Accutherm International is Australian owned with strategic alliances with leading global gas technology and component companies. These highly engineered products are selected for those seeking superior quality and reliability.
Don't wanna be here? Send us removal request.
Text
Maxon COMBUSTIFUME Line Burner
COMBUSTIFUME Line Burners are designed for heating high temperature process air in motion and consist of a rust-resistant ductile iron or aluminumbronze body. This serves as the raw gas or air/fuel manifold, drilled to discharge the fuel/gas mixture between diverging stainless steel or Hastelloy-X mixing plates.
0 notes
Text
Belimo D(U)6 Series Butterfly Valve
Typical application include chiller isolation, cooling, tower isolation, changer-over systems, air handling unit, fan coil control, bypass and process control. More Details Visit Here
> 2-way butterfly valve flanged > Available from DN50 ~ DN500 > For two point or modulating control of cold, hot & sea water
0 notes
Text
Riello BP D.O Dual Fuel Burner
The BP D.O. DUAL 3 burner series is a forced-air design with pneumatic atomization. The dual fuel operation is suitable with natural gas, LPG, lean gas or gases with low calorific value (on request) with a light oil such as diesel or kerosene.
0 notes
Text
Pietro Fiorentini Norval Regulator
Norval pressure regulators are direct acting devices for low and medium pressure applications controlled by a diaphragm and counter spring.
0 notes
Text
Honeywell ControLink Q7999 Wiring Subbase
The Q7999A is a universal wiring sub base for the R7999 ControLinks Controller. The wiring sub base provides terminals for field wiring. Terminals located on the R7999 ControLinks Controller engage the Q7999 contacts to make electrical connections.
0 notes
Text
Honeywell ControLink R7999 Fuel Air Ratio Controller
The R7999 ControLinks. Controller uses the latest microprocessor-based technology to simultaneously control up to four actuators. The device, when used with the ML7999 Universal Parallel Positioning Actuators, represents a value-added replacement of mechanical cam and linkage assembly controlling the relationship between fuel, airflow and flue gas recirculation (if used) on a power burner. The Honeywell ControLinks. System consists of the R7999 ControLinks. For More Details Visit Here
0 notes
Text
FMG FMR Rotary Meter
The FMR series of rotary gas meters are designed to meet the highest demands of reliable and accurate measurement of gas flow. There compact exchangeable aluminum cartridge allows local repair and on-site cleaning. Installation stresses caused by connecting piping are minimal due to the robust design and construction of the casing and cartridge.
0 notes
Text
Maxon MG Mixing Tubes
Mixing tubes are available for mixing of air/natural gas, tubes with special inserts for air/LPG, on request tubes for any other combination of gasses are available.
0 notes
Text
Eclipse AirHeat V2 Burner
AirHeat Burners are ideal for generating a large volume of clean, hot air. As a packaged line burner, Eclipse AirHeat burners are ideal for generating a large volume of clean, hot air. Applications include ovens, dryers, fume incinerators, and similar industrial equipment. In addition, the AirHeat burner can also be ordered without a blower for use in re-circulating air applications.
0 notes
Text
Honeywell Safire BC Series Flame Switch
The Safire BC1000 Flame Switch is for monitoring the flame in gas or oil burners in intermittent operation. Four models are available with integrated amplifier for use with a UV detector or flame rod. Models available with SPDT relay output with a 1s Flame Failure Response Time (FFRT) and SPST relay output with a 3s FFRT.
0 notes
Text
Maxon OXY-THERM LE Gas Burner
OXY-THERM LE Gas Burners provide the lowest NOx levels of any industrial oxygen/fuel burner, regardless of oxygen purity. NOx levels are up to 70% lower than conventional oxy-gas burners and up to 50% lower than conventional oxy-oil burners.
0 notes
Text
FEMA KSW Air & Liquid Flow Switch
KSW series is highly reliable, compact electronic flow switches are designed for detecting the flow of water and/or air in ducts or pipes. As soon as the medium's flow speed rises above or drops below a customer-selected value, the device switches an electronic circuit.
0 notes
Link
0 notes
Link
Gas Metering - Elgas S.R.O. Three Way Valve. Three-way cock with hand level control DN 3 PN 100 Suitable for all liquids and gases non-aggressive towards material seal NBR.
0 notes
Link
E3Point is a toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people and property.
E3Point is capable of detecting the widest range of toxic and combustible gases found in commercial building spaces, including CO, NO2, O2, H2, H2S, CH4 and C3H8. It can be used as a standalone unit with single or dual-gas detection (i.e. using a remote sensor) or deployed as a networkable device (interoperable with BACnet, Modbus or other Building Automation System); E3Point also functions with existing controller-based gas monitoring systems and wired gas monitoring system components.
0 notes
Link
Rugged and reliable, the GasAlertQuattro four-gas detector combines a comprehensive range of features with simple one-button operation. With flexible power options, the GasAlertQuattro is always ready. The graphic LCD displays easy to identify icons that indicate operational information, such as bump test and calibration status for simplified onsite auditing. IntelliFlash provides continuous visual confirmation of detector operation and compliance. Suited to a wide range of industrial applications including confined space entry, the GasAlertQuattro is fully compatible with BW Technologies by Honeywell's MicroDock II automatic test and calibration system.
0 notes
Photo
Riello RL/M Series Package Light Oil Burner Supplier in Australia
The RL/M series of burners covers a firing range from 166 to 2431 kW, they have been designed for use in hot or superheater water boilers, hot air or steam generators, diathermic oil boilers. Operation can be two-stage progressive or alternatively modulating with the installation of a PID logic regulator and respective probes. RL/M series burners guarantees high efficiency levels in all the various applications with reducing fuel consumption and running costs. Optimisation of sound emissions is guaranteed by the use of fans with forward inclined blades and sound deadening material incorporated in the air suction circuit. The exclusive design ensures reduced dimensions, simple use and maintenance. A wide range of accessories guarantees elevated working flexibility.
0 notes