gammax123

[gammax123]

Welding Procedures UK | Gammax

If your requirement is to obtain welding procedures and/or qualifications in accordance with BS EN ISO 15614, BS EN ISO 9606 or ASME IX then Gammax should be your first choice.

A Welding Procedure Specification is the formal written document describing welding procedures, which provides direction to the welder or welding operators for making sound and quality production welds as per the code requirements . The purpose of the document is to guide welders to the accepted procedures so that repeatable and trusted welding techniques are used. A WPS is developed for each material alloy and for each welding type used.

Website: https://gammax.co.uk/weld-procedures/

Contact: 01284 850 888

[gammax123]

Magnetic Particle Inspection UK | Gammax

Magnetic particle Inspection is a non-destructive testing (NDT) process for detecting surface and shallow subsurface discontinuities in ferromagnetic materials such as iron, nickel, cobalt, and some of their alloys. The process puts a magnetic field into the part. The piece can be magnetized by direct or indirect magnetization. Direct magnetization occurs when the electric current is passed through the test object and a magnetic field is formed in the material.

Website: https://gammax.co.uk/magnetic-particle-inspection/

Contact: 01284 850 888

[gammax123]

Magnetic particle inspection in UK - Gammax

Magnetic particle inspection is a fast, extremely sensitive, easy to apply method that can be applied to ferritic components over a wide range of surface temperatures (up to 315 degree C with no lower limit). It is relatively unaffected by poor surface conditions.

Website: https://gammax.co.uk/magnetic-particle-inspection/

Contact: 01284 850 888

[gammax123]

Weld procedure - Gammax

If your requirement is to obtain

weld procedures

and/or qualifications in accordance with BS EN ISO 15614, BS EN ISO 9606 or ASME IX then Gammax should be your first choice.

Website: https://gammax.co.uk/magnetic-particle-inspection/

Contact: 01284 850 888

[gammax123]

Weld Procedures & Weld Coding | Gammax

If your requirement is to obtain weld procedures and/or qualifications in accordance with BS EN ISO 15614, BS EN ISO 9606 or ASME IX then Gammax should be your first choice.

All weld coding and qualifications are written under our UKAS accreditation to ISO17020 using Welding Qualifier software developed by The Welding Institute.

Website: https://gammax.co.uk/magnetic-particle-inspection/

Contact: 01284 850 888

[gammax123]

Magnetic Particle Inspection | Gammax

Magnetic particle inspection is a fast, extremely sensitive, easy to apply method that can be applied to ferritic components over a wide range of surface temperatures (up to 315 degree C with no lower limit). It is relatively unaffected by poor surface conditions.

Website: https://gammax.co.uk/magnetic-particle-inspection/

Contact: 01284 850 888