tanlite00

[tanlite00]

How Do You Choose The Best LED Area Lights?

The many benefits of LED lighting have made many people switch to LED light in businesses and homes. They are money saving and have plenty of other benefits too. But whether you are going for LED parking lot lights or LED area lights, there are things you must remember to put into consideration so you are able to select the most suitable for your setting.

Your goals - What exactly are you trying to achieve? For instance, it is not very reasonable to use a 20w LED spotlight just to light up a small wall painting on your hallway when you can actually use a 4w downlight to achieve the needed effect. The market has so many options when it comes to LED area lights and you must begin by knowing what your goals are so you can make the right decision.

The watts - They determine the light output that you get at the end of the day. The LED chip brand affects brightness directly, whereas LED color affects the light output. The type of materials and their quality can also affect the brightness which is why different LED bulbs give different light outputs at the same wattage because of manufacturing differences. Different watts are suitable for different settings for instance 3w LED bulbs can be used in lamp shades, under benches, candle bulbs and spotlights whereas 5w bulbs can be used in bedside lamp and wall fittings.

The lumens - They measure the total amount of light that the light source emits and the LED area lights come with varying brightness. To know which bulbs are brighter, then you should use lumens instead of wattages. Choose the lumens in such a way that you get the best light intensity for the given area that you want to light.

Beam angles - LED bulbs and LED strip lighting use a 120° beam angle, but when getting downlights and LED spotlights, then you must consider the beam angles that are most suitable. For instance 60° beam angle can be suitable for ceilings with a height of 2.5 to around 3.5 meters, whereas ceilings that are higher than 5m are best served by a 24° to 30° beam angle. Accent lighting, on the other hand, should be guided by the size of the object.

Color rendering - This is the ability of the light source to give true color reflection on an illuminated object. The higher the color rendering index then the closer to daylight the illumination will be and daylight perfectly portrays the object or area. Consider how often the lights need to be used when thinking about the color rendering index to make the right selection.

When looking at LED area lights and LED parking lot lights, there is so much more that needs to be considered apart from the size and design. The more considerate you are with your selection the higher your chances of ending up with the best LED lighting [https://www.tanlite.com/] solutions for your specific areas.

[tanlite00]

Outdoor Flood Lights

Outdoor flood lights are used everywhere, whether it's a private house and garden, office, all sorts of buildings no matter what their use is, public places like parks and so on. Their primary use is for safety and security. Well lighted area is less likely to attract criminals because, if nothing else, there is a better chance for people to take a better look at them and recognize them later. In complete dark criminals are much safer.

Another use is decorative use. If you take an effort and design where exactly would you put specific lights, it can look awesome. Imagine a small light that's put on some special spot in your garden like fountain or some beautiful flowers worth of exposure. The problem is that it is easier for people to give up money when security is in question but for decor it's not that easy. That's why it is good to know that it can be done without a big change in your budget (solar flood lights). The reason for that is range of different types of outdoor flood lights that's suitable for every need.

Outdoor flood lights came in so many different styles, shapes, intensity that it would be wise to ask for professional opinion about what light you should get to suite your needs. It could happen that you have got a light that's too strong and it can actually blind you instead of giving you the right amount of light to see in the dark or when you need a instant light and you have got the light that need some time to get to the full brightness. That's why we are going to take a look at some of the main types that's been used the most.

Few types that are available on the market today are: Solar powered flood lights, Light emitting diode (LED), Compact fluorescent flood lights (CFL), Halogen lights...All of them produce large amount of light while using minimum energy.

Solar flood lights are lights that are powered by sun, storing the energy in batteries. Cost is minimum, just to buy it. You put it somewhere outside where it can gather the most light and you can enjoy in the night. Light emitting diode (LED) flood light is specific in a way that uses around 60 % less energy than electric lights. They are heat sensitive but more damage resistant than other lights. Compact fluorescent flood lights [https://www.tanlite.com/] (CFL) are lights that are not very strong (from 10 to 40 watts) so use them only if that's the intensity you need. Halogen lights are producing the good quality, natural type of lighting so if someone wants to show something like it looks in a day light this is the choice. They are very strong and electrically powered.

[tanlite00]

LED Flood Lights As a Best Lighting Choice

LED floodlights are well-known with homeowners for having a long life span, being an energy saver, and costing less compared to other products. They are compatible with interior and exterior installation. They are capable of providing adequate light to houses, gardens, roads, sports domes and commercial companies.

These lights offer a superb combination of radiance and luster compared with the standard halogen lights. They have diodes that permit for optimum brightness with the little electrical requirement. This is the main reason why there are a lot of individuals that love it compared with other choices in the industry.

Although they cost a little more than traditional fixtures made from mercury, they have various advantages to offset the expense. Depending on the needs of customers, they can be acquired in low and high electrical types with the option of additional mechanical improvements.

Introduction

Since the debut of the LED lamps in 1965, their looks and features changed a few times. Nowadays, anyone can buy bulbs in different designs and sizes. The landscaping industry in the United States and the United Kingdom highlights the best features of the LEDs by placing them in hard to reach locations.

It helps scale back on the electrical component and impact on the environment. They can also function as lighting materials for gatherings like corporate parties, birthdays, camping and other momentous occasions.

Latest Enhancements

The motion detection feature of the newest LEDs offered by lighting shops has changed rapidly over the past ten years. It is created with enhanced technology that offers people help in keeping an eye on any movements outside of their residence or business.

Top class floodlights can last for five years without needing any repairs and upgrades. Lights that are manufactured for exterior functions have a two-year warranty offered by companies.

One good thing about installing this kind of light inside is that it brings down the room temperature to a tolerable level. They do not produce any dangerous chemical and heat emissions.

A normal incandescent bulb lasts for one thousand hours while an LED lasts ten times more than that amount. LED lamps also possess considerable resistance to extreme changes in temperature and blunt force. With these technological changes, customers have the assurance of having superb fixtures and the peace of mind that the lights would not suddenly fall-off.

Homeowners without any prior experience in installing LED floodlights [https://www.tanlite.com/] will not have any problem at all since manufacturers offer an instruction manual with the product. They do not need to hire any technician to do the job, saving professional fees for other important financial concerns.

[tanlite00]

Steps To Install A Garden LED Flood Light System Yourself

Would you like to create a more inviting atmosphere in your garden this coming summer? If you would then the installation of a good quality LED flood light system may be the perfect solution. Of course you could pay for someone to do this work for you. However it is pretty simple to do it yourself simply by following the steps offered below.

Step 1 - Begin by drawing up a simple plan of where in your garden you would like the floodlights to be situated. Then beside these mark down what wattage the bulbs will need to be next.

Step 2 - Now you need to determine what size transformers are needed. To do this is very simple all you do is add up the total amount of wattage for the bulbs you will be using then multiply this figure by 1.3. So if for example the total wattage of each of the bulbs you are going to use was 20 watts and you were going to be installing 6 of them then the size of transformers needed after multiplying the 120 watts by 1.3 would be 156.

Step 3 - Next you need to determine how much lighting cable is needed. To make sure that you have enough cable measure the distance between each lamp and then add all these figures together and then times by 1.3. It is best if you use 12 gauge cable for the installation of LED flood lights in your garden. However if the distance between each light in the system is quite long or you choose to use higher wattage bulbs in them then it is important that you use much thicker gauge cable. Would recommend that you use either 10/2 or 8/2 cable in these situations.

Step 4 - After purchasing all the necessary items including any tools you may need especially wire cutters or strippers, screwdrivers, drills, screws and pliers you can start to install the LED flood light system in your garden. The first thing to do is actually place the lights in the positions you have chosen for them to go. Remember to make sure that they are in positions that they are going to do the most good, whether it is to help illuminate a particular part of the garden or to help create a special effect.

Step 5 - Once you have place the lights in position you should now start to run the cable from the transformer to them. It is best if you create separate cable runs for each light from the transformer rather than just connect one light to the next. This way if anything goes wrong finding the problem is a lot easier. It is best also to make sure that you run cables to lights that are of a similar distance from the transformer grouped together. Not only will this help to reduce any drop in voltage but also any loss of brightness produced by the lights.

Step 6 - As soon as the LED floodlight [https://www.tanlite.com/] systems has been connected to the transformers plug this into a GIF outlet and turn the lights on. Spend time examining them to check they are all providing a good amount of illumination. When satisfied mount the transformers and bury the cables.

[tanlite00]

LED Flood Lights Become Popular

You may hear more and more news about LED recently. LED (light-emitting-diode) is a semiconductor diode that emits light. It contains solid state lighting technology. There are so many kinds of light sources for flood lights, such as metal halide, high pressure sodium, halogen, mercury vapor and so on. Why have LED become more and more popular? You can find reasons in this article.

1. Higher Efficiency

Now, maintain efficiency of LED flood lights can be over 85 lm/w. It's about 5 times than halogen, so it can save over 80% energy comparing with halogen lamps.

Because of color temperature and color rendering index, they can save 50%-70% energy comparing with high pressure sodium floodlights.

2. Eco-friendly

LED flood lights do not contain UV, IR, Lead or mercury. It can be absolutely eco-friendly. Besides, the heat is less.

high pressure sodium, metal halide or mercury lamps can not be eco-friendly as LED lamps.

3. Long Lifespan

In theory, lifespan of LED is over 50,000 hours. It's about 5 times than metal halide and mercury lamps. It's also 8 times than halogen.

So, it saves maintain and product cost

4. Color Is Easy to Control

LED can emit full range of color, so LED flood lights can be full range of color.

5. Perfect Combination With Solar Power

Because LED floodlights save energy, cost of solar power is low. So, in many project, we choose solar power for LED lighting.

So, you know LED floodlights [https://www.tanlite.com/] have some many advantages. Energy saving, long lifespan and eco-friendly are popular all over the world.

[tanlite00]

Is High Power LED Flood Light Beneficial?

Many people are choosing to install high power LED flood lights around their homes to provide a better level of security. They install these lights to act a deterrent to any would be intruder. However there are a number of other benefits to be gained from installation of such lighting and below we look at just what some of these are.

Benefit 1 - Being energy efficient than traditional incandescent and fluorescent lighting, this form of lighting is much more reliable and they tend to last longer. So once they have been installed unlike other forms of lighting currently used you won't find yourself needing to climb ladders to replace them as often. A good quality form of high power LED flood light will last up to 6 times longer than traditional forms of lights.

Benefit 2 - Another benefit is that you are doing your bit to save the environment as these kind of lights don't need to use so much power to generate the light they emit. Also they don't create the same levels of heat pollution compared to other forms of lighting. So as a result you are actually helping to reduce the amount of carbon emissions your home is producing.

Benefit 3 - Although most homes today will tend to use electricity to power their LED flood lights there are other ways in which they can be powered. If you really want to do your bit for the environment then consider investing in the kinds that are powered through solar energy.

Benefit 4 - Along with these types of lights actually being very easy to install in many ways they use the same kinds of connections as conventional incandescent lights do. You will also find that they do not come with any of the complications often find when you choose to use fluorescent flood lights instead.

Benefit 5 - Everyone of the high power LED flood lights you can purchase today are fitted with a diode rather than with a filament or filled with inert gas. As a result these aren't actually releasing any kinds of gases into the air that could prove detrimental to someone's health.

Benefit 6 - As well as these forms of lights actually emitting a much brighter and whiter light they also are able to brighten up an area surrounding them a lot easier. Plus the actual emit light that is able to brighten up a much wider expanse. So rather than having to install several flood lights around your home you may find that 2 or 3 of the high power LED flood lights on offer today will provide ample illumination.

Above we have shown you just a few of the benefits of installing good quality high power LED floodlights [https://www.tanlite.com/] at your home. When it comes to their installation you should make sure that you position then around 8 to 10 feet off the ground to ensure that the light they emit will then be shining downwards steeply so ensuring that they shine light on to a much larger area.

[tanlite00]

High-Powered LED Flood Light - The Most Effective And Affordable Solution For Your Home and Office

LED Lights are highly efficient and a much better option than a normal tube light or bulb which does not only consume a greater amount of electricity but also heats much faster, and has a very low levels of durability. This is exactly the reason why many residences, as well as large scale and small scale companies, have now begun to opt for overall installation of High-powered LED Flood Lights. These lights have found to save almost as much as 70 to 80% on your electricity bills. If you own a spacious house or office, you will definitely have the requirement of appropriate lighting. Imagine the length of saving you would be able to make with the help of these special lights that gives an extremely bright and unique look to the entire surrounding bet it indoors or outdoors.

All kinds of LED lights have the capacity to give greater luminosity and brightness, which an ordinary neon light or even the incandescent light would be unable to provide. Another very important factor associated with installing an LED Flood Light with motion sensors in your household as well as most high profile official areas, is to grant higher protection from thefts or burglary. LED Lights also do not tend to get heated too quickly which is a common occurrence with incandescent as well as neon lights. Therefore whether you install these lights at a residential or a commercial area, they would always ensure to keep your surrounding cool.

Although installation of LED lights may cost a bit higher than the ordinary neon lights, but these installation charges are worthwhile as compared to the longer lasting benefits that these lights may provide. It has been estimated that a good quality High Powered Flood Light lasts in good condition for as much as 11 years, although depending on their variety, there are ones that can also be very reliable to be used for 5 to 6 years. They are also available in wide range of shapes, sizes and colors of your choice. It is quite obvious that LED lights are expensive than a neon light, but the durability of an LED light is 10 times more than the ordinary ones which is why paying a higher price for these lights would be an intelligent decision.

LED Flood Lights have a huge demand these days, especially for commercial locations like restaurants, shopping malls and also in medical institutions and hospitals. But it is also very important to be able to find a good quality LED light [https://www.tanlite.com/] that includes all the features mentioned above. There are several LED light manufacturers one may come across; hence the selection needs to be made after undertaking thorough research and reliability of the company.

[tanlite00]

LED Lighting - Enlightening the World

Light Emitting Diode, which is conveniently called as LED lights in electronic term is a semi conductor light that emits light as soon as an electric current is applied to it. They are extensively used as indicator lights on electronic devices and also in higher power applications as in case of flashlights and area lighting. As per the technological methodology, an LED is a light source which can be infrared, visible or ultra violet. The color is determined by the composition and condition of the semi conducting material used. Discovered in the year 1907 by H.J Round, a British experimenter, earlier these bulbs were used as replacements for incandescent indicators only.

Methodology

The white color of the LED bulbs come from a narrow band blue that is emitted naturally by GaN LEDs. The yellow on the other hand is generated by a phosphor coating on the die which absorbs a proportion of the blue and converts it to yellow. These GaN die are able to produce operational wavelengths from green to ultraviolet by varying the relative amounts of indium and gallium during production. When electric applied in the forward direction of the device it results in a form of electro luminescence where incoherent and narrow-spectrum light is discharged from the p-n junction in a solid state material.

Advantages

LED technology has taken the world to a whooping stage of development as it is very useful in conservation of energy and pollution. Some of the important advantages of the bulb are -

1. LED lights are more efficient when compared to the conventional bulbs and tube lights. They produce more light per watt against an incandescent bulb and this facet makes it very useful when used in battery powered or energy-saving devices.

2. This technology has the capacity of emitting various colors of light without the use of colors filters that traditional lighting methods require, thus saving initial costs.

3. Due to their small size, they can be easily placed and they also light up very quickly and achieve full brightness in microseconds.

4. These LED light have a better cycling life as compare to incandescent bulbs and also radiate much less heat in the process of switching on and off.

5. They have a better life span around 35,000 to 50,000 hours of useful life and LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs as in comparison to incandescent lights.

6. These lights are shock resistant and the solid package of the LED can be designed to focus its light. The fact that they are non toxic (do not contain mercury) also favors the application of these bulbs.

Disadvantages

However, withstanding all the advantages, there are certain short comings faced by these LED lights as well. they are listed below -

1. As compared to incandescent bulbs the LEDs are much more expensive and its execution largely depends on the ambient temperature of the operating environment. They require adequate heat sinking in order to make it more durable.

2. These LEDs are also voltage sensitive and one needs to be vigilant as they involve series of resistors or current-regulated power supplies. As they work on the mechanism of area light source, it becomes difficult for them to operate in spherical light field.

3. Of recent it is being observed by the scientists that blue and cool white LEDs emit blue light hazard that is unsafe for eyes. The cool white LED lights should not be used for outdoor lighting near astronomical observatories. Together these lights have certain limitations that are termed as blue pollution.

Applications

LED lights are perhaps the most advanced technology that is taking its tool over the people all over the world. Their application is diverse and hence they can be divided in three distinct categories - Visual signal application where the lights transpires from the bulb to the human eyes directly, Illuminations where LED light is reflected from an object to give visual response and finally, technological approach that does not require the contact with human visual system as in case of light photosynthesis in plants.

In the past decade, LED technology has expanded its scope to almost every household in the world. From little red spots that tells one that the wi fi connection is on, to the excellent light source that we see in our rooms just by switching on a plug, applications of LED is ubiquitous. Production quality LEDs are now capable of efficiencies of around 70 lm/W, compared with 12 lm/W for incandescent light bulbs, and single die devices are producing over 100 lm

Today one can find the implication of these LED lights in many areas. Be it the LCD screen of the computers or the latest version of the mobile phones, be it Ipods or safety and security hardware like LED enabled drainage system or Led micro lights for reading at nights, LED technology is vast and growing by leaps and bounds. The newest trend in the electronic market is the green influence that has not left the LED world bereft. The most recent launches in the LED market are theLight bulbs that can help one save up to 90% of electricity costs plus reduce the heat output and even more than this the bulbs claim to last up to 10 times longer than a standard light bulb or compact fluorescent. Some of the most advanced LED enabled products in the electronic world are -

LED enabled Faucet Lights - Install this in your homes to give a new look to the monotonous water taps. Available in red and blue they are heat sensitive and alarm the user by changing colors, as soon as the water temperature goes above 89 degrees centigrade.

LED Jellyfish Mood Lamps - These are unique desktop tank that plays trick with the eyes by displaying three jellyfish that swim, with the aid of the 6 bright colorful LEDS [https://www.tanlite.com/] that are placed at the top of the tank.

[tanlite00]

Cave Tubing - Adventurers' Delight

Located in the heart of in Central America, the fun in Belize cannot be complete without Cave Tubing. Belize is one of the very few places in the entire world that offers this exhilarating experience. Over the last few years Cave Tubing has become the most popular shore excursion in Belize for adventure sports enthusiasts. The excitement of floating on a tractor inner-tube on a jungle river through a limestone cave is simply unparalleled.

If you are an adventure sports enthusiast Belize is a great place to spend your vacations. There are a number of Belize City hotels to choose from according to your budget. The people of this country are extremely hospitable and will make sure you have the time of your life. Many Belize City hotels even organize cave tubing trips for their guests.

A typical cave tubing excursion trip commences at Ambergris Cave early in the morning and you are headed to the mainland via a fast motorboat that cut across the bay to where the river meets the sea. Here you enter the river mouth and head up the river where you can see several rainforest animals, such as Crocodiles, Parrots and Iguanas.

Eventually when you reach the jungle camp, you are given your inner tube and other safety gear. After about 15 minutes of Hiking you come to the entrance to the ancient underground cave systems. This underground cave system was the worshiping place for Maya Indians who flourished in Belize from 250AD to 900AD. Once you are all set and geared up for cave tubing you are led by a guide who kicks off the excursion trip. Your inner tube floats down the river and into the underground caves revealing spectacular limestone formations and remarkable cave systems.

On the way back you may have the option of crossing the river by rope, which is an experience in itself [https://www.tanlite.com/]. At the end of the tubing excursion, you head back to the camp where you can change and get dry and have your meal.

[tanlite00]

All About LED Strips 5 - IP Protection For LED Strips

Brief introduction on IP grading

The IP Code consists of the letters IP followed by two digits and an optional letter. As defined in international standard IEC 60529, it classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. This standard aims to provide users more detailed information than commercial terms such as waterproof.

The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects:

0X: No protection against contact and ingress of objects. 1X: Protected against objects bigger than 50mm, such as any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part. 2X: Protected against objects bigger than 12.5mm, such as fingers or similar objects. 3X: Protected against objects bigger than 2.5mm, such as tools, thick wires, etc. 4X: Protected against objects bigger than 1mm, such as most wires, screws, etc. 5X: Dust protected. Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact. 6X: Dust tight. No ingress of dust; complete protection against contact.

The second digit indicates the level of protection of the equipment inside the enclosure against harmful ingress of water:

X0: Not protected against harmful ingress of water. X1: Protected against dripping water. Dripping water (vertically falling drops) shall have no harmful effect. X2: Protected against dripping water when tilted up to 15º. Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15º from its normal position. X3: Protected against spraying water. Water falling as a spray at any angle up to 60º from the vertical shall have no harmful effect. X4: Protected against splashing water. Water splashing against the enclosure from any direction shall have no harmful effect. X5: Protected against water jets. Water projected by a nozzle against enclosure from any direction shall have no harmful effects. X6: Protected against powerful water jets. Water projected in powerful jets against the enclosure from any direction shall have no harmful effects. X7: Protected during immersion up to 1 m. Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion). X8: Protected during immersion beyond 1 m. The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer.

Once briefly presented the different IP ratings we move to the aim of this article, which is to describe the most common IP ratings applied to strip lights and to help choosing a LED strip light based on this rating.

Which IP protection fits your strip project best?

Flexible strip LED products are generally offered in two or three versions (depending on how wide is the assortment of the manufacturer):

IP20: Without waterproof treatment on top of PCBs, normally fitted with "3M" adhesive tapes on backside, fit for indoor dry areas use only. Many manufacturers that do not offer an intermediate version between IP20 and IP68 claim that these strips are fit for indoor use in general, which is not a real statement and can generate failure of the installation. Humidity or occasional contact with water can happen in indoor areas such as Kitchens or Bathrooms and therefore, and therefore these areas require additional protection.

IP64: With crystal resin glue protected on top of PCBs, normally fitted with "3M" adhesive tapes on backside, fit for indoor wet areas installation. This option is not always offered by all manufacturers, but those who offer it find that it is more successful than IP20 since the same width of strip allows a higher protection on top of a nicer dispersion of the light through the resin. The IP rating of these strips can be further enhanced with a proper insulation of ends and interconnections, which is why some suppliers claim these strips have a higher rating, such as IP66 or IP67. However, please note that the real IP of these products, by themselves, is IP64.

IP68: With a silicon transparent tube protected and sealed at the ends. It can be either fully filled with glue or just inserted within a silicon tube, being the last option more practical in terms of interconnection and reducing the weight of the strips. It can either be sold with "3M" adhesive tapes on the backside or with silicon mounting brackets and DIY spare parts supplied. The adhesive tape option is not recommended since the weight of the IP68 strips is higher and can make the glue fixing fail in the mid term, which is even more probable in outdoor areas or of course [https://www.tanlite.com/], underwater. As a result, for a truly reliable outdoor installation, only mounting brackets should be considered. These strips are fit for outdoor and 1 meter underwater applications.

[tanlite00]

How To Choose Between CFL (Compact Fluorescent) And LED Light Bulbs

In the modern ear of energy crisis, there are mainly two types of bulbs being used domestically. The choice is between CFL, the compact fluorescent lamp or the LED the light emitting diode. Both are energy efficient but for a large spread of light on a wider area, FCL are more suitable. Although the physical size of each articles is almost many times the size of LED but is more practical on certain places.

To choose their applications, first we need to see how much we want illumination and equally we require economy as well. Usually CFL are used for lobby, dining areas, porches, bedrooms and even lounges. To have a larger coverage of light area, the larger one that is HCL must be adopted. LED right now cannot be used for the total illumination, as their technology has not reached the place where its global larger span illumination could be considered. Economy is there, in LED and in CFL, but usage is different, as the basic limitations are the space and financial budget to sustain the change.

Secondly anywhere intense light is not the requirement but durability, solid light is required, long term reliable association is required and economy plus space constraints are LEDs are the most suitable.

Physically the difference between the two is clear. The CFL are much larger in size as compared to single bulb of LED.

On high mounted or high ceiling places CFLs are more appropriate. One of the reasons is the larger coverage angle and secondly it gets saved from daily touching, of materials and human errors. CFL may break if subjected to sudden voltage surge or physical pressures. On the contrary, LEDs are not only small, but can withstand the jerks and jolts in certain capacity.

There is no doubt that they both produce light, both sources save energy and are efficient, but primarily due to the light intensity, coverage and design limitations each one has its own requirement in a certain specified areas. The CFL structure has hollow tube with small amount of gas and mercury coated on the inside of the glass tube. But the thickness of the glass is less than the thickness of the LED lens and glass canopy. This makes it very delicate and can break easily. On the other hand the LED [https://www.tanlite.com/] is pretty much robust and can bear a lot of rough handling without being damaged. But they do have a shorter life span!

[tanlite00]

Ways to Use Flat Rope LED Lights Outdoors

Flat rope LED lights are small bulbs that are placed evenly in a plastic tube. They can be used indoors or outdoors. LED stands for Light-emitting Diode. It was a Russian invention and as late as 1960 the United States began to utilize these types of lights. During the 1960's they only emitted the color red but due to the technology of today they are available now in many colors. They are made even by setting a series of one-half watt mini bulbs into a small tube, which can be translucent or transparent. The life of flat rope LED lights is usually twenty-five thousand hours of usage. They come in a kit with a power cord, pins to fix the rope to where you want it, power connector, and fifty feet light coil. They can be bent in almost shape that you want. These rope lights are very efficient, virtually unbreakable, durable, and environment-friendly. They are waterproof and use very low voltage.

There are many different ways you can use flat rope LED lights in your yard, which can include:

• They can be used to highlight the sides of your pavements so no one slips off the side of your sidewalks. You can use the solar-powered ones here. • Highlight your stairs by putting the rope lights alone the risers but make sure that you fit them correctly so people do not trip on them. • You can wrap two or more different lights on the tree branches and trunks to give your yard a festive look. • If your patio is poorly lit you can line the railings and sides with purple or blue rope lights as these two colors are classy and soothing • If you live near the waterfront highlight the ramps and docks with the flat rope LED lights. • You can also illuminate the borders of your swimming pool by outlining it with the rope lighting. • During the Christmas season you can decorate your bushes and trees with rope lights to resemble a decorated tree. • You can also make illuminated stars, wreaths, or snowflakes by using sturdy wire to make the frames and line the rope lights around them. Put them in your front yard for a festive look. • You can also make little bundles of the flat rope LED lights to resemble a sphere and hang several from the tree branches. • Put them around your window frames to jazz up your home on various holidays.

These are just some of the many ways in which you can use flat rope LED lights [https://www.tanlite.com/] to decorate your home and yard.

[tanlite00]

The Environment and LED Flood Lighting

Modernity will always come hand in hand with innovation. And what makes innovation possible is the development of science and technology. It seems that almost every aspect of life may either be explained by the latest medical discoveries, or improved with the use of the latest gadgets.

However, advocates believe that modernity is also to blame for the negative effects Mother Nature is currently trying to battle. In fact, global warming has taken worldwide recognition, and has already ignited several campaigns from environmentalists from all over the world.

Knowing the scale of such a global phenomenon, others are trying to help in the preservation of the environment through their own ways. One of the more common eco-friendly alternatives is the use of LED flood lighting.

Although a relatively new development, LED flood lighting has already gained popularity because of its many advantages.

Since light emitting diodes or LEDs are known to emit more lumens per watt, it has proven itself to be more efficient than other light bulbs or tubes. This results in saving energy and, in turn, allows the user to save money by the time the electric bill arrives.

Another known advantage of having LED flood lighting is its longevity. Experiments have shown that LEDs last at least ten times longer than other lighting alternatives. This makes LEDs more cost effective than standard light bulbs and tubes.

And since these floodlights are often used to illuminate stadiums and other large spaces, it is already an advantage that LEDs produce a white beam of light. This light is similar to that of daytime, which makes it easier on the eyes for everyone in the stadium.

A key advantage of the LED flood lighting in the preservation of Mother Nature is that it does not produce harmful carbon emissions. In the same way, the manufacture of these light bulbs did not make use of mercury and lead. This assures environmental advocates that residents living near LED manufacturing factories are breathing air that is free from any hazardous emissions.

Bulbs made of LEDs are also known to emit less heat. Standard bulbs usually convert the supplied energy into heat. This, in turn, may cause fire-related accidents. Since LEDs only produce a small amount of heat, this lessens the risk brought about by rising temperatures.

It may not seem like a big deal from how things are seen at present, but taking the future into consideration, one will realize that making the switch to LED flood lighting might actually play a part in the conservation of the Earth's natural resources.

The Earth has been in existence for millions of years. Not only has it provided people with shelter, but it has also provided them with enough food and water. However, the Earth is now in danger because of all these different forms of pollution.

Human beings are mere inhabitants of this wonderful creation; therefore, it is only fair that people take care of it [https://www.tanlite.com/]. If the environment is made to deteriorate in all these waste matter, where shall people live? Where else shall people get food and water? Now is the time to start to take care of the environment. No matter how small it may seem, if done continuously, it shall have a big effect in the long run.

[tanlite00]

How to Choose the Right LED Strip Light?

LED strip lights, ribbons or tapes have become one of the most popular LED products available on the market. They did not only replace incandescent ribbons, but some of the fluorescent tubes as well, and definitely gave endless options for advertisements and decoration of bars, hotels, and other public places. With the fast development of the LED technology, they are now available in very bright versions too, allowing users to apply it as task, or in rare cases, even as a main source of lighting. Their application is popular both in home and commercial use, therefore we collected the main characteristics of strip lights consumers need to consider if they want to make the right choice.

Depending on our purposes the following features may help us decide what we have to apply.

- The size or type of LED included - the number of LEDs within a metre of the strip - the colours or colour temperature of the LEDs - the flexibility of the strip - the direction of LEDs on the strip - carrying capacity - heavy duty - IP rating - Voltage - dimmers and controllers

Of all the determining factors mentioned above, the most important is probably the type and size of the LED included, both of which determine its brightness or performance. This difference has already been discussed in one of our previous articles on ArticleBase.com: how the performance of different LED technologies (low power, SMD power and high power) ranges, as well as the size of the diodes. Obviously, the more recent the technology of the LED is, and the bigger its size is, the brighter it will be.

Another determining factor of the performance is of course the number of LEDs in the strip within a metre for instance. The higher this number is, the brighter the strip is, though extremely high numbers within a metre often require special technologies, like double width strips - where the LED are placed not just one after the other but in two or three rows next to each other. With strips including a high number of LED always check their arrangement, because LEDs placed too close to each other may emit too much heat and radically shorten the lifespan of the strip.

The colour range of the LED is now endless, since any colour can be created with RGB technique. There are generally two or three shades of white available: bright or cold white - the bluish, really bright version of white, the warm white - which is rather yellowish like the sun, and the natural white - which is a combination of the two in various degrees. The temperature of the white colour is measured in Kelvin, and the higher colour temperatures (from about 5000 K) are the cold, or bluish whites and the lower ones (2700 - 3000 K) are the warmer white colours.

Single colour LEDs are available in almost all colours now, but the RGB LED strips can also emit a large variety of colours. RGB strips need a controller to operate, and decide whether the colour of the strip should be one constant colour, or should change along with setting the pace of change. Special pixel RGB strips are able to change the colour in a row, creating a run-down effect. The variety of colour changes of the RGB strip largely depends on the knowledge of the controller too.

The flexibility of the LED strips can be a determining factor in their application. Rigid strips are perfect for replacing fluorescent tubes for instance, though there is hardly anything you would not be able to do with a flexible strip either. On flat surfaces it is sometimes easier to work with rigid strips, though applied on ceilings or walls - I guess many of you have come across this problem before - what appears to be flat for the eye is far from straight once examined with a spirit level. So, flexibility is more often a grace than a burden. Strips are usually flexible to one dimension only, which is exactly she the direction of the LEDs can be significant. The most common types of strips have LEDs lighting upwards, so if for instance if you wish to enlighten a wheel you have to look for side-mounted or side-view strips to be able to shape them the right direction.

The carrying capacity of strips is generally very low. Heavy-duty strip lights are not usually sold for home use, but much rather for commercial use on ships and in factories for instance. In home use, where carrying capacity matters - on an edge of a stair for instance - the use of profiles is the common solution.

The IP rating of strips or any electric goods is made up of two numbers, indicating the degree of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures.

If you are planning to install strip lights at wet or humid places, outdoors, or maybe even under water, then your items need to be partially or completely waterproof. 100% waterproof items have the IP rating of 68.

The Voltage of LED strip lights should always be checked before application. Strips running at mains are often used, but most of the LED strips require a transformer, since they run at low voltage (usually 12 or 24 V). If your strips need a transformer, make sure it is suitable for LEDs, because electric transformers most of the time ruin LEDs.

The variety of moods or atmospheres that can be created with strip lights is incredibly large and a lot depends on the accessories you use with them, like dimmers or controllers. Although the largest variety of RGB effects are created with panels, where there is no limit to the effects used other than our imagination, there is a lot you can do with strips too, applying complex controllers, like the DMX, allowing you to set the rhythm of colour change to music. Dimming is always simply attainable, though most strips require a dimmer specifically manufactured for LEDs [https://www.tanlite.com/].

[tanlite00]

6 Types Of LED Lights

LED lights are loved by many people as they consume little energy and last for a long time. If you are looking for the units it's good to know that there are many types you can go for. The many types include:

Miniature LEDs

These are the indicators you see on mobile phones, remote controls, digital cameras, and television sets. Since they are small, they produce small light that is in the form of a long-range beam of light. The cool thing is that they are compatible with different types of circuit boards. They come in "ready to fit" mode thus you don't have to worry about how to install them.

LED strips

They feature high-powered LEDs that are mounted on a thin flexible circuit board using an adhesive coating. On first look, they resemble long strips with small twinkling stars. You can use them to decorate different rooms such as dance halls, kitchen, and the sitting area. There are some people that also use them to decorate their vehicles.

LED spotlights

These offer brightness and durability. They are made from tough materials and produce a lot of light ideal for you if you have a large showroom. They come in different colors that you can use to attract attention to the different areas of your product. They are also used in attracting attention in arenas.

Corn bulbs

They are known as corn bulbs as they resemble the ear of corn. Inside the bulb, there are 80-180 tiny lights that work together to produce a lot of light. You can use the bulbs anywhere but they are ideal when you install them in your house. Experts recommend them when you are looking for energy-efficient units that give you a lot of light under little maintenance.

Tube lights

They are slimmer and shorter than the regular lights thus you can install them in a wide range of areas. Some of the areas you can install them include conference rooms, homes and in the office. They are eco-friendly and last for a long time. Unfortunately, they don't produce a lot of light.

Panel lights

These are high-grade indoor lighting units [https://www.tanlite.com/] made from aluminum. They come in different powers such as 12W, 18W, 72W, 36W, 48W, 36Wand 85W. The good thing about them is that they are easy to install and last for a long time. According to the manufacturers, they last up to 50,000 hours.

[tanlite00]

How to Make an LED Light up Bottle

You can find lots of unusual things in bottles, ships and messages, so why not fill a bottle with LED lights? What a bright idea! This attractive bottle is a great talking point; it makes a nice table decoration or a festive night-light.

To make the LED light up bottle you will need... A clear glass bottle, a meter or so of tinsel, a loo roll or kitchen towel tube, glitter, PVA glue, and a set of 20 LED lights. You can get these ready made from with a battery compartment from the '99p Store' on your local high street. Tech confident people could make their own from individual components. DO NOT use mains fairy lights, this is a fire hazard!

First wash out the bottle and remove all the labels. Use a nice smelling detergent to rid the bottle of any lingering odours from its previous contents. Leave the bottle to drain and dry out completely.

Take the LED lights and the Tinsel, use a small amount of selotape and stick the wire directly behind the last LED bulb (the bulb furthest away from the battery compartment) to the end of the strip of tinsel.

Twist the string of lights and the tinsel loosely together and carefully push the lights and tinsel into the bottle until the battery compartment rests on the neck of the bottle.

The loo roll or kitchen towel tube will become a fancy bottle stopper that covers the battery compartment. Draw around the end of the tube onto a piece of card. A grocery box is great. Cut the disc out and push it into the end of the tube. Use a bit of selotape to hold it in place.

Cover the tube and end piece in PVA glue and sprinkle with glitter. Cover the cardboard completely so that it is no longer visible. Leave to dry.

Perch the battery compartment on top of the bottle and place the glitter bottle stopper over the top of it https://www.tanlite.com/, so that it hides the batteries and part of the neck of the bottle.

[tanlite00]

LED Light Bulbs Vs CFLs

Overview

Environmentally friendly options for replacing incandescent lights are usually both Compact Fluorescent Lamps (CFL) or Light Emitting Diode (LED) bulbs.

Compact Fluorescent Lamps

CFLs function in addition to standard fluorescent lamps in which energy is used to spark off mercury vapor that  resides inside the glass tube. The contemporary impacts the mercury atoms to make ultraviolet (UV) light which is not visible to the eye. The photons from the ultraviolet light hit a phosphor layer in the bulb housing to emit photons of visible mild thereby developing light output from the tube. The ultraviolet light might also reason fading in artwork or textiles. The mercury contained in the lamp means that the light bulbs need to be well disposed of as compact fluorescent bulbs dumped in landfills burst, causing mercury to be launched, draining into the ground, in the long run contaminating the meals chain. Some states, along with California, ban the disposal of mercury-containing bulbs inside the trash. Some state legal guidelines require fluorescent bulbs to be collected as hazardous waste or well recycled. Check with the EPA site that will help you with right disposal methods in keeping with your state, or you may discover a recycling center close to you at Earth911.

Unlike fluorescent tubes that don't include circuitry, compact fluorescent normally combine all the important circuits in the bottom of the mild permitting the unmarried unit to be used in a general incandescent light bulb socket. CFLs are available in a ramification of patterns and shapes, however one will often see them in a tube or spiral option. Higher floor location lets in for a better mild output in CFLs.

LED Lighting

Solid-kingdom lights, more generally referred to as LED (mild-emitting diode) lighting fixtures is a stable semiconductor mild source that does not use a gasoline tube like that of the CFL. Light from an LED is made while strength is carried out via the semi-conductor doped with impurities to create one 1/2 that's a "p-side", and any other 1/2 that forms the "n-side". The charge-vendors (electrons and holes) circulate the p-n junction where these  halves meet, and releases electricity within the shape of a photon, thereby creating mild. The coloration of the light output relies upon at the substances forming the p-n junction. There isn't any filament to burn out, and in contrast to CFLs, LED lights do no longer incorporate the toxic mercury, nor do they emit ultraviolet light.

To get a vibrant output, many older fashions of LED mild bulbs had resorted to clustering many individual LEDs right into a one housing, however some of the more moderen LED bulbs power a unmarried high powered LED element. These LED light bulbs are drastically smaller than their CFL opposite numbers, and are supplied in form factors that produce a directional beam through the usage of a tumbler or plastic lens, or encased in the back of a frosted diffuser to offer wider mild coverage.

Summary of Benefits

Less Expensive Electricity Bill:

Although the value of the mild bulbs are initially extra pricey, both CFL and LED lamps save you money long term. Less energy is used, and bulbs are being replaced tons much less regularly.  LEDs use about half of the amount of energy that CFLs that output the same brightness use.

Long Lifespan:

Run-times of CFL bulbs normally range from 6,000 hours to 15,000 hours while the typical lifespan of an incandescent lamp is around 1,000 hours. A LED lamp can closing 50,000 to 60,000 hours which equates to around five or 6 years (10 instances longer than a CFL).

High great mild output:

Both CFL and LED bulbs can now provide a number of colour temperatures. Consumers are now not restricted to the blueish, "cool-white", of in advance bulbs, and can now buy hotter coloured lamps. Lower great CFL bulbs that use a magnetic ballast will flicker.  Look for an electronic ballast while shopping for a CFL. LEDs are driven so they do not flicker.

Versatility:

Indoor, out of doors, domestic, or industrial LED and CFL bulbs may be utilized in a many exceptional sorts of applications in which conventional bulbs were once used. LED bulbs and CFLs may be used in tune lighting,  table lamps,   assignment lights, recessed fixtures, and ceiling furniture. Both forms of bulbs are available in dimmable models to be used with a widespread dimmer switch.

Durability:

Since LED mild bulbs don't use a filament like incandescent, they're surprise resistant and may be used in excessive vibration packages.

Summary of Drawbacks and Limitations

CFLs:

No spot lighting fixtures - Since CFLs do not undertaking a focused beam like an LED bulb, they're fine used for region lighting fixtures.

Temperature sensitivity - CFLs are touchy to heat, their lifetime will be decreased if the fixture does no longer properly deplete warmness. CFLs are also laid low with bloodless. CFLs will take substantially longer to attain complete brightness in bloodless climate.  In extreme conditions they will not nicely heat up.  

Warm-up time - LED lights turn on right away, whilst CFLs take a couple of minutes to heat up and provide complete brightness.

Hazardous waste - CFLs incorporate mercury and should be nicely disposed of. The EPA internet site affords proper disposal alternatives.  LEDs do not include mercury.

Frequent Cycling Lowers Lifespan - In high traffic areas, together with home toilets, in which CFLs are grew to become on and off often, their lifespan will lower quick.

Ultraviolet Light - CFL bulbs can emit UV-mild which might not be suitable for positive applications.

LEDs:

High preliminary price - The LED bulbs themselves are steeply-priced, but the initial investment is fast recuperated in decrease power payments.

Heat era - Certain excessive strength (5w and up) LED mild bulbs might also produce full-size heat. Heat-sinks are frequently constructed into the bulbs themselves https://www.tanlite.com/, and can require LED unique furnishings to make sure right air-go with the flow.