Text
Information required for IC-ID certification:
1. Circuit block diagram (including crystal vibration position, oscillation frequency)
2. Circuit diagram
3. Job description of the circuit
4. Instructions for use
5. Antenna gain
6. Applicant contact person, position, E-MAIL, applicant code click to download the application form
7. Canadian agent contact person, position, contact information
0 notes
Text
What is the IK Grade
0 notes
Text
Standards and regulatory requirements for electric toys:
International standard: IEC 62115:2003 + A1:2004 + A2:2010
EU: EN 62115:2005 + A2:2011
United States: 16 CFR 1505:2009
China: GB 19865:2005
Australia: AS / NAS 62115:2008
0 notes
Text
The power supply module LVD test with switching power supply LVD test items are:
1. Enter test
2. Power test
3. Temperature-rise test
4. Overload test
5. Leak current test
6, Tide test, etc
0 notes
Text
Testing standard for mobile lamps:
IEC/EN 60598-2-4/GB7000.204
0 notes
Text
Bluetooth Product TELEC Certification Test Program:
1.Frequency Error Measurement
2.Occupied Bandwidth and Spread-spectrum Bandwidth / Factor
3.Unwanted Emission Intensity Measurement
4.Antenna Power Error Measurement
5.Limitation of Collateral Emission of Receiver Measurement
6.Transmission Antenna Gain (EIRP Antenna Power) Measurement
7.Transmission Radiation Angle Width (3dB Beamwidth) Measurement
8.Duty Cycle Measurement
9.retention time
0 notes
Text
Information required for wireless charger CE-EMC certification:
1. Generally, 2-3 test samples;
2. Circuit schematic diagram;
3. Product specification or operation manual;
4. Application form (the form is provided by our company);
5. Parts list (BOM form).
0 notes
Text
ROHS certification is not strictly a certification, but a chemical test, the charge standard is to see the material of the product.
The difference between China ROHS and the EU ROHS is that China ROHS only tests six harmful substances, while the EU ROHS tests ten harmful substances.
Four more than benzene tests.
0 notes
Text
Safety Regulation Testing
0 notes
Text
A series of safety tests that simulate the use of electrical products are called Safety Compliance Testing.
Safety Compliance Testing mainly emphasizes the safety protection of the users, we operate electrical products convenient at the same time not hurt by electrical appliances.
Assuming that some or all functions of the electrical products are lost in use, and it will not bring danger to the users, then we judge that the safety design of the product is qualified.
0 notes
Text
Temperature shock test is to determine the environmental adaptability of the product to be stored, transported and used in the climate environment with rapid temperature change. Under the condition of instantaneous change of high temperature and low temperature, the physical and other related characteristics of the product can be simulated to determine whether the performance of the product can still meet the predetermined requirements for product design, improvement, identification and delivery inspection. At the same time, the reliability of the product can be improved and the quality control of the product can be improved.
0 notes
Text
The CEMARK certification of electrical and electronic products is very useful for your business and to further improve the quality of your products.
Electrical and electronic mark according per LVD and / or EMC instructions.
LVD or LV equipment instructions applies to all electrical products operating in the range of 50 to 1000 AC and 75 to 1500 DC DC voltage.
EMC or electromagnetic similarity discusses the consistency of electromagnetic outflows for particular widgets.
0 notes
Text
Amazon FCC-SDOC Compliance Statement Applicable Product Range.
Importers and manufacturers of certain types of electronic products in the United States must issue a Supplier Compliance Statement (SDoC).
SDoC This is a self-issued statement, a way of showing that a product, process or service complies with standards or technical regulations.
Among them, the supplier provides a written guarantee to meet the specified requirements.
0 notes
Text
The main objectives of the plug and pull force test include: 1. Evaluation of the plug and pull performance of the connector or connector, and determine whether it can meet the design requirements; 2. Compare the plug and pull performance of different connectors or connectors, and select products with better performance; 3. Check the change of plug and pull force of the connector or connector after a long time of use, and evaluate its service life.
0 notes
Text
Wireless product CE Test Project:
Safety: Safety regulation test project
RF: RF test item (multiple RF reports for multiple wireless frequencies)
EMC: electromagnetic compatibility
Health: Safety assessment
0 notes
Text
How to apply for CPC certification
0 notes
Text
When selling a handheld mite remover at Amazon USA, you may need to provide a test report or certification that meets UL60335 standards.
The process of UL report includes the steps of application submission, product data submission, sample delivery testing, evaluation test and report issuance.
1 note
·
View note