uedlucks

[uedlucks]

KYN28A-12 MV switchgear will be ready soon

[uedlucks]

High voltage switchgear - KYN28A-12

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Prefabricated substation

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product Overview

 PZ30 modularize terminal combination appliance is one kind of device, The dimension modularize , orbiting installation , art up , safe , widely used at home and abroad .

 PZ30 suitable for the rated voltage 220V or 380V , Total load current not greater than 100A , The one phase , three lines and three phases five lines end circuit . Control the electrical equipment , One kind of complete set can protect the appliance against over load ,  short circuit , over voltage and leakage . Widely used in high-rise buildings, residences, stations, ports, airports, hospitals, theaters, large commercial outlets and industrial and mining enterprises

 Product Structure

 Main parts of PZ30 are transparent top cover , box body, mounting rail , conductive busbar, connector base , cable cover and electrical switch components , The size of appliance inside are all 9mm ,  install at the rail , can be combined according the requirements ,convenient

for assemble and disassemble . The switch handle is exposed , But the live part inside the cover ,easy for operation when open the cover , safe and reliable , There are the feed in terminal and feed out terminal at the top and bottom , left and right of the body , convenient for wiring .

 Regular Working Conditions

Ambient temperature : -50 ℃ ~  +40 ℃ ,  The average 24H temperature does not exceed  +36 ℃

The sea level height not above 2500m  

Relative humidity :   Not exceed 50% at 40 degree ,  There maybe condensation at lower temperatures if there is higher relative humidity .

Installation : Class II

pollution  : Grade 3

Contacts : 

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product Overview

MNS is one kind of modular and multifunctional low-voltage power distribution cabinet , applied in metallurgy, petroleum, industrial and mining enterprises and infrastructure and other fields where need the reliable Low voltage power distribution and motor control system .

MNS adopted cabinet structure which has  a high degree of flexibility

A variety of models and specifications of components can be installed in the cabinet according the client requirement or different use occasions .

Depending on the different types of electrical equipment, multiple types of feeder units can be installed in the same column or in the same cabinet . For example, The feed circuit can be mixed with the motor control circuit.

MNS  are  full range of low voltage switchgear for your different requirements , Suitable for the low voltage system below 6300A .

MNS provides high levels of reliability and safety, humanized design, enhance the protection required for personal security and equipment safety .

MNS has the fully assembled structure, and its unique profile structure and connection mode as well as compatibility with various components can meet the requirements of harsh construction and power supply continuity .

Standard :  IEC60319 、   GB7251.12 - 2013

Regular Working Conditions

Application:  power distribution and motor control

Ambient temperature : -5 degree ~ 40 degree

Relative humidity : Not exceed 50% at 40 degree ,  There maybe condensation at lower temperatures if there is higher relative humidity .

Installation position :  Indoor

Above sea level :  below 2500M .

Remarks: Client should feedback to the manufacture if the environment could not meet the above condition .

Technical Parameters

1. Line in and out

1.1   line in and out form:  cable / bus groove

1.2   Cable in and out :  Top/Bottom

1.3   Wiring form: cabinet front / cabinet back

1.4   Ingress Protection : IP30 , IP40 , IP50

1.5   Isolation form of functional units :  full or partially isolated

2. Dimension

 Height : 2200

 Width: 600/800/900/1000

 Depth: 600/800/1000

Surface treatment:   Electrostatic powder spraying

Electrical Data

3.1  Rated insulation voltage :  1000 V

3.2  Rated Operational voltage : 660V

3.3  Rated frequency :  50/60 HZ

3.4  Rated impulse withstand voltage : 8KV

3.5  Auxiliary circuit rated voltage :   AC380V  AC220V  DC220V

3.6  Overvoltage grade : III

3.7  Class of pollution : 3

3.8  Rated Current :  6300A

3.9  Horizontal busbar rated current : 6300A

3.10 vertical busbar rated current :  2000A  1000A

4   Horizontal busbar

4.1  Rated short-time withstand current     50/80KA

4.2  Rated peak withstand current             105/176KA

5.   Vertical busbar

5.1 Rated short-time withstand current      50KA

5.2  Rated peak withstand current          105KA

6. Ground System :  TT, IT, TN-S , TN-C-S

7.  Maximum  breaker :   4000 A

Structure and characteristics

1.  Cabinet Frame

1.1  The cabinet frame is made of special C type material (25mm), three-way connections , assembled by locking self-tapping screws and high strength bolts , There are various specifications , can combined to different cabinet frame according different cabinet and actual requirement .

1.2  The cabinet frame  made of  cold-rolled steel plate (thickness :  2mm)  or imported application with aluminum and zinc plate .

3...Cabinet body combination form

3.1  Drawer Cabinet (MCC)

A.   Drawer Cabinet is made of drawer , cabinet frame, and relative components , electrical elements are fixed in the drawer , There are the drawer unit specification :  8E/4 , 8E/2, 8E , 16E, 24E (E=25mm) ,  The same specification drawers can be easily interchangeable .

B .  The Rated Current of Drawer up to 400A , Every device can contain 9 pcs 8E drawer , It can be combined into up to 36 circuits .

3.2  Fixed Switchgear

These kind of switchgear can be used as incoming cabinet, outlet cabinet , capacitor cabinet , frequency converter cabinet, soft starter cabinet, Etc

3.3  Mixed Switchgear

A. The drawer unit and fixed unit can be mixed to one cabinet frame .  Can be combined according each unit 8E .

B. It can be used for the occasion there are both electric circuit and motor control circuit  .

Fixed partition cabinet

A: The circuit units are isolated from each other and plug-in or withdrawable circuit breaker is adopted to ensure the convenience equipment maintenance and repair .

B . Mainly applied to power distribution circuit , as well as some larger power motor control circuit .

Horizontal busbar

4.1 Horizontal busbar of switch cabinet arranged at the busbar chamber , can place in the back or top of the cabinet

4.2 While the horizontal busbar arrange at the back of cabinet ,  The are top and bottom layers

A : Single layer busbar system is consist of 2 pcs busbar , suitable for the current 2500A or below .

B : While the system current bigger than 2500A should apply the double layer busbar design , every phase contains 4 pcs busbar (Rated current can reach :   6300A) .  The main busbar can be different sectional in each layer .

C.  The material of busbar is Copper (T2) ,  There are the specifications :  30mm x 10mm , 60mm x 10mm , 80mm x 10mm  ,

Busbar  with different section specifications can also be connected , and the busbar connect with the cabinet busbar do not need to punch holes .

4.3   The horizontal busbar should lay at the top position in the cabinet of back outgoing line structure .  (Maximum Current : 6300A , One unit should be reduced when the system current exceed 6300A ,  therefore the functional unit height is  1600mm)

Vertical busbar

A: The vertical busbar arrange at the vertical busbar chamber ,  Applied to the functional unit connect with the main busbar, The vertical busbar select the “ L “  type direct angle copper ,  lay it at the multi-functional board ,  it can be three or four phase .

B: The IP can be IP20 while  pull out in the drawer unit .

6.   Protective conductor

6.1  The protective conductor is used to ensure the potential connection of the skeleton, which consists of both horizontal and vertical conductors located in each cabinet ,  The horizontal conductor is connected to the cabinet skeleton and other horizontal conductors. The vertical conductor uses an electric power cable to protect the conductor and connect the grounding line.

6.2  The  sectional area of the protective conductor can be customized according to the actual current requirement , select the proper specification .

7.  The small control busbar

7.1 The control busbar can provide the power of total control circuit , and some field bus working power of communication devices .

7.2 The control busbar can be installed in the special disconnecting chamber , it can be laid throughout the system as required  .

8. Cable vault

8.1  Cable vault used for assign the electrical cable , it located in one independent chamber in the front or back of cabinet .

8.2  The cable room has special primary and secondary wiring terminals and corresponding cable fixtures  .

8.3  According the real size of the cabinet and wiring methods , there are the cable outgoing ring or outgoing flange plate .

8.4  The module can be extend or reduce according the clients requirements .

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product Overview

 JXF series wall mounted power distribution box below 400 is the new product introduced from ABB , it has the features of compact and reasonable structure , not only instead the characteristics of FXF , but also reflects the development and direction of the modern electrical industry . JXF series wall mounted power distribution box is the distribution device designed according the the component number , specification , quantities . The products are widely used in industrial and civil buildings , Rated voltage below 380V , Frequency is 50HZ , with the function of lighting, power distribution and automatic control .

JXF series wall mounted power distribution box below 400 with the closed structure , mounted or flush installed at the wall , The box is bend and welded by cold rolled steel plate, The surface done electrostatic spray plastic treatment , beautiful and high protection performance .The door and box body are welded with grounding screws , connect with multiple soft cables , good grounding protection , The shell ingress protection is IP30 , conform with GB7251-1 and EC61439-1 standards .

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product Overview

 JP series outdoor integrated power distribution box with the multifunction of measurement, feeding out, reactive power compensation, also have the protection features of short circuit, overload, over voltage, electric leakage , small volume, beautiful appearance, economical and practical , it is the ideal power distribution product for urban and rural power grid transformation .

 Regular Working Conditions

Ambient temperature :  -25℃  ~  +40℃

The sea level height not above 2500m  

Relative humidity :   The daily average temperature not exceed 90% .  

The installation environment shall be without obvious filth, no explosive or corrosive gas

   Structure Characteristic

 There are the horizontal type and vertical type , The shell is made of (2mm) high quality stainless steel or honeycomb structure stainless steel double-layer composite plate , It has the features of flame retardant, environmental protection, heat insulation, anti-condensation ,use the special stainless steel welding process , strength box structure , bright surface , no weld marks , The inner installation board with hot galvanizing process treatment , ensure that do not be rust within 20 years,  There are the front door and back door , easy for client operate or repair , there are the high elastic and aging-resistant sealing strip around the door . Every door equipped with bright and dark door locks , The bright lock has the rain cover , measurement room is fully enclosed with lead sealing device , There is the inline cable pipe in the side of cabinet to prevent the rain, ventilation and cable outlet holes at the bottom .

The top with ventilation lanes and wire nets for waterproof, rust, dust, foreign body function, protection grade IP54 .

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product Overview

 The CZDW series DC cabinet use the Cadmium nickel battery ,floating charger , and equip automatic detection and alarm device . With the features of long life span , on pollution , easy maintenance and stable voltage , low internal resistance output , withstand high current impact,strong adaptability, high reliability , it is the ideal DC operating current device .  widely used in power and distribution plants which the voltage 500KV or below . It can also be applied to metallurgy, mining, oil, radio and television, computer rooms, underground railway, high-rise buildings and other industries . As DC control, signal power, power off protection and the power supply of breaker operating mechanism closing  .

 This products compliance with standard : JB/T5777.4-2000  <<General technical conditions and safety requirements of electric power system DC power supply equipment>>  .

 Product Characteristic

 The dual-way AC inputs controlled by microcomputer can be automatically converted .

There are the functions of automatic detection, display and alarm protection the AC input while over voltage, over current, missing phase . The charging and floating charging device adopts the high-frequency intelligent rectifier module , N+1 redundancy fits ,  automatic average current flow, and it can be plugged in electricity . Automatic conversion of both battery charge and floating charge process  , can operate normally according to the computer settings .Recovery of power transmission and other procedures by charge intelligent management .  When the microcomputer control device fails or the wrong control instruction is sent , The charging module enters the independent operating state . The output voltage is the factory set safety voltage  ,Ensure the reliability operation of the system .

The intelligent four-remote system provides detailed communication protocols for AC input, DC output, battery circuits, and expanded environmental monitoring , and has the intelligent interface for communication with the substation integrated automation system.

 Basic Technical Parameters

 Input Voltage :   AC380V

Output voltage: DC220V/DC110V/DC48V/DC24V

Battery Capacity: 3000AH

 Control Busbar

Maximum recurring load current  :  300A

Accident load current :           <300A

Accident load time :              8b

Number of feeding circuit :        4-6

 Closing busbar

Closing pulse current                5000A

Closing pulse time                   0.3 h

Number of feeding circuit :         4-6  

 Regular Working Conditions

Ambient temperature : -50 ℃ ~  +40 ℃ ,  The average 24H temperature does not exceed  +36 ℃

The sea level height not above 2500m  

Relative humidity :   Not exceed 50% at 40 degree ,  There maybe condensation at lower temperatures if there is higher relative humidity .

The installation environment shall be without obvious filth, no explosive or corrosive gas and dust  The installation site shall be free of violent shock.Installation inclination shall not exceed 5 degrees, and the whole group of cabinets is relatively flat

   Remarks: If the environment is not conform with the above conditions , the user shall negotiate with the Company

  Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Scope of Application

 The following non-linear power equipment occasions

1.  Power distribution grid (brightness control)

2.  switching mode power supply (computer, office automation equipment, home appliances)

3.  Motor adjustment equipment

4.  Self-sensed saturated iron core

5.  Uninterruptible Power System

6.  Rectifier

7.  Welding equipment

8.  Electric arc furnace

9.  CNC

10. Electronic control mechanism

11. EDM Machinery

 Principle of operation

It may be wrong to consider the origin of the equipment running fault inside the factory,

The fault also can be caused by the harmonics generated by adjacent factory affecting the public distribution power grid.

 GGJ series low voltage filter reactive power compensation device is consist of CVT-18 Series  measurement device , MST/MSK series filter compensation module , busbar system , protection system , cabinet ,etc . The measurement and control unit measures the reactive power ,

Based on the preset parameters , The MST filter compensation module automatically synchronized switch by the HKT connection free cutting device . The three phase implementation reactive compensation to separate phase accurately . The reactor prevent the system oscillations .   According to the design purpose , lots of harmonic are absorbed .

  Characteristic

 1. highly intelligent measurement

the measurement and control device adopt DSP technology , can measure kinds of parameters including  frequency, voltage, current, active, reactive, power factor, harmonic , also can  synchronized switch automatically , There are the alarm function of harmonic limit, voltage limit ,system oscillations and protection .

  2 .highly efficient, safe and reliable

GGJ series filter reactive compensation appliances and hl series filter reactor . Capacitance has a built-in discharge resistance . Adopt dry technique , voltage sensitive technology , Long life

span and strong overload capacity .The reactor with a high linearity and the inductance error is small , Small size and high temperature grade (Grade H) , There is also a perfect temperature protection system and ventilation system .  

  3.Switch technology

 HTK no connection quick surge switching device or high performance contacts   .

 Regular Working Conditions

Ambient temperature : -50 degree ~ 40 degree ,  The average 24H temperature does not exceed  +36 degrees

The sea level height not above 2500m  

Relative humidity :   Not exceed 50% at 40 degree ,  There maybe condensation at lower temperatures if there is higher relative humidity .

    The installation environment shall be without obvious filth, no explosive or corrosive gas and dust  The installation site shall be free of violent shock.Installation inclination shall not exceed 5 degrees, and the whole group of cabinets is relatively flat

  Remarks: If the environment is not conform with the above conditions , the user shall negotiate with the Company

 Main technical parameters

 Rated Voltage : 400V

Rated Frequency : 50Hz

Maximum operating current : ≤ 1.4ln

Maximum operating voltage : ≤ 1.4Un

Response time : No connections fast no surge switching ≤20ms , High-performance power contactor ≥60s

Measurement accuracy ： Voltage/Current ± 0.5% ， Power ± 1%, Frequency 0.1Hz

Measurement range of voltage and current : 1V ~ 300V (Phase voltage) AC : 0.01 ~ 6A  AC

Control loop :  18

Ambient temperature :  -25℃ ~ +45℃

Relative humidity : ≤  90%

Installation : below 1000m above sea level

   Contacts : 

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product Overview

 GGJ low voltage dynamic reactive power compensation device are widely used in electricity, chemical, ship, subway, automobile, construction, metallurgy, textile and other industries .

The company try the best to provide effective value for every client , ensuring all products in good quality and the customer’s satisfaction is our guidelines of designing and manufacturing .

Improve the electricity quality , reduce the cost is our consistent service rule .

  Scope of Application

There is the large-capacity nonlinear load in the system

The load changes frequently

The load of three phase load is unbalanced, requiring phase separation compensation

  Principle of operation

GGJ series low voltage dynamic reactive power compensation is consist of CVT-18 Series  measurement device , MIT dynamic compensation module , busbar system , protection system , cabinet ,etc .  The measurement and control unit measures the reactive power ,

Based on the preset parameters , automatically synchronized switching by the HKT connection free cutting device .The three phase implementation reactive compensation to separate phase accurately .

 Characteristic

 1. highly intelligent measurement

he measurement and control device adopt DSP technology , can measure kinds of parameters including  frequency, voltage, current, active, reactive, power factor, harmonic , also can  synchronized switch automatically , There are the alarm function of harmonic limit, voltage limit ,system oscillations and protection .

 2.  Economic , safe , reliable

Applying capacitors ,   Built-in discharge resistance , advanced  self-healing technology , voltage sensitive circuit breaker , long life span and strong overload capacity, prevent accidents from aggravating ,no pollution, no combustion, no explosion risk .

  3.  Quick switching technology

It apply the quick switching technology , avoid the flow impact phenomenon caused by traditional contactor ,  and extended the capacitance service life effectively, especially in the condition of sharp voltage change caused by reactive power , reduce voltage fluctuation ,  maintain the voltage balance level, improve the transmission capacity,  reduce loss .

  4. Modularization

Using modular production technology,  complete set,  Good for system reconstruction

 Regular Working Conditions

Ambient temperature : -50 ℃ ~  +40 ℃ ,  The average 24H temperature does not exceed  +36 ℃

The sea level height not above 2500m  

Relative humidity :   Not exceed 50% at 40 degree ,  There maybe condensation at lower temperatures if there is higher relative humidity .

    The installation environment shall be without obvious filth, no explosive or corrosive gas and dust  The installation site shall be free of violent shock.Installation inclination shall not exceed 5 degrees, and the whole group of cabinets is relatively flat

  Remarks: If the environment is not conform with the above conditions , the user shall negotiate with the Company

    Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Scope of Application

 GGD fixed type low voltage switchgear suitable for power plants , power substation ,industrial and mining enterprises , has the function of electric energy conversion, distribution, and control for the lighting and power distribution in power systems which is AC 50HZ , Rated operational voltage 380V , Rated current up to 6300A . This item has high separation ability, flexible short-time tolerance current up to 50KA , flexible , convenient combination, strong practicability and novel structure. This product is one of the representative products of the assembled and fixed panel switchgear in China.

 This products compliance with standard : GB7251.12-2013 and IEC60349  <<Low-voltage complete switchgear and control equipment>>  .

 Regular Working Conditions

Ambient temperature : -50  ℃ ~ 40  ℃ ,  The average 24H temperature does not exceed  +36 degrees

The sea level height not above 2500m  

Relative humidity :   Not exceed 50% at 40  ℃,  There maybe condensation at lower temperatures if there is higher relative humidity .

    The installation environment shall be without obvious filth, no explosive or corrosive gas and dust  The installation site shall be free of violent shock.

  Remarks: If the environment is not conform with the above conditions , the user shall negotiate with the Company .

 Scheme of auxiliary circuit

There are the power distribution scheme and power plant scheme of auxiliary circuit design .

 Main busbar

 It will adopt the single copper busbar for the rated current below 1500 , otherwise, adopt double copper busbar . All the busbus faying surface are treated by enamel process .

 The GGD cabinet mainly adopts the electrical components that can be mass production in China ,For example , DW17 , D220 ,DW15 , The circuit breaker : DW45, CW1, AE, M,F ,etc .

MCCB: D2253 , TM30 , NS , etc .

 HD13BX and HS13BX type rotary operation knife switch are the professional component for the GGD unique designed structure .It changes the operation mode of the mechanism, keep the advantages of the old product, and is one  utility model electrical element.  

 As GGD cabinet is flexible for installation , When select the better performance , new advanced technical components , there will usually be no difficulty for replacement .

In order to improve the circuit stability , The bus support of GGD cabinet adopts special ZMJ combination bus clamp and insulation support ,The bus clamp is thermoplastic forming of high strength and high flame retardant PPO composite material .   Good self-extinguishing performance , unique structure .It is easy to combine into single or double bus clamps by simply adjust the building blocks .Insulation support is casing structure, low cost, high strength, avoid the insufficient creepage distance of the old product.

2.1    Horizontal busbar

  Rated Current (A)           Dimension of Copper bar（mm)

 400            40X4

630            50X5

1250           60X10

1600           80X10

2000           2X (60X10)

2500           2X(80X10)

6300           2X(100X10)

Contacts 

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Scope of Application

 GCS low voltage withdrawable switchgear (hereinafter referred to as switchgear) is designed for electrical power clients with high-tech performance standard, can meet the development of electrical power market , more competitive than other low voltage switchgear . GCS has been widely selected by power equipment clients currently .

 Switchgear widely used in the power distribution industry of power plant, petroleum, chemical, metallurgy, textile, high-rise buildings , Etc . The three phase AC frequency 50/60HZ , Rated working voltage 380V (400V) (660) ,  Rated current 6300A or below , It is the low voltage distribution equipment in power supply system, centralized motor control and reactive power compensation .

 This products compliance with standard : GB7251 <<Low-voltage complete switchgear and control equipment>>, IEC60349 <<Low-voltage complete switchgear and control equipment>>  ,and JB/T9661 <<Low voltage withdrawable switchgear>>

 Regular Working Conditions

1. Ambient temperature : -15 degree ~ 40 degree ,  The average 24H temperature does not exceed  +35 degree , if above the temperature , It need reduce the capacity according the actual condition.

2. The sea level height not above 2500m .

3. Relative humidity :   Not exceed 50% at 40 degree , It allow the greater humidity at relatively low temperatures

4. Installation inclination shall not exceed 5 degrees, and the whole group of cabinets is relatively flat

5.  The installation environment shall be without obvious filth, no explosive or corrosive gas and dust  The installation site shall be free of violent shock.

Remarks: If the environment is not conform with the above conditions , the user shall negotiate with the Company

  Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Scope of Application

 GCK  (The function is equivalent to or superior to GCL) low voltage withdrawable switchgear (hereinafter referred to as switchgear) suitable for the Rated working voltage  380V, AC system three phases and four lines or three phase five lines . As a power system for power plant, substation, industrial and mining enterprises and high-rise buildings for power receiving, feeding, reactive power compensation, power metering, lighting and motor centralized control  .

 This products compliance with standard : GB7251 <<Low-voltage complete switchgear and control equipment>>, IEC60349 <<Low-voltage complete switchgear and control equipment>>  ,and JB/T9661 <<Low voltage withdrawable switchgear>>

 Regular Working Conditions

1. Ambient temperature : -15 degree ~ 40 degree ,  The average 24H temperature does not exceed  +35 degree , if above the temperature , It need reduce the capacity according the actual condition.

2. The sea level height not above 2500m .

3. Relative humidity :   Not exceed 50% at 40 degree , It allow the greater humidity at relatively low temperatures

4.  The installation environment shall be without obvious filth, no explosive or corrosive gas and dust  The installation site shall be free of violent shock.

5. Installation inclination shall not exceed 5 degrees, and the whole group of cabinets is relatively flat

Suitable for transport and storage processes at the following temperatures, -25 degree ~ +55 degree and not exceeding 70 degrees in a short time ( within 24 hours) .

  Remarks: If the environment is not conform with the above conditions , the user shall negotiate with the Company

Main technical parameters

Rated insulation voltage:  660V   1000V

Rated working  voltage:  380V  660V

Auxiliary circuit rated voltage ： AC220V AC380V DC110V DC220V

Rated Frequency :  50HZ/60HZ

Rated Current :  Horizontal busbar < 6300A , Vertical busbar :  630A  800A  1200A

Rated short-time resistant current : 80,80KA/1S,  Neutral busbar: 30KA/1S

Rated Peak Current :  105kA/0.1S,  50kA ~ 0.1S

Functional Unit(drawer) breaking capacity : 50kA

Case protection grade :  IP30 ,  IP40

Busbar : three-phase four-line system, three-phase five-line system

Operation mode:  local ,remote, automatic

Structure Characteristic

The basic frame of the GCK is the combined assembly structure , All structural parts of the cabinet rack are galvanized and sprayed ,  Connect to basic cabinet rack by screws , add the door , separate board , drawer , installation frame and busbar ,as well as electrical components ,

assembly into full set of switchgear .

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product overview

 XGN66-12 box type fixed(indoor) AC metal enclosed switchgear (hereinafter referred to as switchgear)  is a new generation high voltage electrical complete set .

This switchgear compliance with standard  GB3906 << 3 ~ 35kV AC metal closed switchgear>> ,

IEC298 << Rated voltage between 1KV and 52KV AC metal closed switchgear and controlgear >>, DL/T404 <<Technical conditions for AC high voltage switchgear >>

 This switchgear adopts advanced technology , the advantage is small volume , only 50% as the general switchgear , The circuit breaker have the features of high reliable , good performance, linkage institutions are reliable, simple structure  .

 Scope of application

 This switchgear suitable for the 3.6 ~ 12KV three phase AC 50Hz , is single segment busbar indoor complete set , used for the power accept and distribution , and control, protection, and monitoring the circuit . Suitable for various types of power plants, substations and industrial and mining enterprises , high-rise building places , also combined with the ring net cabinet apply to switching station .

 Regular Working Conditions

Ambient temperature : -10 ℃  ~  +40 ℃    

The sea level height not above 1000m  

Relative humidity :  Daily average not exceed 95% , Monthly average not exceed 90%

Seismic intensity  : No more than 8 degrees

The installation environment shall be without obvious filth, no explosive or corrosive gas and dust  The installation site shall be free of violent shock.

Remarks: if not conform the above conditions , User should negotiate with the manufacturer .

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product overview

 XGN-12(Z) box type fixed AC metal enclosed switchgear (hereinafter referred to as switchgear) , suitable for the power system of Rated voltage 3.6 ~ 12 kV , 50HZ , Rated Current  630A ~ 3150A , Three phase AC single busbar , dual busbar , used for the power acceptance and distribution . Can meet the requirements of various types of power plants, substations and industrial and mining enterprises .

This switchgear compliance with standard  GB3906 << 3 ~ 35kV AC metal closed switchgear>> ,

IEC298 << Rated voltage between 1KV and 52KV AC metal closed switchgear and controlgear >>

And DU/T402 ,  DL/T404 .

 Structure Characteristic

XGN-12 is the metal enclosed structure switchgear , The cabinet frame is welded from angle iron ,

There are the circuit breaker room , busbar room, relay room , separate by steel board .

The circuit breaker room at front side and bottom of cabinet body , The rotating pull lever of the circuit breaker is connected to the operating mechanism , The top connecting terminal connect with the top isolator switch, the bottom connecting terminal of circuit breaker contact with the current transformer ,  The current transformer contact with the wiring terminal of bottom isolator switch. The circuit breaker room also has a pressure relief channel ,the gas can be released through the exhaust channel if the internal electric arc occurs .

 The busbar room at the top backside of cabinet ,  in order to reduce the height of the cabinet, the busbar arranged . Support by the bending strength 7350N porcelain insulator . The busbar connect with the wiring terminal of top isolator switch. The adjacent busbar rooms can be isolated .

The cable room at the bottom backside , can equip the voltage monitoring device , the cable fixed on bracket , this room can be the contact cable room as it is the contact scheme . The relay room at the top foreside , the installation board can install kinds of the relay, there are the terminal row bracket , can install the indicated instrument and signal elements at the door , can arrane the  secondary small busbar at the top .

The mechanical interlock used to prevent the operate the isolator switch on load , incorrect operate the circuit breaker , prevent entry to the electric live space , isolator switch with earthing close .

 Regular Working Conditions

Ambient temperature : -15 ℃  ~  +40 ℃    

The sea level height not above 2500m  

Relative humidity :  Daily average not exceed 95% , Monthly average not exceed 90% , The average of water steam pressure not exceed 2.2kPa . The monthly average water steam pressure not exceed 1.8kPa

Seismic intensity  : No more than 8 degrees

The installation environment shall be without obvious filth, no explosive or corrosive gas and dust  The installation site shall be free of violent shock.

Remarks: if not conform the above conditions , User should negotiate with the manufacturer .

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product Overview

 TBB-10  high voltage reactive power automatic compensation device suitable for the 220KV,110KV,35KV substation ,  10KV (6KV) busbar reactive automatic tracking compensation . Mainly used in the AC power frequency which is large load fluctuations , usually cause the situation of over or less compensation . This device can do the real time detection for reactive power . Then compare to the set values . Conduct automatic intelligent cutting operation . Make the reactive to dynamic balance , improve the power factor of system . Stabilize the system voltage, reduce the loss and save the electricity cost .

 Structure Characteristic

 It has the ZKG and ZGKN controller , through tracking the fuse automatically and control the main transformer , control the power factor and the system voltage within the set range ， can automatically identify the various operation modes of  double main transformer substation , by the long distance automatic selector switch. Can select various working methods of pressure adjustment and compensation flexible .

Automatic recognition voltage regulating switch gear information one by one by  BCD code , There are also the functions of double main transformer synchronization adjustment ,sliding gear , gas alarm .

Harmonic measurement display function ,can measurement and show low voltage side current high harmonic content .

With the function of high voltage, low voltage, break line, mechanistic breakdown , overflow of main transformer .

Equip with the RS-485 and RS-232 high-speed data communication interface , match the substation comprehensive automatic system  .

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994

[uedlucks]

Product Overview

 TBB-10 high voltage reactive local compensation device which small load change or single motor ,etc , it has been widely used in metallurgy, mining and building materials, petrochemical and group drainage industries , can improve the power factor of power system . Reduce the reactive loss of circuit and equipment . Improve the output capacity of the equipment, save electricity and improve the power supply quality.

  The TBB system reactive local compensation device adopt advanced design concept and processing technology , as well as integrity quality assurance system , after-sale system ,constantly  improve the technical content and quality .

 Main technical parameters

 Rated Voltage : 3KV , 6KV , 10KV, 24KV, 35KV

Power frequency : 50HZ , 60HZ

Power factor  :  can reach 0.95

Residual voltage :  step - down to 50KV in 5min after cut off the electricity supply .

 Functional characteristic

This device is the high voltage capacitor adopt advanced production technology , with the features of high reliability and stable performance , low loss, low operating temperature rise, long life, and low failure rate , high performance cost ratio .

 High voltage fuse as the short circuit and over current protection of the single capacitor , ensure the safe operation .

 Complete set device adopts cabinet structure , reasonable design , convenient maintenance , has a good dynamic and thermal stability performance , there is the high voltage safety device for forced locking , keep the operation staff safe .

 Contacts :

Senhengli Electric Co.,Ltd Website: http://www.senhengli.cc Email :  sales@senhengli.com wechat : uedluck TEL : +86-577-57107960 FAX: +86-577-51709994