talktimburton-blog - Tumblr blog

talktimburton-blog · 5 years

Text

How to Paint a Room

Painting walls is an economical way to change the look and feel of a room. A fresh coat of paint can brighten up a little room or bring the heat to large areas. This House Depot guide provides you detailed guidelines on how to paint a space. You'll learn about dealing with wall paint and discover the paint tools you'll need like paint rollers, painter's tape, and paint trays. You'll see how to prep walls for paint and get useful painting suggestions for achieving an expert appearance.

Prep Your Walls

Effectively painting walls begins with removing whatever possible, consisting of all HVAC registers or outlet covers.

Carefully examine walls for fractures, holes, dents or other imperfections.

Use caulk or a lightweight spackling substance and putty knife to fill and fix any holes or flaws.

Remove excess spackling with the putty knife. Let dry completely.

Utilize a little piece of very great 220-grit sandpaper or a sanding sponge to smooth the repaired areas flush with the surface area.

Clean the walls tidy with a moist towel or sponge and allow them to dry.

Tip: Whenever you paint the interior of a home, make sure you are operating in an effectively-ventilated space. If the paint fumes are strong, use a respirator.

Apply Painter's Tape

Usage painter's tape to mask off your moldings, windows, doors, and ceiling. Always push the painter's tape down flat and even to prevent bleed-through.

For non-textured surface areas, mask it off where it fulfills the edge of the wall. Apply your painter's tape in other words, overlapping strips, pushing down securely along the edge.

If you're painting walls with a textured ceiling, merely run a screwdriver along the edge of the ceiling to create a little, undetectable, texture-free surface area. This will make developing a straight paint edge a lot easier.

If you're intending on having an accent wall, mask off the within the edge of that wall from the remainder of the room.

Tip: Select the best painter's or masking tape adhesion level for the task. Some are best for textured surface areas, while others are intended for more fragile locations like a freshly painted wall, ended up hardwood or wallpaper.

Spread Drop Cloths

Cover the floors with a ground cloth to secure them from paint drips and splatters. Move furnishings from smaller rooms or cover furnishings with more drop cloths in bigger spaces. Decrease your clean-up after painting a space with the right drop cloth.

Canvas ground cloth is extremely resilient and absorbent, so they can be recycled.

Plastic is resilient and cheaper however isn't absorbent, so spills can be tracked if stepped on.

Paper is the most economical however can tear quickly on floors, so it is perfect for covering lighting fixtures, cabinets, and furnishings.

Cut in with Primer

A crucial step in understanding how to paint a room is mastering the "cut in" painting process. Cutting in is laying out the room.

Use a paintbrush to create 2- to 3-inch bands around the edges, corners, and frames of a room.

When cutting in, you can try to do the whole room at one time. Nevertheless, your border locations will probably dry before you overlap them. This might lead to a small distinction in sheen since the two coats will not blend.

Tip: Make certain to use plastic safety glasses or goggles to safeguard your eyes from flying particles and paint droplets.

Prime Your Walls

Anytime you paint the interior of a home, it's a great concept to prime your walls. Guides are developed to assist seal the wall and prevent mold. A guide is vital if you wish to go from dark walls to light or white walls. The majority of brands offer paint and primer in one.

Start painting the guide in 3- x 3-foot sections. With a filled paint roller, work top to bottom, rolling back and forth throughout the wall in a series of V- or W-shaped strokes up until the area is covered.

Roll in one area at a time, moving from top to bottom and from one side of the wall to the other.

Refill your roller and paint the next area, covering only as much as you can finish while the primer is still damp. Constantly overlap areas of damp guide.

Tip: Guides can be tinted at your local Home Depot shop to carefully match the color of your paint. Considering that the guide is less expensive than paint, a tinted guide may decrease your expense to paint.

Sand Primer

After the primer dries, lightly sand away bumps and ridges using great grit sandpaper folded into quarters.

When the grit of one section becomes covered with dust, switch to an unused section and continue.

Clean the wall clean with a damp towel or sponge and allow it to dry.

Collect your tools and wall paint.

Tip: Re-mix your paint frequently using a mixing stick or a paint mixing tool. You must do this any time you leave your paint sitting for a prolonged period.

Cut in and Paint Walls

Paint walls one at a time. You'll attain a smoother, more smooth look since you'll be able to blend the damp paint you've brushed on with wet paint you're rolling. This is one of the best painting techniques for walls and is called "working to a wet edge."

Working leading to bottom, rolling back and forth across the wall in a series of V- or W-shape strokes till the area is covered.

Before refilling your roller and relocating to the next area, roll over the location you've simply painted in a smooth, continuous stroke from leading to bottom. These smoothing strokes even the coat and aid to cover up lines and tracks.

Overlap locations already painted, lightly lift the roller off the wall to avoid leaving end marks and to seamlessly blend different areas.

Wait 2-4 hours for the very first coat to dry before applying the 2nd coat. Follow the same process and techniques utilized when priming your walls. Blend your sections as you go.

Tip: Keep your color uniform. When you have utilized half a gallon of paint, fill up that can with paint from a different can and mix. If you're doing a large job, blend several gallons into one 5-gallon pail.

Finish up and Clean

Remove your painter's tape right before or right after the paint dries entirely. If left on too long, small pieces of the tape can tear and get left behind when being removed. Firmly seal staying paint in cans, thoroughly tidy paintbrushes and rollers with warm soapy water, and dispose of used painter's tape.

Tip: Utilize a utility knife to slice through any dried-on painter's tape while pulling it up at a 45-degree angle.

0 notes