homegiraffe1

[homegiraffe1]

Timber Floor Sanding & Polishing Adelaide

Chairman of the Boards can repair your timber floor or replace it with a new one. We can assess and advise you on your best course of action.

HOME GIRAFFE's insight:

Sanding And Polishing Timber Floors

Timber floors are beautiful, but no matter how well you clean them, eventually they will need sanding and polishing to restore their original shine and beauty. Here is a guide on how to sand and polish timber floors:

Sanding

You will need a drum sander, an edge sander, and sandpaper discs which can be found at most tool hire stores. As a floor sander is very loud to operate, you will also need ear protection.

In order to get the best results you will have to repeat the sanding four times, starting out with 40-grit sanding discs and gradually increasing the grit to 60, 80, and finally 120-grit discs. When using a drum sander there are a few basic rules that should be followed for satisfactory results:

• Always lower the sander and disc slowly onto the floor. • As soon as the disc hits the floor, move the sander forward slowly to prevent it from digging into the timber. • Always sand along the grain of the timber. • While sanding, move forward only. Never turn the sander or back up while the sanding disc is in contact with the floor. • Sprinkle kerosene onto the floor in front of you periodically as you go to prevent the natural oils from the timber from clogging the sandpaper discs. • Check the floor for any exposed nail holes and fill them with timber putty that matches the colour of the timber. Allow at least 30 minutes before continuing with a 60-grit disc, gradually increasing to a 120-grit disc. • Sand the edge of the floor with an edge sander and a 60-grit disc.

Polishing

Polyurethane is the most widely used finish for timber floors. Once it has dried, it is perfectly safe, however, while being applied it gives off highly toxic fumes. Makes sure that the area is well ventilated and wear protective eyewear, gloves, and a respiratory device recommended for use with toxic chemicals.

Oil-based resins are a popular option and less hazardous; however, they are not as hard-wearing as polyurethane finishes.

Floor finishes are available in matt, semi-gloss, and high gloss finishes.

1. Use a soft cloth and methylated spirits to remove any oil residue lifted to the surface during sanding. 2. Use a brush to apply a coat of polish around the edges of the floor. 3. Using a roller, apply an even coat of polish, working along the grain of the timber. 4. Allow it to dry for at least 8 hours. 5. Lightly sand again with a 120-grit disc. 6. Remove the dust residue and apply a second coat, allowing it to dry overnight. 7. A third coat can be applied if necessary. 8. Allow at least three days for the floor to dry completely before walking on it.

The entire process will take at least three days. Doing the job yourself may save you money but remember to factor all the costs of purchasing the supplies and hiring the equipment and safety gear into your estimate. For guaranteed results hire a professional timber floor polishing company. You may be surprised to discover how affordable their services are and you will save the time and hassle of doing everything yourself.

[homegiraffe1]

Timber Floor Sanding Experts

Chairman of the Boards can repair your timber floor or replace it with a new one. We can assess and advise you on your best course of action.

HOME GIRAFFE's insight:

Tips For Sanding and Polishing Your Timber Floor

Apart from keeping the timber flooring clean, sanding and polishing are vital if you wish to keep it glaring. However, these two procedures can be tricky, particularly for those who haven’t attempted them before. So, if you are contemplating sanding or polishing your timber floor, here are some tips that will help you succeed in the tasks.

Sanding

For this task, you will need a floor sander, ideally known as a drum sander, as well as an edge sander. You will also require sandpaper discs. These tools can be easily found in most hire shops. However, using a floor sander may call for ear protection as it gets pretty loud.

For a smooth finish, you will need to sand the floor four times. Utilize 40 grit sanding discs for the first attempt and then move up to 60, 80 as well as 120 sanding discs. Do not forget to check for nail holes when about to change the sandpaper from the 40 to 60 grit. If you notice holes, ensure to fill them will timber putty and allow it to set for half an hour before you continue. Ideally, make sure the putty matches the colour of the floor.

  When you start using the sanding disc, ensure you begin moving the floor sander forward. Do this gradually and avoid turning the sander while the sandpaper disc is still touching the floor. Just move forward.

  The drum sander will be incapable of reaching the edges of the floor and this is where the edge sander comes into the picture. For the edges, you should use the 60 grit sandpaper disc, followed by 80 grit to ascertain a smooth finish.

Polishing

More often than not, oil-based resins and polyurethane floor finishes are used for timber polishing. When using the latter, ensure you wear protective eyewear and gloves. Ideally, use a respiratory device as the fumes tend to be quite toxic. Oil-based resins do not pose such health risks, but they are less hard wearing.

Floor finishes ideally come in glossy, semi-glossy and matte textures. If you are working on a high-traffic timber floor, avoid going for the glossy type as it tends to show scratches easily.

Before you polish the floor, ensure you wipe the surface with methylated spirits and cloth. Use a roller to ascertain an even coat and for the edges, use a brush.

Allow the initial coat to dry for 8 hours and then lightly sand it with 120 grit sandpaper before applying the second. The second usually dries overnight and you may apply the third one if necessary.

[homegiraffe1]

Timber Floor Sanding & Polishing Services

Chairman of the Boards can repair your timber floor or replace it with a new one. We can assess and advise you on your best course of action.

HOME GIRAFFE's insight:

Proper Sanding and Polishing Adelaide can Give Your Timber Floor A Rejuvenated Look

Timber floors will require some major maintenance after some time and this can be achieved by sanding and polishing them. An old timber floor gets a new look once it is properly sanded down, and polishing renews the luster that it originally had.

The process must start with preparing the floor for sanding, whether you do it manually with sandpaper or use machines. Timber flooring is likely to have nails used for their original installation, and some of these nails can come up above the surface after the floor has been in use for some time. You have to make sure that every nail is pushed down below the surface with a nail punch and hammer so that it will not protrude and rip the sandpaper. You can also make repairs to any holes, dents or nicks with timber putty and sawdust.

The first grade of sandpaper used manually or in the machine must be of a rougher texture, depending on the condition of the floor. The drumhead of the machine must rest on the floor before it is switched on, and the sanding action must be in the direction of the grain on the timer boards making up the flooring. Move forward in one row, complete it, and then start again on the second row, with a slight overlap. When you get near the skirting, you may require an edge sander, with a finer grit of sandpaper. If you are using a sander, make sure that you wear proper goggles, dust masks, and ear muffs if necessary. See that the room you are working on is well ventilated. Vacuum the floor to remove all dust before you start the next step.

Change the sandpaper to a medium grade and repeat the entire process. Clean up and finish the sanding with fine paper till you get a fine and polished feeling when you run your hand over the floor. The floor then needs to be cleaned very thoroughly of any dust and wiped over with a cloth that is just moist, and then allowed to dry thoroughly. Floors can then be polished or coated with any other floor finish. Water-based polyurethane is the easiest way to apply a finish polish coat on a timber floor. It dries up quickly and will allow you to apply all the required three coats of finishing in just one day.

Your floor should be ready for use within a day after the polish has completely dried up.

[homegiraffe1]

Palm Shaving and Trimming in Adelaide

Need your palm trees pruned? get an expert to do it the right way.

HOME GIRAFFE's insight:

Palm Tree Removal And Palm Shaving - What You Need To Know

There is no question that palm trees can provide a pleasant atmosphere. But they can also turn into a burden if not properly pruned and cared for. More specifically, they lose their aesthetic charm when dead leaves and overgrown bark become the focal point. And this is why professional palm tree removal and palm shaving services can be very helpful.

But to get some perspective on why this type of service should be of any value to you, think about the following:

Palm Tree Removal And Shaving Professionals Have Experience

Having experience with palm tree removals and shaving not only makes it easier but a lot quicker. In other words, if you call professional that do this type of work on a daily basis, you can expect them to be quick and effective.

They know what to look for and how to approach it, meaning you don't have to.

Professionals Bring The Appropriate Tools

In order to properly remove or shave palm trees, the appropriate tools will be required. For example, support is required to safely scale the palm tree if shaving is the service you require. Plus, what tools do you use for shaving in the first place?

These are problems the professionals are going to worry about. And if they really are professional, they won't show up without the proper equipment.

They Assume All Risk

Always keep in mind that palm trees can grow to be quite tall. And due to the size and length of the tree, there will obviously be some degree of risk involved. The question is whether you want to take on the risk yourself?

An established palm tree removal and shaving service will have the necessary insurance in place, and it's to protect everyone involved, especially the client. In addition to being covered against accidents, professionals take all the risk so you don't have to.

Professionals Clean Up Afterwards

Lastly, professionals will never leave a job without cleaning up first. From shavings to dead bark or the palm tree as a whole, they will make sure everything is removed from your property.

Now, you can argue that you should save the money and do the removal or shaving on your own. But think about the time and possible equipment it will cost, not to mention the risk of suffering a serious, and possibly permanent injury. Why go down this road when you can simply contact professional palm tree removal and shaving services in your area?

[homegiraffe1]

Professional Palm Tree Removal in Adelaide

Palm tree removal experts

HOME GIRAFFE's insight:

Hiring Professionals For Palm Tree Removal And Shaving

Palm trees are beautiful and make any landscape look lovely. They are a great addition to the compound and are ideal for tropical climates. Palm trees can grow to be pretty tall and their fronds spread out far if they are not trimmed. these can tend to look ugly if left unshaven.

Palm Tree Shaving It is best to hire a professional palm tree shaving service to do the job. As much as it may look easy, trying to do the job yourself could lead to injuries and damage to property. You will know that it is time to shave your palm tree if you see the older fronds looking brown. This means that they are dead and should be removed from the tree.

It is best to call a palm tree shaving team when necessary because old fronds often attract birds to them. These could become a nuisance. Hiring a professional to do the job is best because they will have the tree looking neat and tidy. A professional palm shaving service will be able to take care of the stem when shaving so that it does not become damaged from accidental cutting.

Palm Tree Removal When it comes to palm tree removal. there are several factors that may influence the decision to remove the palm tree entirely. If the tree is diseased then you need to remove it. You can tell if your palm tree is sick by looking at the leaves. Discolouration is often a sign that the tree has been affected by a fungus. It will then slowly begin to die. A palm tree could also be getting in the way of power lines and affect the electrical equipment. Apart from these two reasons, you may want to remove the palm tree because you want to change your landscape.

When you decide to remove the tree, let the professionals handle the job. Palm trees can grow considerably deep roots. This is a problem if you are handling the tree on your own. The professional palm tree removal service will have the equipment that is necessary to remove the tree without damaging the yard or altering the landscape too much.

Due to the tall nature of the tree, it is not recommended to try doing the job without safety gear. A professional team knows the risks involved and will use all the required safety measures to remove the tree properly.

[homegiraffe1]

Palm Tree Pruning Palm Shaving and Removal

If you have palm trees that need to be pruned, we are the team for you. We can shave, sculpt and restore palm trees to their former glory.

HOME GIRAFFE's insight:

A Guide To Palm Tree Removal And Palm Shaving

Ranging from Sabal palms to Mexican Fan palms, each palm tree has a different appearance. As with all trees, the palm tree requires regular maintenance in order to remain aesthetically pleasing and healthy. The removal of dead palm leaves, also known as fronds, is a vital factor in maintaining a palm tree. Skinning or shaving the tree can also help a person remove unwanted dead leaves closer to the trunk; thereby, resulting in a smooth trunk surface which will enhance the tree's appearance. This article will provide information on palm tree removal and palm shaving.

Step #1: Identify The Type Of Tree

The first step to palm tree removal and shaving is to identify the type of tree. This can be done by contacting a nursery. Identification of the palm tree type is significant as some trees are self-cleaning, meaning that the dead fronds will fall off independently and skinning can damage the tree.

Step #2: Assessing The Trunk

Once you have identified the palm tree as one that does not self-clean, you should assess the tree to plan the shaving task. First, examine the dead fronds to determine how close to the trunk you are required to cut. Always avoid cutting the trunk as this can influence the tree's growth, health and physical appearance

Step #3: Shaving The Palm Tree

Once you have determined how you wish to shave the tree, you should pull the dead frond down using one hand and cut the base using the other using pruning shears or a saw. It is essential that you cut as close to the trunk as possible creating a 'skinned' or 'shaved' appearance.

Continue cutting each of the dead leaves off one at a time working your way around the tree. If you are able to, it is recommended that you begin removing leaves from the tree from the trunk top to the bottom. Not only is this more effective, but it can reduce the length of time spent on shaving. However, you should always choose the best method for you and your skill set.

While shaving the palm, it is advised that you place the dead fronds in a single pile or directly in a bin. This will make it easier for a final cleaning after the tree is shaved.

What About Palm Tree Removal?

While palm tree shaving can be beneficial to improve the tree's health, there are cases where palm trees need to be removed due to pest infestation. In these cases, it is recommended that you use the saw to cut the tree at its base.

[homegiraffe1]

Why it's important to hire a professional tree stump removal expert

This article is about the importance of hiring an expert in Adelaide when it comes to stump grinding or tree stump removal.

HOME GIRAFFE's insight:

Why Hiring Professional Tree Stump Removal And Grinding Services Is Important

Trees are very beneficial to the environment and to humans, which is why it is important to have them in the compound. However, sometimes trees get diseased and therefore must be cut down. At other times, they may be too close to the house such that they are a risk because rats, snakes, and other dangerous animals may get into the house by crawling up the tree. An overgrown tree could also interfere with power lines or the roots could damage pipes.

In this case, you will need tree removal services. They will have people who will cut down the tree properly and remove it from the compound. Most property owners believe that they can do the job themselves. While this may be the case, it is best to leave the tree removal and stump grinding to the professionals. Here are the reasons why you should always hire professional tree removal and tree stump grinding services.

They Have Proper Equipment This is important because they will be able to get rid of the tree without damaging the house or the roof. Felling a tree especially a big one is dangerous enough even with the proper equipment. Doing the job without enlisting the help of professionals will only be riskier. You could end up damaging the house, the roof or even the surrounding property. Professional tree removal and stump grinding ensure the job is done well and that no dangerous tree stumps are left on the yard.

Removal Of Dangerous Stumps Leaving tree stumps after the tree removal is another risk. You may not be able to remove a thick stump without professional tree removal services. When the stump is left, it could cause injuries to children and even adults who are in the yard. A professional tree stump grinding service will be able to get rid of a stump and make sure no one is hurt.

Covering Holes And Clearing The Yard After Removal A professional tree removal service has the skills and the means to remove all the tree parts from the yard after the tree removal process. They will also cover up the holes so that there is no chance of a person or a pet falling inside. Trees that have deep roots often leave deep holes. Tree removal services have proper cutting equipment that they use to chop the tree into pieces that are easier to remove from the yard.

[homegiraffe1]

Best Way to remove a tree stump

Great Article on tree stump removal

HOME GIRAFFE's insight:

Hiring Professional Tree Removal And Tree Stump Grinding Services

We all know how important trees are when it comes to producing oxygen. Not only do they do that, but they provide shade and a habitat for many animals. Trees can become too large at times, however, and pose a risk to various structures. When a tree is too large it can fall on a roof and cause damage. It can also have roots that are widespread and they could end up damaging pipes. A sick or dead tree also needs to be removed.

When this is the case, you will have to remove the tree entirely so as to protect the property. Proper tree removal is a process that requires careful execution, lest the branches fall on the house or people nearby and cause injuries. This is why it is advisable to call a professional tree removal and tree stump grinding service to do the job.

Tree removal requires the use of machines that the professionals will have. Once they have removed the tree, they will then chop off the stump using a tree stump grinder. The tree is cut off as close to the ground as possible so that a small part of the stump is left behind. Sometimes, the stump cannot be removed until the tree dries up. At times, the roots can be cut off to allow the tree stump to be removed before the roots dry.

This process can be handled by a professional tree removal and tree stump grinding team because they are skilled and trained to use the equipment. Hiring professionals guarantees that there is a reduced risk of damage to the property around the tree. The team will ensure that they know where the power lines and the piping is. This way, the tree will not damage them while being felled.

In addition to being equipped and being trained, professional tree removal services know how to remove the tree so that the yard does not get too damaged. Removal of big trees can cause damage especially if they have an intense underground root network. Experienced tree removal specialists should be able to tackle the issue and make sure the yard is left in good condition.

Once they have finished the process of tree removal they will cut the tree into pieces for easy transportation. Most tree removal services offer after-removal clean-up services where they also cover up any holes left during the removal.

[homegiraffe1]

Stump Removal Experts at Stump Grinding in Adelaide

Do you have a tree or stump at your residential home or commercial business that needs removing? then call us today for a free quote

HOME GIRAFFE's insight:

Professional Tree Stump Removal And Stump Grinding Services

When dealing with tree removal, there is also an aspect of dealing with the unsightly tree stump that results from tree felling. While in some cases you may opt to leave the stump as it, more often than not, stump removal is critical.

For starters, the stump will occupy space, whilst not providing any added benefit to your property, be it on the aesthetic front or on the functionality front. Stumps also create a huge hazard for people around the property. A stump sticking out of the ground is a tripping hazard at the very least, which increases the potential for injuries to occur. Stumps are also renowned to provide a habitat for the growth and proliferation of pests as such as ants, termites, beetles, and many other critters. Furthermore, stump removal prevents unwanted tree re-growth.

These and many other reasons make stump removal a priority after cutting doe a tree. However, it is not just a matter of removing tree stumps haphazardly. Although tree stump removal and stump grinding seem as typical endeavours that anyone can remove with a DIY guide and some rented tools, it is not. For the best results and the highest safety standard adherence, stump removal should be conducted by professional standards.

For starters, professions have an intricate understanding and experience in dealing with stump removal and grinding. They will create good, efficient, and safe plans on how to go about the project. This translates to faster stump removal and effective stump removal.

Furthermore, professional can handle tree stumps of any sizes. Whether your tree had an averagely sized girth, a small one or an extraordinary girth size, a professional arborist can handle any stump removal or grinding of any size. And while you might struggle to deal with the emerging difficulties, a professional has what it takes to get the job.

Another consideration to have in mind is the location of the stump. A tree stump that is located in tight spaces can difficult to deal with. This affects how the removal and grinding processes are done. It also affects the machines that can be used for the project. Professional arborists tend to have the full spectrum of tools to deal with any situation. As such, they will have the required tools to deal with tree stumps in confined spaces.

Importantly, professional arborists are licensed and insured. As such, should anything go wrong in the removal process, you and your property are covered.

[homegiraffe1]

Find the best concrete floor polishing experts in Adelaide

Get the look you have always wanted by having your concrete floors in your home, office or shed polished and looking as shiny as a diamond

HOME GIRAFFE's insight:

Find The Best Polished Concrete Flooring Experts In Adelaide

If you have been thinking about hiring a contractor to do polished concrete flooring, you will want to find an expert in the trade. This job is best left to only the best contractors, and finding one in the Adelaide area may seem hard. Luckily, you have found this article which includes tips to help you search for and find the best concrete flooring experts in Adelaide.

Ask around. Word of mouth advertising is the best way to find out about lots of different things. Ask your family, friends and co-workers if they know of anyone in the area that specializes in polished concrete. This is a great way to learn more about the contractors that do this flooring and what others think about them.

Search online for polished concrete flooring experts in Adelaide. This will give you a list of contractors around you that do this type of flooring. Look over the names and see if there are any that you recognize. Take a look at their reviews available on Google and see what past clients have to say about them. Take note of their phone number and contact them to see if they can give you an estimate for the work that needs done.

Make a post on Facebook asking for recommendations there. See what you can learn what people there have to say. Share your post in Facebook groups and see what people in the groups can tell you.

Now that you have read this advice, you will be able to find the best polished concrete flooring experts in the area. Start your search now and see who is recommended in Adelaide. You will be able to hire them and get the concrete flooring done just the way you expect and you will be pleased with the outcome.

[homegiraffe1]

What are the benefits of polished concrete flooring?

Get the look you have always wanted by having your concrete floors in your home, office or shed polished and looking as shiny as a diamond

HOME GIRAFFE's insight:

Adelaide Flooring Experts Can Tell You About The Benefits Of Polished Concrete

Polished concrete flooring is a brilliant solution. It's not just for commercial establishments and manufacturing facilities either. You will see this type of concrete in residential areas for a variety of different reasons. What space are you considering when it comes to polished concrete flooring?

The advantages make it a great choice for many reasons. Adelaide flooring experts can go over your options with you, and you can talk about designs and color choices that would outfit your space best. One company I took a look at features products that are known for their green qualities. That is something to consider if you are thinking about environmentally conscious solutions for your flooring needs.

If you look at the scientific makeup of ordinary concrete, there is dust pushed to the surface. With polished concrete, you don't have to worry about that. One other great benefit of this type of concrete is that it is highly stain resistant. It repels all kinds of contaminants, including oil, which makes it great for garage floors. Is that where you are thinking about having polished concrete installed?

It can also improve ambient lighting, which of course makes it great for certain types of facilities. It makes me think of a showroom floor at an auto dealership. Believe it or not, polished concrete is also supposed to be more slip resistant. Now, I really had a difficult time understanding how that would be the case.

This type of concrete is also cost efficient, and it's supposed to require less maintenance as well. Did you know it's supposed to be LEED friendly? Also, say you have an older floor? You could have that old concrete floor polished, and it would improve its condition. You could say it certainly beats having a new floor installed altogether, don't you think?

[homegiraffe1]

Polished Concrete Floor Prices in Adelaide

Get the look you have always wanted by having your concrete floors in your home, office or shed polished and looking as shiny as a diamond

HOME GIRAFFE's insight:

The Advantages Of Having Your Concrete Floor Polished

Polishing your concrete floor can be beneficial in many ways. In this article, we are going to look at how concrete floor polishing can benefit you. So, without further ado, here are the major benefits of polishing your concrete floor:

A polished concrete floor requires minimal maintenance A polished floor needs simple maintenance as it only requires water to look great for years. This is because of the fact that polishing a concrete surface makes it smooth making mopping and squeegeeing easier. So, if you would like your concrete floor to be easy to maintain, it may be good to consider polishing it.

A polished concrete floor is durable It is a fact that concrete on its own can last for a long period of time. However, polishing it makes a concrete floor more durable as chemicals that make concrete hardier and dust proof are added during the polishing process.

In fact, polished concrete floors are used in distribution centers, warehouses, and other buildings that undergo great wear and tear due to their durability. With proper simple maintenance, a polished concrete floor can outlast other flooring options and can help you save money in the long term.

Increased Cleanliness Polishing your concrete floor makes it resist substances such as chemicals, oils and other liquids. Keep in mind that concrete does not usually resist to compounds or chemicals it may come in contact with. Therefore, by polishing your concrete floor, you will be sure of having a cleaner and safer space.

Makes Your Floor Look More Beautiful Having your concrete floor polished can improve the appearance of your house. Many people with concrete floors have been able to make their homes look more beautiful by having their floors polished. This is because of the fact that polishing gives a concrete floor a certain shiny and attractive appearance.

Polishing Your Concrete Floor is A Green Building Solution This is because of two major reasons. First of all, polishing makes use of the existing substrate meaning that you will not have to throw away your existing substrate. Secondly, the maintenance of a polished concrete floor only requires water and there are no harsh chemicals required to clean this type of floor.

As you can see, there are many benefits of having your concrete floor polished. Therefore, if you have a concrete floor and would like to enjoy the benefits we just listed, it is good that you consider having it polished. Look for a reputable professional who specializes in concrete floor polishing to have this process done in the best way possible.

[homegiraffe1]

Concrete Floor Polishing Experts in Adelaide SA

Get the look you have always wanted by having your concrete floors in your home, office or shed polished and looking as shiny as a diamond

HOME GIRAFFE's insight:

Benefits of Polishing Your Concrete Floors

The floor is a space that experiences a huge deal of wear and tear. Whether it is as a result of vehicle traffic, foot traffic or a combination of both, polishing your concrete floors ascertains a couple of benefits. In this read, we are going to take a look at some of those benefits.

Polished Floors are Appealing

Concrete floors are known for their durability and hardness, but not for their aesthetic appearance. However, once they are ground and polished, they can lend an appealing, stain resistance and almost maintenance free, resembling terrazzo or marble.

Durability

Concrete is already known to be quite durable for a certain period, but when a concrete floor undergoes polishing, chemicals are added to the surface, which penetrates and react with the concrete properties, thus making it dustproof and hard. In addition, the polishing process calls for refinement of progressive diamond grits. This process refines the surface to be dense and very tight. Floor polishing is utilized in distribution centers, industrial manufacturing plants and warehouses, so the durability speaks for itself.

  Cleaner

With accidents and spills being a common thing in almost every concrete floor, it is essential to have an epoxy coat or have polishing done to them. Since concrete is a porous material, it’s not resistant to things like chemicals, oils and other liquids. However, with polishing, you will make your floors resistant to chemicals and compounds, meaning that they will be cleaner and safer.

  Environmentally Friendly

A polished floor is one of the most environmentally friendly flooring solutions. By polishing your concrete floors, you eliminate the materials and energy needed to install an alternative floor covering. The polished finish also increases light reflection, which in turn reduced your lighting costs. No coatings or waxes are needed on a polished floor, which further improves your carbon footprint and even reducing the costs of re-application.

  Safe & Hypoallergenic

Polished concrete floors have a high coefficient of friction, thus making them non-slip. As a matter of fact, the more shiny, the less slippery they become. The process ideally alleviates allergy and dust mite issues and doesn’t support the growth of mold. This makes concrete floor polishing excellent for both indoors and outdoors.

Excellent For Underfloor Heating

Concrete is an excellent conductor of heat and that’s what makes it ideal for underfloor heating. Yes, it may take a while to heat up, but once it’s heating, it retains the energy, significantly reducing your energy costs, while giving you those lovely warm floors.

[homegiraffe1]

Polished Concrete Floors in Adelaide

his is a great article I've found about concrete floor polishing.

HOME GIRAFFE's insight:

Benefits Of Polished Concrete Flooring in Adelaide

Concrete flooring is a preferred option for many homeowners. This is because concrete floors are more durable and less susceptible to damage (especially from weather and traffic) as compared to other variants. Concrete floors aren't meant for driveways alone; they are quite useful inside the house as well. Concrete floor polishing makes the floor even more durable and able to deal with wear and tear quite effectively. Outlined below are some of the reasons, and advantages of investing in a polished concrete floor.

1. They are easy to maintain A polished concrete floor has a harder surface as compared to traditional concrete. For this reason, polished floors do not scratch or wear out quickly even from the heaviest of traffic. This means you won't be carrying out repairs or filling out worn out patches any time soon. An occasional burnish and regular cleaning might be all you need to maintain the floor's beautiful and shiny look.

2. Cost Effective Compared to other flooring types, the polished concrete floor is considerably more affordable, and also does last longer than the more expensive options out there. If low-cost, quality, and durability is all you are looking for, then a polished floor might be all that you need. The best thing about concrete flooring is that it doesn’t have to be replaced quite as often as most other flooring options.

3. Easy to clean Polished concrete floors handle spills and stains much better when compared to flooring types with an absorbent material. Although concrete may not be naturally resistant to most chemicals, oils, and other corrosive liquids, it is one of the safer bets you can make. In addition to this, concrete polishing makes it less porous, a lot harder, and thus, much easier to wipe off most forms of stains, dirt, and spills. Cleaning a concrete floor is easy. All you need to keep the floor clean is mob the floor. High-pressure washers can also be used to clean large concrete floors as well. This leaves the space safer and cleaner for most applications.

4. Better Appearance Concrete floors produce a stunning look when polished. You can also choose between various shades for your floor, an added advantage for anyone looking for improved look and appeal, and synchrony to the home's interior design. You can even have different color themes on various rooms for better satisfaction.

If you have been looking for an affordable yet durable flooring option for your home, driveway, or an industrial warehouse, then polished concrete floor may be just the solution you need. You'll need an experienced and certified contractor to ensure quality job and value for your money.

[homegiraffe1]

Polished Concrete Adelaide | Concrete Floor Polishing Services

Get the look you have always wanted by having your concrete floors in your home, office or shed polished and looking as shiny as a diamond

HOME GIRAFFE's insight:

The Benefits Of Having A Polished Concrete Floor

What are the benefits of getting your concrete floor polished? Are you looking at having this done to your garage floor? Believe it or not, there are even residential properties where a floor like this is on the inside. That's not exactly the norm of course, but it's possible. And there are certainly commercial businesses that have this done because of the benefits.

When you look at the benefits of a polished concrete floor, you're going to see that there is actually an expected cost savings. You can expect the floor to last longer, too. That has everything to do with the floor holding up better, not easily being damaged. That's why commercial businesses often use this type of flooring surface because it's not as vulnerable to heavy foot traffic.

What's great about polished concrete vs regular concrete, too, is that it's said to be easier to clean. You don't have to worry so much about the dust, allergens and dirt in general. That's great, don't you think? Not only that, but polished concrete can come in a wide variety of designs and colors in general.

That gives you plenty of style choices, dressing up your space. There is less maintenance when it comes to this type of flooring, and that's great. It sounds like a win-win all the way around, especially if you really do get to enjoy a cost savings. There are other expected benefits, too.

For example, there is the fact that polished concrete is resistant to moisture as well. It also has a high light reflectivity. Now those are benefits that are often quoted to commercial customers who want this type of concrete in place, but they are also benefits that residential customers can enjoy as well.

Polished concrete flooring happens to be a sustainable alternative. The cost benefits and the fact that this type of flooring is highly durable sure does help indeed. The coatings aren't hazardous either, so you just get a really nice cover to your flooring that works like a charm.

If you have considered a polish to your concrete surface, reach out to contractors for a quote. You're going to really like what you discover. Remember, you're supposed to be able to save money, especially over the long term. This flooring should last longer, as you should be able to count on it looking quite nice for many years to come.

[homegiraffe1]

Steel Supplies Adelaide

Steel Supplies Adelaide

HOME GIRAFFE's insight:

What Are The Commercial Uses For Steel In Today's World?

What material do you think is the most used in the entire world? Not only is steel the material used most often, but it is also the material that is recycled the most as well. As you can imagine, that means that steel has quite a few applications. Are you interested in buying steel supplies for commercial use?

There are different types of steel available, and there are five primary commercial sectors. There are many more applications, but let's take a look at the five primary commercial sectors first. There is steel used for construction purposes, and there is steel used in the transportation business. That covers two sectors right there.

What are the other three? There is the energy sector, and there is also the packaging sector and the appliances sector. Which one of the above mentioned sectors do you think uses the most steel annually? The answer is overwhelmingly the construction industry.

If you are in the construction business and are looking to buy commercial steel products, you represent the largest niche sector. What about the other sectors? When looking at the transportation sector, you might be inclined to think that steel isn't used that often in the production of vehicles. It was decades ago when cars looked like they were 'steel strong.'

Nowadays, while cars don't appear that they contain a lot of steel, the material is still heavily used in their construction. Steel is also used in the infrastructure for the energy sector. You may not have known that steel was such a big part of the energy industry.

Think in terms of wind turbines and electricity pylons. What about those transmission towers and oil and gas pipelines? There are many reasons why steel is needed in the energy sector. Steel packaging and storage is also a big industry and its own sector, and of course, the appliances industry was also mentioned as its own sector.

If you look at the weight of appliances, 75 percent of that weight is said to be steel. I mention this number because you can compare it to the percentage of steel weight in automobiles. On average, that number is 50 percent.

What do you need steel for? Perhaps you were the first stop as mentioned, the construction business. Or maybe you fall somewhere in between, or do business in more than one sector. Steel touches all of our lives in some way on a personal level, and in some way, it also touches every commercial business industry in the world, too.

[homegiraffe1]

Steel Supplies | Steel Suppliers in Adeliade

Steel Supplies

HOME GIRAFFE's insight:

Buying Steel Supplies For Commercial Use

If you need steel supplies for commercial use, you need to know where to turn to get the best deals. You also want to know that the supplies are made well and will last. Here, you can learn a little more about commercial steel suppliers and what you can use them to help you with.

Suppliers need to be well reviewed before you buy anything from them. You want to know that they are going to be able to provide you with the best services and that they charge prices that are fair. When you want to find a review, just go to a search site and type in the name of the supplier along with the word reviews. Then, you're going to want to find the most up to date reviews that you can. You want to know what the company is currently like to work with in case they have changed things up over time.

Some uses for commercial steel include using it to build buildings and other things that surround commercial buildings. You want to use steel a lot of the time because it's durable and it will withstand the test of time. With steel you can use it as the backbone for a project and you will know that it's strong and will hold up as time goes on as long as it's quality steel. That's why you need to shop with suppliers that you know have quality steel, so you know that it will last quite some time for any way you use it.

You want to get the best prices from commercial steel suppliers. If you need a lot of steel for a project, you may be able to save some money if you buy in bulk. But, if you're buying a little at a time, then you should shop around a little just to find out who is going to give you a good deal. However, you don't want to just go with the cheapest supplier out there. You also want to make sure that the steel is high in quality because if it is it's worth the extra money.

Steel supplies for commercial use need to be high in quality and set at a fair price. There are a lot of great suppliers out there to select from. Take your time with this and you'll be happy with what you get out of your purchase.