#ASTM A105 CARBON STEEL FLANGES MANUFACTURER IN MUMBAI

[metalloyinternational]

ASTM A105 Carbon Steel Flanges

ASTM A105 is a standard specification for carbon steel forgings used in piping applications. This specification covers forged carbon steel piping components for ambient- and higher-temperature service in pressure systems. Among the components included are flanges, which are crucial in connecting pipes, valves, pumps, and other equipment to form a piping system. ASTM A105 carbon steel flanges are known for their durability, strength, and cost-effectiveness, making them a popular choice in various industries.

Properties and Specifications

ASTM A105 carbon steel flanges are designed to handle high-pressure and high-temperature applications. They are typically manufactured using open die, closed die, and ring rolling methods. Here are some key properties and specifications:

Material Composition:  ASTM A105 carbon steel consists of a mix of iron, carbon (up to 0.35%), manganese (0.60-1.05%), phosphorus (up to 0.035%), sulfur (up to 0.040%), and silicon (0.10-0.35%).

Mechanical Properties:  The steel must have a minimum tensile strength of 70,000 psi (485 MPa) and a minimum yield strength of 36,000 psi (250 MPa). It also has good ductility and toughness.

Heat Treatment:  These flanges can be supplied in a normalized, normalized and tempered, or quenched and tempered condition depending on the required mechanical properties.

Applications ASTM A105 carbon steel :

ASTM A105 carbon steel flanges material are widely used in various industries due to their versatility and reliability. Some common applications include:

Oil and Gas Industry: 

For connecting pipes and equipment in drilling operations, refineries, and pipelines.

Petrochemical Industry:

Used in chemical processing plants where durability under high temperatures and pressures is essential. 

Power Plants:  

Essential in systems that transport steam and water at high temperatures and pressures.

Construction: 

In building infrastructure, particularly in plumbing and HVAC systems.

Types of ASTM A105 Carbon Steel Flanges:

There are several types of flanges manufactured under the ASTM A105n specification, each serving different purposes and fitting various design requirements:

Weld Neck Flanges:  These flanges are designed to be welded to the piping system. They have a long neck that provides reinforcement in high-pressure applications.

Slip-On Flanges: These are slipped over the pipe and welded both inside and outside to provide sufficient strength and prevent leakage. They are easier to align and are preferred in low-pressure applications.

Blind Flanges: Used to close the end of a piping system, effectively sealing off a section of pipe.

Socket Weld Flanges: Similar to slip-on flanges, but the pipe is inserted into a socket and then fillet welded. These are used for small-sized high-pressure pipes.

Lap Joint Flanges: These are used in conjunction with a stub end, allowing for easy alignment and assembly of the piping system.

Threaded Flanges: These flanges are screwed onto pipes with external threads, making them ideal for low-pressure and non-critical applications where welding is not feasible.

Benefits astm a105 flange

Strength and Durability:  ASTM A105 carbon steel flanges can withstand high pressure and temperature, ensuring long-term performance.

Cost-Effective:  Carbon steel is more affordable compared to other materials like stainless steel or alloy steel.

Versatility:  Suitable for a wide range of applications                                                        across  various industries.     

Conclusion 

ASTM A105 carbon steel flanges are an essential component in the  infrastructure of many industrial systems. Their mechanical properties, combined with cost-effectiveness and versatility, make them an ideal choice for numerous applications. Understanding the specifications, types, and benefits of these flanges helps in selecting the right component for your specific needs.

For more information on ASTM A105 carbon steel flanges, visit Metalloy International.

[platinexpipingsolution01]

Socket Weld Flanges Manufacturer in Mumbai

About the product

Socket weld flanges, also simply called SW flanges, have a recess (shoulder-like part) in the flange hole. This shoulder serves as a guide for determining the depth of the pipe inserted into the flange. A socket weld type flange was originally designed for small diameter high pressure piping systems. Socket weld pipe flanges are typically useful for smaller, high pressure pipe sizes.  

Specifications

Our socket weld flanges boast a comprehensive range of specifications tailored to meet diverse piping requirements. These flanges are available in sizes from 1/2″ (15 NB) to 48″ (1200 NB) Compliant with industry standards. Our flanges ensure compatibility and reliability, and as well as PN6 to PN64, our products cater to a wide spectrum of operational pressures. Crafted from premium materials.

and liquid within the pipe. This allows for smooth drilling and improves the flow of gas The pipe is attached to the outside of the hub with a flange by filet welding. The main disadvantage of this type of flange is that it is not a highly integrated connection, as the weld is difficult to detect. Socket weld flanges have poor integrity and are not suitable for use at high pressures, so they most often have flat or raised surfaces.

including carbon steel (ASTM A105/A105N, A350, 70, etc.), stainless steel (ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L).

[platinexpipingsolution]

Threaded Flanges Exporters in Mumbai

About The Product

It is similar to a slip-on flange or a socket weld flange, equipped with a tapered thread (screw) in the flange hole and attached to the pipe with a corresponding external thread.

Threaded pipe flanges manufacturers are available in a variety of dimensions, but threaded connections are most often used on small diameter pipelines.

On the other hand, thin-walled pipe systems do not have space for threads and are therefore not compatible.

Grades in Threaded Flanges

Stainless Steel Flanges

Carbon Steel Flanges

Alloy Steel Flanges

Monel Flanges

Inconel Flanges

Hastelloy Flanges

Nickel Alloy Flanges

These are commonly paired with externally threaded pipes, finding applications across industries such as shipbuilding, power generation, petrochemicals, and more. Our threaded flanges boast comprehensive specifications, ranging from 1/2″ to 48″ in size, and adhere to ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, and other standards. Pressure ratings span Class 150 to Class 2500, and PN6 to PN64, offering flexibility for diverse project requirements. With materials including ASTM A105/A105N, A350 LF1/2, ASTM A182 stainless steel grades, and various alloy steels, our threaded flanges ensure reliability and durability in demanding environments.

[shasanpipingsolution]

 Carbon Steel ASTM A105 Flanges Stockists in Mumbai

Shasan Piping Solution stands at the forefront as a prominent provider in the realm of ASTM A105 flanges. These flanges, crafted from forged Carbon Steel ASTM A105 Flanges Manufacturers In India, are engineered to withstand high-temperature environments effectively. Our offerings encompass a diverse range of flange types, each meticulously crafted to meet varying industry

Why Use Carbon Steel ASTM A105?

This material contains carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum, and vanadium. These are called Carbon Steel ASTMs because other materials contain less than 1% of the composition. There are different types, including SA105N blind flanges, which are used to close pipelines. The flange also has excellent strength properties. The minimum yield strength of the flange is 250 MPa and the minimum tensile strength is 485 MPa. It is a hard material with a Brinell hardness of 187.

Other Industries in which Carbon Steel ASTM A105 are Used: Sugar Mills & Distilleries, Chemicals, Petrochemicals, Oil & Natural Gas Organizations, , Fertilizers, Cement Industries, Ship Builders, Paper Industries, Pumps, Automation, Paints, Steel Industries, etc.

There are various pressure classes such as class 150, 300, up to 2500, and PN6 to PN64. A105 flanges of class 300 and below do not require heat treatment, but high pressure class can be heat treated. Flanges with a nominal internal diameter greater than 4 inches are heat treated as annealing, normalizing, normalizing and tempering, or normalizing and tempering. ASTM A105 pipe flanges can also be forged. This material is suitable for welding applications. When welding materials, boilers, and pressure vessels, guidelines consistent with ASME standards must be followed. Flanges are both bolted and bolted. ASTM A105 N threaded flanges are useful when welding or screwing methods are not suitable. Threaded flanges can be used on threaded pipes to create connections without welding.

We exports Carbon Steel ASTM A105 for these countries – Asia, North America, western Europe, Singapore,etc..

Specification of Carbon Steel ASTM A105

Specifications: ASTM A182, ASME SA182

Size: 1/2″ to 48″

Standards: ANSI B16.47 Series A & B, MSS SP44, AWWA, Custom Drawings, ASA, ANSI B16.5, API-605.

Pressure Ratings: Class 400, Class 150, Class 1500, Class 300, Class 900, Class 2500, Class 600

Flange Face Type: Flate Face, Raised Face, Ring Type Joint

Coating/Surface Treatment

Yellow Transparent, Oil Black Paint, Anti-rust Paint, Cold and Hot Dip Galvanized, Zinc Plated.

For More Details

CONTACT US: +91 22-6651 8642  

EMAIL ID: sales@shasanpiping.com

If any enquiries please contact us our support team will connect you as soon as possible.

[ganpatmetalindustries]

 Carbon Steel ASTM A105 Flanges Exporters

These Carbon Steel ASTM A105 Flange are manufacture in different Type of Flanges like Carbon steel Blind Flange, Carbon ASTM A105 Spectacle Blind Flange, Carbon steel Slip On Flange, Carbon steel Socket Welding Flange, Carbon steel ASTM A105 Welding Neck Flange, SORF Flanges, A105 Collar Flange, Carbon steel Plate Flange, Carbon steel ASTM A105 Raised Face Flange, Carbon steel Flat Face Flange, SWRF, WNRF, BLRF, Carbon steel Lapped Joint Flange, Carbon steel Ring Type Joint Flange, Carbon steel Threaded Flange & Carbon steel Long Welding Neck Flanges, Low Temperature CS Flanges, IS 2062 Flanges, ASTM A420 WPL6 Flanges, ASTM A860 WPHY Flanges, ANSI B16.47 Flanges, ANSI B16.36 Flanges, PN 10 Flanges.

CONTACT INFO address Narayan Niwas, Shop No. 3, Near Alankar Cinema, 2nd Khetwadi Lane, Mumbai-400 004, Maharashtra, India. number +91-22-2386-5819 +91-22-2389-3333 email info@ganpatmetal.com ganpatmetalindia@gmail.com

[nutechoverseas]

Loose Flanges Stockists in India

ASME B16.5 Free Flanges types to fit elbows, valves and on a very basic level such a pipeline part being utilized. Carbon Steel Free Flanges is a contraption that is welded onto the completing of a hint of line to make half of a flanged coupling. Containing level steel passing on with astonish openings around the edge and an opening in the center the size of the line that is should have been welded onto solidified steel free Flanges, the part can be made of carbon steel or Stainless Steel to meet the proposed application.

ASME B16.5 Free Flanges manufacturers in India. We are dispatching SS Free Flanges, Free Exhaust Flanges, EN 1092-2 PN16 Free plate flanges and Free Plate flanges at bound costs mulling over reasonable master hours in India and crucial wellspring of first in class ASME B16.47 Series a Free Flanges, most ideal situation, cost open in Mumbai, India.

Nutech Overseas We have worked with store of Noise 2642 Free Flanges, PN10 Free Flanges, EN1092-1 Free Flanges and jis 10k Free Flanges, Best case scenario, worth once-over in India. Stainless Steel Free Flanges affirmed by Saudi Aramco. We keep up beast ably of MSS SP-44 SS Free Line Flange.Nutech Overseas is scientist and transporter of Duplex Steel Free hubbed Flanges, Noise 86029 PN10 Free hubbed Flanges in various sizes.

Loose Flanges Manufacturers, Loose Flanges Suppliers, Loose Flanges Stockists, Loose Flanges Exporters

Stacking huge level of ASTM A350 Gr LF2 Free Flanges to buy, most ideal situation, cost in India, enquire our expense of Carbon Steel Free Flanges including Level Face Free flanges, AWWA C207 Free steel flanges and ASME B16.5 Class 300 Free Flanges. Free Line Flanges to Thailand, Russia, Kuwait, France, Australia, Malaysia, USA, Iran, Italy, Sweden, Egypt, Bahrain, Turkey, UAE, Germany, Qatar, Singapore, Indonesia, UK, Israel, Oman,Canada, Sri Lanka and Saudi Arabia.

We are most conspicuous giving relationship of ASTM A105 Free flanges, most ideal situation, cost as we are one of the most surprising supplier and carrier of Nutech Overseas steel Free Flanges in India. We have our stocking wholesalers in Delhi, Bangalore, Surat, (Gujarat), Hyderabad, Pune (Maharashtra) and Chennai in Tamil Nadu. Check once our ASTM B381 F5 Free Flanges cost going prior to buying Produced Free Water powered Flanges from India or China. other than mail for our live deftly of Hastelloy Free Sae Flanges to check types and sizes with our set up stock we can give you best expense of EN 1092-1 Sort 02 Carbon Steel Free Flanges.

We can also give free occasion of ASME B16.5 Free Flange,Nutech Overseas is having our Vendor and Merchant in Aurangabad, Kolkata, Faridabad, Ludhiana, Chennai (Madras), Chhattisgarh, Vadodara, Tamil Nadu, Pune, Ahmedabad, Maharashtra, Nagpur,Bangalore, Punjab, Rajkot, Delhi, West-Bengal, Khopoli, Raipur, Indore, Haryana, Gujarat, Uttar Pradesh, Jaipur, Rajasthan, Karnataka, Ghaziabad, Gurgaon, Kolhapur, Bhosari, Madhya Pradesh, Karnataka. So in case you are looking for best expense of BS 4504 PN10 Split free or ASME B16.47 Series b Free Flanges, Stainless Steel Free Flanges near you with briefest time improvement or free occasion of ANSI b16 5 Free Flanges.

[cortensteeltube]

Grades of material used for pipes, fittings, flanges according to various Astm standards

What are ASTM Grades..

ASTM standards define the specific manufacturing process of the material and determine the exact chemical composition of pipes, fittings and flanges, through percentages of the permitted quantities of carbon, magnesium, nickel, etc., and are indicated by “Grade”. Cortensteeltube.com is one of the leading corten steel suppliers in Mumbai.

For example, a carbon steel pipe can be identified with Grade A or B, a stainless-steel pipe with Grade TP304 or Grade TP321, a carbon steel fitting with Grade WPB etc.

Below you will find as an example 3 tables with chemical requirements for..

Flanges ASTM A182 Grade F304, F304L F316L

Pipes ASTM A312 Grade TP304, TP304L, TP3016L

Fittings ASTM A403 Grade WP304, WP304L, WP316L

Pipes

A106▸ This specification covers carbon steel pipe for high-temperature service.

A335▸ This specification covers seamless ferritic alloy-steel pipe for high-temperature service.

A333▸ This specification covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures.

A312▸ Standard specification for seamless, straight-seam welded, and cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.

Fittings

A234▸ This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction.

A420▸ Standard specification for piping fittings of wrought carbon steel and alloy steel for low-temperature service.

A403▸ Standard specification for wrought austenitic stainless steel piping fittings.

Flanges

A105▸ This specification covers standards for forged carbon steel piping components, that is, flanges, fittings, valves, and similar parts, for use in pressure systems at ambient and higher-temperature service conditions.

A182▸ This specification covers forged or rolled alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service.

A350▸ This specification covers several grades of carbon and low alloy steel forged or ring-rolled flanges, forged fittings and valves for low-temperature service.

Valves

A216▸ This specification covers carbon steel castings for valves, flanges, fittings, or other pressure-containing parts for high-temperature service and of quality suitable for assembly with other castings or wrought-steel parts by fusion welding.

A217▸ This specification covers steel castings, martensitic stainless steel and alloys steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for high-temperature and corrosive service.

A352▸ This specification covers steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for low-temperature service.

A182▸ This specification covers forged or rolled alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service.

Bolts and Nuts

A193▸ This specification covers alloy and stainless steel bolting material for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications.

A320▸ Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service.

A194▸ Standard specification for nuts in many different material types.

Tap here to read more about this article:

[jimitjain]

What Are Carbon Steel Flanges & Their Types

What exactly are the carbon steel flanges?

Carbon steel flanges are a typical type of flange made of carbon steel. Carbon steel pipe flanges have a higher carbon content than stainless steel grades. This material has corrosion resistance, extended durability, and improved item finishes.

India’s Largest Carbon steel flanges Supplier, Manufacturers, and Stockist

Metalica Forging Inc. is one of India's reputed Carbon Steel Flanges Manufacturer. Carbon Steel Fittings are developed and produced in line with the IQS (International Quality Standards). We are also India's well-known Flanges Manufacturer.

Specification of Carbon Steel Flanges:

Carbon Steel flanges are handcrafted by skilled artisans using only the highest quality materials. CS Flanges come in various lengths, diameters, grades, shapes, standards, and thicknesses.

Specifications : ASTM A105 / ASME SA105

Standard: ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

Size: 1/2″NB TO 60″NB

Class: 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Face Type: Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Dimension Standard: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

We Supply these high-quality flanges in so many cities. We are a leading flanges manufacturer in Pune, flanges manufacturers in Mumbai, Flange Manufacturer in Rajkot, and flanges manufacturer in Delhi.

Types Of Flanges:

Hub Flanges:

The elevated circular regions where the spokes are joined to a bicycle hub are called hub flanges. By uniformly spreading the spoke strain along the hub's diameter, they are often made of steel or aluminum and offer structural support for the wheel.

>Hub Flanges Manufacturer in India

Without Hub Flanges:

some variations of bicycle wheel designs that do not have traditional hub flanges.

For example, some single-speed and fixed-gear bicycles use what is called a "flip-flop" hub, which has a threaded section on both sides of the hub for mounting a freewheel or fixed-gear cog. These types of hubs may have a flat surface where the spokes are attached instead of traditional raised flanges.

>Without Hub Flanges Manufacturer in India

Plate Flanges:

In industrial applications, plate flanges are a type of flange that is frequently used to connect pipes, valves, and other machinery. Usually formed of materials like carbon steel, stainless steel, or cast iron, they are comprised of a flat, circular disc with uniformly spaced bolt holes all the way around.

>Plate Flanges Manufacturer in India

Slip on Flanges:

In industrial applications, slip-on flanges, a form of plate flange, are frequently used to connect pipes, valves, and other machinery. They typically consist of a flat, circular disc with a borehole in the center and uniformly spaced bolt holes around the periphery and are composed of materials like carbon steel, stainless steel, or cast iron.

>Slip on Flanges Manufacturer in India

Blind Flanges:

An end of a pipe, valve, or pressure vessel is sealed with a blind flange, a type of flange. In order to provide a tight seal that prevents fluid or gas from escaping, they are made to be bolted onto the end of the pipe or piece of machinery.

>Blind Flanges Manufacturer in India

Socket Weld Flanges:

A socket weld is a type of pipe fitting that is used to join two pipes together by inserting the end of one pipe into the socket of another. The joint is then welded, creating a strong and permanent connection between the two pipes.

>Socket Weld Flanges Manufacturer in India

Product: Flanges Manufacturer In India

[flangesnuts]

standard of flanges

JIS B 2311 / 2312 / 1213 Flange

JIS B 2311 Blind Flanges, JIS B 2312 Slip on Flanges, Nickel Alloy JIS B 2311 Flanges, JIS B 2311 Class 300 Flanges, JIS B 1213 Raised Face Flange, Best Deals on Raised Face JIS B 2311 Flanges, Carbon Steel JIS B 2311 Flange, Stainless Steel JIS B 2311 Flange deaaler in India.

IS B 2311 / 2312 / 1213 Flange PRICE LIST

We provide wide variety of JIS B 2311 / 2312 / 1213 Flange that in compliance with IS, BS and DIN standards at pleasant marketplace costs in India. To realize more about the brand new rate of stainless-steel orifice Flanges Please contact on the given details below

JIS B 2311 / 2312 / 1213 FLANGES MATERIAL & GRADES

Stainless Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A182 F 304, 304L, 304H, 309, 310, 310S, 316, 316L, 317, 317L, 321, 321H, 347, 347H, 446, 904L

Carbon Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A105, ASTM A694 Gr. F42, 46, 52, 56, 60, 65, 70

Alloy Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A182, F1, F5, F9, F11, F22, F91

Duplex Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A182, F44, F45, F51, F53, F55, F60, F61

Super Duplex JIS B 2311 / 2312 / 1213 Flanges

ASTM A182, F44, F45, F51, F53,

High Nickel Alloy JIS B 2311 / 2312 / 1213 Flanges

ASTM B564, B160, B472, B162, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade 2 & 5), Cupro-Nickel 70/30, Cupro-Nickel 90/10.

Low Temperature Carbon Steel JIS B 2311 / 2312 / 1213 Flanges

ASTM A350, LF2, LF3F55, F60, F61

Address: 119/123, Dr mahimtura marg, 3rd khumbharwada lane, Mumbai -4

Open Hours:

Monday-Saturday ; 9am - 6pm Sunday holiday

Email:

info@ronakoverseas.in sales@ronakoverseas.in

[trimac7]

Trimac Piping Solution - Best Carbon Steel flanges manufacturer in India

Get the best Carbon Steel flanges at the best price from Trimac Piping Solution. We are one of India's major manufacturers, suppliers, and exporters of Carbon Steel Flanges Manufacturer in India. We provide our customers with dependable, cost-effective, and high-quality excellent Carbon Steel A105 Forged Flanges that meet international ANSI and ANSI dimensional specifications. Trimac Piping Solutions Flanges are the leading value solution for all of your flange needs thanks to its extensive capability range, great quality, and unsurpassed customer service. 

Trimac Piping Solutions is one of the largest Flanges Manufacturers in Mumbai & Flange Manufacturer in Ahmedabad.

Flanges, after welding, are the second most frequent joining method, providing a reliable way to connect pipe systems with the various equipment, valves, and other components of virtually any processing system. Because flanges allow for quicker disassembly and better access to system components, they provide you with more alternatives when it comes to managing piping systems.

Trimac Piping Solutions is a leading supplier of Stainless Steel Flanges of the highest quality. Trimac Piping Solutions has a long history of providing stainless steel flanges and it is one of the best Flanges Manufacturers in India. We take pride in our quick and accurate 

Trimac Piping Solution is one of the leading SS flanges manufacturers with Carbon Steel Flanges Manufacturer in India. We provide dependable, affordable, and outstanding Stainless Steel Flanges products to our customers in accordance with worldwide standard ASTM and dimensional standard ANSI/ASME. a wide range of capabilities, and great quality. We are also carbon steel flanges manufacturers in Different Countries.

Flanges Manufacturer in South Africa

Flanges Manufacturer in UAE

Flanges Manufacturer in Dubai

[omaametalsource]

astm b564 uns n06600 BLRF Flanges

Omaa Metal Sources,We produce Stainless steel Blind Flange in various sizes and evaluations. Check established steel shock rib weight and treated steel shock rib evaluations before you secure for your errand. Similarly check tempered steel shock spine costs .Our most selling thing is 4 inch class 150 304 Stainless Steel shock rib. We likewise make 8 inch tempered steel shock rib, 6 Inch and 3 Inch SS deaden Flange in Class 150, CL 300 and Class 600. Check pressure rating, Sizes, appraisals and weight diagram of tempered steel dumbfound plate spines. Tempered steel Blind ribs manufacturers in india which are dependably used in petrochemical, pipe organizing, public affiliations and water works. class 300 apparently disabled rib manufacturer in Mumbai, Maharashtra which is significant for making fixes to a pipeline further the line.

Material of Flat Face Blind Flange

Carbon Steel Forged Blind Flanges

Alloy Steel High-Temp Flat Face Blind Flanges

Alloy Steel Low-Temp Class 150 Blind Flanges

Austenitic Stainless Steel Ring joint Blind Flanges

Nickel Alloy BLRF Flanges

Titanium Class 150 Blind Flanges

A105 Blind Flanges

A182 Gr F1 Pn16 Blind Flanges

A182 Gr F11 BLRF Flanges

A182 Gr F12 Forged Blind Flanges

A182 Gr F22 Blind Flanges

A182 Gr F5 Ring joint Blind Flanges

A182 Gr F9 Flat Face Blind Flanges

A350 Gr LF2 BLRF Flanges

A350 Gr LF3 Blind Flanges

A182 Gr F304 Class 150 Blind Flanges

A182 Gr F316 Flat Face Blind Flanges

A182 Gr F321 BLRF Flanges

A182 Gr F347 Blind Flanges

A182 Gr F304L Pn16 Blind Flanges

A182 Gr F316L Forged Blind Flanges

A182 Gr F317 Flat Face Blind Flanges

A182 Gr F317L BLRF Flanges

A182 Gr F321 Pn16 Blind Flanges

A182 Gr F310 Ring joint Blind Flanges

A182 Gr 347 Blind Flanges

ASTM B564 Ring joint Blind Flanges

astm b564 uns n06600 BLRF Flanges

astm b564 uns n06625 Class 150 Blind Flanges

astm b564 uns no4400 Flat Face Blind Flanges

astm b564 uns n08810 BLRF Flangse

astm b564 uns n08811 Pn16 Blind Flanges

astm b564 uns n08825 Blind Flanges

astm b564 uns n04400 Flat Face Blind Flanges

astm b564 uns n10276 Forged Blind Flanges

astm b564 uns n10665 Ring joint Blind Flanges

astm b381 grade f2 Ring joint Blind Flanges

astm b381 f5 Forged Blind Flanges

astm b381 f3 Blind Flanges

astm b381 f12 Flat Face Blind Flanges

astm b381 f7 BLRF Flanges

[diptimetals]

ANSI Norm Flanges Exporters in India

One of the largest manufacturers and suppliers of ANSI flange, carbon steel ANSI flange, stainless steel ANSI flange, alloy steel ANSI flange in India.

We are leading manufacturers of ANSI flange and have huge stock of 304 ANSI flange, 316 ANSI flange, ASTM a105 ANSI flange, ASTM a182 ANSI flange as per ASME/ANSI b16.5 ANSI flange, ANSI b16.47 ANSI flange, din ANSI flange, JIS ANSI flange and UNI ANSI flange standards.

Best price of ANSI flange in all size, classes and dimensions like class 150 ANSI flange, class 300 ANSI flange, class 600 ANSI flange, class 900 ANSI flange, class 1500 ANSI flange and class 2500 ANSI flange in India.

ANSI Flange Manufacturer And Suppliers In India.ANSI Flange/Alloy Carbon Stainless Steel ANSI Flange Manufacturer and Suppliers in Mumbai (Bombay) India.

Searching for ANSI flange in specific standards and size at factory rate?

ANSI ASME B16.5 FLANGES,ANSI and ASME B16.5 PIPE FLANGES

What's the contrast between ANSI B16.5 and ASME B16.5 ?

The B16.5 standard was first distributed by ANSI in 1973. Before that it was an ASA standard. In 1996 the standard changed to ASME B16.5. For a long time preceding the change, the standard included both and was recorded as ANSI/ASME B16.5.

So what's the distinction? The appropriate response is there is no distinction. The ASA, ANSI and ASME have persistently refined and expanded the B16.5 standard. I'm certain there is a board of trustees taking a shot at future improvements at the present time.

The present and right standard is ASME B16.5. ANSI B16.5 is regular industry language is still alluded to widely by modelers, designers, makers and providers. What's more, in spite of the fact that the ANSI B16.5 standard does not in fact exist, it its comprehended as another approach to state ASME B16.5.ANSI B16.5 Class 150 FlangesANSI flanges are accessible at Dipti Metal Industries in class 150.

The ANSI flanges in the class 150 determination cover slip-ons, weld necks, lap joints, blinds, strung and attachment weld flanges. ANSI flanges for class 150 are given by Dipti Metal Industries as forgings unless generally indicated.The B16.5 Standard characterizes the accompanying:

DIPTI METAL INDUSTRIES is committed to satisfy the various needs of customers have been part of our role in the industry, since our inception in 2009 as a manufacturer of Pipe Fittings in accordance with National & International Standards.

[shasanpipingsolution]

 Carbon Steel ASTM A105 Flanges Stockists in Mumbai

Carbon Steel ASTM A105 Flanges Manufacturers In India | Carbon Steel ASTM A105 Flanges Suppliers In India

Shasan Piping Solution stands at the forefront as a prominent provider in the realm of ASTM A105 flanges. These flanges, crafted from forged Carbon Steel ASTM A105 Flanges Manufacturers In India, are engineered to withstand high-temperature environments effectively. Our offerings encompass a diverse range of flange types, each meticulously crafted to meet varying industry

Why Use Carbon Steel ASTM A105?

This material contains carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum, and vanadium. These are called Carbon Steel ASTMs because other materials contain less than 1% of the composition. There are different types, including SA105N blind flanges, which are used to close pipelines. The flange also has excellent strength properties. The minimum yield strength of the flange is 250 MPa and the minimum tensile strength is 485 MPa. It is a hard material with a Brinell hardness of 187.

Other Industries in which Carbon Steel ASTM A105 are Used: Sugar Mills & Distilleries, Chemicals, Petrochemicals, Oil & Natural Gas Organizations, , Fertilizers, Cement Industries, Ship Builders, Paper Industries, Pumps, Automation, Paints, Steel Industries, etc.

Carbon Steel ASTM A105 Manufacturers, Carbon Steel ASTM A105 Suppliers, Carbon Steel ASTM A105 Stockists, Carbon Steel ASTM A105 Exporters

Carbon Steel ASTM A105 Flanges Manufacturers in India, Carbon Steel ASTM A105 Flanges Suppliers in India, Carbon Steel ASTM A105 Flanges Stockists in India, Carbon Steel ASTM A105 Flanges Exporters in India

There are various pressure classes such as class 150, 300, up to 2500, and PN6 to PN64. A105 flanges of class 300 and below do not require heat treatment, but high pressure class can be heat treated. Flanges with a nominal internal diameter greater than 4 inches are heat treated as annealing, normalizing, normalizing and tempering, or normalizing and tempering. ASTM A105 pipe flanges can also be forged. This material is suitable for welding applications. When welding materials, boilers, and pressure vessels, guidelines consistent with ASME standards must be followed. Flanges are both bolted and bolted. ASTM A105 N threaded flanges are useful when welding or screwing methods are not suitable. Threaded flanges can be used on threaded pipes to create connections without welding.

We exports Carbon Steel ASTM A105 for these countries – Asia, North America, western Europe, Singapore,etc..

Specification of Carbon Steel ASTM A105

Specifications : ASTM A182, ASME SA182

Size : 1/2″ to 48″

Standards : ANSI B16.47 Series A & B, MSS SP44, AWWA, Custom Drawings, ASA, ANSI B16.5, API-605.

Pressure Ratings :Class 400, Class 150, Class 1500, Class 300, Class 900, Class 2500, Class 600

Flange Face Type : Flate Face, Raised Face, Ring Type Joint

Coating/Surface Treatment :Yellow Transparent, Oil Black Paint, Anti-rust Paint, Cold and Hot Dip Galvanized, Zinc Plated.

For More Details

CONTACT US: +91 22-6651 8642  

EMAIL ID: sales@shasanpiping.com

If any enquiries please contact us our support team will connect you as soon as possible.

[redearthsteels27-blog]

ASTM A105N Flanges

Red Earth Steels is Leading Manufacturer of ASTM A105N Flanges in Mumbai, India. We Producing ASTM A105 WN Flange, 30 Inch, 150LB, Raised Face Flanges, A105 Threaded Flange, 2 Inch x NPTF 1-1/2 Inch, RF, Black flanges, ASTM A105 Slip on Flange, DN100, PN40, EN1092-1 Flanges, ASTM A105 Plate Flange, EN1092-1 Type 01, Class 120, 6 Inch Flanges at a cheap rate. Red Earth Steels is a ISO Certified Supplier of A105 Normalized Flanges in Mumbai, India. We supply ASTM A105 CL1/CL2 Flanges size Raange 1/2″ (15 NB) to 48″ (1200NB). Red Earth Steels is an exporter of Carbon Steel Flanges in India. We export in Bahrain, Thailand, UK, South Africa, Indonesia, Kuwait, Oman, Saudi Arabia (KSA), Vietnam, United Arab Emirates (UAE), Malaysia, Singapore, Qatar & Philippines. We also Manufacturer A105 Wnrf Flanges & Carbon Steel A105 Reducing Flanges. We also stockist of Carbon Steel ASTM A105, 105N Male & Female Flanges in different sizes. Ask us for free sample of CS A105 Blind Flange. For more types, size and price list to visit us on http://bit.ly/2H7M5UI this link. 

[nutechoverseas]

High Hub Socket Weld Flanges Stockists in India

High Center point Flanges is an especially round plate with no middle hold bordering with the most magnificent shock openings. It is utilized to shut wraps down of redirecting plans. It is open in different sizes and materials and is utilized to give positive closer on the perceive of Pipes & Tubes, valves or hardware spouts.

High Center point Blind Flanges manufacturers in India. We are offering ASME B16.5 High Center point Blind Flanges, Carbon Steel High Center point Blind Flanges, High Center point Blind steel pipe flanges and Alloy 20 Huge High Center point Blind Flanges at Processing plant cost considering sensible expert hours in India and top wellspring of undeniable EN 1092-2 PN16 High Center Visually impaired Flanges, most very smart arrangement, cost open in Mumbai, India. Check Value design of 150# Raised Face High Center Flanges and High center point stagger Flanges examinations.

Nutech Overseas is speediest making manufacturers of Stainless Steel High Center point Blind Flanges guaranteed by Saudi Aramco. We are most crucial examiner of ANSI b16 5 High Center Flanges. Nutech Overseas is most obvious exporter of Nutech Overseas steel High Center point flanges, Nickel Alloy High Center point Blind Flanges in different sizes.

High Hub Socket Weld Flanges Manufacturers, High Hub Socket Weld Flanges Suppliers, High Hub Socket Weld Flanges Stockists, High Hub Socket Weld Flanges Exporters

Purchase from our arranged stock Class 150 High Center point Blind Flanges, most very smart arrangement, cost in India, notice our cost of ASME B16.5 High Center point Blind Flanges including Hastelloy C22 High Center Visually impaired Flanges, Nickel Alloy 200 High Center point Blind Flanges and Copper Nickel Enormous High Center point Blind Flanges. ASTM A105 carbon steel high Center point Blind Flanges to Germany, Canada, Singapore, Russia, Malaysia, Oman, Turkey, Sweden, Kuwait, Italy, Qatar, UK, Indonesia, Egypt, UAE, Australia, Israel, Iran, Thailand, Bahrain, France, USA, Sri Lanka and Saudi Arabia.

We are driving exporter and suppliers of AWWA C207 Nutech Overseas 20 High Center point Blind Flanges and Stainless Steel High Center Visually impaired Flanges, most very smart arrangement, cost as we are one of the most unfathomable suppliers and vendor of MSS SP-44 High Center point Blind Flanges in India. We have our stocking wholesalers in Delhi, Bangalore, Surat, (Gujarat), Hyderabad, Pune (Maharashtra) and Chennai in Tamil Nadu. Check once our ASTM A182 SS High Center Visually impaired Flanges and Stainless Steel Furrow and Tongue Flanges cost going preceding purchasing High Center Visually impaired Flanges from India or China. moreover mail for our live deftly of A350 Gr LF2 Tapped Center point Blind Flanges to check types and sizes with our set up stock we can give you best cost of Carbon steel High Center Flanges.

We can likewise give free event of High Center Visually impaired steel pipe Flanges, Nutech Overseas is having our Vendor and Merchant in Khopoli, Punjab, Gurgaon, Kolkata, Kolhapur, Rajkot, Ahmedabad, Delhi, Karnataka, Rajasthan, Karnataka, Pune, Jaipur, Madhya Pradesh, Tamil Nadu, Bangalore, Faridabad, Chhattisgarh, Vadodara, Gujarat, Aurangabad, Uttar Pradesh, Maharashtra, West-Bengal, Indore, Ghaziabad, Bhosari, Nagpur, Haryana, Chennai (Madras), Ludhiana, Raipur. So on the off chance that you are searching for best cost of Hastelloy High Center point Blind Flanges or Carbon Steel High Center Visually impaired Flanges, ANSI b16 5 High Center point flanges close to you with briefest time transport or free event of Commotion 86029 PN10 High spot obviously deterred Flanges.