thehungretail

[thehungretail]

Sika Ceram 200 HP

SikaCeram 200 HP is a premium cement-based tile adhesive with water resistance, used for most indoor and outdoor applications, and can be used for water tanks or wet areas. The product is used for various types of homogeneous tiles, ceramic tiles, marble, mosaic, or granite.

Advantages Sika Ceram 200 HP has the following outstanding advantages: Simple application: Easy to apply with a specified amount of clean water. Water-resistant: The product can be used in wet areas such as toilets and kitchens due to its good water resistance. Optimized capability: No need to soak the tiles before installation. Very good adhesion: Ensures a strong bond. Stable quality: Ensures quality and consistency in all products. Easy transportation and installation: easy to transport and time-saving. Weather-resistant and durable: Capable of withstanding harsh weather conditions and highly durable. FEATURES SikaCeram®-200 HP is a cement-based tile adhesive with water resistance, suitable for ceramic tiles, homogeneous tiles, mosaics, granite, and marble. APPLICATION SikaCeram®-200 HP can be used as an adhesive layer for tiling in areas such as: Bathroom areas: This product is an ideal choice for tiling in high-humidity areas such as bathrooms or toilets. Kitchen area: SikaCeram®-200 HP, with its water resistance, is very suitable for wall and floor tile installation in the kitchen. Plastered brick walls: With good adhesion, plastering bricks will become easier. Exterior walls: Decorate and highlight the exterior walls. Balcony: Helps make the balcony fresh and beautiful. Swimming pool: SikaCeram®-200 HP is suitable for swimming pools due to its high water resistance. Precast components: The product is used for tiling precast components. SURFACE QUALITY / PRE-TREATMENT The concrete surface needs to be cleaned and free of grease, dirt, and other impurities. Water-absorbing surfaces must be fully saturated before proceeding with the tiling work. MIX Add SikaCeram®-200 HP powder (1 bag 25 kg) into a container holding 5.5 – 6.5 liters of clean water. L of clean water Use an electric mixer to mix the mixture evenly for 3-5 minutes until it reaches a uniform consistency. Stop for 1-2 minutes, then mix again for one minute before use. APPLICATION Pour an appropriate amount of tile adhesive onto the substrate surface and use a notched trowel to spread it evenly. For the floor: Spread evenly on the surface For walls: Apply adhesive horizontally. To increase adhesion and coverage, it is advisable to apply a layer of adhesive on the back of the tile. Place the tile on the applied adhesive layer, press firmly to ensure the tile adheres tightly to the substrate. The position of the tiles can be adjusted within 20 minutes after installation. The adhesive mixture should be used within 30-45 minutes, depending on the surrounding temperature. PRODUCT INFORMATION Chemical base: Cement, selected sand, some additives. Packaging: 25 kg bag. Appearance/Color: Gray/White powder. Expiration date: 9 months from the date of manufacture, store in a dry place, avoiding moisture, in unopened original packaging. Storage conditions: Store in a dry place. Density: 1.43 kg/l (dry powder).

Thế Hưng is proud to be the unit specializing in providing genuine Sika in Ho Chi Minh City.

[thehungretail]

Rugasol F - Concrete surface retarder

Sika Rugasol F is a concrete surface retarder, specifically used to create rough finished surfaces, expose aggregates, or provide good bonding for edges, stop joints, and areas where subsequent plastering layers are needed.

ADVANTAGES

Used as a curing agent on formwork to create non-aggregate finished surfaces.

Cost-effective and efficient in creating a rough, adhesive surface without the need for chiseling or sandblasting.

Used to create precast panels with a finished surface, showcasing the natural color and roughness of the aggregate. Therefore, the aggregate remains intact and does not break.

APPLICATION

The retarder only slows down the final setting process and does not "prevent" the hydration of the cement. When used correctly, Rugasol will not change the color of the concrete, even when using white cement.

Sika® Rugasol F will not reduce the bond strength between steel and concrete if Sika® Rugasol F is accidentally spilled, just clean it with clean water.

The product acts as a thick paste inhibitor and is applied to the formwork to create finished surfaces with exposed aggregate.

FEATURES

Sika® Rugasol F has the following characteristics:

The surface retarder Sika® Rugasol F is used to expose aggregates on Portland cement-based concrete surfaces.

Concrete roughening agent is an economical solution that is both cost-effective and highly efficient for creating a rough, adhesive surface without the need for chiseling or sandblasting.

Sika® Rugasol F is applied directly to the formwork for walls, ceilings, and vertical stop joints, as well as similar concrete surfaces. When dry, Sika® Rugasol F forms a thin, long-lasting, and water-soluble film. Avoid letting the product get wet from rain. It can be applied to the formwork before or after installation, while the steel reinforcement is installed as usual.

The Sika® Rugasol F product has the ability to slow down the curing process of the cement layer up to a depth of 6mm (1/4 inch). This depth can vary depending on the thickness of the overlay and the time from when the concrete is poured to when it is used, the water content, and the amount of cement used in the mix.

If the curing process of the cement layer is prolonged, the temperature

APPLICATION

Before using Sika® Rugasol F, the product needs to be stirred thoroughly and should not be diluted. It can be applied to clean formwork.

Apply a thick layer with a brush or roller and let it dry for about 2-4 hours. The formwork surface must be free of grease. The surfaces just coated with Sika® Rugasol F need to be shielded to avoid harsh sunlight.

Removing the formwork:

Exposing the aggregate:

The formwork should be removed as soon as possible after pouring the concrete to achieve the best results, 1 day in warm sunny conditions and 2 days in cold weather.

In cases where the formwork needs to be left on longer, it is advisable to use 2 or 3 layers of Sika® Rugasol F to ensure sufficient penetration. It is advisable to conduct a test on concrete first to check the effect of Sika® Rugasol F.

Cleaning:

When dismantling the formwork, wet cement may stick. In the case when the cement is still soft, removing it from the mold will become easier by using a brush or a high-pressure water jet. Ensure to clean immediately after removing the formwork and maintain moisture and regular maintenance. A small test should be conducted before use because the cement composition and specific conditions of each project may vary.

Cleaning of construction tools:

Clean the equipment immediately after use with hot water.

PRODUCT INFORMATION

Chemical base component: Polyhydroxy blend.

Packaging: 15 Kg drum.

Color: Low-viscosity, white gel-like solution.

Storage: in a dry place and avoid direct sunlight.

Shelf life: At least 09 months if stored properly and remains intact in unopened packaging.

Thế Hưng is proud to be a unit specializing in providing genuine Sika products in Ho Chi Minh City.

[thehungretail]

Rugasol C - Concrete Texturing Agent

Sika Rugasol C is a liquid retarder used to treat stop joints and horizontal surfaces, slowing down the hardening process while maintaining the cement hydration process.

ADVANTAGES Eliminating sandblasting and hammer chiseling, ensuring a solid surface and preventing stone from breaking. The product can be sprayed on the horizontal surface of freshly poured concrete. Easy to use and economical for creating a rough finish surface, providing a bond for stop joints and subsequent plaster layers on the horizontal surface of freshly poured concrete. APPLICATION Sika® Rugasol C replaces sandblasting and hammer chiseling methods, helping to create a solid surface without causing stone breakage. Horizontal surfaces of fresh concrete can be sprayed immediately after application, including: Floor. Roadway. Courtyard, outdoor corridor. Swimming pool. Walkway. FEATURES Sika® Rugasol C is a liquid inhibitor used for stop joints and horizontal surfaces suitable for use in cool conditions or to slow down the curing process. Sika® Rugasol C is an economical and easy-to-use method designed to create rough finished surfaces, providing a bond for stop joints as well as subsequent plaster layers on the horizontal surface of fresh concrete immediately after it has been poured. The curing inhibitor compound in Sika® Rugasol C interacts with the surface cement, slowing down the normal hydration process of the concrete (high cement content and temperature may reduce the effectiveness of the retardation). After the retardation process ends, the concrete will develop with normal strength. Sika® Rugasol C creates a decorative surface for finished concrete and can be used with various types of natural stone. This compound also creates an excellent rough surface, facilitating concrete pouring and the application of subsequent plaster layers. APPLICATION Sika® Rugasol C is a ready-to-use solution that can be applied directly from the container without dilution. The uniform coating of the material should be sprayed onto the horizontal surface of the concrete when the initial bleeding stage has just ended but before the concrete begins to set. A garden sprayer can be used to carry out this task. Standard: Approximately 0.25 – 0.3 kg/m2 The sprayed surface needs to be protected from direct sunlight and hot winds, which can cause the concrete surface to dry quickly. Proper curing procedures are crucial to ensure the durability and quality of the concrete. From approximately 12-24 hours after the concrete mixing begins, depending on the type of concrete and environmental factors such as temperature, wind, and humidity, the slurry layer on the concrete surface can be cleaned with a brush using clean water. During the use of Sika® Rugasol C, the concrete surface must be protected from rain, dust, and other elements. The spraying equipment and tools must be thoroughly cleaned with hot water after use. After removing the mortar from the concrete surface, proper curing must be carried out using an effective curing compound such as Sika® Antisol®. PRODUCT INFORMATIONChemical base component: Polyhydroxy blend Packaging: 5/25/200-liter drums Color: Liquid/transparent white Storage: in a dry place, away from direct sunlight. Shelf life: 12 months if stored properly in unopened original packaging.

Thế Hưng proudly specializes in providing genuine Sika products in Ho Chi Minh City.

[thehungretail]

Sikadur 31 CF Normal

Sikadur 31 CF Normal is a two-component thixotropic epoxy-based adhesive, specifically used for repairing concrete structural elements. ADVANTAGES Does not create air bubbles when curing and has a 25% stretchability. Has chemical resistance and high mechanical strength. Excellent adhesion to most types of construction materials. APPLICATION Sikadur 31 CF Normal is an adhesive and structural bonding agent for: Natural stone Ceramic, fiber cement Mortar, masonry, plaster Iron, steel, aluminum Wood Polyester, epoxy Glass Used as a repair and adhesive mortar for: Vertical and ceiling surfaces, corners, or edges Fill joints and seal cracks, patch voids, holes Used for repairing joints and cracks Used as an adhesive. Used as a repair and adhesive mortar for: Corners and edges. Fill hollow holes, voids. Used for vertical surfaces and ceilings. Fill joints and seal cracks: Repair joints and cracks. FEATURES Sikadur®-31 CF Normal and the following outstanding advantages: Easy to mix and apply Effective adhesion on most types of construction materials High adhesion strength Does not sag when applied on vertical surfaces or ceilings due to thixotropic properties No shrinkage upon curing Different colored components help easily control mixing quality No need for a bonding agent The mechanical strength will be high in the initial and final stages. Good abrasion resistance Prevent the permeation of water vapor and liquids. Prevent the permeation of water vapor and liquids. Good chemical resistance SURFACE PREPARATION Ensure the concrete surface is solid and meets the minimum required strength. The surface needs to be thoroughly cleaned, whether in dry or humid conditions (but without water pooling), removing impurities such as dust, grease, and old coatings or existing surface treatments. MIX Mix the two ingredients together until the mixture reaches a consistent texture and color, about 3 minutes if using a handheld electric mixer. You should use the entire mixed mixture. CLEANING TOOLS Clean all tools and equipment after use. Chemical base: thixotropic epoxy resin Usage rate: ~ 1.9 kg/m2/1 mm thickness Appearance: Component A: white or light yellow Component B: dark gray or black The mixture after combining component A and B: concrete gray Shelf life: 24 months from the date of manufacture Thế Hưng proudly specializes in providing genuine Sika products in Ho Chi Minh City.

[thehungretail]

🎉Sự kiện đặc biệt cuối năm - Giảm giá lớn nhất trong năm 🎉

Kính gửi quý khách hàng, Đừng bỏ lỡ cơ hội tham gia chương trình khuyến mãi cuối cùng hấp dẫn chúng tôi! Đây là cơ hội để bạn sở hữu những sản phẩm chất lượng cao với mức giá vô cùng ưu đãi cùng nhiều phần quà hấp dẫn. Để không bỏ lỡ bất kỳ thông tin nào, hãy nhấp vào "Theo dõi Facebook của chúng tôi" để cập nhật những tin tức mới nhất về sự kiện và nhận những ưu đãi đặc quyền từ chúng tôi. 👉 Hãy theo dõi chúng tôi ngay và sẵn sàng nhận những ưu đãi cuối năm cực kỳ hấp dẫn nhé! FanPage: https://lnkd.in/gk-emDbu Website: https://thehungvn.com/

[thehungretail]

Plastocrete N

Plastocrete N is a liquid additive that acts both as a highly effective plasticizer and a waterproofing agent.Plastocrete® N complies with ASTM C494 Type A standards.

ADVANTAGES Easy to compact, increasing the density of the concrete, resulting in a beautiful finished surface. Increase the strength and lifespan of concrete. Reduce shrinkage Increase water resistance Increase adhesion APPLICATION Sika Plastocrete® N is used in structural concrete and mass concrete, especially in water-retaining structures such as: Dams and reservoirs Wastewater system Canal Underground pipeline Water reservoir, swimming pool Places that require waterproof concrete FEATURES Plastocrete® N has the following characteristics: Improves workability without increasing water Easy to compact, increases the density of concrete, beautiful finished surface Increase the strength and lifespan of concrete Reduce shrinkage Increase waterproofing properties Increase adhesion Does not contain Chloride, does not corrode steel reinforcement CONSTRUCTION Plastocrete® N can be added to water that has been pre-measured before being added to the dry concrete mix, or Plastocrete® N can be added separately to the fresh concrete mix, and should be mixed for at least 1 minute per cubic meter (1m3) of concrete. TYPICAL DOSAGE Ready-mixed concrete has waterproofing properties and extends the setting time: Plastocrete® N: 0.40 - 0.50 liters / 100 kg of cement. Note: When used in excess, the setting time will be extended depending on the cement content and temperature. The final strength will not be affected. NOTE ON CONSTRUCTION It is necessary to test the mix to select the precise dosage for each specific requirement. If you need assistance, please contact the Technical Department of the Company. It is advisable to use an appropriate mixer and not to mix by hand. Should use Sika concrete curing compounds. IMPORTANT NOTE Avoid contact with food and household items. Avoid prolonged contact with skin. In case of contamination, wash carefully with water. If it comes into contact with the eyes and mouth, rinse with clean water and see a doctor immediately.

PROCT INFORMATION Chemical composition: Lignosulfonate mixture Packaging: 5 / 25 / 200-liter drums Color: Liquid/Brown Storage: Store in a dry place, protect from direct sunlight Expiration date: At least 1 year if stored properly in unopened original packaging Thế Hưng is proud to be a specialized supplier of genuine Sika products in Ho Chi Minh City.

[thehungretail]

Intraplast Z-HV – Plasticizer and shrinkage compensating chemical additive

Sika Intraplast Z-HV is a powdered plasticizer, ready to use. The product does not cause shrinkage and is used to seal gaps, improve fluidity, and extend the working time.

ADVANTAGES Intraplast® Z HV is an expansive shrinkage-compensating powder and pumping aid used to produce a range of mortars from fluid to thick, soil anchors, and fill mortars. Helps improve fluidity and extend working time, achieving high compressive strength even with high expansion requirements. Protects prestressing cables against corrosion, enhances bonding due to its viscous properties. The product has the ability to expand in volume when wet and protect rock anchor bolts from corrosion. Intraplast® Z HV is both durable and effective in sealing all gaps. It has a final expansion capability of up to 10% if the mixture is designed correctly. Non-toxic and non-flammable. APPLICATION Sika Intraplast Z-HV is applied in the construction industry as: Fluid mortar: The product helps optimize the fluidity and expansion capability of the fluid mortar. Filling mortar: Sika Intraplast Z-HV is used to fill voids and gaps. Soil and rock anchoring: Sika Intraplast Z-HV helps enhance bonding strength and stability, protecting anchors and rocks from corrosion during construction. FEATURES Intraplast® Z HV increases the volume and fluidity of the cement mixture by creating small air bubbles in the wet mixture without causing segregation. The product helps reduce water separation in the mixture, preventing early setting and simultaneously allowing for a reduction in water usage. Depending on the mixing ratio, the product can be adjusted from a sprayable liquid mortar to a thick mortar. PREPARATION

Along the crack, we drill holes approximately 6 mm apart, with a distance of 300 mm between two drilled holes. Ensure the holes are deep enough to insert the metal tube approximately 20 mm. •Insert the metal tube into the holes and secure them with Sika®-102 barrier material. Clean the concrete surface around the crack using a wire brush or sandpaper. •Wipe the surface clean with a clean cloth to remove adhering dust and easily flaking substances. •Use a trowel or spatula to seal the surface that has been cleaned with Sika®-102. PUMP CRACKS When Sika®-102 has been cured, begin the process of pumping cement grout. Attach the pump hose to the first tube on one side or the lowest point of the crack and start pumping the cement grout. Continue pumping until the cement grout seeps out from the next tube. Then, seal the pumped tube and repeat this process until all the tubes are filled with mortar. Cement mortar mixing formula: 50 kg of cement, 500 g of Sika® Intraplast® Z-HV, 19 liters of water (water/cement ratio). When Sika®-102 has cured, we can pump the cement mortar. Starting from one side or the lowest position of the crack, attach the pump hose to the first tube and pump the cement grout into the crack until the cement grout seeps out of the adjacent tube. Then, seal the recently pumped tube and continue this process until all the tubes are filled.

To prepare a batch of cement mortar, combine 50 kg of cement with 500 g of Sika® Intraplast® Z-HV and add 19 liters of water, maintaining a water-to-cement ratio of 0.38.Prepare a batch of cement: with 50kg of cement combined with 500g of Sika® Intraplast® Z-HV and add 19 liters of water (Water / Cement = 0.38). (mixing ratio: For mortar: 1.0 – 1.2% by weight of cement. Used for oil paste: 0.4 – 0.8% by weight of cement.).

Start with the first pump, connect it sequentially to the other pumps, and check the fill level of each pump to see if it is full.After completing the last pipe, check along the cracks again. After 12 hours of maintenance, use an edge grinder or appropriate equipment to cut the pipe. PRODUCT INFORMATION Base ingredient: cement. Packaging: 18kg bag. Color: Powder/white. Storage & Shelf life: 24 months from the date of manufacture if stored properly. See more: Price list for Intraplast Z – HV shrinkage compensating plasticizer currently sold at our store. Our products are distributed throughout the southern region and are among the strongest General Agents in the Sika distribution system in Vietnam, trusted and used by many projects. Thế Hưng is proud to be the unit specializing in providing genuine Sika products in Ho Chi Minh City.

[thehungretail]

Sika BC Bitumen Coating

Sika BC Bitumen Coating là hợp chất bitum nhũ tương dùng để chống thấm, tạo lớp phủ linh hoạt không để lại vết nối trên bề mặt ngay sau khi thi công. BC Bitumen Coating là sản phẩm chuyên dụng dùng để lót (làm lớp liên kết) cho việc thi công màng chống thấm bitum. (SikaShield P24 S 3mm)

[thehungretail]

Sika® Antisol® S is a curing compound for concrete surfaces, which creates a thin microcrystalline film that helps fill gaps and reduce water evaporation after concrete pouring. Thereby, ensuring the hydration process of the cement occurs when the product is applied to the concrete.

[thehungretail]

Phụ gia chống thấm Sika crete PP1

Sikacrete® PP1 là phụ gia hỗ trợ chống kiềm và liên kết cao cho bê tông, khi kết hợp với Sikament bê tông sẽ có được các thiết lập: độ bền cao, tính thi công tuyệt hảo, đạt cường độ cao sớm.

[thehungretail]

Nên mua sản phẩm Sika chất lượng, chính hãng ở đâu?

THẾ HƯNG Nhà phân phối Sika khu vực phía Nam. Thế Hưng tự hào là Tổng phân phối sản phẩm Sika tại khu vực phía Nam và hiện là một trong những Tổng phân phối nổi bật nhất trong hệ thống phân phối Sika tại Việt Nam.

Thanks to a team of experienced sales and technical consultants with many years of experience with Sika construction chemical additives, The Hung has long been a reliable address for answering all inquiries and providing technical support for users when applying Sika solutions in construction.

The system of hundreds of Sika agents and stores spreads across major southern provinces, connecting into a strong collective, conducting business and developing sustainably. For Sika and Thế Hưng, "Service" means meeting the needs of all customer groups and markets in the most efficient and quickest way. Thế Hưng always has a sales team and technical experts to support customers and projects in all markets.

With a team of highly experienced staff (formally trained by Sika Vietnam), we have the full capability to provide our customers with the following services:

Consulting - Customer training. Field testing. Consultation on troubleshooting and related issues. Providing solutions for construction projects as per requirements.

[thehungretail]

CÔNG TY TNHH XÂY DỰNG THẾ HƯNG

Chúng tôi tự hào là Tổng Đại lý phân phối sản phẩm Sika tại khu vực phía Nam và hiện là một trong số Tổng Đại lý lớn mạnh bậc nhất hệ thống phân phối Sika tại Việt Nam.

Số điện thoại: 028 3927 4649

Địa chỉ: 303 Đ. Lý Thái Tổ, Phường 9, Quận 10, Hồ Chí Minh

Website: https://thehungvn.com

MST: 0301449889

Email: retail.thehung@gmail.com

Google map: https://s.pro.vn/LNYF #vatlieu #thehung #dailysika

#xaydung #vatlieu #thehung #sika #xaydung #giaiphap #chongtham #mykolor #dungcu #phugua #vuarot #dangach #charon #baoduong #caukien