#taurusamplification

[toneproshop]

Taurus Stomphead SH-5. Custom Edition AU$1 600.00 #taurusamplification #amplification #ecw83004172 #ecwid The Ultimate Compact AmplifierThe Stomp-Head 5 is an ultra light, very compact floor amplifier with integrated foot-switch designed to be set on the pedal board along with effects or placed directly on the stage floor. It greatly benefits the player with immediate access to all amp’s potentiometers and options. When the amp is set on the pedal board only one wire (speaker wire) is needed to setup the guitar sound on stage. This amplifier can also be placed on a top of a cabinet like a regular head. In this case external footswitch must be connected.The Stomp-Head’s 5 design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create powerful guitar amplifiers in very compact shape. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. We offer players a fully analog amplifier with extremely light weight, very compact dimensions and powerful sound. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.The Stomp-Head 5 features three channels: CLEAN, CLASSIC LEAD and HIGH GAIN LEAD, which are accessible by footswitches built into the amp’s chassis or by an external controller.Each channel represents different sound characteristics which give a great freedom in obtaining a desired sound’s texture of the instrument. The amp is designed to produce a wide arrey of different sounds. From a classic, clean jazzy sound throughout modern DRIVE, up to heavy saturated HIGH GAIN like distortion.Other than a regular three point EQ (BASS, MIDDLE, TREBLE) each channel is equipped with MID/RANGE switches which are designed to change the range of the MIDDLE frequencies. This option is very useful in proper setting of the guitar’s sound in a bands overall mix depending on the style of music played and type of guitar used. Additionally the highest frequency range of the guitar can be altered by the BRIGHT/DARK switch. Unit is equipped with power selector that allows to set 90 (at Canberra, Australian Capital Territory) https://www.instagram.com/p/BojDU6BFD-i/?utm_source=ig_tumblr_share&igshid=14d654uib4ayv

[metalguitartv]

With this amplifier the videos sound as well as you can check in my youtube channel 👉MetalGuitarTV👈 Happy Sunday my Friends!!!! #videos #channel #youtube #youtubers #youtuber #taurusamp #taurusamplification #gibson #gibsonsunday #lespaul #guitarist #guitarist #guitar #guitarhero #happysunday #heavy #heavymetal #metal #metalhead

[toneproshop]

Taurus Stomphead SH-5. Custom Edition AU$1 600.00 #taurusamplification #amplification #ecw83004172 #ecwid The Ultimate Compact AmplifierThe Stomp-Head 5 is an ultra light, very compact floor amplifier with integrated foot-switch designed to be set on the pedal board along with effects or placed directly on the stage floor. It greatly benefits the player with immediate access to all amp’s potentiometers and options. When the amp is set on the pedal board only one wire (speaker wire) is needed to setup the guitar sound on stage. This amplifier can also be placed on a top of a cabinet like a regular head. In this case external footswitch must be connected.The Stomp-Head’s 5 design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create powerful guitar amplifiers in very compact shape. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. We offer players a fully analog amplifier with extremely light weight, very compact dimensions and powerful sound. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.The Stomp-Head 5 features three channels: CLEAN, CLASSIC LEAD and HIGH GAIN LEAD, which are accessible by footswitches built into the amp’s chassis or by an external controller.Each channel represents different sound characteristics which give a great freedom in obtaining a desired sound’s texture of the instrument. The amp is designed to produce a wide arrey of different sounds. From a classic, clean jazzy sound throughout modern DRIVE, up to heavy saturated HIGH GAIN like distortion.Other than a regular three point EQ (BASS, MIDDLE, TREBLE) each channel is equipped with MID/RANGE switches which are designed to change the range of the MIDDLE frequencies. This option is very useful in proper setting of the guitar’s sound in a bands overall mix depending on the style of music played and type of guitar used. Additionally the highest frequency range of the guitar can be altered by the BRIGHT/DARK switch. Unit is equipped with power selector that allows to set 90 (at Canberra, Australian Capital Territory)

[toneproshop]

Taurus Stomphead SH-3HG. High Gain AU$1 045.45 #taurusamplification #amplification #ecw104898557 #ecwid The New definition of guitar amps !!!Until today, guitarists could only choose between two types of amplifiers: heads and combos. Now, we are introducing a completely new breed: The Stomp-Head.The Stomp-Head 3.HG is an ultra light, very compact floor amplifier with integrated foot-switch designed to be set on the pedalboard along with effects or placed directly on the stage floor. An amplifier-equipped pedalboard provides a complete ready-to-use sound system. Simply connect a speaker cabinet, guitar and power source, then the system is ready to go.The amplifier can be also placed in a traditional way as a “Head” amp, on the top of the speaker cabinet. Stomp-Head 3.HG (3 footswitches)Technology Master Tube DesignPower output: 60W RMS with a power brake to 25W,16 and 7WPower Stage Efficiency: 130WattAuto detection speakers’ impedance2 channels: CLEAN and LEAD3 different sounds: CLEAN, CRUNCH and DRIVE3 footswitches: CHANNEL [Clean/ Lead], BOOST, MUTEInput GAIN BOOSTEFFECT LOOPLINE OUTPUT with speaker simulationHEADPHONES OUTPUTAdditional input for external channel selector/controllerPHONES OUTPUTPhones AUX INPUTHEADPHONE AUX INPUTWherever you go, keep your sound on you!The Stomp-Head 3.High Gain is an extremely light and small but still powerful and great sounding guitar amplifier. SH3.HG design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create great sounding, powerful, fully analog amplifiers with extremely light weight and very compact dimensions. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.The guitarist has an access to two channels (CLEAN and LEAD) chosen by footswitch. CLEAN channel gives a choice of two different sounds: CLEAN or slightly distorted CRUNCH which can be smoothly adjusted by a GAIN potentiometer Two additional foot switches are assigned to control BOOST and MUTE func (at Canberra, Australian Capital Territory)

[toneproshop]

Taurus Stomphead SH-5. Custom Edition AU$1 600.00 #amplification #taurusamplification #ecw83004172 #ecwid The Ultimate Compact AmplifierThe Stomp-Head 5 is an ultra light, very compact floor amplifier with integrated foot-switch designed to be set on the pedal board along with effects or placed directly on the stage floor. It greatly benefits the player with immediate access to all amp’s potentiometers and options. When the amp is set on the pedal board only one wire (speaker wire) is needed to setup the guitar sound on stage. This amplifier can also be placed on a top of a cabinet like a regular head. In this case external footswitch must be connected.The Stomp-Head’s 5 design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create powerful guitar amplifiers in very compact shape. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. We offer players a fully analog amplifier with extremely light weight, very compact dimensions and powerful sound. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.The Stomp-Head 5 features three channels: CLEAN, CLASSIC LEAD and HIGH GAIN LEAD, which are accessible by footswitches built into the amp’s chassis or by an external controller.Each channel represents different sound characteristics which give a great freedom in obtaining a desired sound’s texture of the instrument. The amp is designed to produce a wide arrey of different sounds. From a classic, clean jazzy sound throughout modern DRIVE, up to heavy saturated HIGH GAIN like distortion.Other than a regular three point EQ (BASS, MIDDLE, TREBLE) each channel is equipped with MID/RANGE switches which are designed to change the range of the MIDDLE frequencies. This option is very useful in proper setting of the guitar’s sound in a bands overall mix depending on the style of music played and type of guitar used. Additionally the highest frequency range of the guitar can be altered by the BRIGHT/DARK switch. Unit is equipped with power selector that allows to set 90 (at Canberra, Australian Capital Territory) https://www.instagram.com/p/BvqtzIsnUgW/?utm_source=ig_tumblr_share&igshid=1skbeqdmte3ow

[toneproshop]

Taurus Qube - 300 Bass Head AU$636.36 #amplification #taurusamplification #ecw91795894 #ecwid Taurus Qube - 300 bass head is the smallest and the lightest bass amplifier in Taurus's amps line. The compact size of the head is attained by applying the newest, most advanced SMPS (Switch Mode Power Supply) power supply and Class D power amplifier in conjuction with classic analog preamp provide great efficency, power, dynamics and sound selectivity. As all Taurus amps, the Qube - 300 is very easy to operate. The MLO system equalization control achieves easy and intuitive tailored sound using only bass and treble potentiometers. This sound correction simplifies finding the right tone colour of the instrument.300W RMS - class D + (SMPS) (weight 1,7kg)Power output: 300W RMS / 4ohm , 200W RMS / 8ohmMain Features: analog preamp / PA class-D / SMPSInputs: passive & activeControls:GAIN controlVOLUME controlBASS and TREBLE equalizer with "MLO system" (Middle-range Level Optimization).Triple BASS-switch to reduce or boost low frequency [DBS-cut/OFF/DBS-boost]Triple TREBLE-switch to reduce or boost high frequency [CUT/OFF/PRESENCE]PUNCH button - increases sonic expression. Two different sound modes available Punch-1 and Punch-2MLO EQ - TECH INFO: BASS: 40Hz +/-10dB @400Hz -/+4dB BASS Boost/Cut: 60Hz +/-6dB MIDDLE: 2kHz +7dB / 550Hz -7dBTREBLE: 6kHz +15dB / 8kHz -15dB,TREBLE Boost/Cut: 6kHz +8dB/-10dBPUNCH Low (A): 300Hz +6dBPUNCH High(B): 950Hz +6dBOther features:MUTE buttonCLIP indicatorProtections: short circuit, thermal overload, power overloadForced cooling systemCasing dimensions: [H x W x D] 66x200x155mmOverall dimensions: [H x W x D] 66x200x180mmWeight: 1.7 kg (at Australian Capital Territory) https://www.instagram.com/p/BuLK2wSn9A5/?utm_source=ig_tumblr_share&igshid=17juxzzyq6ush

[toneproshop]

Taurus Stomphead SH-3HG. High Gain AU$1 045.45 #amplification #taurusamplification #ecw104898557 #ecwid The New definition of guitar amps !!!Until today, guitarists could only choose between two types of amplifiers: heads and combos. Now, we are introducing a completely new breed: The Stomp-Head.The Stomp-Head 3.HG is an ultra light, very compact floor amplifier with integrated foot-switch designed to be set on the pedalboard along with effects or placed directly on the stage floor. An amplifier-equipped pedalboard provides a complete ready-to-use sound system. Simply connect a speaker cabinet, guitar and power source, then the system is ready to go.The amplifier can be also placed in a traditional way as a “Head” amp, on the top of the speaker cabinet. Stomp-Head 3.HG (3 footswitches)Technology Master Tube DesignPower output: 60W RMS with a power brake to 25W,16 and 7WPower Stage Efficiency: 130WattAuto detection speakers’ impedance2 channels: CLEAN and LEAD3 different sounds: CLEAN, CRUNCH and DRIVE3 footswitches: CHANNEL [Clean/ Lead], BOOST, MUTEInput GAIN BOOSTEFFECT LOOPLINE OUTPUT with speaker simulationHEADPHONES OUTPUTAdditional input for external channel selector/controllerPHONES OUTPUTPhones AUX INPUTHEADPHONE AUX INPUTWherever you go, keep your sound on you!The Stomp-Head 3.High Gain is an extremely light and small but still powerful and great sounding guitar amplifier. SH3.HG design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create great sounding, powerful, fully analog amplifiers with extremely light weight and very compact dimensions. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.The guitarist has an access to two channels (CLEAN and LEAD) chosen by footswitch. CLEAN channel gives a choice of two different sounds: CLEAN or slightly distorted CRUNCH which can be smoothly adjusted by a GAIN potentiometer Two additional foot switches are assigned to control BOOST and MUTE func (at Canberra, Australian Capital Territory) https://www.instagram.com/p/BtJpXWYHNWf/?utm_source=ig_tumblr_share&igshid=xxvkl8q0l0xs

[toneproshop]

Taurus Qube - 300 Bass Head AU$636.36 #amplification #taurusamplification #ecw91795894 #ecwid Taurus Qube - 300 bass head is the smallest and the lightest bass amplifier in Taurus's amps line. The compact size of the head is attained by applying the newest, most advanced SMPS (Switch Mode Power Supply) power supply and Class D power amplifier in conjuction with classic analog preamp provide great efficency, power, dynamics and sound selectivity. As all Taurus amps, the Qube - 300 is very easy to operate. The MLO system equalization control achieves easy and intuitive tailored sound using only bass and treble potentiometers. This sound correction simplifies finding the right tone colour of the instrument.300W RMS - class D + (SMPS) (weight 1,7kg)Power output: 300W RMS / 4ohm , 200W RMS / 8ohmMain Features: analog preamp / PA class-D / SMPSInputs: passive & activeControls:GAIN controlVOLUME controlBASS and TREBLE equalizer with "MLO system" (Middle-range Level Optimization).Triple BASS-switch to reduce or boost low frequency [DBS-cut/OFF/DBS-boost]Triple TREBLE-switch to reduce or boost high frequency [CUT/OFF/PRESENCE]PUNCH button - increases sonic expression. Two different sound modes available Punch-1 and Punch-2MLO EQ - TECH INFO: BASS: 40Hz +/-10dB @400Hz -/+4dB BASS Boost/Cut: 60Hz +/-6dB MIDDLE: 2kHz +7dB / 550Hz -7dBTREBLE: 6kHz +15dB / 8kHz -15dB,TREBLE Boost/Cut: 6kHz +8dB/-10dBPUNCH Low (A): 300Hz +6dBPUNCH High(B): 950Hz +6dBOther features:MUTE buttonCLIP indicatorProtections: short circuit, thermal overload, power overloadForced cooling systemCasing dimensions: [H x W x D] 66x200x155mmOverall dimensions: [H x W x D] 66x200x180mmWeight: 1.7 kg (at Canberra, Australian Capital Territory) https://www.instagram.com/p/BrKGv_HHdzo/?utm_source=ig_tumblr_share&igshid=1avt2gxwzupaf

[toneproshop]

Taurus Qube - 300 Bass Head AU$636.36 #amplification #taurusamplification #ecw91795894 #ecwid Taurus Qube - 300 bass head is the smallest and the lightest bass amplifier in Taurus's amps line. The compact size of the head is attained by applying the newest, most advanced SMPS (Switch Mode Power Supply) power supply and Class D power amplifier in conjuction with classic analog preamp provide great efficency, power, dynamics and sound selectivity. As all Taurus amps, the Qube - 300 is very easy to operate. The MLO system equalization control achieves easy and intuitive tailored sound using only bass and treble potentiometers. This sound correction simplifies finding the right tone colour of the instrument.300W RMS - class D + (SMPS) (weight 1,7kg)Power output: 300W RMS / 4ohm , 200W RMS / 8ohmMain Features: analog preamp / PA class-D / SMPSInputs: passive & activeControls:GAIN controlVOLUME controlBASS and TREBLE equalizer with "MLO system" (Middle-range Level Optimization).Triple BASS-switch to reduce or boost low frequency [DBS-cut/OFF/DBS-boost]Triple TREBLE-switch to reduce or boost high frequency [CUT/OFF/PRESENCE]PUNCH button - increases sonic expression. Two different sound modes available Punch-1 and Punch-2MLO EQ - TECH INFO: BASS: 40Hz +/-10dB @400Hz -/+4dB BASS Boost/Cut: 60Hz +/-6dB MIDDLE: 2kHz +7dB / 550Hz -7dBTREBLE: 6kHz +15dB / 8kHz -15dB,TREBLE Boost/Cut: 6kHz +8dB/-10dBPUNCH Low (A): 300Hz +6dBPUNCH High(B): 950Hz +6dBOther features:MUTE buttonCLIP indicatorProtections: short circuit, thermal overload, power overloadForced cooling systemCasing dimensions: [H x W x D] 66x200x155mmOverall dimensions: [H x W x D] 66x200x180mmWeight: 1.7 kg (at Canberra, Australian Capital Territory) https://www.instagram.com/p/BrKGv_HHdzo/?utm_source=ig_tumblr_share&igshid=1avt2gxwzupaf

[toneproshop]

Taurus Stomphead SH-2.CL Classic Edition AU$681.82 #taurusamplification #amplification #ecw83004200 #ecwid The Stomp-Head 2 Classic is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which allowed us to create powerfull guitar amplifiers in very compact shape. This technology uses all the significant features of tubes which determine the classic sound of guitar amps. We offer players a fully analog amplifier with extremely light weight, very compact dimensions and powerful sound. The sound characteristics and power of our MASTER TUBE based amplifiers are equal to the classic tube amps with the same power rating.Guitarist has an access to two channels: CLEAN and LEAD, while CLEAN channel gives two different sounds: CLEAN or slightly distorted CRUNCH type. CRUNCH can be smoothly adjusted by a potentiometer.The Stomp-Head is equipped with two foot switches installed on the chassis. The first one allows quick channel switching, while the second mutes the amp. CLEAN and LEAD channel can be also selected by external controler.Unit is equipped with power selector that allows to set 60Watt or 25Watt and it is designed to work with 4, 8, and 16 ohm cabinets (Power Amp will auto-adjust to speakers impedance)Stomp-Head can be used also as a guitar preamp without connecting speaker cabinet.LINE OUT with a speaker cabinet simulation allows the connection of the amplifier to a mixer or an external power amp. LINE OUT signal simulates the sound of the 4x12 CELESTION Vintage 30 cabinet. Device is also equipped with a serial effect loop.Power output - 60 Watt / 4ohm, 8ohm,16ohmPower brake to 25WattAuto detection speakers impedanceTubes: 12AX72 channels: CLEAN and LEAD2 footswitches: CHANNEL [Clean/ Lead], MUTECLEAN channel controls: BASS, MIDDLE, TREBLE, CRUNCH, VOLUMELEAD channel controls: DRIVE, BASS, MIDDLE, TREBLE, VOLUME PRESENCE mode switch Input GAIN boostSerial effect loopLINE OUTPUT with speaker simulationAdditional input for external channel selector/controllerPower output selectorDimensions: [H x W x Dl] 80 x 290 x 190 mmWeight: 1.8kg (at Canberra, Australian Capital Territory) https://www.instagram.com/p/BojC7p7FQ_h/?utm_source=ig_tumblr_share&igshid=16jzjk95y33o3

[toneproshop]

Taurus Qube - 300 Bass Head AU$636.36 #taurusamplification #amplification #ecw91795894 #ecwid Taurus Qube - 300 bass head is the smallest and the lightest bass amplifier in Taurus's amps line. The compact size of the head is attained by applying the newest, most advanced SMPS (Switch Mode Power Supply) power supply and Class D power amplifier in conjuction with classic analog preamp provide great efficency, power, dynamics and sound selectivity. As all Taurus amps, the Qube - 300 is very easy to operate. The MLO system equalization control achieves easy and intuitive tailored sound using only bass and treble potentiometers. This sound correction simplifies finding the right tone colour of the instrument.300W RMS - class D + (SMPS) (weight 1,7kg)Power output: 300W RMS / 4ohm , 200W RMS / 8ohmMain Features: analog preamp / PA class-D / SMPSInputs: passive & activeControls:GAIN controlVOLUME controlBASS and TREBLE equalizer with "MLO system" (Middle-range Level Optimization).Triple BASS-switch to reduce or boost low frequency [DBS-cut/OFF/DBS-boost]Triple TREBLE-switch to reduce or boost high frequency [CUT/OFF/PRESENCE]PUNCH button - increases sonic expression. Two different sound modes available Punch-1 and Punch-2MLO EQ - TECH INFO: BASS: 40Hz +/-10dB @400Hz -/+4dB BASS Boost/Cut: 60Hz +/-6dB MIDDLE: 2kHz +7dB / 550Hz -7dBTREBLE: 6kHz +15dB / 8kHz -15dB,TREBLE Boost/Cut: 6kHz +8dB/-10dBPUNCH Low (A): 300Hz +6dBPUNCH High(B): 950Hz +6dBOther features:MUTE buttonCLIP indicatorProtections: short circuit, thermal overload, power overloadForced cooling systemCasing dimensions: [H x W x D] 66x200x155mmOverall dimensions: [H x W x D] 66x200x180mmWeight: 1.7 kg (at Canberra, Australian Capital Territory)

[toneproshop]

Taurus Stomphead SH-3HG. High Gain AU$1 045.45 #taurusamplification #amplification #ecw104898557 #ecwid The New definition of guitar amps !!!Until today, guitarists could only choose between two types of amplifiers: heads and combos. Now, we are introducing a completely new breed: The Stomp-Head.The Stomp-Head 3.HG is an ultra light, very compact floor amplifier with integrated foot-switch designed to be set on the pedalboard along with effects or placed directly on the stage floor. An amplifier-equipped pedalboard provides a complete ready-to-use sound system. Simply connect a speaker cabinet, guitar and power source, then the system is ready to go.The amplifier can be also placed in a traditional way as a “Head” amp, on the top of the speaker cabinet. Stomp-Head 3.HG (3 footswitches)Technology Master Tube DesignPower output: 60W RMS with a power brake to 25W,16 and 7WPower Stage Efficiency: 130WattAuto detection speakers’ impedance2 channels: CLEAN and LEAD3 different sounds: CLEAN, CRUNCH and DRIVE3 footswitches: CHANNEL [Clean/ Lead], BOOST, MUTEInput GAIN BOOSTEFFECT LOOPLINE OUTPUT with speaker simulationHEADPHONES OUTPUTAdditional input for external channel selector/controllerPHONES OUTPUTPhones AUX INPUTHEADPHONE AUX INPUTWherever you go, keep your sound on you!The Stomp-Head 3.High Gain is an extremely light and small but still powerful and great sounding guitar amplifier. SH3.HG design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create great sounding, powerful, fully analog amplifiers with extremely light weight and very compact dimensions. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.The guitarist has an access to two channels (CLEAN and LEAD) chosen by footswitch. CLEAN channel gives a choice of two different sounds: CLEAN or slightly distorted CRUNCH which can be smoothly adjusted by a GAIN potentiometer Two additional foot switches are assigned to control BOOST and MUTE func

[toneproshop]

Taurus Stomphead SH-3.CL Classic AU$1 000.00 #taurusamplification #amplification #ecw104898490 #ecwid The New definition of guitar amps !!!Until today, guitarists could only choose between two types of amplifiers: heads and combos. Now, we are introducing a completely new breed: The Stomp-Head.The Stomp-Head 3.CL is an ultra light, very compact floor amplifier with integrated foot-switch designed to be set on the pedalboard along with effects or placed directly on the stage floor. An amplifier-equipped pedalboard provides a complete ready-to-use sound system. Simply connect a speaker cabinet, guitar and power source, then the system is ready to go.The amplifier can be also placed in a traditional way as a “Head” amp, on the top of the speaker cabinet. Stomp-Head 3.CL (3 footswitches)Technology Master Tube DesignPower output: 60W RMS with a power brake to 25W,16 and 7WPower Stage Efficiency: 130WattAuto detection speakers’ impedance2 channels: CLEAN and LEAD3 different sounds: CLEAN, CRUNCH and DRIVE3 footswitches: CHANNEL [Clean/ Lead], BOOST, MUTEInput GAIN BOOSTEFFECT LOOPLINE OUTPUT with speaker simulationHEADPHONES OUTPUTAdditional input for external channel selector/controllerPHONES OUTPUTPhones AUX INPUTHEADPHONE AUX INPUTWherever you go, keep your sound on you!The Stomp-Head 3.Classic is an extremely light and small but still powerful and great sounding guitar amplifier. SH3.CL design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create great sounding, powerful, fully analog amplifiers with extremely light weight and very compact dimensions. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.The guitarist has an access to two channels (CLEAN and LEAD) chosen by footswitch. CLEAN channel gives a choice of two different sounds: CLEAN or slightly distorted CRUNCH which can be smoothly adjusted by a GAIN potentiometer Two additional foot switches are assigned to control BOOST and MUTE function (at Canberra, Australian Capital Territory)

[toneproshop]

Taurus T-Di Plus Mk2 Bass preamp & Di-Box + compressor AU$300.00 #taurusamplification #taurus #ecw92386672 #ecwid An ideal, “must have” tool for a bassist at work. The preamp with MLO tone correction plus compressor is designed to fulfill all studio and stage needs of bass players. This is a stomp box containing the most important tools to create perfect bass sound. Very flexible EQ section plus the compressor are providing a wide range of sound characters and dynamic adjustments. From extremely dynamic and saturated to highly compressed , as well as the VINTAGE type with its soft tube-overdriven character.The Bass engine can be connected and used in different ways:As an additional sound module connected to the input of the amplifierAs a preamp connected simultaneously to the amplifier and the mixer via the line-out jack / XLRConnected straight to the mixer as a main source of sound without necessity to use a bass amp on stageLEVEL volume level knobCHRACTER “Mix knob” between “Vintage” & “Modern”soundGAIN-COMP input gain control with compression adjustmentBASS low frequency level control with MLO systemTriple BASS-switch to reduce or boost low frequencyCUT/OFF/BOOST Triple BASS-switch to reduce or boost low frequency[DBS-cut/OFF/DBS-boost]Triple BASS-switch to reduce or boost low frequencyCUT/OFF/BOOSTTREBLE high frequency level control with MLO systemTriple TREBLE-switch to reduce or boost high frequencyCUT/OFF/PRESENCEPUNCH midrange effectiveness switchFOOTSWITCH MODE true bypass/mute footswitch mode selectorMLO EQ - TECH INFO:BASS: 40Hz +/-8dB @450Hz -/+4dB BASS Boost/Cut: 60Hz +/-6dB TREBLE: 4,5kHz +15dB / 6kHz -15dBTREBLE Boost/Cut: 7kHz +/-6dBPUNCH: 300Hz +7dB POWER SUPPLY VOLTAGE RANGE 9-12V: any power supply with power rating between 9 and 12V can be usedDC ASSISTANT - protects from loss of signal. Effect switches automatically to the "bypass mode" in case of disconnection or low voltage of DC supply. Subsonic filter: built-in filter which cuts-off very low frequencies which have an adverse impact on the proper work of the speakers. Thanks to the filter, the unwanted frequencies and the accompanied components of the DC voltage are eliminated from the s (at Canberra, Australian Capital Territory)

[toneproshop]

Taurus Qube - 300 Bass Head AU$636.36 #taurusamplification #amplification #ecw91795894 #ecwid Taurus Qube - 300 bass head is the smallest and the lightest bass amplifier in Taurus's amps line. The compact size of the head is attained by applying the newest, most advanced SMPS (Switch Mode Power Supply) power supply and Class D power amplifier in conjuction with classic analog preamp provide great efficency, power, dynamics and sound selectivity. As all Taurus amps, the Qube - 300 is very easy to operate. The MLO system equalization control achieves easy and intuitive tailored sound using only bass and treble potentiometers. This sound correction simplifies finding the right tone colour of the instrument.300W RMS - class D + (SMPS) (weight 1,7kg)Power output: 300W RMS / 4ohm , 200W RMS / 8ohmMain Features: analog preamp / PA class-D / SMPSInputs: passive & activeControls:GAIN controlVOLUME controlBASS and TREBLE equalizer with "MLO system" (Middle-range Level Optimization).Triple BASS-switch to reduce or boost low frequency [DBS-cut/OFF/DBS-boost]Triple TREBLE-switch to reduce or boost high frequency [CUT/OFF/PRESENCE]PUNCH button - increases sonic expression. Two different sound modes available Punch-1 and Punch-2MLO EQ - TECH INFO: BASS: 40Hz +/-10dB @400Hz -/+4dB BASS Boost/Cut: 60Hz +/-6dB MIDDLE: 2kHz +7dB / 550Hz -7dBTREBLE: 6kHz +15dB / 8kHz -15dB,TREBLE Boost/Cut: 6kHz +8dB/-10dBPUNCH Low (A): 300Hz +6dBPUNCH High(B): 950Hz +6dBOther features:MUTE buttonCLIP indicatorProtections: short circuit, thermal overload, power overloadForced cooling systemCasing dimensions: [H x W x D] 66x200x155mmOverall dimensions: [H x W x D] 66x200x180mmWeight: 1.7 kg

[toneproshop]

Taurus T-Di Plus Mk2 Bass preamp & Di-Box + compressor AU$300.00 #taurusamplification #taurus #ecw92386672 #ecwid An ideal, “must have” tool for a bassist at work. The preamp with MLO tone correction plus compressor is designed to fulfill all studio and stage needs of bass players. This is a stomp box containing the most important tools to create perfect bass sound. Very flexible EQ section plus the compressor are providing a wide range of sound characters and dynamic adjustments. From extremely dynamic and saturated to highly compressed , as well as the VINTAGE type with its soft tube-overdriven character.The Bass engine can be connected and used in different ways:As an additional sound module connected to the input of the amplifierAs a preamp connected simultaneously to the amplifier and the mixer via the line-out jack / XLRConnected straight to the mixer as a main source of sound without necessity to use a bass amp on stageLEVEL volume level knobCHRACTER “Mix knob” between “Vintage” & “Modern”soundGAIN-COMP input gain control with compression adjustmentBASS low frequency level control with MLO systemTriple BASS-switch to reduce or boost low frequencyCUT/OFF/BOOST Triple BASS-switch to reduce or boost low frequency[DBS-cut/OFF/DBS-boost]Triple BASS-switch to reduce or boost low frequencyCUT/OFF/BOOSTTREBLE high frequency level control with MLO systemTriple TREBLE-switch to reduce or boost high frequencyCUT/OFF/PRESENCEPUNCH midrange effectiveness switchFOOTSWITCH MODE true bypass/mute footswitch mode selectorMLO EQ - TECH INFO:BASS: 40Hz +/-8dB @450Hz -/+4dB BASS Boost/Cut: 60Hz +/-6dB TREBLE: 4,5kHz +15dB / 6kHz -15dBTREBLE Boost/Cut: 7kHz +/-6dBPUNCH: 300Hz +7dB POWER SUPPLY VOLTAGE RANGE 9-12V: any power supply with power rating between 9 and 12V can be usedDC ASSISTANT - protects from loss of signal. Effect switches automatically to the "bypass mode" in case of disconnection or low voltage of DC supply. Subsonic filter: built-in filter which cuts-off very low frequencies which have an adverse impact on the proper work of the speakers. Thanks to the filter, the unwanted frequencies and the accompanied components of the DC voltage are eliminated from the s