#(V) axial hole

[totally-a-cis-girl]

vessel

[rpmtrish]

The challenge is to create a closure mechanism used in high-temp, high-pressure, and/or mechanical applications in joining ducting and tubing. Enter the V-Band or Marman Ring Clamp. An added feature is the substantial savings in assembly and maintenance costs when the connection requires frequent disassembly and re-assembly. With only one or maybe two bolts to fasten, the V-Band Clamp compared to bolted flanges, or welded joints is less costly to manufacture and easier to assemble. When limited in access the V-Band Clamp is extremely valuable. The coupling latch can be oriented at any convenient point for access. Unlike bolted flanges, the real magic comes with the uniform closing force around the circumference of the flanges. There are many benefits to using a V-Band Clamp, besides the savings in assembly as mentioning earlier. The use of a V-Band Clamp offers a more efficient joint, 360° positioning of the latch, reduces weight, an elimination of radial orientation of bolt holes during assembly and they are aesthetically pleasing. In a previous article we uncovered the wild history of the V-Band Clamp from the Marman Products Company in 1941 by founder Herbert “Zeppo” Marx. Today we dive deep into how the V-Band Clamp works. When torque is applied to the coupling nut, a radial (inward) force is created in the V-Retainer. The radial load created by the band tension is then transmitted as an axial load on the mating flanges due to the wedging action of the V-Retainer. The retainer Apex Gap and foot clearances are typically .062”. This clearance must be maintained to prevent the V-Retainer from bottoming out on the flanges before the required loading has been achieved. The flange angle can vary between 30°-90° with an accepted industry standard for an included angle as 40°. This angle provides the optimum strength for drawing together a set of flanges and maintaining a tight seal. Using a 40° angle the retainer exerts an axial load on the flanges with an 8.6 to 1 mechanical advantage as the outside band is tightened. It is necessary to overcome friction during tightening of the V-Retainer, once tightened, friction helps reduce the bolt load required to keep the flanges from separating. You may notice a difference between the V-Band Clamp drawing above and the photo of the clamps we offer (photo below). Our clamps have a quick-release mechanism to make them easier to release and engage for a quick change in the pits. Retainer Segments V-Band Clamps can be made using a single retainer segment or multiple retainer segments. More segments add flexibility to aid in installation of the coupling over the flanges. A single-segment clamp is lightweight and relatively economical. Due to the stiffness of the continuous ring, single-segment couplings are typically available only in larger diameters and for infrequent removal/re-installation. Two-segment clamps provide greater flexibility for ease of installation and removal. They are used on larger diameters. Two segment couplings can be provided with two latches or with strap loops. Three-segment clamps offer more flexibility for removal and installation and can be used for large and small diameters; it is most useful and economical segment design configuration. Four-segment clamps are used in large diameter applications where two- or three-segment couplings are not adequate. Four-segment couplings can be used with multiple latches and must be used with a full band. Interesting to learn that this technologically superior clamping mechanism was developed in the first half of the 20th century and has been such a valuable tool for a variety of industries. For more details on the things, we see everyday in the garage be sure to subscribe to our weekly newsletter and our YouTube Channel. Copyright Burns Stainless - Vincent Roman     Read the full article

[hansmotiondrive]

HMHG Series Harmonic Drive Hat Type

The flexspline belongs to hollow flanging standard structure, compact design, zero backlashes, coaxial output and input, excellent positioning accuracy, and rotation accuracy.

HMHG Series Harmonic Drive Hat Type List

HMHG-Ⅰ Series Unit (Hollow Shaft) Harmonic Drive

With compact hollow shaft and a robust cross roller bearing which enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. Light weight is very important for some applications, HMHG-I-LW is available for lightweight solution. HMHG-I is available in 6 size with ratios from 50:1 to 160:1.

HMHG-Ⅱ Simple Unit (Flat) Series Harmonic Drive

Input shaft connects with an inner hole of wave generator through Oldham coupling, flat shape, and standard structure

HMHG-Ⅱ-E Simple Unit (Flat & Integral Cam) Series Harmonic Drive

Compared with HMCG-II, wave generator with integrated cam for HMCG-II-E. The integrated output cross roller bearing with high titling capacity enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. The absence of input and output flanges features a fabulous flexible design. HMHG-II is available in 6 size with ratios from 50:1 to 160:1.

HMHG-Ⅲ Simple Unit Flat Hollow Shaft Series Harmonic Drive

High torque simplicity series with a hollow input shaft, the absence of input and output flanges features a fabulous flexible design. HMHG-III is available in 6 size with ratios from 50:1 to 160:1.

HMHS-IV Unit (Shaft Input) Series Harmonic Drive

The integrated output cross roller bearing with high titling capacity enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. Fully sealed and easy to mount to motor. Performs fantasy on bevel gears and synchronous belt device applications.

HMHG-V Unit (Hollow & Long Shaft) Series Harmonic Drive

With input shaft can mount to motor directly. Low speed hollow shaft through supply lines, shafts or cables. Encoder can be mounted to both input and output shaft. Especially for Cobots and the device with joint modular.

Design Guide Of HMCG Series Harmonic Drive Cup Type

In Order To Give Full Play To The Performance Of Harmonic Reducer, Please Pay Attention To The Follo

Make the input shaft, circular spline, output shaft, and shell concentric.

Wave generators can produce axial force. Please make the input shaft into some structure that can support the force.

Since the harmonic reducer is a small device that can transmit larger torque, please adopt suitable tightening torque to tighten the screw that connects the flex spline with the output shaft.

Flexspilne can have elastic deformation, so please adopt the recommended size to design the inner wall of the shell.

Input shaft and output shaft must adopt matched bearings (leave space for 2 - point support) and the structure that can bear radial load and axial load. Please do not exert too much force on the wave generator and flex spline.

Make sure the flange diameter of the flex spline does not exceed the wheel bore diameter of the flex spline and process fillet on the flange that connects the diaphragm. Please adopt the recommended size to design all parts.

[fahcandall]

Fictober 1 (FAHC)

Prompts:

Fictober 1: "No, come back!"

AH Promptober 1: Rage

Fandom: Roosterteeth/Achievement Hunter (FAHC)

Characters: Fiona Nova, Geoff Ramsey, Michael Jones, Jeremy Dooley, Ryan Haywood 

Rating: Mature

Warnings: mature language, injury, guns, violence, unnamed character deaths

I'm planning on using the Fictober prompts, but I like the idea of the AH Promptober ones as well, so as much as possible I'm going to see if I can combine them into one story each day and just see how this goes.

"Vagabond! Rimmy Tim! Come in goddamn it!" Michael and Fiona both held their breath as Geoff shouted into the coms. A few long moments later Jeremy's voice came back over the com. 

"We're out, Kingpin, we're out." Geoff, Michael and Fiona all let out sighs of relief. "But V's hit." Jeremy continued. 

"I'm fine." Ryan immediately cut in.

"No, you're not. Shut up."

"Rimmy, can you get to a safehouse?" 

"We're fairly close to...oh shit." Jeremy cut himself off. 

"What?" Geoff barked. Fiona was reminded how much she didn't like sitting out of view of the action, on coms. She'd much rather leave their cover and go help her crewmates.

"They've surrounded us. V can't shoot with a hole in his side." 

"I said-" Ryan tried to talk again, but once again was cut off by Jeremy.

"You dropped your gun, shut up and keep pressure on that. I'm gonna try to hold them off, maybe I can get an opening and drive us out." Jeremy stopped talking and Geoff put his head in his hands.

"Well, what are we fucking waiting for?" Fiona asked when Geoff didn't start to drive immediately. "Geoff, let's go."

"Coms are on, use codenames." Geoff said back, almost robotically. They could hear the background of gunshots from Jeremy and Ryan's coms. 

"Is that important right now?" Fiona said, frustrated. They were just sitting here, while Jeremy and Ryan were being shot at, they had to go.

"Do you have a plan, Supernova? Some-fucking-thing so that we don't end up dead as soon as we leave this spot?" Geoff asked. "They're fucking swarming out there. No backup, no plan, low on ammo. Fuck. This is why I stopped going out, then I don't have to know about the plan going to shit until after it's dealt with." 

"When have the Fakes ever waited for any of that?" Fiona scoffed. "And isn't it your job to come up with the plans? Don't expect that from us."

"I mean, she's not wrong." Michael said, but still Geoff didn't move. 

"You can't fucking sit here and just be okay with letting them get trapped! I'm not going to sit here!" Fiona grabbed her gun and checked the clip as she slid toward the door.

"You got a plan Kingpin? Or am I going with Supernova's?" Michael asked, reaching for the bag of ammo at his feet. 

"If we go out there we're going to get killed."

"And if we don't they will!" Fiona said. She popped her door and slid out. "Are you coming, Mogar?" Michael tossed one more look at Geoff before also hopping out.

"Yeah."

"No, come back! Get back in the car." Geoff turned the key and with a look at each other, Michael and Fiona got back in. "You two better be ready to use those guns."

"Hell yeah Kingpin. Have you met us?" Michael asked with a grin, as Geoff took off down the street.

"Hey Mogar, let's fucking rage." Fiona said with a grin as she leaned out the window and started shooting. Michael joined her, laughing, and Geoff just groaned. 

"This is why I stopped going out." Geoff grumbled to himself. "Rimmy, Vagabond, you heard that?"

"Yeah." Jeremy grunted. "I won't aim for you." 

For all Geoff's complaining, Fiona and Michael did know how to really lay down the damage, they were struggling but not dead yet when Jeremy next spoke. 

"You guys have taken a bunch of them off us, they seem to think you’re the bigger threat. Which, I’m really okay with right now. I'm gonna try and drive out." There was the roar of an engine and Jeremy's whoop as he presumably got out of the corner they'd been in. 

"Shit. Hey, Mogar, how's that ammo bag you've got looking?" Fiona asked. 

"Don't tell me you're out?" Michael shouted back at her.

"Last clip." 

"Fuck. Hey Kingpin…"

"I'm going as fast as I can, are you completely out?" Geoff asked, swerving wide around a car trying to box them in and turning down a side street. 

"Uh, Kingpin, we've got sirens." Fiona said.

"Can you tell where they're-" Geoff cut himself off as they swung onto another road to see a block in front of them. "Well shit." He pulled the car to a stop.

"Hey Kingpin, I uh, found the sirens." Fiona said and Michael couldn't stop a short laugh.

"Yeah, yeah you did." Geoff sighed. "Maybe this was why I stopped going on heists."

"Hey," Michael said as they set their empty guns down and put their hands up. "At least the Lead Men won't shoot us now."

"And, Rimmy and Vagabond got away." Fiona added.

"Well, aren't you two just full of good news now." Geoff grumbled. "Rimmy when you get the chance, get Axial to completely shut down these coms. I doubt he’s getting them back." Geoff didn't wait for a response, before clicking off his com, and glancing at Michael and Fiona. "Turn your coms off."

[a-dinosaur-a-day]

Rajasaurus narmadensis

By Ripley Cook 

Etymology: King Reptile

First Described By: Wilson et al., 2003

Classification: Dinosauromorpha, Dinosauriformes, Dracohors, Dinosauria, Saurischia, Eusaurischia, Theropoda, Neotheropoda, Averostra, Ceratosauria, Neoceratosauria, Abelisauroidea, Abelisauridae, Majungasaurinae

Status: Extinct

Time and Place: Between 70 and 66 million years ago, in the Maastrichtian of the Late Cretaceous 

Rajasaurus is known from the Lameta Formation of Gujarat, India 

Physical Description: Rajasaurus was an Abelisaur - so, a kind of theropod with a long body, almost nonexistent arms, and thick, powerful legs. Rajasaurus in particular differed from other Abelisaurs in having particularly short legs, making it even more… sausage-like… in appearance than even its close relatives. It had a boxy head and thick neck, which would allow it to have a very powerful bite and strength in the neck to hold down prey. It had a strong sense of smell, as well, to help it to find prey from farther away - allowing it to set up an ambush for said prey when it got too close. It had horns on its forehead, made of bone from the nose, which was probably not extended by skin. It was also a lot shorter than other Abelisaurids - which means that it was only about 7 or so meters long, and maybe only two meters tall, if that. It really wouldn’t have stood much taller than an adult man. Rajasaurus had an especially short neck, which may have allowed it to grab onto prey even tighter than other Abelisaurids. It had very short, four-fingered hands, with claws on the first three of them. Though the legs of Rajasaurus are short, it did have very robust, thick toes, giving it more support on the ground. As an Abelisaurid, Rajasaurus was covered in scales all over its body, with potentially round bumpy bits of bone (osteoderms) interspersed among the scales. 

By Paleocolour, CC BY-SA 3.0 

Diet: As a large Abelisaurid, Rajasaurus would have primarily fed upon larger herbivores, such as Titanosaurs.

Behavior: Abelisaurs were not the fastest animals - after all, if they ran too quicky, they wouldn’t have been very balanced - but what they were extremely agile turners. Being able to turn very quickly allowed them to be efficient ambush predators. Rajasaurus would have waited for prey to appear, and then charged - seemingly out of nowhere, by turning rapidly towards the prey - and then grabbing down onto the struggling prey with its strong, boxy jaws. Though Rajasaurus had small arms and hands, it traded those off for having a stronger neck - to better hold the prey steady with. Then, the stress would weaken the animal, along with blood loss. The horns on the head of Rajasaurus were probably for display and interaction between members of the species, with fights occurring to argue over carcasses or for mates via head-butting or neck-bashing. The horns would have also packed quite a bit of a cutting edge in these fights. It’s also possible that bright colors could have been used on the horns to display. While it doesn’t seem likely that Rajasaurus was particularly social, it did probably take care of its young, and may have formed small family groups while they grew up, in order to protect the young from the many other predators around. 

By ДиБгд, CC BY-SA 3.0 

Ecosystem: The Lameta Formation is a fascinating Late Cretaceous environment due to the fact that it was a grassland! Grasses evolved sometime in the Cretaceous period. While they did not spread rapidly until the Cenozoic, they did seem to be present in quite a few areas during the Cretaceous (to the point of some hadrosaur relatives evolving to eat them). India at the time was an isolated island, so grasses were able to thrive and diversify more there than in other locations where they did not gain as immediate of a foothold. There was a large amount of volcanic activity nearby, which probably added to its extensive biodiversity (before it made many of the animals present go extinct, via the explosion of the Deccan Traps). It was a lush environment filled with grasses resembling modern rice, flowers, algae, and ferns. This was an environment filled with many lakes, surrounded by extensive mud that lead to its fossil preservation. Rajasaurus was certainly not the only dinosaur of this environment, either! There were even other Abelisaurids - Indosaurus, Indosuchus, Rahiolisaurus, Lametasaurus, and their close relatives the (potentially piscivorous) Noasaurids such as Ornithomimoides, Laevisuchus, and Dryptosauroides. There were also other theropods, probably also Ceratosaurs - Jubbulpuria, Coeluroides, and Orthogoniosaurus. With all of these predators and fishermen, it makes sense that there were a lot of large herbivores for them to feed upon! And there seem to be at least three different kinds of titanosaurs there - Titanosaurus, a dubiously known one; Jainosaurus, a slightly better known one; and Isisaurus, the best known one that seems to be one of the main features of the environment. There was also potentially an ankylosaur - Brachypodosaurus! As for non-dinosaurs, there were large snakes, Sanajeh and Madtsoia; a variety of turtles; and some Dyrosaurid crocodylomorphs! 

By José Carlos Cortés 

Other: Rajasaurus was one of the Majungasaurines, which had longer holes in their snouts in front of their eyes than their close relatives the Carnotaurines - aka, they had lighter skulls - and having small crests widening the front of their heads; and, in general, longer snouts. This group of Abelisuarids underwent extensive island hopping, reaching places like India via rafting and other journeys across the ocean. Rajasaurus, being one of them, had ancestors that underwent such a journey!

~ By Meig Dickson

Sources Under the Cut 

Brookfield, M. E.; Sanhi, A. (1987). "Palaeoenvironments of the Lameta beds (late Cretaceous) at Jabalpur, Madhya Pradesh, India: Soils and biotas of a semi-arid alluvial plain". Cretaceous Research. 8 (1): 1–14.

Carrano, M. T.; Sampson, S. D. (2008). "The phylogeny of Ceratosauria" (PDF). Journal of Systematic Palaeontology. 6 (2): 183–236.

Cau, A., F. M. Dalla Vecchia, and M. Fabbri. 2012. Evidence of a new carcharodontosaurid from the Upper Cretaceous of Morocco. Acta Palaeontologica Polonica 57(3):661-665

Delcourt, R. (2018). "Ceratosaur Palaeobiology: New Insights on Evolution and Ecology of the Southern Rulers". Scientific Reports. 8 (9730).

Filippi, L. S., A. H. Méndez, R. D. Juárez Valieri and A. C. Garrido. 2016. A new brachyrostran with hypertrophied axial structures reveals an unexpected radiation of latest Cretaceous abelisaurids. Cretaceous Research 60:209-219

Furtado, M. R., C. R. A. Candeiro, and L. P. Bergqvist. 2013. Teeth of Abelisauridae and Carcharodontosauridae cf. (Theropoda, Dinosauria) from the Campanian- Maastrichtian Presidente Prudente Formation (southwestern São Paulo State, Brazil). Estudios Geológicos 69(1):105-114

Gianechini, F. A., S. Apestteguia, W. Landini, F. Finotti, R. J. Valieri and F. Zandonai. 2015. New abelisaurid remains from the Anacleto Formation (Upper Cretaceous), Patagonia, Argentina. Cretaceous Research 54:1-16

Grillo, O. N.; Delcourt, R. (2016). "Allometry and body length of abelisauroid theropods: Pycnonemosaurus nevesi is the new king". Cretaceous Research. 69: 71–89.

Kapur, V. V.; Khosla, A. (2016). "Late Cretaceous terrestrial biota from India with special reference to vertebrates and their implications for biogeographic connections". Cretaceous Period: Biotic Diversity and Biogeography. 71: 161–172.

Mohabey, D. M. 1989. The braincase of a dinosaur from the Late Cretaceous Lameta Formation, Kheda District, Gujarat, western India. Indian Journal of Earth Sciences 16(2):132-135

Mohabey, D. M. (1996). "Depositional environment of Lameta Formation (late Cretaceous) of Nand-Dongargaon inland basin, Maharashtra: the fossil and lithological evidences". Memoirs of the Geological Survey of India. 37: 1–36.

Mohabey, D. M.; Samant, B. (2013). "Deccan continental flood basalt eruption terminated Indian dinosaurs before the Cretaceous–Paleogene boundary" (PDF). Geological Society of India Special Publication (1): 260–267.

Novas, F. E., S. Chatterjee, D. K. Rudra and P. M. Datta. 2010. Rahiolisaurus gujaratensis, n. gen. n. sp., a new abelisaurid theropod from the Late Cretaceous of India. In S. Badyopadhyay (ed.), New Aspects of Mesozoic Biodiversity. Lecture Notes in Earth Sciences 132. Springer-Verlag, Berlin 45-62

Persons IV, W. S.; Currie, P. J. (2011). "Dinosaur speed demon: the caudal musculature of Carnotaurus sastrei and implications for the evolution of South American abelisaurids". PLoS One. 6 (10): e25763.

Prasad, V.; Strömberg, C.A.; Leaché, A.D.; Samant, B.; Patnaik, R.; Tang, L.; Mohabey, D.M.; Ge, S.; Sahni, A. (2011). "Late Cretaceous origin of the rice tribe provides evidence for early diversification in Poaceae". Nature Communications. 2: 480.

Prasad, V., C. A. E. Strömberg, H. Alimohammadian, A. Sahni. 2005. Dinosaur Coprolites and the Early Evolution of Grasses and Grazers Science 310 (5751): 1177-1180.

Prasad, G. V. R., and A. Sahni. 2009. Late Cretaceous continental vertebrate fossil record from India: palaeobiogeographical insights. Bulletin de la Société géologique de France 180(4):369-381

Ratsinbaholison, N. O., R. N. Felice, and P. M. O'Connor. 2016. Ontogenetic changes in the craniomandibular skeleton of the abelisaurid dinosaur Majungasaurus crenatissimus from the Late Cretaceous of Madagascar. Acta Palaeontologica Polonica 61(2):281-292

Rogers, Raymond R.; Krause, David W.; Curry Rogers, Kristina; Rasoamiaramanana, Armand H.; Rahantarisoa, Lydia. (2007). "Paleoenvironment and Paleoecology of Majungasaurus crenatissimus (Theropoda: Abelisauridae) from the Late Cretaceous of Madagascar". In Sampson, S. D.; Krause, D. W. (eds.). Majungasaurus crenatissimus (Theropoda: Abelisauridae) from the Late Cretaceous of Madagascar. Journal of Vertebrate Paleontology. Society of Vertebrate Paleontology Memoir 8. 27. pp. 21–31.

Sahni, A. 1972. Paleoecology of Lameta Formation at Jabalpur (M.P.). Current Science 41(17):652

Sahni, A. 1984. Cretaceous-Paleocene terrestrial faunas of India: lack of endemism during drifting of the Indian Plate. Science 226(4673):441-443

Sampson, Scott D.; Witmer, L. M. (2007). "Craniofacial anatomy of Majungasaurus crenatissimus (Theropoda: Abelisauridae) from the Late Cretaceous of Madagascar". In Sampson, S. D.; Krause, D. W. (eds.). Majungasaurus crenatissimus (Theropoda: Abelisauridae) from the Late Cretaceous of Madagascar (PDF). Journal of Vertebrate Paleontology. Society of Vertebrate Paleontology Memoir 8. 27. pp. 32–102.

Sereno, P. C.; Wilson, J. A.; Conrad, J. L. (2004). "New dinosaurs link southern landmasses in the Mid–Cretaceous". Proceedings of the Royal Society B. 271 (1546): 1325–1330.

Sereno, P. C.; Brusatt, S. L. (2008). "Basal abelisaurid and carcharodontosaurid theropods from the Lower Cretaceous Elrhaz Formation of Niger" (PDF). Acta Palaeontologica Polonica. 53 (1): 15–46.

Sonkusare, H.; Samant, B.; Mohabey, D. M. (2017). "Microflora from Sauropod Coprolites and Associated Sedimentsof Late Cretaceous (Maastrichtian) Lameta Formation of Nand-Dongargaon Basin, Maharashtra". Geological Society of India. 89 (4): 391–397

Tandon, S. K.; Sood, A.; Andrews, J. E.; Dennis, P. F. (1995). "Palaeoenvironments of the dinosaur-bearing Lameta Beds (Maastrichtian), Narmada Valley, Central India". Palaeogeography, Palaeoclimatology, Palaeoecology. 117 (3–4): 153–184.

Tortosa, T., E. Buffetaut, N. Vialle, Y. Dutour, E. Turini and G. Cheylan. 2013. A new abelisaurid dinosaur from the Late Cretaceous of southern France: palaeobiogeographical implications. Annales de Paléontologie.

Vianey-Liaud, M.; Khosla, A.; Garcia, G. (2003). "Relationships between European and Indian dinosaur eggs and eggshells of the oofamily Megaloolithidae". Journal of Vertebrate Paleontology. 23 (3): 575–585.

Weishampel, David B.; Barrett, Paul M.; Coria, Rodolfo A.; Le Loueff, Jean; Xu Xing; Zhao Xijin; Sahni, Ashok; Gomani, Elizabeth M.P.; Noto, Christopher N. (2004). "Dinosaur distribution". In Weishampel, David B.; Dodson, Peter; Osmólska Halszka (eds.). The Dinosauria (2nd ed.). Berkeley: University of California Press. pp. 517–606.

Wilson, J. A., P. C. Sereno, S. Srivastava, D. K. Bhatt, A. Khosla and A. Sahni. 2003. A new abelisaurid (Dinosauria, Theropoda) from the Lameta Formation (Cretaceous, Maastrichtian) of India. Contributions from the Museum of Paleontology, University of Michigan 31(1):1-42

Wilson, J. A.; Mohabey, D. M.; Peters, S. E.; Head, J. J. (2010). "Predation upon hatchling dinosaurs by a new snake from the Late Cretaceous of India". PLoS One. 8 (3): e1000322.

[buttonloadcell4-blog]

Selecting a load cell

miniature load cell

Action 1---Define your requirements

Testing range: This may decide the actual load cell capability, potential to choose.

Output transmission: Typical output of some sort of weight sensor is only two. 0mV/V, 0-5V or 4-20mA is usually achievable through dimensions or even external amplifier.

miniature load cell

Masse route: Tension? Compression? Anxiety as well as compression?

Working temperatures: Distinct strain gauges and also accessaries will be employed for different temp. selection.

Material: Aluminum, alloy stainlesss steel or stainless steel?

Rising: Female/Male thread, In-line, Area Support, Flange Mount, Thru-hole, or perhaps other structure?

Accuracy and reliability: Several application has various fault tolerance and a number of load tissue have essential contraindications low accuracy and reliability.

Environmental security: Anti-electromagnetic disturbance, anti-explosion, dustproof, waterproof?

Testing frequency: Various force sensor has diverse natural occurrence.

Other demands like electrical power connection, cable television length, installing space, and many others.

Step 2---Get to recognize about load cell

Fill up cell(Force sensor, force transducer): A measuring device which often converts mechanical force straight into electrical signal which is actually proportionate to the employed force.

Graded capacity: Typically the maximum axial basket full in which the transducer is made to gauge within their specifications. Lively redundancy need to be considered when deciding on the capability.

Rated output(Sensitivity): Often the sign produced by power transducer any time rated ability is put on, expressed within terms of mV/V.

Res: The smallest change inside mechanical type which makes a detectable enhancements made on the particular output signal.

Zero harmony: The output signal associated with the drive sensor along with no-load used.

Non-repeatability: The actual maximum difference involving pressure sensor output blood pressure measurements intended for repeated loadings underneath equivalent loading and natural environment circumstances.

nonlinearity: The maximum change of the calibration shape coming from a straight line driven amongst the no-load and ranked volume outputs, measured upon improving load only.

Hysteresis: The ideal difference between typically the load cell phone output psychic readings for the same utilized load; one reading received by increasing the masse via zero and often the other through decreasing the actual load from scored outcome.

Creep: The improvement in fill up sensor output developing together with time, while under weight, and with all the environmental problems and other specifics remaining frequent, defined simply by a certain time period similar to 30min.

Safe excess: The particular maximum load that could be employed without making a permanent switch throughout load cell overall performance. Specific as a percentage from the capacity (i. e. 150% of F. S. ).

Ultimate overload: The greatest basket full that can always be applied without actual break down to force sensor. Particular as a percentage in the capacity(i. e. 200% regarding F. S. )

Rewarded temperature: The range involving heat over which the particular load cell will be rewarded to maintain rated result and zero balance inside specified limits.

Operating temp: The limits of heat range within just which the push transducer can operate with out permanent unfavorable change in order to any of its efficiency characteristics.

Temperature shift in zero: The change with actually zero balance due to be able to a change in power sensor working temperature.

Temp effect on output: Typically the difference in output due for you to a change in masse cell working temperature.

All-natural frequency: The frequency connected with free oscillation under no-load conditions.

Step 3---Choose acceptable load cell according to help the application.

With the growth of sensor engineering, tailor made design is getting significantly common. Customizable variables incorporate:

Capacity

Rated output(mV, 0-5V, 0-10V, 0-20mA, 4-20mA)

Material(Al, alloy steel and s / s steel)

Dimensions

Electrical interconnection

Ingress protection class

Doing work temp.

Other parameters are necessary to your application.

[onlinecarbide]

Common Uses for Solid Carbide Drill Mills

Among the most common tools used by machinists today, we have drill mills. They come in many shapes and sizes, making them the most versatile tools in your workshop. What makes them special is their particular ability to cut along their angled tip, giving them an incredibly extensive range of operations.

There are, of course, subtle style differences between what is usually known as an end mill and a drill mill. The point geometry is one of the most noticeable. Mill-style tools tend to mimic geometries typically found on end and chamfer mills. However, drill mills usually sport an s-gash geometry at the tip that reinforces tool strength and allows the bit to engage the material axially. This gives mills an edge when it comes to drilling, but remains a good choice for OD milling. Here are some of the uses your drill mill can excel at: Drilling holes into metal workpieces is, without a doubt, one of the most common uses for drill mills. Rigid tools, like those made out of solid carbide, are extremely accurate and durable which makes them perfect for spot drilling and countersinking, especially for large operations and hardened materials. Just make sure your carbide drill mill has an angle that is larger than that of the drill bit that will follow the hole. Beveling and chamfering are other great uses for your carbide drill mills. As we mentioned before, their shape makes them incredibly useful for attacking the material axially. Pieces with long sharp edges can be easily chamfered to a smooth finish with the help of solid carbide drill mills. You can also bevel the edges of sheet metals easily by using a larger portion of your cutting surface or giving the piece multiple passes. V Grooving is another great option when you are working with drill mills. In the case of v grooving, a single pass with your carbide drill mills is usually enough even on hardened materials, but you can play around with different angles and cutter positions to get the results you want. Slotting is an excellent operation for solid carbide end mills like drill mills. It is best achieved with a single pass, but it is also possible to use two passes. Other operations you can achieve with drill mills are necking, pocketing, and contouring. Just keep in mind that they tend to be less efficient than dedicated tools for each task. However, if you are aiming for high-performance machining, having versatile tools usually means reduced cycles and an increase in finished parts, The best part of choosing carbide drill mills is that they are great at keeping their sharpness, even when you use aggressive tool paths and speeds. However, you need to make sure you have tools made with high-quality materials and processes. Online Carbide is an American carbide tool manufacturer that offers incredibly durable and efficient tools aimed at machine shops committed to High-Performance machining operations.

[stone-man-warrior]

January 12, 2021: 4:10 pm:

=================

now it says I cannot edit the post I made a few minutes ago, and is refering to an app.

I don't use an app. I access from the Tumblr.com website with a computer, not a phone.

and the place where the hashtags go are saying some reference to YouTube while using Tumblr.

Tumblr is hijacked by Google and Pope Bergoglio. But Pope Bergoglio is dead, died at Grants Pass Walmart about three weeks ago when he was cut in two by the guillote they put in the front entry from time to time, that day, was one of those times.

The means Google is at the Vatican without the Pope Bergoglio. The Tumblr slaves are crying for help in ways that they are able to, with changing the way the controles work, and wishing that someone would notice.

====================

Edit: 4:36 pm:

Assessment:

There is something fishy going on. Everywhere.

============================

Edit: 4:52 pm:

=======================

Edit: 4:54 pm:

“... and the operator say’s” ‘40 cents more for the next three minutes...”

That means the Operator was in on the call the whole time.

“Mrs. Avery” = Mrs. AV E R Y = Mrs. Audio/Visual + Power + Aaarrrgghh + “Y” signal splitter

“Mrs. Avery” = SAG Vatican terror pirate rerouting the call

It’s an avery, a place where birds are kept. Aviary (alternate spelling, Canadian accent, is Phoenician) A Coup.

The Dr. Hook & The Medicine Show song was from 1973.

The records available online say that the breakup of Bell Telephone & Telegraph (A/V) happened in 1982, but everyone knows that happened in the 1970′s. So, WT actual F is happening with that?

Y signal splitter’s work with the recorded history of the world the same as they do with pulsating signals. Truth splits to a dark place where no one can find it, a Gnosis Generator changes the truth, adds bullshit, removes some key information from the truth, then spits out the result for consumption by the people as Gnosis.

Sylvia, is gone. We are told she is moving away, never to be seen or heard from again. The operator wants more money, to keep you hanging on, to find out where Sylvia is at, and not hang up... they can‘t make any money if you hang up.

The Pope is a Crocodile (Croak-a-Dial)

==========================

Edit: 5:24 pm:

Diana Ross = Die on a Cross (she has to learn some Carpentry first, so she can build the cross the Christian Pirates are going to nail her to, See?

(Diana Ross is musical Royalty, in more ways than one, a Supreme Being)

Fast Forward to Princess Diana for Russian Mother Hoax Fractal View through a time warp paparazzi tunnel. (Paparazzi = Papa Arrgghh Nazzi = Pope Pirate Nazi). It’s not about black or white. It’s about acceptance of the Pirate Pope, or not)

===

From the Dr. Hook song I linked somewhere else:

“We got a genuine Indian Guru that’s teaching us a better way...”

It’s “Amp Guru”.

“Genuine” = Generates a Whine from a phone call, American Indian Style.

Remember what happened to all of the American Indians? (native Americans)

Then, add the phone hijack, the operator, “Turn water into wine” all boils down to “The Jim Dunlop” (all Pope, all the time, eternal Pope, Amp Guru at Vatican Choir HQ) on the phone call, listening all of the time. It must be a “Pay Phone” or the Operator would not be exposing herself like that (nun; Russian Whore). The “Turns Water into Wine” is the Modern Day Indian (you & me) all being turned into Whine... crying for help on he phone while trying to find Sylvia on a hijacked phone call where some asshole (nun) is pretending to be Sylvia’s Mother and is jacking US around on the call.

Jim Dunlop, maker of Cry Baby Wah... since 1966.

It’s a gas peddle (throttle) for “Axial Expression” (Axpression).

To Throttle, is to accelerate OR decelerate. (AKA: Buffer (time warp); Governor (leash; limiter)

On a phone call, it controls the speed at which you will decide to accept the Pirate Pope later on, after more effects are applied to the mix, and you slowly learn intuitively about the Christian Pirate Ship, it’s Captains, the size... enormity of the boat, and the French speaking scalawags who crew the thing. They need you and me to move the boat forward, we are the sail on the mast in the wind. We are Jesus. A sale on a pirate ship. nailed.

If you have a Bic Lighter, and learn about the Chi that resides within you, and also carry and use a fingernail clipper for defense, you can defeat the pirates.

A Chihuahua armed with hot sauce and sharp teeth.

================================

Edit: 6:05 pm:

Once again, the puzzle parts add up to reveal a glimpse into the Vatican, through the television screen, as it looked in 1965 - 1966 and thereabout, to see the Puppets of the Thunderbird’s TV show, “the Tracy’s at Volcano Island”, are “Amp Guru”, and “Amp Guru” is a culmination of all of the Pope’s throughout recorded history AD, materialized, as “The Jim Dunlop”, Captain of One Vatican Pirate Ship.

Read this account to see how that was decoded with a secret agent decoder ring from an old box of Cracker Jack’s over the past six years, and a lot of life experience.

===========================

Edit: 6:17 pm:

At the 1:25 minute mark, Jim Dunlop Amp Guru thugs are sent to hassle Jimmi, right there on stage. They Rush him, get all in his face while he’s performing and he does not even miss a lick.

He did not sign-up to be a Christian Pirate. He played left handed, with a right-handed guitar, upside down, to try to show you and me that there is something important to know about the guitar. He had plenty of Chi, was able to be among the very best of the best of guitar players, with a upside down and backwards guitar played on the opposite side.

Fucking Genius.

They sent Jimmi to the 27 Club, where he met Sylvia, they remain there with Janice Joplin, and others at the 27 Club Great Gig in the Sky.

==================

Edit: 6:31 pm:

============================

Edit: 6:41 pm:

Personal note:

This past week has included that my vision was very poor while trying to write, trying to see to cook some food, to see to walk around or do anything at all. But today something has changed, the local terror cells are not releasing the kind of poison gas that affects vision, I can see clearly today. That has not been the case this past week at all, and has been ongoing for many years as the local terror cells release a variety of poison gasses into the surrounding area, the “return air” vent on the forced air heating system draws the poison gasses into the house through the chimney, dryer vent, window “weep holes”, and other household venting and cracks and holes that exist in all houses. The windows are all closed, but the heater return air vent creates a negative pressure condition inside the house, and draws air in from outdoors where the air has been saturated with poisons released by the neighboring terror cells.

If it’s happening to me, it could be happening to you too.

My vision is perfect today, all day. Something changed outside.

That above is strange, it’s the 12th, but that grey area says it’s the 13th. The post there behind the grey area is titled “January 12, 2021: 3:57 pm:”

This one:

I am not able to make edits to that one, it’s locked up by Tumblr. If I try to make additional comment, that other blue message that says something about a Tumblr App shows up, prevents me from further additional comment.

If I could make additional comments to that other post featuring Donald Trump on the cover of the Rolling Stone, then, I would say more about what happened on January 6, 2021 at the Fred Meyer Gas Station when that Salem Oregon Government Bus showed up with the explosive guitar bombs inside, and Mark Keisel was there to make the hit to kill me, but exploded with others who were on that Salem Oregon Government Bus after I defended against Keisel. If I could make additional comments to that post above, on the actual post that’s is locked up and is not accessible for making further comment, then, I might be tempted to say that Donald Trump was also on the Salem Oregon Government Bus that was sent to kill me at the Fred Meyer Gas Station on the 6th of January, at precisely 3:36 pm (I have the receipt in my pocket still).

I might comment that the Bus exploded with Donald Trump on it somewhere nearby the Josephine County Sheriff’s Office on F St., about one-quarter mile from the Fred Meyer Gas Station in Grants Pass, but I can‘t do that, they have me locked out of that one particular post, the one with the mystery 13 on it in the screenshot above.

I could say a whole bunch of additional stuff about that.

The important part to what I might say is that all of that bullshit reported on Twitter about a White House invasion, is all bullshit. What that really is, is a way for Nancy Pelosi to say that Donald Trump exploded on a Salem Oregon Government Murder Hit Bus, and the shit went side-ways.

That is what that is all about in the Twitter news, and everything being said and done by the SAG Congress, Pelosi & Company, is all to make distraction so that no one will be interested in knowing where Donald Trump might be. Even Joe Biden is in on covering for the whereabouts of Donald Trump in the Twitter news.

It’s all bullshit! The whole WH invasion of January 6, 2021, is bullshit cover story done by SAG US Congressional Shills!

He was on the Salem Government Bus when the thing exploded into bits from at least one guitar bomb that was also on the bus, built by Mark Kiesel of Keisel Guitars. The explosives are suspected to have been provided by Micheal Moore of “Super Size Me” fame. If not, Mr. Moore knows where the explosives came from.

Send help to Oregon, learn more.

Please send medical services.

Bring your own hospital.

=========================

Edit: 7:37 pm:

This is a good place to make a REMinder about 737 MAX Airplanes and that I was there, at Boeing Seattle in 1998 when the place was taken by machine gun wielding terror soldiers who did not speak any English at all.

“What did those guys look like?”

Thank you for asking, good question.

You know that Die Hard movie with Bruce Willis at the Christmas Party?

Those blonde guys with long hair. They looked just exactly like those guys, at two of them did.

They killed all of the office workers. Young women who worked in the office at Boeing Seattle. They were called out to the airplane assembly area near the big door to the enormous hanger that Boeing is. It’s a big hanger where airplanes are built.

The women were lined up against a wall, told to say who they were, and what their job titles were, then, the people were separated, “these people over here, those people go over there”, and one of the groups of all women were shot against the wall. There was someone there in the Boeing tour group that I was part of who did some interpreting for the people with the machine guns. I was asked to speak to the women before they were shot also, to ask them what their job title were.

The bottom line here is that all of the math works out that SAG/Britain/Vatican/German terror is planning to use those “Grounded” (modified for terror) 737 MAX to do aerial spraying of poison gas over large populous regions some where. I suspect it’s a global operation in USA and Asia, maybe South America too. There are a whole bunch of those airplanes, plenty of time to make modifications has passed, and they had time to move them around to different parts of the world also.

I suspect Mustard Gas.

Also, reminder that I was there in 1970 when all of those rock star musicians I tell of from time to time were saying that the goal was to eliminate the population of the world, to reduce the population of the WORLD to about 500,000 people. That’s Half-Million people remaining after the “50 Year Plan“ is done. (Five-Hundred-Thousand inhabitants of the globe)

They were serious about that. We can see that they were serious about that. There are numerous clues, indicators, guidance, all that leads to a global depopulation of Biblical Re-Genisis magnitude.

Start Over... is the plan.

Those with SAG Cards in good standing, dues paid in full, might survive, if they are among the ones who draw the long straws, not the short ones at the “Heaven’s Gate” somewhere. (SWSX Terror Convention; It’s compass, points down, and to the left, depending on what hemisphere you are on at the time you take a look at the compass. I think. Maybe it’s a Thompson, goes up, and to the right when fitted with a full drum magazine, so, Hemispherical considerations are warranted, with respect to the right & left hemisphere’s of the human brain, for making the correct choices at the SXSW terror convention on Judgement Day for SAG Card Holders w/Dues Paid in Full, card in good standing)

This is not a joke, I am not making this up.

I was there. At the table at the time.

I was about ten years old. I remember.

So, that is the most important thing to know about why Donald Trump could have been inside of a Salem Oregon Government Bus at the Fred Meyer Gas Station on the 6th of January, 2021, and exploded when the shit went side-ways.

What’s more important is the date, the timing seems to be on or near the 20th of January, 2021, for the planned Boeing MAX aerial Mustard Attack of the world. (Grey Poupon, for decoding purposes. French’s will also work for decoding Twitter news, and promotional email from Music Industry Advertisers and Retailers)

Oregon is the place where a vast majority of the terror is HQ’d. California is where the most leadership is, Washington DC are all puppets, only the messengers, as far as I can tell. Congress is a voice of hidden leadership at corporate offices of all kinds, perhaps. But the highest of terror high command appears to be the “Amp Guru” the “Jim Dunlop” the “Vatican Choir”. Those seem to be higher command level than “British House of Lords”, or, could actually be the very same, could be British House of Lords = Amp Guru.

I still recommend the best defense for immediate results is to take Twitter offline. Make it go away. Even a temporary hiatus for a couple of months would help. The most commands come through the Twitter news stories, coded into them.

Would the world be so horrible without Twitter that the safety measure cannot be done at least temporarily?

Google is the same as the Pope’s Office Filing Secretary.

Google corporate and the mechanisms the make it work have to be taken into custody of Global Security persons who are opposed to being exterminated like a bug in a jar filled with Raid. Are there such persons left alive somewhere?

======================

Edit: 8:45 pm:

There are some people who know that the explanation about the Boeing 737 MAX attack already has come to this very point once before in the past. Only few people are aware of that, and all of the recorded documentation was deleted, made unavailable for me, but is available to others somewhere, I don’t know exactly where, but the Oval Office is a likely place to find those records, or access to them, from Beta Twitter in around 2008 and also on old Tumblr account, and also on old Google+ accounts.

The people who stopped the attack the first time are probably all dead now.

So, here you go, there is no Russia.

Don’t drop this this time:

It’s Mongolia.

They are no terrorists in Mongolia. They don‘t have any nuclear warheads in Mongolia, I don‘t think Mongolian’s even have an internet.

=========================

Edit: 9:08 pm:

Think about this please:

Size and scope demonstration of Vatican pirating in USA:

Let’s say you are a terror army leader who’s army uses nitrous oxide as a primary weapon, your goal for the time being is the kill and replace as many US Citizen voters as possible without being caught. You need a way to get nitrous gas into as many households as is possible. So, you convince the Residential Window Manufactures that they need some representation in DC, to lobby for concerns about climate change that affect the manufacture rules for window makers. The window manufacturers consortium is created because you are really good salesman. So, once that is done, you convince congress that it’s a good idea to mandate that there will be some small holes put onto the bottom of all the windows sold in USA, “Weep Holes” are invented for the purpose that if some condensation happens to gather on the windows, it will drip down safely out of the house through the “Weep Holes” in all of the windows, from now on.

That way, since you need to get the nitrous into as many homes as is possible, it’s much easier to do if the window has some holes there for the terror army to use a means of putting the gas into the houses so the people can be killed and replaced with other people who will vote the way you tell them to vote, making everything more predictable at election time later on.

There, you just managed to create a easy way so your terror soldiers can do their job faster, better, and by government mandate with blessings from the Window Manufacturers Consortium who are people who care about climate change.

You have been doing this a long time, and are so skilled as a salesman, that you can sell moccasins to an Eskimo, and snow shoes to a native American in Arizona, no problem.

You learned long ago, that making things easy for the pirates, speeds the boat along and that a little grease in the grooves makes the guillotine blade come down much smoother. Holes in the window, are grease on a guillotine groove.

===========================

Edit: 9:34 pm:

I go to the store, and there is always some asshole who wants to bum a cigarette as I come out of the store, or wants a couple of dollars for gas.

That’s a lobbyist in training.

A lobbyist, literally, are people who go to places where congressional members are likely to be, such as in the lobby at Capitol Hill. The congressional members need to come out of their offices at least once per day, so, go bum a smoke, hang out in the lobby and wait until they walk by, to ask for some gas money.

===============================

Edit: 10:03 pm:

(Pacific Power Corp turned off my power for just one second as I went to share this next part here, as I pasted the URL for this Buick Commercial, the power went off long enough to knock out my modem, and stop my computer from running. This is big terror news here, it’s revealing, is a major peice of evidence of the Window Manufacturer’s Consortium being used to put holes in everyone’s windows, by government mandate)

As I was saying when I was so rudely interrupted by Pac-Pow:

You are are a Christian Pirate Leader, are on TV, and with this commercial have instructed millions of terror pirate scalawags that you were successful at putting holes in all of the windows in USA, and their job will be much easier after all of the new houses are built after this ad was aired.

Grease, on the grooves of the guillotine ad:

Edit: 10:23 pm:

I need some assistance to keep the connection from being hijacked all the time.

Pac-Pow zapped my power, but that is not all, the Centurylink/Google/Tumblr terror consortium is still fucking with me also. Pac-Pow is the right hand, Centurylink is the left hand, Google is the brains of the three, and tumblr is like a pen that won‘t work all of the time, or a pencil that keeps breaking, have to keep sharpening the damn thing.

That Norton product is fake, I pay a lot of money annually for Norton 360, but they give me that fake one, I can’t do anything about it. It’s been fake since day one. I have been able to get a real copy in the past, but they change it in the background to that fake one. It’s been about fifteen years since I was able to download the real Symantec product. I pay for Norton 360, but I get Symantec Life Lock instead. Centurylink can and does do a lot of invisible hokus pokus with that fake product they came up with. You could have the same problem on your computer. There is nothing you can do to get the product you pay for, that is what you get. It never finds any problems, ever.

My computer must be perfect.

That thing that happened with the power going off was like this, I suspect:

I went to YouTube. I knew exactly what I was looking for. I typed a YouTube search for “Buick commercial with All Buick’s will have holes in the side”, which is another commercial about the same thing, except the ad says “all Buick’s will have holes in the side” on the commercial I was specifically looking for on YouTube. Then, what happened, is a flag went up at Google HQ, they know that the Buick commercials are a problem, so the called Pacific Power right away to scare me away from posting the commercial to show you about the Weep Hole terror at the US Government Mandate level.

Google initiated the power cut at my house, lasted only a second or two.

Please help make the connection secure at least, if you won‘t send medical help.

=============================

Edit: 11:17 pm:

Local Update:

A walk to the mailbox was uneventful.

There is no mail, just air inside the mailbox.

It’s warm, is 51 degrees outside and drizzling.

The warmth could be the reason my vision is do good today, as the forced air heating has not been on much today, I have the thermostat set for 59 degrees lately, down from 61 degrees after getting a giant size electric bill last month. The warm temperature and absence of use of the return air making the negative pressure condition could be why not much airborne gas came into the house today, my vision was very good for all but about one hour today.

The Myers have all of their interior lights turned off, and have a altarnate porch light turned on at the addition entrance that was put onto the house about three years ago. The holiday lighting around the door remains on.

Chapman’s is showing signs of strangers at 3701 Russell road with unusual lighting habits.

All remains dark at 520.

I did not pay attention to trash can conditions, was interested in Myers.

Freebergs is nearly dark, one internal house light can be seen from the road, just one small string of holiday lights out by the roadside is on.

Monroe Offensive Trailer has lighting on at the entry and a small blue glow in the rearmost part of the trailer is present. Monroe’s trailer was dark last night. The Copper colored Toyota or GMC Canyon truck that was at the Monroe trailer is no longer there at the trailer, could be in the driveway as usual. I did not go over that way.

Bells is all dark from where I can see.

I don’t have a view of Phillips 507 to ever say anything about, but there has been absence of activity there for some time, but I don‘t go outside often enough to know about much activity, only static conditions. It’s too dangerous to go outdoors in day time for any length of time.

Chartrand’s is per yesterday as far as I can see.

Dietrick’s turned off the extra porch yellow bug light that was on last night, it’s back to one yellow porch light showing now.

Clyde Baum’s seems a bit darker, less lighting than is usual. I don‘t have good access to a view to know what is normal and was is not.

If I looked at Strong’s, I did not see anything remarkable, I was in hurry, and did not want to fuck around, so, I don’t know, have to look later.

That’s all.

There were no indications of traffic noises near or far.

The Norton security “background tasks” pop-up window was on the computer screen when I returned from a five minute walk. Only five minutes of idle time had taken place, as is usual for the Norton pop-up, despite that it’s supposed to wait about a half-hour before doing background idle work.

The Norton pop-ups are being used to fool someone, somewhere, and have been for many years.

The heater was just on, my vision is poor now.

======================================

Edit: 1-13-2021: 12:06 am:

The thing about the “Weep Holes” in the windows, I have known for decades, I did not know the magnitude of it though until more recently.

I was held captive by Eastwood Guitars and other music industry terror operatives in around 1998 - 2002, forced to design many things for many different terror cells. This guitar is one of my designs. I have never been given credit for any of the things I designed, but that is not important, what is important is that I included a lot of hidden ideas into the things I was forced to design, and this Bucklund model is one of them. It’s designed after, and in association to my knowledge of the Weep Holes, and their connection to the Buick advertising. The guitar is a Buick. It was done to show later, if I could get free of the captivity, that the window Weep Holes are a product of terrorism, done by the same groups of people who were holding me and my family captive.

I am free of that captivity, but into another kind of the same captivity now.

It’s a Buick.

It was designed to explain the Weep Holes that were put there so that the nitrous would be easier to put into the victims homes.

===========================

Edit: 1-13-2021: 12:39 am:

One more time:

The nitrous oxide gas won’t hurt you, and, it won’t hurt the sword wielding terror Christian Pirate who is putting it up your nose. You don‘t smell it. You don‘t see any gas. You can‘t taste that the gas is there. You have no idea that you are being gassed. The terror soldier is fully aware of where the gas is, what direction it will go. They can take precautions that you are not going to do.

The gas does not hurt you. It does make you dumber than a box of rocks at a quarry. Stupid dumb. You will laugh your ass off, as the terror soldiers entertains you momentarily, just long enough to make you put your hands into the hand cuffs they bring with them. The sword is a last resort, just in case you fight back. They want to capture you, not kill you right away. They need to know where the rest of your family is at, and where your assets are at, and how to access them. They take you to a dungeon, basement somewhere, or a empty warehouse to torture you so you will talk. Once they are done, you will be begging them to kill you, it’s that bad.

The gas does not kill you, won‘t hurt you.

The terror soldiers kill you.

The nitrous works as a truth serum, it removes all of your instincts to protect yourself, is invisible in every way, it will make you tell the truth, you cannot tell a lie when exposed to nitrous gas, it won‘t work if you try. You will lead them directly to your family. It’s a pain reliever, you won‘t scream, they can torture you at a mall parking lot at Christmas time, you won‘t scream, no one will know as they pass by with Black Friday Sale Items.

You are not immune to nitrous gas.

If you think you are stronger than the gas, you are fool, and are exactly the kind of victim that makes a good target.

Terror soldiers, Christian Pirates, do the killing, not the gas.

That, and it’s cheap to make. For $50 you can buy everything needed to make an ample supply at any well stocked farm supply store, a visit to a department store for a coffee maker, and gag shop for some balloons to store it in. For another $50 you can get the professional pressure tank at any well equipped plumbers supply outlet.

Plumbers test ball is the preferred pressure tank among the Christian terror pirates, rectally holstered:

=======================

Edit: 1-13-2021: 3:01 am:

I am being throttled by the internet terror consortium, Google/Centurylink/Tumblr in so many ways it’s not easy to know which of the group is doing what particular digital hokus pokus.

For the past few hours, these conditions are notable:

The day started with the Tumblr app notice on my previous post featuring Donald Trump on the cover of the Rolling Stone, then, I was not allowed to make additional edits to that, had to start a new post, this one.

After that, the page I was working on, would jump all around, I go to type some words, and the page goes flying up to some other place.... have to find my curser,  I know it must be around here somewhere... so, that happened all day.

Then later, after the bit about the plumbers test ball, the internet just stopped working... the computer was working. The modem was working. All of the internet connections where in place, and were working, but there was no connection... all of the pages I tried to go to were blank.

“Sorry, we can‘t find that web site, please try again later and check your connection settings...”

Assholes.

One page did work. I was able to connect to Google Gmail to see the contents of my Google Gmail. Yahpoo mail was gone, so was Wikipedia Ten Codes link... all blank, but all the modem lights were on, and the internet connection indicator said all was good.

It was like I was totally stranded, even worse than I already am stranded.

I broke the internet.

The whole thing for about two hours.

This happened:

See, says it’s all good at the bottom right where the internet connection icon is at.

They gave me that scary message, says my privacy is important there at the top... they are going to go ahead and route my privacy somewhere else, it says.

Terrorist bastards.

That was the case after posting the photo of the plumbers test ball, immediately after that.

I am glad it works now. Even if there is no one there who will talk to me.

I got a phone call on Sunday, it’s Wednesday now, but I did not answer the phone call, or check the message, it’s too dangerous to check a phone message when the US President is chasing after you, to kill you. Trust me, that is scary.

=============================

This Just In:

1-13-2021: 2:50 pm:

See that? The way the movie camera icon is not working?

The Google/Centurylink/Tumblr internet terror consortium strikes again. They won‘t let me post the link to the Ozzy Ozbourne version of the Stepenwolf song Born to be Wild, where it’s all different kinds of fucked up at Ozzy’s House too.

Did you know that Ozzy Ozbourne has gone through somewhere around 22 spinal surgeries in his lifetime? All result of Amp Guru and the Vatican Choir terror pirates beating the living daylight out of him for writing and singing the revealing lyrical content he exposes in his music. They didn‘t send him the Great Gig in the Sky just yet, instead, the tossed Sharron at him, and then later, the gave him a reality TV show, Jimmi Hendrix Stage Rush style at his house every minute of every day.

Look at the date of the weird Ozzy song at the linked page above.

Ozzy, doing Stepenwolf’s Born to be Wild, featuring Ms. Piggy and The Count on backing vocals:

https://www.youtube.com/watch?v=c1NGzog11vc

(Factoid: It is musically forbidden to do a cover of Born to be Wild, and/or Deep Purple’s Smoke on the Water, the Vatican Choir Amp Guru murder police will track you down, burn your guitar, and bury you in your amplifier if your band plays those at a night club)

Save Ozzy, save the world. He can tell all, people will listen.

Note to Mr. Osbourne: You may not remember the day I chased those Amp Guru thugs out of your house in So Cal, but if you think about that very narrow doorway at your studio, the one I walked through and sat down, and wrote you a note, to say what little I knew at the time, you may recall the day I chased thugs from your home.

===================

1-13-2021: 3:30 pm:

Terror math:

It’s about the Bass (Base) of Global terror.

Black Sabbath: N.I.B.

https://www.youtube.com/watch?v=jB84LL-Z8TU

Just the title is all you need.

There must be a Knight around here somewhere, a stowaway scalawag.

Perspective is necessary from a listener, audience standpoint.

You need prerequisite knowledge about coded language of the entertainment industry, here, specifically, scale is not a factor. Whatever it is, can be as large or small as is needed at a given time, so, ...

N.I.B. contains three periods. Those are “Blood”, “Moons”, “Months”, “Heads”, “Stones” and “O’s”... other as needed.

So, N.I.B. = NOIOBO

It’s a SAG thing to start with (Head Start). Ozzy and SAG are not getting along very well at the time.

Three Stooges show up, beat the living daylight out of Ozzy Osbourne for having recorded the song “War Pigs”.

So, “Spread Out”: N O I O B O

Step the fuck back, have a look.

We have to consider the global magnitude:

Ozzy is from Britain, or UK, somewhere close to the source (Sorcerer)

So, they sort things out over there, God’s job. is to sort things out. (Google)

So, sort it out: “N O Ten Downing B O”

Maybe we can Start there.

I see nitrous there. N O  is nitrous.

“Nitrous Oxide Ten Downing B O”

Sounds offensive to me.

“Nitrous Oxide Ten Downing B Offensive”

Hmmmm....

Where is that Ten Downing (I O Downing) again? It’s in Britain, we already decided it was all about the Bass (Base).

“Nitrous Oxide Ten Downing British Offensive”

Conclusion:

“N.I.B. = Nitrous Oxide Ten Downing British Offensive” 

Perspective:

N.I.B. by Black Sabbath

(Nitrous Oxide Ten Downing British Offensive by Black Sabbath)

(Nitrous Oxide Ten Downing British Offensive by NO² Sunday, See?)

Oh, yeah

Some people say my love, cannot be true Please believe me, my love, and I'll show you I will give you those things, you thought unreal The sun, the moon, the stars all bear my seal

Oh, yeah

Follow me now and you, will not regret Leavin' the life you led, before we met You are the first to have, this love of mine Forever with me 'til the end of time

Your love for me has just got to be real Before you know the way, I'm goin' to feel I'm goin' to feel, I'm goin' to feel

Oh, yeah

Now I have you with me, under my power Our love grows stronger now, with every hour Look into my eyes, you'll see who I'm My name is Lucifer, please take my hand

Oh, yeah

Follow me now and you, will not regret Leaving the life you led, before we met You are the first to have, this love of mine Forever with me 'til the end of time

Your love for me has just got to be real Before you know the way, I'm goin' to feel I'm goin' to feel, I'm goin' to feel

Oh, yeah

Now I have you with me, under my power Our love grows stronger now, with every hour Look into my eyes, you'll see who I'm My name is Lucifer, please take my hand

Songwriters: Butler Terrence (usa 2), Iommi F Frank

For non-commercial use only.

Data from: Musixmatch

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

You can decode the lyrics on your own.

+++++++++++++++++++++++++++++++++++++++++++++++++++

Black Sabbath: War Pigs:

https://www.youtube.com/watch?v=S_A6y58afFY

+++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++++++++++++++++++ 

+++++++++++++++++++++++++++++++++++++++++++++++++++ 

+++++++++++++++++++++++++++++++++++++++++++++++++++ 

+++++++++++++++++++++++++++++++++++++++++++++++++++ 

+++++++++++++++++++++++++++++++++++++++++++++++++++ 

+++++++++++++++++++++++++++++++++++++++++++++++++++ 

+++++++++++++++++++++++++++++++++++++++++++++++++++ 

+++++++++++++++++++++++++++++++++++++++++++++++++++ 

+++++++++++++++++++++++++++++++++++++++++++++++++++

Etcetera, and so on ...

It’s Christian Pirate terror math. They do addition, with subtraction.

HMS Eleaner Rigby, is the name of the British Submarine Christian Pirate Ship.

13 January 9600

March 13 9600

3139600

Play the turn-a-round:

1339600

There is something fishy going on.

Play the turn-a-round again:

1336900

Stooges come on stage, get in your face for playing Born to be Wild:

Spread out:

13 369 00

Pirates are superstition bastards:

They want me to spread that 1 and 3 apart. Fuck that.

369 is International Pirate Code for: Eternal Progression. Eternal Power. Infinite Control, and other ways of saying that the pirating will continue ...

Fuck that too.

They work the math a little different than I do:

The double zero’s, are “Dead Bitches” in Pirate Speak.

AAaarrggghhhh!

There is more than one way to be a Pirate!

Davey Jones in Locher:

https://www.youtube.com/watch?v=Br_-a21Myls

https://www.youtube.com/watch?v=tM8PHrArL_E

[giftcollection4u]

Inalsa Ruby 1000-Watt Dry Iron with Non-Stick Coated Soleplate (White and Purple) [bdp_post_gridbox]

Price: [price_with_discount] (as of [price_update_date] – Details)

[ad_1] [bdp_post_gridbox] Product dimensions: 27 x 12.2 X 14.2 Cm ; 699 g item model number: ruby asin: b00qnorn8y. Cord length: 1.5 m ; Frequency: 50 Hz ; Power Consumption: 1000 W ; Power Input: 220-240 V.

True Position Axial Aligned Steam Holes -> The Placement, Alignment And Size Of Our Steam Holes Gives You The Maximum…

[vsplusonline]

Inalsa Ruby 1000-Watt Dry Iron with Non-Stick Coated Soleplate (White and Purple)

New Post has been published on https://apzweb.com/inalsa-ruby-1000-watt-dry-iron-with-non-stick-coated-soleplate-white-and-purple/

Inalsa Ruby 1000-Watt Dry Iron with Non-Stick Coated Soleplate (White and Purple)

Price: (as of Jan 01,1970 00:00:00 UTC – Details)

Product dimensions: 27 x 12.2 X 14.2 Cm ; 699 g item model number: ruby asin: b00qnorn8y. Cord length: 1.5 m ; Frequency: 50 Hz ; Power Consumption: 1000 W ; Power Input: 220-240 V.

True Position Axial Aligned Steam Holes -> The Placement, Alignment And Size Of Our Steam Holes Gives You The Maximum Amount Of Steam Required While Maintaining Even Heat Distribution Throughout The Sole Plate. Comfortable & Easy Grip: The Easy Grip Handle Of The Iron Ensures Comfortable Ironing. With Ergonomic Grip Your Hand Fits Well And Does Not Slip During Ironing. The Handle Is Cool Enough & Shock Proof. Swivel Cord For Easy Movement: Flexible And Swivel Cord Provides You More Comfort And Allows Freedom Of Moment. Iron Just The Way You Want. Button Groove: It Speeds Up Your Ironing Along Buttons & Seams. This Will Make Ironing Along Buttons And Seams Fast And Easy. Precise Temperature Control -> 100% Safe On All Ironable Garments Even The Most Delicate Like Silk, Wool, Polyester. Easily Select The Ideal Temperature Based On Your Fabric Type. Additional Features ->Temperature Indicator Light Indicates When The Iron Is Hot Enough. Pointed Tip Allows You To Iron Even The Hardest To Reach Areas. 2 Year Warranty->We Sincerely Provide With Product Warranty And Genuine Customer Service. If You Have Any Needs Or Questions, We Will Be More Than Happy To Assist You contact_us on: [ 9773982065 ] 9:30-5:30 Pm.

[confrontingbabble-on]

Watch...https://www.youtube.com/watch?v=Ze0PHCMHa1s

“I'm not an atheist. I'm just a follower of reason. Oh, hi, new neighbor. What library do you go to? I love believers. I just hate their beliefs. I have a personal relationship with reality. You're religious...? Oh... well, I'll think for you. You don't act like a Christian. You're really open minded. Oh, God loves me? Well, Darwin explains you. Axial tilt is the reason for the season. I do good in the world because it's the atheist thing to do. The universe works in non-mysterious ways. Oh, stop complaining about my beliefs. You just hate reason. But it's okay. Reason loves you anyway. I just found a great parking spot! Thanks, random chance! We all have a truth-shaped hole in our brain. Conservatives are waging a war on science!... (wait, that one makes sense.) I know it's frustrating that your glass shattered on the floor, but remember: Gravity has a plan for you. I would like to thank great genes for my team's victory tonight. A lot of people reject atheism because they just don't want to obey the laws of physics. With science, all things are somewhat probable. You don't accept evolution? Then what's stopping you from murdering people if you don't think altruism guides your biological fitness? Just because you don't believe in evolution doesn't mean you didn't evolve. Deep down, I know you really believe in the scientific method. You don't accept science? That's just because you haven't gone to the right natural history museum yet. If you don't accept evolution, then why do you talk about it so much? I'm not worried about death thanks to the grace of my telomeres. A peer-reviewed journal said, I have no reason to doubt it, that settles it... unless new evidence becomes available. Before we eat, let's bow our heads and give thanks to the farmers who cultivated and harvested this food. Just you wait. When you're on your deathbed, you'll finally ask for medicine. I heard Thomas Aquinas recanted right before he died. There will be fire and brimstone and Earth will be destroyed!... in several billion years. Why don't you just try not being delusional? Behold! The Christian's nightmare. Now if you study a well-made banana, you'll find that it's a consequence of evolution. Artificial selection, in this case. I'll spare you all my screams of "Oh, Darwin!" The point is that we'd sound like jerks. Arrogant. Condescending. And that's what a lot of Christianese sounds like, too.”

Also watch...https://www.youtube.com/watch?v=vNjEbPfc2d0

[fillthevoid-with-space]

Welcome to the second episode!

Below the cut are my sources, music credits, a glossary, a timeline of all the people I mention in the podcast, and the script I was working with. I’m on Twitter @HDandtheVoid if you want to tweet at me instead of tumblr-ing me!

Let me know what you think of this episode, let me know what you think I should research next*, tell me a fun space fact… any feedback is helpful!

*(My current thoughts are henges, spectroscopy dark matter, or black holes. Let me know by April 27th so I can start researching before I put up the next podcast on May 8th!)

Glossary:

astronomy - first used to describe a field of study in the 12th century, it concerns the study of objects and matter outside the earth's atmosphere, as well as their physical and chemical properties

corpuscles - any very small particles. A precursor to atoms.

cosmology—the study of the properties of our universe as a whole.

eccentric orbit - an orbit proposed by Ptolemy’s model of the universe where each planet's circular orbit is not centered on the Earth but at a point slightly away from Earth. See an example in the link.

elliptic orbit - also known as a Kepler orbit, it is an orbital system where a smaller body, like the moon or the planets, orbits a larger body like the Earth or the Sun, with the Earth or Sun at one focus of the ellipse while the other focus is empty. See an example in the link.

epicycle - a planet’s smaller orbit around a point on the larger orbiting sphere it is assigned to. See an example in the link.

Platonic Solid - a regular, 3-dimensional, convex polyhedron constructed by regular polygonal faces with the same number of faces meeting at each vertex. Only five shapes meet these criteria: tetrahedron, cube, octahedron, dodecahedron, and icosahedron. See an example in the link.

precession of the equinoxes - also called axial precession, it is a slow and continuous change in the orientation of an astronomical body's rotational axis due to gravity. On Earth, it is seen as a westward movement of the equinoxes along the ecliptic relative to the fixed stars, opposite to the yearly motion of the Sun along the ecliptic. See an example in the link.

solar system - first used in 1704, this term describes the Sun together with the group of celestial bodies that are held by its attraction and orbit around it.

Wilkinson Microwave Anisotropy Probe—a spacecraft operating from 2001 to 2010 which measured temperature differences in the cosmic microwave background radiation leftover from the Big Bang.

Script/Transcript (It’s not exactly what I said, but it’s what I was going off of. It’s conversational and it’s less rambly than what I actually said)

Timeline of people mentioned:

Claudius Ptolemy, Greek (100-170) Al-Hasan Ibn al-Haytham, Arab (965-1040) Nicolaus Copernicus, Polish (1473-1543) Tycho Brahe, Danish (1541-1601) Giordano Bruno, Italian (1548-1600) Galileo Galilei, Italian (1564-1642) Johannes Kepler, German (1571-1630) René Descartes, French (1596-1650) Sir Isaac Newton, English (1642-1726/7) Edmond Halley, English (1656-1742) Immanuel Kant, German (1724-1804) Pierre-Simon, marquis de Laplace, French (1749-1827) William Huggins, English (1824-1910) Heber Curtis, American (1872-1942) V. M. Slipher, American (1875-1969) Albert Einstein, German (1879-1955) Harlow Shapley, American (1885-1972) Edwin Hubble, American (1889-1953)

Sources:

Mars in retrograde during Tycho’s time

History of the idea of black holes

Size of the universe since 1919, presented as a teacher resource

Timeline of cosmological models

Current cosmological model

Measuring the size of our universe via NASA, with links to further universe-size resources

19th-century size of our universe debate between Shapley and Curtis

Cosmological Constant via NASA

Cosmological Constant via HubbleSite

NASA’s breakdown of the makeup of our universe

Dark Energy via NASA

Kirshner, Robert P.  “Hubble’s Diagram and Cosmic Expansion.”  In Proceedings of the National Academy of Sciences of the United States of America 101.1 (Jan. 6, 2004), 8-13.  http://www.jstor.org/stable/3148363 [accessed 2 December 2013].

McLennan, Evan. Cosmological Evolution: Critical and Constructive. 2nd ed., Gazette-Times Press: Corvallis, OR, 1916.

Pickover, Clifford A. Archimedes to Hawking: Laws of Science and the Great Minds Behind Them. Oxford UP: NY, 2008.

Sabra, A. I.  “Configuring the Universe: Aporetic, Problem Solving, and Kinemaic Modeling as Themes of Arabic Astronomy.” In Perspectives on Science 6 (1998), 288-330.  Retrieved from http://www.mitpressjournals.org/loi/posc [accessed Oct. 4, 2013].

Shank, Michael H.  “Setting the Stage: Galileo in Tuscany, Veneto, and Rome.”  In The Church and Galileo, 57-87.  Edited by Ernan McMullin.  Notre Dame, IN: U of Notre Dame P, 2005.

Sharratt, Michael.  Galileo: Decisive Innovator.  New York: Cambridge U P, 1994.

Smith, R. W.  “The Origins of the Velocity-Distance Relation.” In Journal for the History of Astronomy 10.29 (Oct 1979), 133-165.

Westfall, Richard S.  Essays on the Trial of Galileo.  Vatican City: Vatican Observatory Foundation, 1989.

…and class notes from a class on Ancient Astronomy I took with Prof. James Evans.

Intro Music: ‘Better Times Will Come’ by No Luck Club off their album Prosperity

Filler Music: ‘Epigram’ by Tycho off their album Dive

Outro Music: ‘Fields of Russia’ by Mutefish off their album On Draught

[onlinecarbide]

Are You Looking For Drill Mills For Sale?

Machining custom components with a milling machine is an amazingly precise yet time consuming process. One way to cut down on the operating time it takes to mill components is to limit the number of tool changes that are required. Drill mills are one of the most versatile milling tools out there and their unique design makes it easy for them to perform a list of tasks that would normally require several types of specialized end mills. Finding reliable drill mills for sale is a great way to speed up your production process.

Just like its name suggests, a drill mill is a tool that combines elements of both traditional side cutting end mills and axial cutting drill bits. The flutes of these tools are designed with the same profile as end mills, which makes them capable of performing side milling operations. What makes these tools truly unique is their sharp points, which are very different from the traditional square and ball ended designs employed by most end mills.

Because of their flute construction, these tools can be used to perform simple cuts. Because of the pointed tip, several passes would be necessary to cut out large areas. Their point does make these cutters unique suited to machining v shaped notches in your workpieces. Their points also make it possible for drill mills to perform some drilling operations, a task that end mills are not well suited for. The point of a drill mill can easily drill small holes or be used to spot drill to mark the location for deeper holes to be drilled. The pointed tip can also be used in place of a chamfer mill for applications like chamfering, beveling, and deburring your workpieces.

If you are looking to get the most out of your drill mills, you need to consider their construction. The best cutting tools will be constructed from solid carbide tool stock. Carbide is more rigid than steel and much more resistant to fatigue, meaning carbide tools can run faster and last longer than their counterparts. These end mills are even more resistant to high temperatures than high speed steel alloys. In order to give these tools some extra heat resistance, many manufacturers coat their tools in a layer of titanium aluminum nitride. This dark grey coating helps to provide extra heat resistance by forming an insulating layer of aluminum oxide at high temperatures.

If your shop is searching for some high quality drill mills for sale, you need to check out Online Carbide. They are an American manufacturer of high quality cutting tools machined from micro-grain tungsten carbide tool stock. Their inventory includes end mills, drill bits, and drill mills for sale at amazing manufacturer direct prices. You can see all of their amazing products at www.onlinecarbide.com. If you have any questions about their tools, feel free to reach out to a member of their team by sending an email to sales@onlinecarbide.com.

[shunlongwei]

Sell Infineon BSM200GB60DLC New Stock #BSM200GB60DLC Infineon BSM200GB60DLC New 200A/600V/IGBT/2U;IGBT Modules 600V 200A DUAL , BSM200GB60DLC pictures, BSM200GB60DLC price, #BSM200GB60DLC supplier ------------------------------------------------------------------- Email: sales@shunlongwei.com https://www.slw-ele.com/bsm200gb60dlc.html ------------------------------------------------------------------- BSM200GB60DLC Manufacturer: Infineon Product Category: IGBT Modules RoHS: YES Brand: Infineon Technologies Product: IGBT Silicon Modules Configuration: Dual Collector- Emitter Voltage VCEO Max: 600 V Collector-Emitter Saturation Voltage: 1.95 V Continuous Collector Current at 25 C: 230 A Gate-Emitter Leakage Current: 400 nA Pd - Power Dissipation: 445 W Package / Case: 34MM Maximum Operating Temperature: + 125 C Packaging: Tray Maximum Gate Emitter Voltage: +/- 20 V Minimum Operating Temperature: - 40 C Mounting Style: Screw Factory Pack Quantity: 10 200A/600V/IGBT/2U;IGBT Modules 600V 200A DUAL Shunlongwei Inspected Every BSM200GB60DLC Before Ship, All BSM200GB60DLC with 6 months warranty. Part Number Manufacturer Packaging Descript Qty T494C226K020ASKEMET CorporationTantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 10% +Tol, 10% -Tol, 22uF, Surface Mount, 2413, CHIP 699 PCSTNETD4020PZTITQFP 703 PCSTDE1898RDPSTDIP80.75A BUF OR INV BASED PRPHL DRVR, PDIP8, MINI, DIP-8 34788 PCSSPX385AM-5.0/TRSIPEXSOT23-3 1090 PCSHZU3.9B1TRF-ERENESAS8053.835V, 0.2W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE 12004 PCSMA736-PANASONICSMA 52721 PCSFS6377-01GONSOP16Clock Generator, 150MHz, CMOS, PDSO16, 0.150 INCH, GREEN, SOIC-16 779 PCS74VHCU04MTCFSCSSOP-14Hex Inverter, 2350-TUBE 1138 PCSB32561J3474K289EPCOS680BOXCAPACITOR, METALLIZED FILM, POLYESTER, 250V, 0.47uF, THROUGH HOLE MOUNT, AXIAL LEADED 770 PCSZMV833ATCDiodes IncVariable Capacitance Diode, 33pF C(T), 25V, Silicon, Hyperabrupt, MINIATURE PACKAGE-2 978 PCS

[waterproofmotore-blog]

The motor with the lead cable and wire can be directly.

View 1. Carefully check the nameplate data to confirm that the motor model meets the application requirements. 2. Use a 500V megohmmeter to measure the insulation resistance of the motor windings to the shell. The insulation resistance should be greater than 0.5M \u0026 Omega ;. 2. Equipment 1. Motor-like equipment In indoor clean and boring places, the surrounding area must be well ventilated. The maximum temperature of the ambient air should not exceed 40 ° C, and the minimum temperature should not be lower than -15 ° C. It should prevent intense heat radiation. 2. According to the wiring diagram, the connection of the power line terminal should be fastened. The motor with the lead cable and wire can be directly connected to the power line, and the joint must be insulated and sealed. 3. When the power line, phase sequence and the electric rough wire terminal are connected correspondingly, the motor rotates clockwise from the shaft extension. When the steering needs to be changed, the orientation of the wiring of the two power lines can be changed. 4. YD series and other variable-speed multi-speed asynchronous motors use the method of changing lead wires to control the speed change. In order to ensure the reliability of multi-speed motors, pay attention when planning and operating the control equipment.

When switching from high-speed to low-speed It is necessary to disconnect the neutral point of the 2Y wiring at the time of blocking the power supply to prevent the power supply from short-circuiting when the low-speed winding is turned on. In the process of switching from high-speed to low-speed, the power of the low-speed winding must be continued after the motor is stopped to reduce the impact on the motor and the load. Pay attention to the steering of the motor when switching speed. 5. The motor can be equipped with a coupling, gears, belts are mechanically connected to the load. A 2-pole motor with a power of 4kw or more and a 4-pole motor with a power of 30kw or more should not be driven by a belt. The second shaft extension of a two-shaft electric motor can only use a coupling transmission. The cooperation between the coupling, the shaft hole of the pulley shaft and the motor shaft should be appropriate, and it is strictly prohibited to strike with a hammer when the equipment. When the coupling is selected for transmission, the centerline of the motor shaft and the centerline of the load mechanical shaft should coincide, and the coupling should keep a gap of 1-3mm in the axial direction. When a belt is used to convey the room movement, the centerline of the motor shaft should be parallel to the centerline of the load mechanical shaft, and the belt centerline and the shaft centerline are perpendicular to each other. Third, fan motor suppliers the grounded motor must be firmly grounded. The grounding method and grounding resistance should comply with the rules for electrical safety such as the 'grounding design specifications for industrial and civil power installations' and 'factory power design technical specifications'. The grounding resistance is less than 4 \u0026 Omega ;. 4. Starting 1.

The motor should start immediately after closing, reach normal speed and run smoothly; otherwise, Pik immediately shuts off the power supply to check and eliminate the fault. 2. Pay attention to the investigation of motor drive equipment, load machinery, voltmeter and ammeter after starting. If there is abnormal phenomenon, stop the machine immediately. 3. The continuous start of the motor under no load generally does not exceed 4 times, and the continuous start after running to a hot state shutdown shall not exceed 2 times, otherwise it is easy to burn out the motor. 4. According to the grid capacity, load size and motor power, etc., a reasonable starting method should be selected. For larger power motors, a triangular method or a step-down method should be used to start. V. Operation 1. The error between the power supply voltage and the additional voltage does not exceed 5%, and the three-phase voltage imbalance does not exceed 1.5%. 2. The running current of the motor must not exceed the extra current on the nameplate, and the unbalanced amount of the three-phase current does not exceed 80%, otherwise it will cause the motor to heat up and even burn. 3. Use a thermometer to measure the surface temperature of the motor casing should not exceed 80 ° C, and the temperature of the bearing should not exceed 95 ° C. 4. The motor should always be kept clean, dry and well ventilated, and the air inlet and air outlet must be kept clear. 5. During operation, the motor exhibits smoke, severe vibration, abnormal sound, special smell, and significant decrease in speed; the load equipment appears to be faulty; it should be powered off and shut down when an electric shock occurs. 6. Smooth bearing 1. The smoothness of the motor bearing should be outstanding. Generally, after 3000-5000 hours of operation, the machine should be shut down to repair or replace the smooth grease. The smooth grease grade is ZL-3 lithium-based smooth grease. 2. Check the smooth condition of the bearing before using the motor that has been stored or deactivated for more than two years. Make up or replace the smooth grease if necessary. 3. Sealed bearings for frame size motors with a center height of 132 and below, and frame size motors with a center height of 160 and above generally use unsealed bearings. Sealed bearings do not need to be replaced with smooth grease during the use of the motor. Non-sealed bearings should be regularly replaced with clean smooth grease.

[bearingsupplier-blog1]

Take you to know full cylindrical roller bearing and bearing dimensional tolerance

Full loaded cylindrical roller bearings are designed to withstand heavy loads. In the same width, compared with the traditional bearing with cage, this bearing has high bearing capacity, small radial section, which can save space, but the speed is relatively low. In order to make the bearing work normally, under the condition of continuous operation, the bearing must bear a certain minimum load, that is, C / P < 25. Otherwise, the wear will be increased due to insufficient lubrication and high-speed operation. All multi row cylindrical roller bearings have a lubricating groove and a lubricating hole on the outer ring. NSK 35bd5220 Bearing

The types of full loaded cylindrical roller bearings are divided into single row full loaded roller bearings and double row full loaded roller bearings. Let's have a look.

Single row full loaded cylindrical roller bearing

The single row full loaded cylindrical roller bearing can bear a large radial load, and also can bear a single direction axial load. The axial positioning can be ensured by a symmetrical layout of similar bearings.

The inner ring of NCF 29V and NCF 30V series bearings has two fixed stops and the outer ring has one stop. They can only bear the axial load towards the fixed stop of the outer ring.

Nj23vh series bearings can bear the axial load towards the inner ring flange direction, and their rollers are fixed in the outer ring, even if the inner ring is removed, they will not come out. In this way, when the two ferrules are tightly matched, they are easy to be installed and removed separately.

Double row full loaded cylindrical roller bearing

Double row full loaded cylindrical roller bearing can not only bear large radial load and axial load, but also bear overturning moment, so it is used as fixed bearing.

The outer ring of NNC 49v series bearing has a lubricating oil groove and several lubricating oil holes, which can also be lubricated in the shaft during operation. Both ends of nnf50b. 2LS. V and nnf50c. 2LS. V series bearings are sealed with contact type, and the sealing ring is filled with lubricating grease.

In the case of good service conditions, the grease can reach the working life of the bearing. The lubrication can be carried out through the lubricating oil groove and the lubricating oil hole on the outer ring. If the same several bearings are installed on a shaft, the speed of the outer ring can be different because the outer ring is narrower than the inner ring.

This is a bit suitable for pulley mechanism. In order to make the pulley easy to be fixed on the outer ring of the bearing, there are ring grooves at both ends of the outer ring of the bearing which can be installed with circlips.

Dimensional tolerance of full cylindrical roller bearing

The dimensional tolerance and geometric deviation of full loaded cylindrical roller bearing shall conform to the tolerance grade P0 of GB / t307.1-94 (iso492-1994), and the normal original radial clearance Co, or the bearing with C2 to C4 original radial clearance can be required.

However, when ordering, the corresponding suffix shall be added after the bearing code. C3 group clearance is generally selected for rubber plastic screw extruder. The matching tolerance can refer to the selection principle of bearing pedestal tolerance and the selection principle of shaft tolerance limit.

The bearing is allowed to bear certain axial load. Adequate lubrication is a prerequisite for bearing axial loads. The retaining edge of the unidirectional positioning bearing and the positioning bearing which bear the axial load must be fully supported.

When installing or disassembling cylindrical roller bearing, special attention must be paid. The installation or disassembly force cannot be transmitted directly through the cylindrical roller and the ferrule edge.