moldexpert-blog - Tumblr blog

[moldexpert-blog]

Mold Remediation by a Professional vs DIY (Do it Yourself) - Which is Better?

We’ve all thought that we can get things done on our own, and why wouldn’t we? We live in an information age, where everything is just one google search away from being learned. Who would go on to an inconvenient track of calling up a mold remedy professional? You’ll have to be available at the house to attend them, and pay them for some over-the-top equipment for just some insignificant design on the ground, right? 

Although to be fair, it’s more about saving money than any inconvenience for most people. Whatever the case may be, there are certain things that you can’t learn from the internet, swimming being the most obvious example. But is removing mold on your own is that big of a deal? Let’s find out by looking at the following parameters.

Quantity of Mold

DIY

You should bear in mind that you’ll have to figure out how much mold there is at your house. It’s easy to get rid of the mold if it’s simply out there in front of you, but then comes another problem - how can you be sure that that’s all the mold there is, and it hasn’t reached into the cracks and crevices of your walls? 

Professional

For a professional, it’s a piece of cake to find where the mold is, because duh, they’re the professional. They don’t just know how to track the mold at the most remote places in your house, but also have the right equipment to get rid of it, regardless of where it has spread. 

Cause of Mold

DIY

Mold thrives on moisture. All it takes is a damp spot in the house and mold will find a way to spread from there. So you need to not only get rid of the mold but also the cause of it. It could be your roof that started leaking, or your pipeline behind the wall. Whatever the case may be, how to get rid of the cause itself is another challenge that you’d have to take on.

Professional

If you were to hire a professional, they would immediately know where to look at, in order to find the causes of mold. With the help of their expertise, they would find the causes way quicker than you would and help you get rid of them right away.

Getting Rid of Mold

DIY

Provided that you could even find the cause of mold, getting rid of it is a completely different story. Depending on the type of mold, the areas it affected, and how long has it been present, your methods and practices may vary. Apart from mold removal equipment, you’ll also have to buy safety equipment so as to keep the mold from getting in contact with your body.

Professional

A professional will possess special equipment such as fumigation systems and protective suits to properly deal with the situation at hand. Not only that, but they will also have the means to test the mold before and after its removal to ensure that all spores are gone. 

Conclusion

There is no glory in being able to take the mold out on your own, nor should you try to pull off something so risky that it can cause some serious health problems. What you can do, instead, is hire a mold removal company. To find one is as simple as to google “Mold Tech Mold Removal Toronto” and you’ll be bombarded with a list of numerous services around you.

[moldexpert-blog]

Hiring a Mold Remediation Contractor vs Doing It Yourself (DIY) - What is Better?

Introduction

You must have stumbled upon news articles about how exposure to mold is dangerous but we don’t really know what it is. Mold is a type of fungi that has bacteria which can be found almost everywhere. Even though it plays an important role in nature as it breaks down dead leaves and plants, how it ends up being harmful (if found at your home) is an entirely different story.

It thrives in moisture and may usually seem harmless, but as soon as it finds that damp spot in your house, it will start growing by the means of spores. These spores will release into the air and inhaling it can cause some serious health issues. But here’s a concern - do you think you can prevent it on your own? Let’s find out.

So What Should I Do?

The answer to that question is simple, but all you have to do is check for these 3 factors below, in order to understand whether you can do it yourself or you would need to hire a mold remediation contractor:

Amount of Mold in Your Home

How much is too much? It’s actually not easy finding out what quantity of mold is a lot or a little, provided you even have the idea about all the mold there is, at your house. For all we know, it could be hidden in the cracks and crevices of the walls. 

If the house is properly ventilated, then the mold should die because of a lack of humidity. Like I said above, the problem arises as soon as the spores go airborne. If you aren’t sure about that, or anything else for that matter, then the first thing you need to do is hire a mold remediation contractor. 

The Cause of Mold

Mold thrives in humidity. What you need to find out is what’s causing this dampness in the first place. If you can find a way to remove the cause of dampness, by all means, you could do it yourself. If you have no idea, then you know what to do.

Hiring a Mold remediation professional would be the way to go in a situation where you can’t find the cause. Also, if you have a record of how long has the mold been existing and how much it has grown since then, it would be really helpful for the professional you hired.

Whether You Have the Necessary Tools for Mold Removal

Let’s assume you can find the cause of the mold, but if you aren’t sure whether you have the right tools to deal with it or not. Well, if you don’t have any idea, then in either of the cases you should leave it to the experts. Possessing not just the right equipment but also with the necessary expertise required to use them is a pre-requisite for mold removal.

If you don’t have the required knowledge, you might actually end up going to Google and look for the right solution to your problem, but bear in mind that you’re risking a lot more than just your health, which is already at stake.

Conclusion

The bottom line is that it’s always better to be safe than sorry, and you might not want to risk things. If you can afford to have an internet connection to Google, you might as well hire MoldTech Toronto Mold Removal Company that will provide you with all the professional guidance, tools, not to mention, the competent resources to get the job done.