tech-help-24

[tech-help-24]

Complete Setup Information On The Rockspace Extender

Do you need instructions on installing the Rockspace WiFi extender? If your response is yes then you need to proceed to the configuration stages. Here, we’ll walk you through updating your credentials. You can complete this process with the help of this page. So, read the article carefully and do not skip any step.

Configuration Process Of Rockspace Extender

To finish the Rockspace WiFi extender setup procedure follow these points:

First, an ethernet wire is required for this technique.

Put the end of the ethernet cable into the port on the existing router.

The Ethernet port on the extender should connect to the other end of the Ethernet cable.

A port for connecting to the ethernet is located on the rear of the Rockspace repeater. 

Afterward, choose a separate Ethernet cable to connect to the computer’s LAN.

The LAN port on the repeater should receive the ethernet cable’s other end. The LAN port is typically colored yellow.

You can utilize your repeater by using a power adaptor. Insert a plug adaptor into the range extender’s power slot after bringing it to a nearby household outlet.

There should be a halfway point between there and your house. After that, the repeater’s light begins to flicker steadily in solid white. 

The power switch must then turn on behind the power slot.

Then, start your modem by plugging the power line adapter into the sockets.

Thereafter, your modem will turn on after the power line inserts into the power slot. 

No matter how bright the LED is, the modem’s light should always be on.

On the device to which your Rockspace extender connects, launch a web browser.

Last but not least, in the address box of your browser, type “re.rockspace.local”. 

You’ll arrive at the Rockspace WiFi extender setup page after clicking OK.

Change The Default Login Credentials

Here are some tips to alter your Rockspace gadget login details, which you can follow very simply:

Modifying Your Password Or SSID

Change the username and password once you’ve accessed the Rockspace WiFi extender setup page. To create something special and original, you must alter your current credentials. Re.rockspace.local directs you to the menu’s administrative page from the configuration page. This option will be available in the advanced panel settings for the Rockspace extender.

To begin with, select the system tab as your next option. It’s simple to modify the Rockspace extender login information on your device.

Next, you can also use this to modify the SSID on your Rockspace WiFi repeater.

Thus, you must first change your SSID. You can now access your WiFi extender using the default login and password. 

Now, you should double-type your password to ensure accuracy and prevent mistakes.

Lastly, to store all of the changes you’ve made to your Rockspace WiFi extender, tap the save button.

Change The Username

The data will appear in the right panel once you successfully log in to the extender’s admin page.

The box for the wireless name and SSID must fill out with the new network name for your extender.

Enter the name you were unable to find in your area.

The 2.4GHz and 5GHz wireless bands need to be configured in order to use the admin username.

Using the same user name for both bands is entirely optional. It is entirely up to you to choose another.

At any time along the process, click to save your settings.

It is crucial to update your extender’s username and SSID after changing the password for the Rockspace extender login. When you look up WiFi networks in your house, that name appears in the list. You can find it by using the wirelessly connected device.

Typical Problems Of Rockspace Extender

Rockspace extender reliability problems exist.

The main Rockspace extender website is also down.

An internet connection might not be established by the Rockspace add-on.

The rockspace repeater’s power LED lights are red.

These are some of the problems or causes that individuals encounter when setting up the Rockspace WiFi extender.

The Best Way To Fix These Problems

Here are several approaches to fixing the issues:

Distance Between Both Devices

The intensity of your WiFi extender’s signals may vary depending on where you place it. You do not need to place your router close to your modem if you have one. Your WiFi repeater should be placed in a visible region of your neighborhood. Here are a few easy ideas for getting strong WiFi signals with your Rockspace WiFi extender.

Initially, your home’s repeater should be placed in the middle. If you install the repeater in a wall corner, it won’t be able to transmit signals very far.

Your router’s antenna should remain erect. They can be kept in a horizontal position, but vertical is the optimum position for them.

Place your extender and router side by side, elevated from the ground. Powerful Rockspace WiFi signals will then begin to appear.

Examine Each Cable

The Rockspace repeater must wire to the router as well. We advise you to check all cable connections again if you've tried the previous two steps and are still having problems. Look at the links that connect them. Connect the appropriate port to each wire after removing all of them. Replace any broken wires you find with fresh ones.

We hope that after reading this text, your problem will be solved and you’ll finish setting up re.rockspace.local. If you run into any problems, kindly contact us.

[tech-help-24]

Complete Setup With Different Techniques For Rockspace Device!

Extenders are among the best WiFi gadgets available in the market. In this post, we have given some steps to help you with their setup, reset, and troubleshooting. Let’s start the setup process with the easy methods to set up the extender. 

Connect Extender With The Router

We will help to connect you to the Rockspace extender login steps. But we prefer keeping the Rockspace WiFi extender, next to your pre-WiFi router to the power plug.

Once you complete the process then, just turn on the power plug from the socket and let the extender boot up.

Now, the next thing is you need to scan your networks. 

So, keep your laptop or another device ready, to scan a new network which must be named rockspace_ext, and connect to it.

After that, open the internet browser on your device and search for re.rockspace.local.

Thereafter, just visiting that site, make sure you are not up with any unauthorized access. Or you will ask to build a new password to secure your extender.

Furthermore, the following step will scan the available network. Then you just need to select your main WiFi network name. Therefore, enter the existing password to join the extender to the pre-existing WiFi router.

If we talk about a more easy setup then, we will not be wrong giving out the example of the WPS button and making sure to position the extender antennas accordingly.

You may be logged in right at the moment. But make sure to save the settings and your extender is configured now.

Visit the chat support during any between the misery of Setup. In case you face any difficulty during the log-in, you can reset the extender and then proceed to the Rockspace extender login.

Manual Setup 

Manual setup is totally a by-hand setup. You have to connect the wires yourself. But be sure of these requirements for your router connection:

First, try connecting your router to the modem. 

Then, connect a computer to a router network.

Now, set out to configure the router for using Internet services. 

Use These Steps to Connect Wireless Router:

In the first step connect all the devices like the wireless router and modem to the computer.

Then just power off the computer.

After that, unplug the wire once you switch it off. 

Detects the ethernet wire which is connecting the extender to the computer.

Now, disconnect the computer from the end.

Connect the ethernet wire to the internet port of the wireless router.

As a result, take the blue wire that comes along with the router, and then connect it to the LAN port and the other one to the ethernet port of the computer.

Note: To this exact point your process if gone well then your network cables have formed a good connection, and you are all set to use the networks.

Follow The Sequence To Start Your Networks:

To start with the Setup process plug in the wire or the DSL extender and after waiting for a minute turn it on.

Now, plug in the power cord on the powerless router power port and wait for the next minute.

Now, turn the computer on for Rockspace Extender Login.

LAN Light: At the same time check the LAN light as well. As it should also lighten up green. Which means the computer is ready to communicate after forming the connection.

Wizard Setup:

In the Windows PC insert the Rockspace CD if you get any with the extender.

The CD will detect and will start the language using the PC.

After that, accept the language from the language option and you can easily change it to a different language. 

Then, select ‘next’ to proceed further.

Finally, start the Setup by clicking on Setup to start the installation assistant. Although the instruction will help you set up effortlessly. 

First Test And Then Set Up Wireless Connectivity

In general, you can log in with the default username of the admin and default password by entering the portal, or you can use the LAN address and the password you have used during the Setup process.

By clicking on the wireless router menu do it through the Wireless Settings.

The default SSID is Rockspace.

To set the region you have to select the region in which you can operate the wireless interface. 

By clicking on the apply button you can easily save the settings.

Test the Wireless connectivity of your computer, by clicking on the wireless link and easily obtain the IP address by DHCP of your existing Rockspace WiFi router. 

We hope the above blog was easily understandable and helpful in solving all your queries regarding the Rockspace extender login. As we have given you simple methods for your extender setup for your convenience. 

[tech-help-24]

Rockspace Extender Setup Page Not Working? Here’s How to Fix

In today's digital age, internet connectivity is vital for both personal and professional purposes. With the increasing number of internet-enabled devices, it's crucial to have a strong and stable internet connection to keep up with the demands of the modern world. One way to achieve this is by using WiFi extenders, which boost the signal strength of your existing WiFi network. However, sometimes, users may encounter issues while setting up the Rockspace WiFi extender. In this blog, we will discuss why the Rockspace repeater setup page may not be working and how to fix it.

Before we dive into the solutions, let's first understand what a WiFi extender is and how it works.

What is a WiFi Range Extender or Repeater?

A WiFi extender is a device that amplifies the existing wireless signal and extends it to a wider area, thereby increasing the WiFi coverage in your home or office. It receives the signal from your router and transmits it to other areas of your home or office where the signal is weak or non-existent.

The Rockspace WiFi extender is a popular choice among users as it is affordable, easy to install, and compatible with most routers. However, there may be instances when the Rockspace WiFi extender setup page may not be working.

Reasons Why the Rockspace WiFi Extender Setup Page May Not Be Working

Poor connectivity

The most common reason why the Rockspace WiFi extender setup page may not be working is poor connectivity. If your device is not connected to the WiFi network, you won't be able to access the setup page. Ensure that your device is connected to the WiFi network before attempting to access the setup page.

Incorrect Login Details

Another reason why you may not be able to access the Rockspace WiFi extender setup page is due to incorrect login details. Ensure that you have entered the correct login credentials, including the username and password. The default login credentials for Rockspace WiFi extenders are usually "admin" for both the username and password.

Compatibility Issues

Compatibility issues may also cause the Rockspace WiFi extender setup page not to work. Ensure that the extender is compatible with your router and that you have followed the correct setup procedure.

Firmware Issues

Firmware issues may also cause the Rockspace WiFi extender setup page not to work. Ensure that the extender's firmware is up-to-date and that you have followed the correct firmware update procedure.

How to Fix the Rockspace WiFi Extender Setup Page Not Working Issue

Check Connectivity

If you're unable to access the Rockspace WiFi extender setup page, ensure that your device is connected to the WiFi network. If your device is not connected to the WiFi network, you won't be able to access the setup page.

Check Login Details

If you're unable to access the Rockspace WiFi extender setup page, ensure that you have entered the correct login credentials, including the username and password. If you have forgotten the login credentials, you can reset the extender to its factory settings by pressing and holding the reset button for 10 seconds.

Check Compatibility

If you're unable to access the Rockspace WiFi extender setup page, ensure that the extender is compatible with your router. Refer to the user manual or contact the manufacturer for assistance.

Check Firmware

If you're unable to access the Rockspace WiFi extender setup page, ensure that the extender's firmware is up-to-date. Check the manufacturer's website for the latest firmware version and follow the correct firmware update procedure.

Clear Cache and Cookies

Sometimes, cached data and cookies can cause issues with the Rockspace WiFi extender setup page. Hence, clear the cache and cookies from your browser and try again.

Update the Browser 

If you are using an outdated browser, it may not be compatible with the Rockspace WiFi extender setup page. Therefore, try updating the browser to its latest version or switch to a different browser.

Disable Firewall or Antivirus

Sometimes, firewall or antivirus software can also block access to the setup page. Therefore, disable your firewall or antivirus temporarily and try accessing the setup page.

Reset the Extender

If you're still unable to access the Rockspace WiFi extender setup page, try resetting the extender to its factory settings. Press and hold the reset button for 10 seconds until the power LED blinks.

Note: After the reset procedure you need to do the setup process again. If You do not have enough knowledge about the setup then you need to follow the below direction.

Through WPS Approach Configure Your Extender

You can carry out the repeater configuration by following the procedures.

You must first attach your Rockspace WiFi repeater to the power outlet. 

Being near to the router is not necessary in this scenario.

Find the WPS button on your host router and extender next.

Now you need to push the WPS button on your main router next.

At this point, press the WPS button on your repeater and wait a short while.

Don't switch on your LED indication just yet. It will emit a constant green light. 

Give your extender some time to properly start up.

After that, you can use your computer or a mobile device to access your WiFi management.

Your internet connection has now been effectively established in this manner.

We anticipate that after reading this article your your Rockspace setup page error will be resolve or you will be happy as a clown.

[tech-help-24]

Rockspace WiFi Extender Setup: A Comprehensive Guide

In today's world, a stable and fast internet connection has become a necessity. With the increase in the number of internet-connected devices, it is essential to have a strong WiFi signal throughout your home or office. However, it's not always possible to have a router that can cover every corner of your place. This is where a WiFi extender comes in handy. A WiFi extender is a device that amplifies the existing WiFi signal and extends its range. In this article, we will guide you through the setup process of the Rockspace WiFi extender.

What is Rockspace WiFi Extender?

Rockspace WiFi extender is a device that amplifies your existing WiFi signal and extends its range. It supports up to 1200 Mbps WiFi speed and is compatible with most routers. It is equipped with dual-band technology, which means it can operate on both 2.4 GHz and 5 GHz frequencies. This allows it to provide a stable and fast internet connection, even in areas with poor WiFi coverage.

Rockspace WiFi extender has a compact design, making it easy to install and use. It comes with two external antennas that can be adjusted for better signal reception. It also has a WPS button, which allows you to connect to your router easily and securely.

Before you start setting up your Rockspace WiFi extender, make sure that you have the following things:

A working WiFi connection

A router that supports WPS

A device (laptop or smartphone) with WiFi connectivity

Now, let's move on to the setup process.

Step 1: Place the Extender

The first step in setting up your Rockspace WiFi extender is to find a suitable location for it. The ideal location for the extender is halfway between your router and the area where you need better WiFi coverage. This ensures that the extender can receive a strong signal from your router and amplify it to cover the dead spots in your home or office.

Plug in the extender to a power outlet near the router. Wait for the LED light on the extender to turn solid blue.

Step 2: Connect to the Extender

Now that your Rockspace WiFi extender is plugged in, it's time to connect your device to it. Open your device's WiFi settings and select the Rockspace network. The network name (SSID) should be "Rockspace_EXT." Once you connect to the network, open a web browser and go to the web address "ap.setup."

Step 3: Configure the Extender

You will now be directed to the setup wizard. Click on the "Start" button to begin the configuration process. The wizard will guide you through the following steps:

Select your language

Accept the license agreement

Select the mode of operation (Repeater or Access Point)

Select your router's WiFi network and enter the password

Configure the extended network name (SSID) and password

Save the settings

Step 4: Connect the Extender to the Router

The final step in setting up your Rockspace WiFi extender is to connect it to your router. You can do this using the WPS button or manually. If your router supports WPS, press the WPS button on both the router and the extender. Wait for the LED light on the extender to turn solid green, indicating that it has successfully connected to the router.

Rockspace WiFi extender setup

[tech-help-24]

 How to Amplify Your Home WiFi System

Almost every homeowner in the United States encounters network issues at their home. Sometimes, these issues are quickly resolvable while on some days they persist for a longer time and result in a frustrating experience. 

To avoid these network problems in your home, it is crucial to amplify your home WiFi system using different methods. For example, if you have a Rockspace router at your home, you can use a WiFi range extender provided by this data networking brand. In case you do not know much about amplifying your router, you can also check out re.rockspace.local setup website portal. You will find detailed information about various troubleshooting and amplifying procedures you can perform to boost your WiFi system performance.

In this post, you will be learning about different effective ways to amplify your home’s WiFi system. You can follow these steps for all routers, extenders, and boosters from different brands. Before we move ahead to the central idea of this post, let’s try to understand the need for WiFi amplification. 

Do You Really Need to Amplify Your Home Wi-Fi System? 

Every homeowner needs to amplify their WiFi systems periodically, no matter how expensive or premium the router you are using. It is a must to boost your WiFi performance. However, you can wait for up to 1-2 years if you have already amplified your router within a few months ago or you bought a brand new WiFi system recently. 

You need to amplify your home’s WiFi router immediately if: 

You are encountering network range issues in some rooms of your home.

Your WiFi network speed is slow.

Your WiFi network connection gets interrupted frequently.

Your WiFi network security is breached by outsiders.

Your WiFi network is unable to connect to as many devices as you want.

You have to call your ISP every few weeks for a connection-related complaint. 

It’s been so long since the last time you upgraded your router.

Apart from this, there could be many other reasons that suggest it is time to upgrade or amplify your home’s WiFi system. 

Most Effective Tips to Amplify Your WiFi System and Increase Its Capabilities 

Here are some tried & tested and expert technicians-recommended tips that can help you amplify your home’s WiFi system and increase its capabilities. Let’s have a deep look below. 

Place the Router in a Good Network Place 

First things first, place the router in a new place where your device can access the network comfortably. The center point of your home could be the best location to place your router as your device can share the network equally with every corner of your home from that point. However, make sure the center point of your home has direct access to the network. 

Place Your Routers Away From Walls & Floor 

Walls, floors, and some household metal items interrupt a WiFi internet connection. If you are encountering a weak-internet connection issue, these objects could be the culprits. Thus, place your WiFi router or extender away from the walls, floor, and metal objects. Doing so may improve your WiFi performance incredibly. 

Adjust the Placement of Your Wireless Electronic Items 

Most WiFi technologies that we use at our homes function at the 2.4 GHz frequency band. And some electronic items that we utilize in our homes like microwave ovens, baby monitors, and garage door openers also function at this frequency band. Thus, they act like a wireless network interrupter for your home’s WiFi. Adjust the placement of these devices or put your WiFi router or extender aside from them. This may bring positive change to your WiFi connection. 

Get a New and Better Router Antenna 

Usually, routers have omnidirectional antennas that broadcast radio waves in all directions. A high-gain antenna is also available in the market that you can use to get the broadcasting in the direction you want. Get this type of antenna for your home’s WiFi router if the omnidirectional antenna doesn’t work for you. 

Switch to 5GHz Frequency Band 

If you are unable to enjoy live streaming on your smart TV, this is maybe because your WiFi network is tuned into the 2.4GHz frequency band. Smart TVs and certain high-frequency electronic devices do not operate at their best potential. Thus, try switching your router’s frequency band to 5GHz. You might get the desired results. 

Get a Brand New Rockspace Extender 

Rockspace is one of the most reputed data networking brands in the US. It manufactures and sells the most cutting-edge routers and extenders. If you invest in one of their WiFi range extenders and connect it to your router, you will receive unbelievable results. You will be able to enjoy live streaming, gaming, and video conferencing anywhere across your home. You just need to ensure that your router and extender are not placed too far away from each other. 

Install the extender and after that, you will need to log in and set up it. Head over to re.rockspace.local to learn the correct steps to complete the login and setup procedures fastly. 

Update Your Router’s Outdated Firmware

The firmware in your WiFi router is like an operating system in your smartphone. It must be updated and available in your router in the latest version. Check if your router’s firmware is outdated, update it as soon as possible. You can call your ISP for that or you can do it manually by going through firmware update manuals. 

Make Use of the Mesh WiFi System 

Last but not least, make the most out of the most innovative Mesh WiFi system available in the market. The objectives of this WiFi system are similar to range extenders but it uses multiple satellite units to lengthen your home’s internet network range. Get a mesh wifi system now for your home to enjoy high-speed and high-performance internet connection all over your home. 

Wrapping Up 

Now, we have got almost all points covered. We hope these tips to amplify your home’s WiFi system will be helpful for you. To get access to such quality and useful information regularly, head over to re.rockspace.local online portal. You will be able to access a variety of technical guides on WiFi systems. 

[tech-help-24]

How To Boost The Speed Of Rockspace Router By Extender

If you are searching for how to increase the speed of the router through the Rockspace WiFi extender setup? Then you arrive at the correct post. On this page, you will know the seven ways by which you can easily boost the speed of the router. Let’s dive into the process. 

Note: Before doing the rockspace extender setup, first you will do these additional tips to increase the speed of the router.  

Method 1: Remove Extra Gadgets

Those gadgets that connect to the router internet use your router bandwidth. Make sure to remove all the devices which are not in use with the help of this they don’t catch your WiFi signal. After completing this method try again to connect your main device to the router WiFi again and see if it gives you the best performance or not.

Login into your router on your computer device and see all the connected gadgets. Remove that device that you don’t want on your WiFi network. 

If you don’t know how to login into the rockspace router then go to re.rockspace.local. Enter this web address in the URL bar of the browser. 

Method 2: Settle Rockspace Router- At Central-Place Of House

When you place your router near exterior walls then you will not get more range and coverage. In that condition, we suggest you place your router in the main area of your house. With the help of this, you will get a strong WiFi signal in all areas of the house. Take one ethernet cable and join it to the router long port or modem to put back the plug-in it. 

Method 3: Shift Router Away From Metal Objects

Anything between your Wavlink router also decreases the strength of the WiFi signal. Those appliances which cause the most interference with your router WiFi network such as microwaves, cordless phones, refrigerators, etc, Even wood, bricks, water, etc also absorb WiFi signal and decrease the range of WiFi. When you place your router then just avoid locating it near these appliances. 

Method 4: Change Router Frequency Band

The 2.4GHz frequency band easily passes through the walls and boosts up the range of the WiFi. Many of the routers support both 2.4GHz and 5GHz frequency bands that you connect separately. On the other hand, the 5GHz frequency band offers you a strong WiFi signal but does not easily pass through an exterior wall. So that it does not offer you the best range. So it is your choice which frequency band you want. 

Method 5: Update Firmware Of Rockspace Router

Upgradation of firmware improves the overall performance of the rockspace router. Search online for your router model number to see if there is any updated list on the official website. If you find any update then you will be required to login into the rockspace router on a new tab of your browser and see an option labelled ‘firmware update’. Now download that latest firmware file on your computer. Before trying out your WiFi, wait for a few minutes to upgrade the firmware successfully. 

Method 6: Place Foil Paper At The Edges Of The Router

Foil paper also helps you to reflect the WiFi signal in all directions of the house. The help of soda and water bottles gives shape to it. Now take out foil paper and place it vertically at the edges of the router. For just an example place a foil paper between your Wifi gadget and router, try this method when you are facing the slow speed of the internet. 

Note: After trying all the above-mentioned six tips if you are still facing a slow-speed internet problem then try out this final method. 

Method 7: Acquire Rockspace WiFi Extender

Rockspace WiFi extender is a device that helps you to remove all the dead spot areas of your house. With the help of this device, you can quickly extend the range of the rockspace router.

Overview Of Rockspace WiFi Extender

It increases the range of the router.

The installation process is very easy. 

You can purchase it on a very affordable budget. 

Rockspace extender comes with dual frequency bands. 

Login Into Rockspace WiFi Range Extender

First, find the location where you want to do the setup of the rockspace extender. 

Make sure the placement of the rockspace extender is closer to the host router. 

Now, launch the web browser and enter the web address of the rockspace extender in the URL bar. 

Now, fill in the username and password to login into it. 

Finally, you can see the login page of the rockspace extender on your display. 

Common Requirements During Rockspace Extender Setup

You must have an extender or one active power adaptor. 

Without these things, you can’t do the login and setup process of the rockspace extender. 

Also, you need one long ethernet cable. 

Setup Process Of Rockspace Extender

Through two different methods, you can configure their rockspace extender.

With the help of an ethernet cable.

With the help of the WPS button. 

By WPS Method

First, turn on your extender and place the extender in a power socket. 

After that, wait for a while to see a solid blue LED.

Make sure to place your rockspace extender closer to the host router. 

Press the WPS button on the Rockspace router. 

Now, just inside in two minutes press the WPS button of the extender. 

After this, the setup process is completely done, and place it in the new location of your house where you want. 

By An Ethernet Cable

Join an ethernet cable to the router ethernet port. 

Before doing the setup of an extender, your computer must be linked to the router. 

Now, attach the other end of the ethernet cable to the extender port. 

Wait for a while to see the LED solid blue. 

As a result, your rockspace WiFi range extender successfully links to the router. 

Note: After the configuration process of the rockspace extender, if you are facing any type of difficulty then follow these troubleshooting tips. 

Verify the distance between the extender and the router. 

Check the placement of the Rockspace WiFi extender. 

See all the cables. 

Update the software of the extender.

Tip: In case, your extender problem is not solved then reset your rockspace extender. After resetting you will need to do the rockspace WiFi extender setup again. 

Conclusion

With the help of these 7 boosting tips, we hope your slow-speed internet issue is now solved. After setup of the extender if you are still facing an issue then ping us and discuss your problem. Stay aware of more information regarding this.

[tech-help-24]

Know How To Access Rockspace Extender Login Page

You can visit the Login page at Re.Rockspace.local while configuring the Rockspace extension. After installation, however, the Default web address will not work. How can you access the login page to update the Rockspace extender firmware or make any other changes when re.Rockspace.local not working.

Tips For Logging Into Rockspace WiFi Extender

Be sure to turn off your mobile internet network before connecting.

Then, attach the WiFi extender to the electrical socket.

After that, wait until the indicator is fully on.

Connect your mobile or any other device to the WiFi network.

Select the Rockspace WiFi extender to connect.

To set the WiFi extender’s password after a successful connection, open a new tab and enter re.Rockspace.local.

Then input the current WiFi network after finding the network you want to expand.

Afterward, a successful connection is done. You may now relocate it to a place where your network will extend.

Login To The Default Rockspace WiFi Extender

You must be aware of the login information for your Rockspace booster device. Before setting up the extender device you can quickly access settings and control.

Additionally, you’ll receive a user manual and Rockspace Sticker with the default login address, username, and password.

The IP is 192.168.0.1, and the default login URL is re.rockspace.local.

The first time you log into Rockspace, you must create a new password.

Go on to the various stages when you prepare to install a range extender device:

The login screen will load once you open your WEB BROWSER, navigate to 192.168.0.1, or re.Rockspace.local, and wait.

Now, when you first configure the range extender, you must create a new login password. Therefore, before clicking the following button, enter a secure login password.

What Are The Steps For Configuring A WiFi Router & Modem?

More and more individuals are now using Rockspace WiFi routers because of their complete coverage, dependability, and great performance. Please follow the steps listed below to configure a Rockspace WiFi router and connect devices using the WiFi password.

In order to streamline the process, you now need to install a few things and finish the setup. Before starting the router configuration, give yourself five minutes to gather this information.

Conditions For Installing The Rockspace Router

There is no built-in internet connection in the router. Therefore, in order to connect to a Rockspace router and use wireless internet. You should have a modem from your internet service provider.

Please take the Rockspace router out of the packing and save any configuration cards that are inside.

You might be able to view the router’s default IP address, which is frequently 192.168.0.1, on the bottom label.

A computer or smartphone that can be used to connect to the router console.

A comprehensive web browser, such as Safari, Mozilla Firefox, or Browser, and a power supply close to the modem into which you may connect the WiFi router. 

Additional Ethernet Wire (Extra, But Helpful For Testing) Configuration Of The Rockspace Router

Here are some ways to install your Rockspace WiFi gadget:

Link the modem’s network port to the router’s WAN port using the included internet cable (often the yellow port).

Before turning on the router, make sure the modem is turned on and has a working connection to the internet service provider.

Open your browser on your PC, type 192.168.0.1 into the address bar at the top, and press Enter.

You could access the Rockspace router’s local web interface by navigating to; if you do, enter the default username and password when requested.

The username and password are admin and admin; if your WiFi configuration card has any other information, please enter it.

When you enter the Rockspace router interface, the modem will recognize the router, and the setup process will then start.

Please follow the on-screen instructions. Select your language, location, and whether or not you agree to the terms of use.

Choose your preferred network name (SSID) and a secure WiFi password (encryption key), then choose WPA2-PSK to confirm.

Additionally, you have the option to leave the guest network access but to password-protect it with a unique visitor password. When you are done customizing everything, save it, and before you exit the website, update the router’s firmware.

To access the network name and restart the router, use the recently created password. If your WiFi continues dropping or your home has a weak signal, this needs to fix.

After you connect everything, use the same password to link computers, phones, and printers to WiFi. If the setup fails or your re.Rockspace.local not working, reset the Rockspace WiFi router and begin the configuration procedure. 

Note: If you don’t have enough knowledge about how to reset the Rockspace WiFi router, you may go to the following steps:

Resetting The Rockspace WiFi Router

Your Rockspace WiFi router can reset using any of two techniques.

Reset gently.

Hard reset

Tip: Continue reading and do not skip any step:

Soft Reset For Rockspace Router

It’s the easiest technique for resetting the WiFi router. Use these steps when using this approach.

Locate the reset button on the router, which is normally on the device’s back. Now insert a paper clip into the reset button’s hole. Avoid pressing the button too strongly as this could damage your device. It is advised to hold down the reset button for eight to 10 seconds. Your router will restart itself. To ensure correct operation, connect your smartphone after 30 seconds.

Hard Reset The Rockspace Router

You must perform a factory reset before you may hard reset your Rockspace WiFi device. For a hard reset of the router, follow these procedures.

Start by unplugging the router’s power cord from the back.

To remove the battery cover, try to push it up with a flat-bladed screwdriver.

Now remove the battery and store it somewhere secure.

After that, place a battery in a holder and make sure it is there.

As a result, plug the router into an electrical outlet and wait for it to switch on before using it.

Note: You will have to set up the Rockspace WiFi router again after the reset.

Key Takeaway

With the help of this page, we hope you can feel relaxed. On this page, you will be able to know how to access into rockspace extender login page. As well as you will also learn the setup and reset process of the rockspace router. I am so grateful that you read my page. 

[tech-help-24]

Due To a Configuration Issue, Unable To Visit?

Is Your Rockspace extender going offline, due to the setup issues? Most people face this issue during the setup process of the rockspace extender. So, don’t panic we are here with a number of tips. Read this page carefully. Let’s start the process,

Common Issues- While Doing Rockspace Extender Setup

The rockspace extender does not work perfectly. 

The official website of Rockspace extender also not works correctly. 

Rockspace extender is unable to connect to the internet. 

The power LED of the rockspace extender blinks red.

These are the few reason or issues which people face during the setup of the rockspace WiFi extender. 

How To Troubleshoot These Issues

Check Placement Between Rockspace Extender And Host Router

The best placement to place the Rockspace extender is the Halfway location of the office and house. Make sure that place your rockspace extender within the range of the host router. Also, don’t locate your extender near the metal objects such as microwaves, refrigerator, etc. because these all appliance absorbs the wifi signal which comes from the router or extender. The range between the extender and router is not more than 10 to 15 feet. 

Verify Power Connection

In this situation, see the power socket which is connected to the extender, and turn on the power button. Make sure that the power cord is joined to the right port. It has the strongest connection between the rockspace extender and the router. 

Verify All Cable Connection

Wired also plays a vital role to join the Rockspace extender to the router. Apart from the above two methods if you are still facing an issue then we suggest you verify all cable connections. See that they are bound with each other. Disconnect all the wires and join them to the right port. In case, if you see any damaged wire then replace it with a new one. 

Note: Apart from the above three troubleshooting tips we hope your rockspace WiFi extender issue is now solved. If not then try out these additional tips to solve the problem. 

Upgrade Rockspace Extender Firmware

Upgradation of Rockspace extender firmware will help you to troubleshoot these issues. If you don’t know how to update the firmware then consider these steps. 

Open navigation and type re.rockspace.local in the location bar.

After that, the login page of the rockspace extender will open on your screen. 

Now, enter login credentials which are shown on the screen. 

Further, you will go to the settings page of the rockspace range extender.

In the last step, tap on the firmware update option. (under administration option)

Reset Rockspace WiFi Extender

Note: After trying out all the above troubleshooting tips, if you are still facing trouble then don’t worry try out this method to fix the issue. 

First, find the reset hole button. (It is mainly located at the back side of the extender)

Push and hold up that reset hole button with a paper clip for 8 to 10 seconds. 

After that, your extender device is completely reset. 

Tip: After the reset of the rockspace extender, you will need to the setup of extender again. Before the setup first, you will need to login into the extender. 

How To Login Into Rockspace Extender

First, join the rockspace extender to the WiFi gadget. 

Now, attach the extender to the WiFi network of your phone. 

After that launch a browser and type re.rockspace.local in the location bar. 

Now, the login page of the extender will open on your display. 

Fill in all the credentials which are shown on them. 

As a result, you can easily change any settings of the rockspace extender. 

Setup Rockspace Extender

There are two ways by which you can quickly do the setup of an extender. 

Setup Rockspace Extender- By WPS Method

Consider the below few steps to do this method. 

Note: Try only this method when your router has a WPS button. If it does not have a WPS button, then replace the old router with the new one. Otherwise, you can also try the second method. 

First, power on your extender. Now, connect the extender to the power socket and turn on the plug. 

Wait for a while to turn the LED into solid blue. 

Make sure to place the extender in the same room as the router.

Now, push the WPS button of the router. 

Within 2 minutes press the WPS button of the rockspace extender. 

After doing all the above steps, put out the plug of an extender from the power socket and locate it in a new location. Verify that both the extender and router don’t be far away from 10 to 15 feet from each other. 

Configure Rockspace Extender By Ethernet Cable

Take an ethernet cable and join the extender to the computer

Now, go to the setup page of the rockspace WiFi extender.

After that, enter all details which you see on your screen. 

Thereafter, click on the extender option to start the setup process. 

Now, hit on save button to save all the changed settings. 

After doing all the steps, you can change the position of the Rockspace WiFi extender. Place it where you face the slow speed of the internet. 

After trying out the reset method and doing the configuration process again if your extender issue is not solved then try out this final method. 

Contact To Internet Service Provider

After trying all the above methods but you are unable to get the answer of the extender issue. In that condition, we suggest you contact your internet service provider. As he may give you some tips to do this. 

Conclusion

With the help of the above tips we hope, your Rockspace extender is solved. If not, then feel free to contact our technical team. It will help you to get the answer of your issue. As well as you will get the proper knowledge of the Rockspace extender setup. Stay closer to this page for more updates.