system. Go through the article to know the expert ways that professionals use to ensure your air conditioner runs efficiently for years to come. 

Cleaning and replacing filters 

Even though cleaning and replacing filters is one vital maintenance step that we all know, most people overlook or forget it until a lack of performance is noticed. This can lead to further issues down the line. To keep your ducted aircon system working efficiently, you must clean the filters at least once every six months. The professionals always recommend inspecting the filters at regular intervals and washing them using soapy, warm water, if necessary. They know that regular filter cleaning will allow your air conditioning unit to run as efficiently as possible.  

Ensures your appliance never run without a filter 

This is very important, especially if you have someone in your home with respiratory or immunity illnesses such as asthma. After the build-up of allergens due to the dirty filters, dust and dirt can stay in your aircon system for months. So, each time you are turning on your air conditioner, the allergens are getting released onto the air to kickstart an asthma attack. Cleaning and replacing filters are useful to prevent debris and dust from damaging the internal components of your air conditioner. So, the professionals providing aircon service in Ingleburn makes sure your ducted air conditioner never runs without a filter. 

Cleaning coils at regular intervals 

Both the evaporator and aircon coils are some of the outdoor elements of your ducted aircon unit. Similarly, they are also going to collect dirt and dust over time. So, make sure to clean them to get rid of the dirt that has been accrued. The professionals recommend cleaning the coils every six months, however, it might vary depending on the surroundings, condition and location. 

Fixing the necessary repairs 

You might be thinking that your ducted air conditioning system is working as it should. But, over time, the efficiency of your system gradually decreases. To ensure optimal performance all the time, you must maintain and service it regularly. If there are any necessary repairs, the professionals recommend getting them fixed immediately as prolonging them is going to cause further damage to your appliance as well as to your bank account. 

Hope, you have understood how professionals carry out ducted air conditioning maintenance. If you find the content of this article, don’t forget to share it with your friends, and get back to us for more exciting content! 

[omegaair]

Steps of Split System Aircon installation

"If you want to install a split air conditioner you may not need the help of an installation expert. Instead you can lay your hands on the job."

Are you planning to get an AC installed at your place but don’t have the budget to pay for an AC installation job? Here are simple guidelines for installing a split air conditioning system. A lot of people prefer split air conditioners over window air conditioners chiefly because the former consume less energy. If you want to enjoy the comfort rendered by an air conditioner and at the same time want to show your interest in saving on utility bills, it’s definitely a good idea to choose a split AC which is relatively easier to install. Follow the guidelines below for successful installation of a split AC.

Selecting the installation area

If you are choosing to invest in a split air conditioning system it is important that you pick an ideal space with stronger foundation, mainly a room which has thicker walls to support the indoor and outdoor units. A major reason for choosing a stronger wall is to ensure that it doesn’t unnecessarily undergo vibrations.

Fix up mounting plate of the indoor unit and drill an outlet hole

When considering Split System Aircon Installation in Ingleburn it is vital that you first attach the mounting plate to the wall where you want to install the indoor unit. While doing this maintain a horizontal alignment and then mark the space using a pencil. Now draw the drilling holes for fasteners and also mark the space for inserting plastic anchors. After you mount the plate drill out a hole through which the duct work and the wires from the inlet machine will connect to the outdoor unit.

Mount the indoor unit

First, mount the system by removing the front cover of the indoor unit. Lift it to where the mounting plate is fixed. Now send out the copper pipes through the outlet hole which is drilled on the wall. Also, send out the drainage pipes with the copper ducts and make sure that the latter is smoothly bent to allow proper cooling.

Choosing an installation area for the outdoor unit

In order to achieve optimum performance make sure you chalk out a distance of at least around 30-35 cm between the indoor and outdoor units. As you fix a space for installing the outdoor unit ensure that the area doesn’t get exposed to direct rays of the sun and should not get dusty either.

Fixing brackets

After selecting the installation area for the outdoor unit, fasten up the brackets which will support the unit.

Mount the outdoor unit

Although this may seem tough to you and you may feel the need to call up Aircon Service in Blacktown, but the process is not as complicated as you believe it to be. Just lift it up and simply place the outdoor unit on the brackets. Bolt it up with the bracket.

Connect the wires

The system comprises electrical ports. Follow the connection diagram and accordingly join the power cables with the outdoor machine.

Fix the copper pipes

Clean up the copper pipes before connecting them. Connect copper pipes with corresponding ports using flare nuts. Now open up gas valves and you are done fixing the split AC.

If you think the process is much complicated, you can hire professionals for the job.