#12 volt motor pump

[diymechanic]

Homemade Solar Panel: Repurpose Old CDs for Energy

Do you want to join the renewable energy revolution without breaking the bank?

With just a few simple materials, you can repurpose old CDs to make a photovoltaic solar panel that can generate up to 12 volts of energy.

You'll be amazed at what you can do with a homemade solar panel - power LED bulbs, motors, and even water pumps!

So let's get started and make a difference.

Gather Materials

To make your own solar panel, you'll need some recycled materials. These include aluminum foil, PVC pipe, wood, screws, washers, cable, and used CDs. By using recycled materials for DIY projects, you can benefit from repurposing old CDs and create a sustainable and eco-friendly solar panel.

Here are some tips for building a solar panel at home:

Start by disassembling the frame and use a piece of pipe to make a support that is inclined at 45 degrees.

Then, mark the position of the CDs and drill the holes.

After that, cover the frame with aluminum foil and stick it with adhesive tape.

Add the cables and screw the plug on the rear.

Finally, place the CDs and connect them with the electrodes.

Now you have a 12-volt solar panel!

Crafting a Solar Panel

Now, let's start crafting our own solar panel using recycled materials!

To do this, we will need:

15 used CDs

A piece of PVC pipe

Aluminum foil

A piece of wood

Two screws

Two washers

A piece of cable with terminals

A frame

With these materials, we will be able to make a 12-volt solar panel that will be able to sustainably power a variety of applications.

Here's how we'll do it:

Turn the frame over and mark where the PVC pipe will go.

Heat the end of the pipe and flatten it.

Mark three holes to screw the pipe to the wood.

Secure the support by screwing the pipe to the wood.

Cover the surface with aluminum foil and secure it with transparent adhesive tape.

Attach the cables and the CDs, making sure to connect the electrodes to the aluminum foil.

Place the frame and the glass protector to complete the solar panel.

With increased solar panel efficiency, our DIY solar panel projects can be great sustainable energy solutions!

Adding the Conductive Parts

You will need to cut a 60-centimeter piece of paper into three pieces and two 40-centimeter pieces. Mark a hole for the cable to come through.

Now, with the two 40-centimeter pieces, fold them to create two conductors.

Then, with the three 60-centimeter pieces, fold them to create three conductors.

You will then use these conductors to form the conductive tracks on top of the CDs.

To secure the tracks, use a transparent adhesive tape. This will ensure that the electrodes of the positive cable make good contact with the silicon layer of the CDs.

Experiment with different conductive materials to see what has the greatest impact on the solar panel's efficiency.

Creating the right conductive tracks will help to maximize the power generated by the solar panel.

Creating the CD Matrix

Start by gluing the CDs together in the center with hot glue.

Explore alternative materials, enhance solar panel efficiency, and design a compact solar panel.

Take the time to mark the position of the CDs and carefully drill holes.

Use heat to flatten the tube and secure it with the screws.

Cut the paper into 2 x 40-centimeter pieces and 3 x 60-centimeter pieces.

Place the pieces on the wood and mark a hole for the cable.

Put aluminum foil on the frame and attach it with adhesive tape.

Screw the bracket plug from the leg to the back.

Put the screw in the center of the holes and insert the cable.

Place the electrodes on the CDs and connect it with the cable.

Secure the CDs with hot glue and add a glass protector with an aluminum frame.

Testing the Homemade Solar Panel

Connect the voltmeter to check the voltage the panel is giving you. You can see it is providing a consistent 12.5 volts.

To test it further, you can also connect a 12V light bulb to the cables and it will turn on without any issues.

The fact that this power is coming from just a homemade solar panel is amazing and can be used in a number of ways. For instance, you can power a motor, a water pump, or even light your home. You can also charge your phone with it.

Comparing with commercial solar panels, it is just as efficient and cost-effective as the store bought ones.

However, the performance of the panel can be affected by weather conditions, so it is important to keep that in mind.

Summary

You can now enjoy the benefits of renewable energy without breaking the bank with your homemade solar panel!

With 15 used CDs and a few simple materials, you can generate up to 12 volts of energy. It's an easy project that can power LED bulbs, motors, and water pumps.

The best part is that you can save around 80% on your energy bill.

So, start the project today and get ready to reap the rewards of renewable energy!

[themarineking]

ULTIMATE GUIDE TO RULE 800 GPH BILGE PUMPS

Bilge pumps play a crucial role in maintaining the safety and integrity of a boat or any marine vessel. One popular and reliable option in the market is the Rule 800 GPH Bilge Pump. In this comprehensive guide, we will delve into the basics of bilge pumps, explore the features and specifications of the Rule 800 GPH model, provide a step-by-step installation guide, offer tips for maintenance and troubleshooting, and compare the Rule 800 GPH with other bilge pump models.

UNDERSTANDING THE BASICS OF BILGE PUMPS

WHAT IS A BILGE PUMP?

Before we dive into the specifics of the Rule 800 GPH Bilge Pump, it is essential to understand the fundamental concept of bilge pumps. A bilge pump is a device designed to remove water or other liquids that collect in the bilge of a boat or ship. The bilge is the lowest compartment of a vessel, often prone to water accumulation due to various factors such as leaks, rain, or even wave motion.

It is important to note that there are different types of bilge pumps available, ranging from manual hand pumps to automatic electric pumps. Each type serves a specific purpose and is chosen based on the size of the vessel, the amount of water expected in the bilge, and the level of automation desired by the boat owner.

IMPORTANCE OF BILGE PUMPS IN MARINE SAFETY

The significance of bilge pumps in maintaining marine safety cannot be overstated. Without an efficient bilge pump system, even a small amount of water in the bilge can lead to detrimental consequences, including instability, electrical failures, and sinking. Bilge pumps not only help prevent such hazards but also play a critical role in maintaining buoyancy and stability of the vessel.

Furthermore, modern bilge pump systems often come equipped with sensors and alarms to alert the boat operator of any water accumulation in the bilge. This early warning system is crucial in preventing potential disasters at sea and allows for timely intervention to address any water ingress issues.

EXPLORING THE RULE 800 GPH BILGE PUMP

When it comes to marine equipment, the Rule 800 GPH Bilge Pump stands out as a reliable and efficient choice for boat owners and marine enthusiasts alike. This pump is not just a piece of equipment; it is a crucial component that helps safeguard your vessel against potential water damage. With its impressive capacity to handle up to 800 gallons of water per hour, this pump is a powerhouse in water removal, giving you peace of mind during your boating adventures.

KEY FEATURES OF RULE 800 GPH BILGE PUMP

The Rule 800 GPH Bilge Pump boasts an array of features that make it a top choice for boat owners and marine enthusiasts. With a powerful 12-volt motor, it can effectively handle up to 800 gallons of water per hour. This pump features a compact design, making it easy to install in tight spaces. Its efficient and reliable operation ensures effective water removal, reducing the risk of flooding and damage to your vessel.

Moreover, the Rule 800 GPH Bilge Pump is not just about power; it also prioritizes convenience. Its compact design allows for versatile installation options, ensuring that you can fit it into various configurations on your boat. The pump's robust construction and high-quality materials guarantee longevity and performance, even in demanding marine environments.

TECHNICAL SPECIFICATIONS

Let's take a closer look at the technical specifications of the Rule 800 GPH Bilge Pump. This pump is designed for use in 3/4 inch (19mm) or 1-1/8 inch (28.5mm) hose sizes. It features a compact, non-automatic design, meaning it requires manual activation. The Rule 800 GPH Bilge Pump incorporates high-quality materials such as marine-grade stainless steel shafts and rugged thermoplastic bodies, ensuring longevity and durability.

INSTALLATION GUIDE FOR RULE 800 GPH BILGE PUMP

TOOLS REQUIRED FOR INSTALLATION

Prior to installing the Rule 800 GPH Bilge Pump, gather the necessary tools to ensure a smooth and hassle-free process. You will need a drill with a suitable bit, wire cutters or strippers, soldering iron, electrical tape, heat shrink tubing (if needed), screwdriver, and marine-grade sealant. It is crucial to ensure that all installations adhere to the manufacturer's guidelines and any local regulations.

Additionally, it's recommended to have a voltage tester on hand to ensure the power source is properly identified before beginning the installation process. This will help prevent any electrical mishaps and ensure a safe installation.

STEP-BY-STEP INSTALLATION PROCESS

Now, let's walk through the installation process step by step to ensure proper setup of the Rule 800 GPH Bilge Pump. Begin by selecting an appropriate location for installation that allows easy access to the bilge. Use the drill to create necessary holes and mount the pump securely. Connect the necessary wiring, ensuring proper connections and waterproofing with marine-grade sealant. Test the pump and ensure it operates smoothly before finalizing the installation process.

Remember to secure any loose wiring and ensure that the pump is securely fastened to prevent any vibrations or movement during operation. Proper installation is key to the longevity and effectiveness of the Rule 800 GPH Bilge Pump.

MAINTENANCE AND TROUBLESHOOTING OF RULE 800 GPH BILGE PUMP

When it comes to ensuring the longevity and optimal performance of your Rule 800 GPH Bilge Pump, incorporating routine maintenance practices is key. Beyond just the basic upkeep, diving deeper into the maintenance process can significantly enhance the pump's efficiency and durability. In addition to cleaning the pump and inspecting for wear and tear, consider flushing out the system with fresh water to remove any accumulated debris or residue that could impede its functionality over time.

Furthermore, exploring the inner workings of the pump can unveil insights into its performance. Taking the time to disassemble the pump (following manufacturer guidelines) and inspecting each component can provide valuable information on areas that may require extra attention. This hands-on approach not only allows for a more thorough maintenance routine but also fosters a deeper understanding of the pump's mechanics.

ROUTINE MAINTENANCE TIPS

To maximize the lifespan and performance of your Rule 800 GPH Bilge Pump, regular maintenance is essential. Cleaning the pump regularly, checking for any signs of wear or damage, and replacing worn-out parts are simple yet crucial maintenance tasks. Additionally, it is advisable to test the pump periodically to ensure it is operating efficiently, as well as inspecting the electrical connections and wiring for any potential issues.

COMMON ISSUES AND THEIR SOLUTIONS

Despite their reliability, bilge pumps may face occasional issues. It is vital to be aware of common problems and their solutions to minimize any potential downtime. Some common issues that may arise include clogging due to debris, electrical failures, and excessive noise. In such cases, clearing any blockages, checking electrical connections, and lubricating moving parts can often resolve the problems.

COMPARING RULE 800 GPH BILGE PUMP WITH OTHER MODELS

RULE 800 GPH VS. 500 GPH BILGE PUMPS

When it comes to choosing the right bilge pump for your vessel, comparing different models can be helpful. Let's compare the Rule 800 GPH with the 500 GPH bilge pump model. The Rule 800 GPH offers higher pumping capacity, making it suitable for larger boats or those with higher water accumulation rates. However, the 500 GPH model may be more suitable for smaller vessels or situations where lower pumping capacity is sufficient.

RULE 800 GPH VS. 1100 GPH BILGE PUMPS

Another important comparison is between the Rule 800 GPH and the 1100 GPH bilge pump models. While both models serve their purposes well, the Rule 800 GPH strikes a balance between pumping capacity and power consumption. If energy efficiency is a priority, the Rule 800 GPH is an excellent choice. However, for boats requiring higher pumping capacity, the 1100 GPH model may be more suitable.

Now, let's delve deeper into the features and specifications of the Rule 800 GPH Bilge Pump. This pump is designed with a durable and corrosion-resistant housing, ensuring its longevity even in harsh marine environments. Its compact size allows for easy installation in tight spaces, making it a convenient choice for boat owners. The Rule 800 GPH also features a built-in float switch, which automatically activates the pump when the water level reaches a certain point, providing efficient and reliable operation.

In addition to its exceptional performance, the Rule 800 GPH Bilge Pump is equipped with a robust motor that delivers consistent and powerful pumping action. This ensures that water is efficiently removed from the bilge, keeping your boat dry and safe. The pump's efficient design minimizes power consumption, allowing for extended battery life and reducing the strain on your vessel's electrical system.

Furthermore, the Rule 800 GPH Bilge Pump is backed by a reputable manufacturer with a long history of producing high-quality marine products. This ensures that you are investing in a reliable and trusted brand that stands behind its products. With proper installation and regular maintenance, the Rule 800 GPH Bilge Pump will provide years of dependable service, giving you peace of mind while out on the water.

In conclusion, the Rule 800 GPH Bilge Pump offers a reliable and efficient solution for maintaining marine safety and preventing water accumulation in the bilge of your boat. By understanding the basics of bilge pumps, exploring the features and specifications of the Rule 800 GPH model, following the installation guide, and implementing proper maintenance practices, you can ensure the optimal performance of your bilge pump system. Moreover, comparing the Rule 800 GPH with other models enables you to make an informed decision that suits your vessel's requirements.

[electronic-spices]

Specifications:-

Speed:3 RPM

Voltage:12 Volts

Horsepower: 3 RPM

Product diameter: 40mm

Shaft diameter: 4mm

12V DC Gear Motor, Slow Speed 4mm Small Shaft Centre Electric Gearbox Motor 2-Wire Connecting

This 12V DC Gear Motor is perfect for all types of RC models and drones, from planes to quadcopters. The gear motor is perfect for the more advanced hobbyists, with its high torque and power, perfect for high-speed aircraft.  Gear Motor has a powerful gear mechanism that enables it to produce high torque with minimal noise. It is ideal for use in applications where a lot of force is needed, such as when used in a printing press. This is a small, slow-speed, gear motor that can be used for a variety of applications. It has a 2-wire connecting with 4mm shaft center, and it operates at 12V DC. This motor can be used to drive a variety of different applications, such as electric motors, generators, pumps, and more. It can also be used to power robots since it's able to move the wheels of the robot. They are designed for high-performance applications such as industrial gearboxes, pumps, and machine tools.

Features:-

Stable and reliable performance.

Good quality and Suitable to use.

Excellent quality and long service life.

Use for projects and industries.

[pondex-po]

Introducing the Artesian 2 Low RPM Pump!

Model: A2-1/8-30! 💦💪

This compact powerhouse packs a punch with its 1/8 HP motor, delivering a flow rate of 3060 gph and a maximum head of 12 ft. With its energy-efficient operation at 115 volts and 50/60 hz, it consumes a maximum of 134 watts. Complete with an 8 ft cord and 2" fittings, this pump is a reliable choice for smaller ponds.

Upgrade your pond's performance today! 🌿🌊

Buy Now 👉 https://lnkd.in/dJBGgrwz

[watchco]

What is the best power converter for an RV?

Are you planning to take your RV on a long road trip? If yes, then ensuring you have a reliable power source is important. The power converter is one of the most crucial components of an RV's electrical system. It converts AC power from the shore or generator into DC power to charge your batteries and run 12-volt rv battery devices in your vehicle. Choosing the right power converter for your RV can be overwhelming, especially with so many types available on the market. In this blog post, we'll guide you through everything you need to know about power converters and help you choose the best one for your mobile home!

What is a power converter?

A power converter is an essential component of an RV's electrical system. It converts AC power from a generator or shore into DC power to charge the batteries and run 12-volt devices in your vehicle.

 Without a power converter, you wouldn't be able to use any appliances requiring DC power, like lights, water pumps, or refrigerators. The converter takes the AC and turns it into DC by using diodes. 

The purpose of this conversion is to keep your batteries charged even when you're not connected to external sources of electricity. A good-quality converter will also have built-in protection against overcharging, which can damage or shorten the life of your batteries. 

Various types of converters are available on the market; some are designed for lead-acid battery systems, while others are specifically for lithium-ion setups. To choose the right one for your RV, consider factors such as battery type and size, expected usage patterns, and budget constraints.

How does a power converter work?

A power converter is an essential component of any RV's electrical system. It works by converting the 120-volt deep cycle rv battery AC power from a campground or generator into 12-volt DC power that can be used to charge your RV batteries and run your appliances. 

The process starts with AC power input, which typically comes in through a shore power cord connected to a campground pedestal or generator. The converter then uses a series of diodes and capacitors to convert this high-voltage AC power into lower-voltage DC power. 

Once the incoming AC has been converted to DC, it is regulated by the converter's built-in charger, which monitors the lithium rv battery banks' state of charge and adjusts charging output accordingly. This ensures that your deep-cycle RV battery bank receives optimal charging while preventing overcharging or undercharging. 

Once charged, the 12-volt DC electricity flows throughout your RV via its separate wiring system, powering lights, fans, furnace motors, and other low-power devices like cell phone chargers.

 Understanding how these components work together will help you choose the best type of converter for your particular needs, whether it’s a traditional unit or one of the newer lithium-compatible options available today!

What are the different types of power converters?

Power converters come in different types, each with its features and capabilities. The most common types include the single-stage converter, multi-stage converter, and inverter charger. 

A single-stage converter is the simplest type to convert AC power to DC power. It uses a transformer to step down the voltage from 120 volts to around 13–14 volts for charging RV batteries. 

Multi-stage converters are more advanced as they allow for efficient battery charging while protecting your battery against overcharging. They use sophisticated microprocessors that monitor your battery's condition and adjust the output accordingly. 

Inverter chargers convert DC power from your RV's batteries into usable AC power for running appliances or other devices. These chargers provide pure sine wave output, which is much better than modified sine wave inverters since it causes less wear on sensitive electronic equipment. 

Some newer models of power converters have started incorporating lithium-ion technology, which provides longer-lasting charge cycles compared to traditional lead-acid batteries. 

Understanding the different types of converters available will help you decide when to choose one that best suits your needs.

Which power converter is best for an RV?

When selecting the best power converter for your RV, there are a few things you need to consider. Firstly, you need to determine how much power your RV requires and what type of batteries it uses. This will help you choose between an inverter charger and a stand-alone converter. 

If you have a deep-cycle RV battery, a lithium RV battery might be the best option, as they have longer lifespans and better performance than traditional lead-acid batteries. Additionally, waterproof vans require converters that can withstand harsh weather conditions. 

For 24V battery systems, choosing the right converter is crucial because not all models support high voltages. Look for converters with smart charging capabilities that optimize energy usage by monitoring battery levels and adjusting the output accordingly. 

Ultimately, the best power converter for an RV depends on your specific needs and requirements. Research and consult with experts before making any purchases to ensure you get the most suitable product for your setup!

How to install a power converter in an RV

Installing a power converter in lithium batteries for rv is not as complicated as it may seem. However, it requires attention to detail and some basic electrical knowledge. Here are the steps to installing a power converter in your RV: 

Firstly, ensure that you have all the necessary tools for installation, such as screwdrivers, wire strippers, pliers, and crimpers. 

The next step is to locate the current converter in your RV and disconnect it by removing any wires or bolts connecting it. 

Before installing the new power converter, assess if any changes are needed to your wiring system. Remember that different models of converters may require specific wiring configurations. 

Once you have confirmed everything is set up correctly with your new converter, connect its wires to their respective terminals, ensuring they’re tightly secured with screws or bolts. 

Test out the system's functionality before hitting the road! 

If you’re uncomfortable doing this work, consider hiring a professional electrician who can help you through every stage safely and smoothly.

Conclusion

After considering all the aspects of power converters for RVs, it is clear that choosing the right one depends on your specific needs and requirements. If you plan to go off-grid frequently, a deep-cycle lithium battery with a high-capacity converter would be ideal. On the other hand, if you're using your RV mostly at campsites or parks with electrical hookups, a simpler converter might suffice. 

Regardless of which type of power converter you choose, install it by a professional electrician or an experienced RV mechanic. Safety should always come first when dealing with electricity in an enclosed space like an RV. 

Stay up-to-date with new technological advancements in this field since there are always better and more efficient models coming out every year. With proper research and installation procedures followed correctly, finding the perfect power converter for your RV will only enhance your overall experience while traveling on the road!

[nicoleman]

Check out this listing I just added to my Poshmark closet: Spectra Baby S2 Hospital Grade Double/single Breast Pump.

[victoria-werke-1953]

Fram broschyr 1953 (1) by Mats Peterson Via Flickr: FRAMOPED – Körkorts, Försäkrings och Skatte – FRI SPECIALBYGGD CYKEL med VICTORIA HJÄLPMOTOR 38 cc. 0,8 hkr. 2 växlar och frigång. Kedjedriven. Hel‐ och halvljus. Belysningsström från magneten. Enastående backtagningsförmåga. Driftsäker. Bensinsnål. Specifikation: Cykel: Specialbyggd. Extra kraftig, strömlinjeformad ram med 1 ⅛″ rör och 20 ½″ ramhöjd. Expanderande frambromsnav. Ballongringar. Extra förstärkt bakfälg samt grova ekrar och nipplar. Utrustning: Signalhorn, pump, lås, parkeringsstöd, reflexglas, rockskydd samt verktygsbox, innehållande erforderliga verktyg och instruktionsbok. Utstyrsel: Elegant mellanblå lackering med gråbeige dekor samt scotchlite å bakskärm och framgaffelbaljor. Blanka delar solitt förkromade. Belysning: IMPEX förkromad strålkastare med dubbla lampor samt koppling för såväl hel‐ och halvljus som noll‐läge. Ström från magneten. Vikt: Komplett cykel med motor 32 kg. Enbart motoraggregat 10,5 kg. Marschhastighet: 25 km/tim. Topphastighet: 30 km/tim. Bränsleförbrukning: c:a 0,15 lit./mil. Motor: VICTORIA SPECIAL, 1‐cyl., 2‐takt med tvåkanalsspolning. Plan kolv och avtagbart cylinderlock av lättmetall. Cylindervolym 38 cc. Cylinderdiam. 35 mm. Slaglängd 40 mm. Motoreffekt 0,8 hkr. Växellåda: Inbyggd i motorblocket och fylld med 2,5 cl. Arctic‐olja. 2 utväxlingar – 1:27,8 resp. 1:18,9 samt frikoppling. Manövreras med växelhandtag på styrstången. Tändning: NORIS svänghjulsmagnet med belysningsspole för 3 watt med 6 volts spänning. Förgasare: Flott��rlös VICTORIA specialförgasare med luftrenare. Regleras med vridgashandtag på styrstången. Kraftöverföring medelst kedja till bakhjulet. Bensintank: Monterad under specialbyggd packningshållare. Rymd 3 liter bensin‐oljeblandat bränsle. Ljuddämpare: Förkromad, effektiv, isärtagbar. Garanti: Cykel: 12 mån. från förs.‐dato. Motor: 6 mån. från förs.‐dato. Från mo-ped.se/moped/fram53.htm.

[diabolus1exmachina]

Hyundai N Vision 74 (prototype). 

Hydrogen fuel cell EVs aren't particularly sexy, or at least, they weren't. Say hello to the Hyundai N Vision 74 concept, a high-performance hydrogen fuel cell-powered EV meant to bridge EV power and performance with liquid fuel range. Hyundai's N high-performance sub-brand has been working on battery and fuel cell-powered performance prototypes for seven years now, and the project is beginning to bear some exciting fruit. The N Vision 74 aims to solve the biggest issue with high-performance EVs: the lack of range. The N people call it a "hydrogen hybrid."

Running flat-out, batteries don't last long. A previous all-electric prototype, the RM20e, only had 25 miles of range when driven on a racetrack, and while making the battery bigger would give it more range, it would also significantly increase the weight and hurts performance. Hyundai's solution: add a hydrogen fuel cell instead which combines compressed hydrogen from onboard tanks with oxygen in the atmosphere to create electricity and water, then use that electricity to power the electric motors. With just 4.2 kilograms of hydrogen onboard and a fully charged 62.4-kWh battery, Hyundai claims the N Vision 74 has a range of more than 373 miles when driven gently. It's bound to be much less when driven hard, as the dual rear electric motors suck down electrons to the tune of more than 580 hp and 664 lb-ft of torque. That's enough to give the sleek, angular coupe a top speed of over 155 mph and the ability to hit 60 mph in four seconds. The company is looking into adding a front motor in future prototypes which would reduce acceleration times even further. In addition to adding range, the fuel cell also reduces refueling time to just five minutes. The battery, meanwhile, is capable of charging at 800 volts, which should drop its charging time from 10 percent to 80 percent to under 18 minutes, based on production Hyundai EVs with similar battery technology. The fuel cell can pump out a maximum of 95 kW to help power the motors or recharge the battery.

The fuel cell itself is located under the hood, while a pair of hydrogen storage tanks are fitted in the trunk. A T-shaped battery fits behind and between the two seats, keeping the heaviest component in the center of the car for better weight distribution. Regardless of source, power is fed to a pair of motors on the rear axle, one driving each rear wheel. This allows the computer to perform torque vectoring in the same fashion as an electronically controlled limited slip differential, a trick the N engineers used to great success on the RM20e concept. Keeping the fuel cell, battery, and motors cool presents an enormous challenge, so the N Vision 74 features three separate cooling circuits serving each system separately. The goal is to have the car run a flat-out lap of the challenging Nürburgring Nordschleife without overheating and reducing power.

As cool as the numbers are, they're nothing compared to the car itself. Inspired by the Giorgetto Giugiaro-designed 1974 Hyundai Pony Coupe concept, the N Vision 74 looks like a restomod '70s supercar. We see a lot of Lancia 037 and DeLorean DMC-12 in the look, enhanced with massive side air intakes and an enormous rear wing, neither of which would look out of place on a modern Lamborghini. We love the turbine-style 20-inch front and 21-inch rear wheels, which have been wrapped in what must be the widest tires ever on a Hyundai, 295 width up front and 325 in the rear. The pixelated headlights from the Hyundai Ioniq 5 give it a real retro-futuristic look we can't help but love. The DeLorean bit is no accident. When Hyundai wasn't able to bring the Pony Coupe to market for a variety of reasons (lack of a proper engine, not to mention lacking general market awareness and acceptance), Giugiaro continued to refine the design and eventually sold the new version to DeLorean.

[autodepotnc]

The Best Grease Guns to Keep Your Equipment Running Smoothly

The Best Grease Guns to Keep Your Equipment Running Smoothly

 A dependable grease gun is important when you have any form of mechanical gadget that desires to be regularly lubricated. These Best Mini Grease Gun hand-held equipment are designed to preserve a widespread grease canister, and inject its contents immediately into the fittings of your machine the usage of a unique coupler. They may be manually powered—by using pumping a hand lever—or automatic, the use of battery packs or compressed air to dispense their grease. Although a few use a inflexible pipe to direct their grease, most use a bendy hose, permitting customers to move the coupler onto the fittings with one hand at the same time as holding the canister with the other.

What to Consider

The maximum vital query to invite your self whilst purchasing a grease gun is what form of strength supply goes to be nice for you. While manual models—which require you to pump a handle or lever to generate pressure—do require a few elbow grease to apply, they also can be more handy than automatic guns, in particular whilst you most effective have some fittings to paintings on. That stated, when you have loads of lubricating to do, computerized weapons which are powered by batteries or compressed air, will be a better in shape. Battery-powered weapons might be an particularly handy desire if you already personal some equipment from that unique emblem. This will can help you use your current battery packs, and buy a less expensive version of the gun that doesn’t consist of luxurious batteries.

Similarly, you need to consider the quantity of grease you’ll be going thru. While most grease weapons take trendy length grease cartridges, others like the G. Gun Grease Gun, use bulk grease to fill their 2-gallon canister, which makes them a lot extra beneficial for all and sundry who plans on going via plenty of grease. Or, in case you know you’ll only be using a small quantity of grease, like whilst you’re working to your bicycle or chainsaw, a smaller, compact gun could be plenty more handy.

Another factor to consider is the length of the hose that comes with your grease gun. Take the time to think about what exactly you’re going to be the usage of it on, and if you can, go out and measure how lengthy a hose would must be to efficaciously get right of entry to your fittings.

How We Selected

I've used a variety of grease weapons during my time as a part of a landscaping group at a massive state park, and used them frequently for keeping huge mowers, tractors, and other heavy device. I used this arms-on experience, similarly to on-line research and consumer remarks, to put together this list of the great grease weapons you can purchase. I did my high-quality to encompass various charges, styles, and sizes, so whether you have got a couple of machines that want frequent lubrication, or a small mower that desires occasional preservation, you must locate an alternative here that works for you.

Milwaukee Cordless Lithium-Ion Grease Gun

This cordless Milwaukee gun permits you to quickly and easily dispense grease, way to a 12-volt motor that creates eight,000 PSI running pressure. The M12 battery percent is interchangeable with every other M12 tools, and is robust sufficient to process seven grease cartridges earlier than it needs a recharge.

Also, via designing the frame with a hose storage clip, this feature is less likely to accidentally get grease in your clothes or something else you’d choose to hold clean. While this 7.2-pound weight is lightweight for a battery-powered model, it's far a chunk heavier than the guide alternatives on our list, so keep that during mind.

•             Easy to apply

•             Long-lasting battery

•             Expensive

•             Less convenient to shop than guide guns

 LockNLube Lever Grip Grease Gun

Our favourite characteristic of this LockNLube version is the reality that its coupler attaches to the unit itself, which maintains it smooth and guarded while now not in use, and additionally allows you to apply the hose as a handy sporting deal with. You can also rotate this coupler as you figure, which is clearly available for whilst you need to get entry to hard-toreach fittings, rather of getting to twist and maneuver the whole gun itself.

This gun additionally comes with a further seal kit, so that if the present one ever wears out or has any issues, you may replace it right away.

•             Sturdy production

•             Convenient grease coupler

•             More costly than most manual weapons

[dhfindia]

The power pack consists of a reservoir for storing hydraulic fluid, a pump that pressurizes the fluid, and a control valve that regulates the flow of fluid to the hydraulic cylinder or motor.

The 12V DC motor is typically powered by a battery, making the power pack portable and easy to use in remote or mobile applications. The power pack can be used to operate a wide range of hydraulic equipment, including jacks, lifts, and other tools.

One of the main advantages of a 12V DC hydraulic power pack is its compact size and portability, which makes it ideal for use in applications where space is limited or where mobility is required. Additionally, the use of a 12-volt DC motor allows the power pack to be powered by a battery, which can be charged using solar panels or other renewable energy sources, making it a sustainable option.

Maintenance and Troubleshooting Tips

Proper maintenance and troubleshooting are important aspects of keeping your 12V DC hydraulic power pack running smoothly and efficiently. Here are some tips to help you maintain your power pack and troubleshoot any issues that may arise:

Keep it clean: Regularly clean the exterior of the power pack to prevent dirt, debris, and other contaminants from entering the system.

[jualpommini]

Daftar Harga Pom Mini

Nilai jual Pom Mini Dua Nozzle mode terkini Rp.12.lima juta, detail mesin harga Pertamini digital 2 Nozzle terlaku tahun 2021 dengan rakitan spesifikasi flow standard dengan pompa setripugal 125W atau perputaran mekanisme saluran bensin atau pompa rotax. Garansi mesin enam bulan dengan service servis center 24 jam siap layani konsumen. Ketidaksamaan pada pasaran nilai jual membeli di antara mesin pompa bensin mini drum portable dengan drum tanam sekitaran Rp. 500rb per nozzle karena lebih hemat pelat besi dalam pembikinan ukuran kerangka kesing. Disamping itu harga jual pom mini digital Rp.12jutaan itu benar-benar bergantung wilayah tempat dikirimkan mesin itu ingat fasilitas transportasi sampai ke arah membutuhkan ongkos hingga harga unit mesin pom mini plus tambahan ongkos ongkos kirim.

Sering dicari konsumen di bengkel produksi pom mini salah satunya harga Pertamini 2 nozzle paling murah best seller terlaris diminta ialah mode mesin type portable dengan kemampuan drum kaleng 420 liter. Perlu kami berikan juga jika pemasaran unit mesin pom mini belum terhitung ongkos biaya pengangkutan dan seting penempatan sampai tempat penempatan mesin. Bandrol harga pom mini Rp.12 juta-an ini untuk mesin pertamini OTR (On The Road) tempat produksi pada agen sah showroom kami yang beralamat pusat di Jawa Barat.

Sekarang ini mesin Pom Mini mode terkini tahun 2021 Pertamini Digital banyak disukai karena ringkas performa mesinnya seperti mesin fuel dispenser yang berada di SPBU sah Pertamina. Opsi harga pom mini Rp.12 juta-an ini ada banyak variasi yakni mesin Pertamini digital ada yang alokasi untuk 2 produk dengan 2 selang nozzle untuk bensin premium / pertalite / Pertamax dan ada pula yang cuman 1 nozzle untuk bensin atau solar saja. Disamping itu ada pula pom mini 3 nozzle, dan mode drum tempat penampungan bbm ada mode portable ada pula yang tanam.

Pertanyaan beberapa orang yang cari barang mesin fuel dispenser berkenaan, Berapakah harga pom mini? itu kami jabarkan jawabnya pada tulisan berikut ini : Harga Pom Mini 2 Nozzle bedasarkan detail mesin Harga Pom Mini 2 Nozzle Kesing minimalis spesifikasi standard Rp.11.lima juta (kustom) made by order Harga Pom Mini 2 Nozzle Spesifikasi Flow Sensor Serangkaian Pompa Standard Rp. 12 Juta Harga Pom Mini 2 Nozzle Spesifikasi Flow Sensor Pompa Perputaran Rp. 13 juta Harga Pom Mini 2 Nozzle Spesifikasi Assymeter Pompa Sentripugal Rp. 28 juta Harga Pom Mini 2 Nozzle Spesifikasi Assymeter Pompa Gear Pump Rp. 50 juta Order pemesanan kontak contact fast respont berikut ini Sales Pemasaran Unit Mesin Pom Mini Digital :

Mode pom mini terkini tahun 2021 :

Harga jual pom mini 2 nozzle spesifikasi flow mtr. Rp.12.lima juta.

Video check kelengkapan barang dan aksesori mesin pom mini digital :

Gambar mode photo mesin pom mini 2 nozzle mode tahun 2019 :

Keunikan mode mesin pom mini 2 nozzle produk tahun 2020 :

Polet Cat kerangka kesing ciri khas terkini Panel depan dan belakang gunakan kunci. Roda mesin warna merah yang tahan memuat beban 420 liter. Ada feature panel emergensi setop.

Tabel Daftar Daftar Harga Jual Pom Mini Paling murah 2020 Tipe / Mode Tanam 120 liter Portable 210 liter Harga Pom Mini 1 Nozzle Rp 6.5 Juta Rp 7.5 Juta Harga Pom Mini 2 Nozzle Rp 10.5 Juta Rp 12 Juta Harga Pom Mini 3 Nozzle Rp 15 Juta Rp 16.5 Juta

Keterangan Hak Konsumen saat berpartner dengan Citra kreasi Tehnik :

Instalasi electrical CPU modul pom mini rakitan asli orisinal Citra Kreasi Bertanggung-jawab atas garansi elektrical enam bulan Harga pom mini itu telah terhitung biaya pengangkutan khusus daerah Priangan Timur Pembelian 2 unit lebih mendapatkan potongan harga harga

Dasar harga pom mini 2 nozzle up-date terkini ini kualitas standard Citra Kreasi dengan tipe mode tipe dan serangkaian pompa perputaran. Unit mesin pada harga di atas termasuk termurah dan best seller diminta dan sudah dikirimkan ke beragam penjuru wilayah di Indonesia. Mesin pom mini pertamini kerangka minimalis dua noozle dengan alat ukur flow sensor di pasar nilai jual paling murah 12. juta-an rupiah. Unit mesin itu dibikin dengan mode portable di mana drum tempat penampungan bahan bakar dipasang didalamnya. Gambar contoh mode pom mini ini ialah seperti berikut :

Mode design pom mini kerangka terlaku sekarang ini cat warna merah dan hijau dengan tinggi cashing 1.7 m. Kesing penampilan pertamini digital ini terlaris di pasar jadi produk pom mini best seller pada harga yang paling dapat dijangkau Rp. 12.5 Juta-an Tempat Jawa Barat dan Jawa tengah telah terhitung ongkos pengangkutan, training operator, seting dan bayar pada tempat. Keterangan komplet bisa disaksikan pada rincian mengenai daftar harga pom mini paling murah sampai ke arah semua kota kabupaten Propinsi di Indonesia.

Mode gambar unit mesin pom mini terkini terlaku pada tahun 2019 Harga Mesin Pom Mini 2 Nozzle Rp. 12.500.000

Detail : Kerangka mesin portable Pelat besi : 1,1 mili, tinggi 1,8 mtr., lebar depan 1.3 mtr., panjang belakang drum portable 85 cm. Panel cashing : Press mesin bending Mode : Portable dapat dipindahkan-pindah 4 roda Drum : Disimpan di dalam rencana cashing masing-masing noozel 210 liter Modul CPU : Elektrik Pertamini versus terkini display fragmen Selang : Ikatan mesin press swivel panjang 4 mtr. Noozle : standard impor tipe 11 A Automatic Garansi : enam bulan Kualitas : Bisa lolos tes terra mtr. lewat Quality Kontrol finising Harga babderol dapat berbeda sama sesuai ongkos fasilitas mekanik pengangkutan Catatan : Pembayaran dilaksanakan sesudah proses penempatan pada tempat pemesan. Harga jual pom mini digital itu telah terhitung biaya kirim daerah Priangan timur Jawa Barat dan beberapa Jawa tengah.

Catatan : Tanyakan dulu dengan masak saat sebelum lakukan transaksi bisnis. Kami bukan hanya ingin sekadar jual mesin, tapi sang pemilik mesin cepat memperoleh omset dari mesin itu. Mode Pom Mini 2 Nozzle Terbanyak diminta Koleksi galeri photo unit mesin pom mini digital terkini dan terlaku banyak diminta. Mode Pom Mini 2 Nozzle Best seller product fuel dispenser Pom Mini 2 Nozzle Instalasi bawah sisi pompa bensin kelihatan sama dalam photo gambar di atas. Kerangka kesing portable dengan drum besi masing-masing kemampuan 210 liter.

Dokumentasi Galeri photo mesin pom mini digital 2 nozzle yang sekarang ini tidak dibuat kembali karena pengurangan kebutuhan pasar karena mode telah kuno. Mode design kerangka cashing pom mini usang. Mode pom mini dua noozle design terkini warna merah mode usang tahun 2018. Design kerangka cashing pom mini 2 nozzle mode kerangka lama tahun 2015 yang saat saat ini tidak dibuat kembali. Harga Pom Mini 2 Nozzle Spesifikasi Asymeter Produksi lain dari agen pemasaran pom mini jual barang berbentuk mesin pom mini pertamini 2 nozzle mode standard. Nilai jual paket pom mini rakitan standard SPBU alat ukur Assymeter E flow mtr. dipasarkan dengan bandrol Rp.30jt. Ke-2 opsi itu telah terhitung garansi kerusakan, drum tempat penampungan, Alat pemadam kebakaran, ongkos pasang, diskusi tehnis tutorial, dan seting digital elektrik. PEMBAYARAN dilaksanakan SETELAH UNIT TERPASANG di lokasi untuk pemesan di daerah Jawa Barat, Bandung, Propinsi Jawa tengah, Jakarta, Kota Bogor, Depok, Cianjur, Sukabumi, Tangerang, Tasikmalaya, Kuningan, Sumedang, Pati, Kabupaten Cilacap, Ciamis, Semarang, atau di dua propinsi itu.

Seperti unit pada harga mesin pertamini 1 nozzle ongkos itu bisa didiskusikan dengan diskusi dan servis lewat nomor contact kantor marketing Citra Kreasi Tehnik. Sepanjang jam kerja operasional team kami bekerja professional yang terbagi dalam mekanik mesin, operator, cs, management perakitan dan sisi keuangan.

Di atas sebagai gambar mode pom mini digital cashing mesin pertamini 2 nozzle terkini mode tipe tanam. Gambar photo itu kerangka lama yang sekarang jadi masa lalu diproduksi perakitan Pom Mini Citra Kreasi dulu. Adapun detail bisa disaksikan di bawah gambar mode mesin pom mini 2 nozzle dengan batang nozzle 2 Nozzle polet warna merah, hitam, putih dan gabungan biru. Mode terkini mesin pom mini 2 nozzle Contoh mode atap pom mini 2 nozzle ukuran dimensi 3 x 3 mtr. Ada penempatan dengan paket atap sama dalam contoh mode pom mini 2 nozzle di atas Detail mesin pom mini rakitan 2 nozzle digital ialah seperti berikut :

Penampilan bodi mesin dibikin dari pelat besi memiliki ukuran minimum 1,1 mm Display harga digital dan noozle 2 biji warna merah untuk premium dan biru untuk pertamax Alat ukur memakai flow sensor berbentuk AICHI mode : OF05ZAT baru. Atau flow mtr. impor Jepang alat ukur khusus mesin pom digunakan untuk bensin. Mesin sedot ber daya listrik 120watt saat bekerja. Ukuran dimensi 120 cm x 80cm x 180 cm. CPU mesin 12 volt 220 Ampere Nozzle tipe 11A Automatic Selang warna hitam panjang 4 mtr. barang impor dari Italy Dapat ditambahkan dengan alat inverter DC to AC khusus untuk wilayah yang kerap mati listrik PLN bisa memakai Aki atau Accu motor.

Itu keterangan ringkas berkenaan harga pom bensin mini pertamini 2 nozzle dan deskripsi detail barang up-date mode terkini tahun 2019. Sedang buat anda yang di luar kota Jawa Barat seperti Bengkulu, Medan, Batam, Jambi, Kalimantan, Sulawesi, Pontianak, Pangandaran, Cilacap, Bali, Purwokerto, Semarang, Surabaya, dan kabupaten propinsi yang lain, biaya pengangkutan dan proses pembayaran bisa didiskusikan lewat contact telephone / SMS / watsapp yang tercantum di website pemasaran pom mini digital ini.

Untuk anda yang tertarik jadi distributor cabang bisa mengontak kami dan merajut kerja sama dengan persetujuan 2 sebelah pihak. Potongan harga harga pom mini khusus untuk mesin pertamini dan diskon jika sudah jadi agen cabang di kota anda. Kesempatan usaha lain khusus yang di luar pulau jawa jadi perakit mesin pom mini digital dan kami jadi suplier sparepart mesin mulai dari CPU computer, selang, noozle sampai bahan elemen yang lain yang dibutuhkan.

[victoria-werke-1953]

Fram broschyr 1953 (2) by Mats Peterson Via Flickr: FRAMOPED – Körkorts, Försäkrings och Skatte – FRI SPECIALBYGGD CYKEL med VICTORIA HJÄLPMOTOR 38 cc. 0,8 hkr. 2 växlar och frigång. Kedjedriven. Hel‐ och halvljus. Belysningsström från magneten. Enastående backtagningsförmåga. Driftsäker. Bensinsnål. Specifikation: Cykel: Specialbyggd. Extra kraftig, strömlinjeformad ram med 1 ⅛″ rör och 20 ½″ ramhöjd. Expanderande frambromsnav. Ballongringar. Extra förstärkt bakfälg samt grova ekrar och nipplar. Utrustning: Signalhorn, pump, lås, parkeringsstöd, reflexglas, rockskydd samt verktygsbox, innehållande erforderliga verktyg och instruktionsbok. Utstyrsel: Elegant mellanblå lackering med gråbeige dekor samt scotchlite å bakskärm och framgaffelbaljor. Blanka delar solitt förkromade. Belysning: IMPEX förkromad strålkastare med dubbla lampor samt koppling för såväl hel‐ och halvljus som noll‐läge. Ström från magneten. Vikt: Komplett cykel med motor 32 kg. Enbart motoraggregat 10,5 kg. Marschhastighet: 25 km/tim. Topphastighet: 30 km/tim. Bränsleförbrukning: c:a 0,15 lit./mil. Motor: VICTORIA SPECIAL, 1‐cyl., 2‐takt med tvåkanalsspolning. Plan kolv och avtagbart cylinderlock av lättmetall. Cylindervolym 38 cc. Cylinderdiam. 35 mm. Slaglängd 40 mm. Motoreffekt 0,8 hkr. Växellåda: Inbyggd i motorblocket och fylld med 2,5 cl. Arctic‐olja. 2 utväxlingar – 1:27,8 resp. 1:18,9 samt frikoppling. Manövreras med växelhandtag på styrstången. Tändning: NORIS svänghjulsmagnet med belysningsspole för 3 watt med 6 volts spänning. Förgasare: Flottörlös VICTORIA specialförgasare med luftrenare. Regleras med vridgashandtag på styrstången. Kraftöverföring medelst kedja till bakhjulet. Bensintank: Monterad under specialbyggd packningshållare. Rymd 3 liter bensin‐oljeblandat bränsle. Ljuddämpare: Förkromad, effektiv, isärtagbar. Garanti: Cykel: 12 mån. från förs.‐dato. Motor: 6 mån. från förs.‐dato. Från mo-ped.se/moped/fram53.htm.

[sciencenewsforstudents]

The coronavirus pandemic has left large numbers of people gasping for air. Many patients with COVID-19 wind up needing extra oxygen. Sometimes they even need to be put on machines that breathe for them. But shortages of these ventilators have developed as the number of patients has grown. That has inspired researchers to explore new low-cost ideas to help these patients breathe more easily.

Their work might help both big-city hospitals and medical centers in remote parts of the world. And what they are engineering could help patients long after the pandemic ends.

Explainer: What is a coronavirus?

Shannon Yee is a mechanical engineer. He works at the Georgia Institute of Technology in Atlanta. After hearing of shortages, he recalls, his team asked: “How can we design a low-cost ventilator that can be made globally?” His team and colleagues in England looked at how these machines are used. And they thought about which of their parts might be available nearly anywhere in the world.

“You have to start from the perspective of the person who needs it,” says Kyle Azevedo. He works at the Georgia Tech Research Institute. The team’s goal, he says, has been to figure out “what is essential” to meet someone’s needs. In some cases, a device might not need all the fancy controls that are standard on U.S. ventilators.

Most ambulance crews use hand-operated bags when patients can’t breathe. They’re called ambu bags. A machine could be added to squeeze them, Yee’s team reasoned. And unlike a person, it could work nonstop for days.

The simple motor and mechanical system that Yee’s team designed inflates and squeezes the bags. A plug-in power adapter or standard 12-volt battery runs it. Add separate tubing and volume controls and this device can breathe for two patients at once. Filters in the tubing keep each patient’s exhaled air from infecting others. And the system can hook up to an oxygen supply. Kits can be packaged flat for shipping, Yee says.

“The ambu bag pump system would be great,” says Anne Safrath. She’s a nurse in Merrick, N.Y., who has worked in emergency rooms. This project, she says, “saves a pair of hands that could be doing something else.”