#spyderco comparison | Explore Tumblr posts and blogs

autisticplumeriaartthings-blog · 5 years ago

Text

Through the years, I’ve observed that in polite society once I whip out a folding knife to open a box or minimize a unfastened thread, most individuals’s reactions are some variation of “Oh God, why do you have/need/carry that?” My standard reply is that a knife is probably the most useful gizmo on the planet, however I’ve found that regardless of how “non-threatening” wanting the knife is, I nonetheless get that same response. Subsequently, why not carry no matter I would like?

Purchase the Bestech Malware at BladeHQ

So, a month in the past I put down my already scary-looking Microtech Ultratech OTF switchblade and picked up the critically murder-ey wanting Bestech Malware.

The Malware was designed for Bestech Knives by Todd Knife and Device. TKT was began in 2016 by prolific knife reviewer Teryl Todd (Zelrick42 on YouTube) and his brother Seth Todd. They went from being followers to designers, and have a completely trendy firm. Teryl lives in Ozark, Missouri, and Seth lives in Houston, Texas. They jointly design their knives by sharing 3D CAD information online, then Seth makes physical prototypes that they each check. TKT have developed a distinct visual type additionally obvious of their We Knife Co. made Roxi folder, and in the many prototype photographs shared on the toddknifeandtool Instagram account.

Basic Dimensions & Blade Details

The Malware’s blade is 3.875” (9.8 cm) lengthy, the blade stock thickness is zero.15” (3.9mm), and it’s full open size is eight.75” (22 cm). The lengthy stabby blade folds right into a titanium handle, the blade pivots on ball bearings, and it’s framelock has a steel lockbar insert. The steel lockbar insert is a theoretically replaceable part that protects the titanium framelock from rubbing towards the lock face of the metal blade. My expertise has been that always a titanium framelock rubbing towards a metal blade tends to “stick” in place, but steel on metal doesn’t have the identical drawback.

Here is a measurement comparison with a large Sebenza Insingo:

It weighs 3.68 oz. which is technically a bit greater than a Spyderco Paramilitary 2 or a Chris Reeve Knives giant Sebenza, nevertheless it feels lighter than either of them in the hand. I attribute this feeling to the load stability of this knife. If I’m holding the Malware in a traditional thumb-on-top grip, and I slowly open my hand, the knife won’t fall to the ground, however will stay balanced on my index finger. This almost good weight distribution helps the Malware really feel very agile in my hand.

The titanium pocket clip is configured without any consideration aspect, tip up solely, however there are devoted left handed versions as nicely. I have the “Ti Black” model. The titanium backspacer and pocket clip are anodized a brassy gold colour, and contrast nicely towards the black stonewashed finish of the rest of the knife. The stonewashed remedy provides the sides and corners a worn-in look just like Kershaw Knives’ “blackwash” end.

It’s blade metal is S35VN, which was developed specifically for high-end knife blades by steelmaker Crucible Industries and Chris Reeve Knives. It’s a powdered metallic metal, which has the benefit of extra uniform mixing of it’s parts (iron, niobium, chromium, vanadium, and so forth.) than typical steel. The top-user advantages of this manufacturing process and the S35VN formulation are wonderful blade toughness (it could actually take successful without breaking or bending), corrosion resistance, and edge retention.

So it’s a contemporary production knife made in China with premium supplies and it’s priced accordingly at $196 on BladeHQ. What makes it totally different than every other new “Kizer, Reate, We, and Rike knife? Type and details.

What I really like about good pocketknives is that they’re pieces of useful artwork you possibly can maintain in your hand. The Malware is filled with fascinating details and I hold noticing more. The design is a wierd futuristic mixture of curves, straight strains, and, as on the chopping edge of the blade, straight strains that nearly imperceptibly turn into curves. The blade has a finger choil which, although it’s just a little too small for my index finger, is the complete three.9mm width of the blade stock, which is yet one more design detail that I respect.

Handle, Ergonomics, & Pocket Clip

In footage, the handle seems very thin, and within the days between ordering the Malware and receiving it, I questioned if it will be too small to properly wrap my medium-large-ish palms round. When it arrived, I discovered that it fills my hand very properly, and the lengthy, flat clip doesn’t create much of a hotspot any approach I maintain it.

Some edges are fairly squared off, just like the machining on the backspacer, however virtually each part of the deal with that comes in contact with my hand is chamfered, making it fairly snug to carry. And the extra I’ve it in my arms, the extra I maintain discovering new useful design particulars that I had, at first look, written off as being cosmetic- just like the three holes in the present aspect near the flipper tab. Those holes are precisely where my right thumb needs traction when flipping the knife open.

On the lock aspect of nearly all framelock knives, there’s a machined indentation in the frame that permits the locking a part of the frame to flex inward and lock the blade open. A number of knives cowl this indentation with their pocket clips, but as yet one more example of how nicely thought out this design is, the pocket clip on the Malware sits proper above, however not masking, the indentation. So when gripping the knife to flip it open, my ring finger is of course pushed into that square indentation, which provides me a secure grip when flipping it open.

I don’t ordinarily use my pocketknives for food prep, but in the spirit of thoroughness I sliced up some veggies with it. The blade has a full flat grind and will get very thin at the backside, which made slicing straightforward. The ergonomics for basic food prep have been superb so long as I didn’t try to unfold anything- the thin blade undoubtedly doesn’t work as a butter knife. The flipper tab extends under the leading edge, so it could’t actually be used for dicing both, however kitchen work is clearly not this knife’s meant use.

The pocket clip is moderately lengthy and thin and has more flex to it than some other milled clip I’ve dealt with. The good news is that it doesn’t chew up my (already chewed up) pants pockets, however the dangerous information is that it looks like it might easily get bent.

I carried this knife throughout a T.C.C.C. medic class, and once we have been learning how you can improvise tourniquets, I used the Malware as a windlass (the stiff piece that you simply twist to tighten the tourniquet.) Regardless of really cranking this factor down tight on my coaching associate’s arm, I had no worry of the knife breaking or bending till the trainer decided to point out the category the best way to tie off the top of the improvised tourniquet using the pocket clip. He was bending the clip approach out and jamming material beneath it, and I desperately needed to ask him to cease so he didn’t break it. I resisted this urge as a result of I didn’t need to look like a weenie to our super-badass Los Angeles SWAT Medic instructor. So he manhandled the clip, and when he was carried out, it simply sprung again to it’s normal state. It might be skinny and flexible, however it’s not fragile.

General, the Malware isn’t an “overbuilt” knife like a Hinderer Knives XM or a Strider SMF, nevertheless it’s undoubtedly harder than it appears.

Deployment & Lockup

A gripe I have with every single framelock flipper is if I grip it in such a approach that I’m putting a variety of strain with my center finger on the entrance of the lock near the pivot, then the knife becomes very troublesome to flip open. The worst offender on this entrance that I have is a Brad Zinker midtech model of the Boker City Trapper. The one knife I have that is resistant to this drawback is my GiantMouse GM1, which is an superior knife general, however maybe solves this drawback by having a weak detent which makes it troublesome to flip open. Nevertheless, the ergonomics of the Malware naturally place my fingers the place they don’t get in the best way of the mechanism in any respect.

The Malware’s flipper tab is comparatively small however has comfortably rounded jimping that gives good traction for flipping. The quantity of detent rigidity that needs to be overcome to flip the knife open is tough for me to objectively define- however subjectively, I feel it flips perfectly. The Malware’s framelock engages at about 40%, which you’ll be able to jam over to about 60% when you’re frightened about it slipping (not that that’s ever occurred to me or anyone I know.)

I don’t carry a knife specifically for self protection, however I need to say that I definitely by no means felt under-prepared while carrying the Malware on the bizarre streets of Los Angeles. It’s never by accident opened whereas in my pocket or whereas drawing it out of my pocket. It’s flipped and locked open securely every single time I’ve flipped it. I don’t assume an particularly scary-looking knife like this is going to make a nasty man run away in terror, however it’s an extended, mean wanting blade with an enormous handle I can get a really agency grip on. So I’ll add self protection to the Malware’s growing listing of constructive attributes.

Bestech Malware Review – Remaining Thoughts

I carried the Malware day-after-day for a month and primarily used it for un-challenging tasks like opening packages, slashing open luggage of cat meals, and as an improvised medical gadget. On the end of the month, the end on blade, deal with, and clip are unblemished. The S35VN blade was nonetheless very sharp in most locations, but after a quick, ham-fisted contact up on a Wicked Edge sharpener, it’s again to 100%. There’s no sharpening choil, however I don’t actually care if the previous few millimeters of my blade are super sharp.

What’s the Bestech Malware made to do? I don’t need to sound like a knife snob a-hole, but I tend to match every little thing to my Chris Reeve Knives Sebenza 21. The word “Sebenza” is literally the Zulu phrase for “work”, and the Sebenza looks like an indestructible precision software. The Bestech knife doesn’t really feel like a device, it seems like a blatantly offensive weapon that may additionally open packing containers from Amazon. Malware is the right identify for this knife because it’s so badass. Not flaming skull badass, however sci-fi villain badass. It brings to thoughts futuristic heavy metallic music by the band Voivod, it’s like the knife model of the Area Marines’ rifle from the film Aliens, it ought to be a weapon in the DOOM video video games, and I clearly really prefer it.

The deciding factor for anyone contemplating shopping for the Malware is certainly it’s looks- when you instantly prefer it’s vibe, I say get it. Nothing is perfect (except kittens), however the Malware excelled at every part I needed it to do, and appeared super-murder-ey doing it. Really helpful!

Bestech Knives Malware – From $196.00 From: BladeHQ

Editor: I like to recommend purchasing the Bestech Knives Malware at BladeHQ. Please think about that purchasing something by means of any of the links on this web site (including Amazon) helps help BladeReviews.com, and keeps the location going. As all the time, any and all help is tremendously appreciated. Thank you very much.

Concerning the Writer: This guest evaluate was written by John Burridge. John lives in Los Angeles and has a deep passion for knives. I plan on including to this section to include more information about John and where to seek out him. In the meantime, I hope you enjoyed this in depth assessment.

Associated

The post Bestech Knives Malware Review

#Blog #flipper #Folding Knives #framelock #Made in China #S35VN #Tactical Knives #titanium #Titanium Frame Lock Knives

0 notes

jimr-drumr · 5 years ago

Photo

Size comparison: Spyderco Bob Lum Chinese folder vs Lil Lum #foldingknife #knifestagram #knives https://www.instagram.com/p/By3mbVNBpwp/?igshid=s4qyjopnud7c

#foldingknife #knifestagram #knives

0 notes

reporthive-blog · 7 years ago

Text

Global Army Knives Market Research Report 2017

In this report, the global Army Knives market is valued at USD XX million in 2016 and is expected to reach USD XX million by the end of 2022, growing at a CAGR of XX% between 2016 and 2022.

Geographically, this report is segmented into several key Regions, with production, consumption, revenue (million USD), market share and growth rate of Army Knives in these regions, from 2012 to 2022 (forecast), covering North America Europe China Japan Southeast Asia India

Request Sample Of This Report @ https://www.reporthive.com/enquiry.php?id=1135431&req_type=smpl

Global Army Knives market competition by top manufacturers, with production, price, revenue (value) and market share for each manufacturer; the top players including Victorinox WENGER BUCK Ka-bar Benchmade Spyderco Gerber Strider MadDog Cold Steel Al Mar BOKER Chris Reeve Extrema Ratio Leatherman Microtech Mission SOG T.O.P.S Hogue

On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into Folding Knives Unfolding Knives

On the basis of the end users/applications, this report focuses on the status and outlook for major applications/end users, consumption (sales), market share and growth rate for each application, including Military Civil

If you have any special requirements, please let us know and we will offer you the report as you want.

Enquiry For Discount @ https://www.reporthive.com/enquiry.php?id=1135431&req_type=disc

Table of Contents

1 Army Knives Market Overview 1.1 Product Overview and Scope of Army Knives 1.2 Army Knives Segment by Type (Product Category) 1.2.1 Global Army Knives Production and CAGR (%) Comparison by Type (Product Category)(2012–2022) 1.2.2 Global Army Knives Production Market Share by Type (Product Category) in 2016 1.2.3 Folding Knives 1.2.4 Unfolding Knives 1.3 Global Army Knives Segment by Application 1.3.1 Army Knives Consumption (Sales) Comparison by Application (2012–2022) 1.3.2 Military 1.3.3 Civil 1.4 Global Army Knives Market by Region (2012–2022) 1.4.1 Global Army Knives Market Size (Value) and CAGR (%) Comparison by Region (2012–2022) 1.4.2 North America Status and Prospect (2012–2022) 1.4.3 Europe Status and Prospect (2012–2022) 1.4.4 China Status and Prospect (2012–2022) 1.4.5 Japan Status and Prospect (2012–2022) 1.4.6 Southeast Asia Status and Prospect (2012–2022) 1.4.7 India Status and Prospect (2012–2022) 1.5 Global Market Size (Value) of Army Knives (2012–2022) 1.5.1 Global Army Knives Revenue Status and Outlook (2012–2022) 1.5.2 Global Army Knives Capacity, Production Status and Outlook (2012–2022)

2 Global Army Knives Market Competition by Manufacturers 2.1 Global Army Knives Capacity, Production and Share by Manufacturers (2012–2017) 2.1.1 Global Army Knives Capacity and Share by Manufacturers (2012–2017) 2.1.2 Global Army Knives Production and Share by Manufacturers (2012–2017) 2.2 Global Army Knives Revenue and Share by Manufacturers (2012–2017) 2.3 Global Army Knives Average Price by Manufacturers (2012–2017) 2.4 Manufacturers Army Knives Manufacturing Base Distribution, Sales Area and Product Type 2.5 Army Knives Market Competitive Situation and Trends 2.5.1 Army Knives Market Concentration Rate 2.5.2 Army Knives Market Share of Top 3 and Top 5 Manufacturers 2.5.3 Mergers & Acquisitions, Expansion

Enquiry For Report Purchase @ https://www.reporthive.com/enquiry.php?id=1135431&req_type=purch

About Us

We are a leading repository of market research reports and solutions catering to industries like Comm & Technology, Energy & Power, Food And Beverages, Automotive & Transportation, Healthcare & Life Science etc. This large collection of reports assists organizations in decision-making on aspects such as market entry strategies, market sizing, market share analysis, competitive analysis, product portfolio analysis and opportunity analysis among others. We also assist in determining the best suited and targeted report from our large repository of global reports, company-specific reports and country-level reports.

Mike Ross Marketing Manager [email protected] http://www.reporthive.com Phone: +1 312–604–7084 Sainath Nagar, Vadgaon Sheri, Pune, Maharashtra 411014

0 notes

electricoutdoors · 5 years ago

Text

Spyderco Shaman – A Blend of Spyderco’s Best Knives

Spyderco Shaman

The Spyderco Shaman is the big brother of the Native. If you’re a fan of slightly larger EDC blades, then you’re going to love the Shaman!

The blade is held open with Spyderco’s compression lock and knife fits well in most size hands. Overall, it’s a great knife for almost anyone. [wc_toggle title=“Table of Contents” padding=“” border_width=“” class=“” layout=“box”]

Spyderco Shaman

Who should be Interested in the Spyderco Shaman?

Features

Spyderco Shaman Pros

Spyderco Shaman Cons

Conclusion

[/wc_toggle]

Spyderco, Shaman, Blade, Black, Knife, knife, Knives, Folding, Native, G-10, Compression, blade, Plain, Lock, folding, design, C229GP, spyderco, shaman, S30V, CPM, CPM-S30V, Pocket, larger, Edge, G10, steel, Handle, scales, proven, handle, Length, knives, reviews, pocket, custom, review, comparison, native, blade, manix, deep carry, black blade, paramilitary 2, size, spyderedge, compression, translucent blue, benchmade, clip, chris blade, pm2, native 5, manix 2

Who should be Interested in the Spyderco Shaman?

If you’re in the market for an EDC knife that comes in on the larger side and can handle some heavy work, then the Spyderco Shaman should be on your shortlist of knives to consider.

It’s large enough to do the hard tasks and still small enough to be comfortable after carrying it all day long. In our opinion, it’s a great blade that fits most people’s EDC needs.

Features

The Spyderco Shaman has an 8 ¼" overall length, comes in at just over 4.5" when it’s closed and weights 5.2 ozs.

The blade is made of S30V steel and is 3.58" long. The sharpened edge is 3.12" which leaves enough room at the bottom of the blade for a good-sized finger choil. At a little over 1/8" thick, the Shaman’s blade is on the hefty side yet it still has a sharp, fine tip for more delicate work if needed.

Spyderco claims that the blade has a full-flat grind but it isn’t a true full-flat grind. The top of the blade has enough of a flat edge to make locking it into certain knife sharpeners possible.

The handle is made of G-10 and shaped to make it feel great in the hand. The compression locking mechanism is located on the back of the handle.

You can carry knife in either a tip-up or tip-down position and on the left or right side. So no matter how you prefer to carry your knives, you’re in luck.

Spyderco Shaman Pros

The Spyderco Shaman is easy to open and close with one hand like most Spiderco Knives.

Available in serrated and straight blade designs and either a stainless steel finish or Spyderco’s Diamond-Like Carbon Coating. The Diamond-Like Carbon Coating is strong and holds up well under hard use.

The handle is smooth enough to feel great in the hand but still has enough texture to make it feel secure when you’re working with it.

The jimping on the blade and finger choil allow you to choke up on the knife so you can do finer work when needed.

Made in America.

Spyderco Shaman Cons

For some people, the Shaman is probably a little on the large size. If you’re looking for a dainty little pen knife then this isn’t going to be for you. If you want a smaller knife that’s going to mostly be used in the office it will still work for you, but it’s going to up to personal preference.

The main drawback of the Shaman is the sharp edge of the pocket clip. The handle itself feels great in the hand, but it’s ruined by the pocket clip in most positions. There are other clips available from third-party manufacturers that will fix this problem but it’s something that you shouldn’t have to worry about with a knife that runs around $200.

youtube

Conclusion

Overall, the Spyderco Shaman is one of the better knives available these days for EDC. (It’s my current go-to EDC knife.) It’s made in America, has a good-sized blade that thick and strong enough for tough work yet it can handle smaller jobs that require finesse just as well.

Did our Spyderco Shaman review help you decide if it was the knife for you? Let us know in the comments section.

The previous article Spyderco Shaman – A Blend of Spyderco’s Best Knives is republished from: readylifestyle-staging.gtgrgq9c-liquidwebsites.com

Spyderco Shaman – A Blend of Spyderco’s Best Knives published first on https://readylifesytle.tumblr.com

0 notes

ariellblogus · 5 years ago

Text

Purchase the Bestech Malware at BladeHQ

So, a month in the past I put down my already scary-looking Microtech Ultratech OTF switchblade and picked up the critically murder-ey wanting Bestech Malware.

Basic Dimensions & Blade Details

Here is a measurement comparison with a large Sebenza Insingo:

Handle, Ergonomics, & Pocket Clip

General, the Malware isn’t an “overbuilt” knife like a Hinderer Knives XM or a Strider SMF, nevertheless it’s undoubtedly harder than it appears.

Deployment & Lockup

Bestech Malware Review – Remaining Thoughts

Bestech Knives Malware – From $196.00 From: BladeHQ

Associated

The post Bestech Knives Malware Review

#Blog #flipper #Folding Knives #framelock #Made in China #S35VN #Tactical Knives #titanium #Titanium Frame Lock Knives

0 notes

moonlifesims4ccfinds · 5 years ago

Text

Purchase the Bestech Malware at BladeHQ

So, a month in the past I put down my already scary-looking Microtech Ultratech OTF switchblade and picked up the critically murder-ey wanting Bestech Malware.

Basic Dimensions & Blade Details

Here is a measurement comparison with a large Sebenza Insingo:

Handle, Ergonomics, & Pocket Clip

General, the Malware isn’t an “overbuilt” knife like a Hinderer Knives XM or a Strider SMF, nevertheless it’s undoubtedly harder than it appears.

Deployment & Lockup

Bestech Malware Review – Remaining Thoughts

Bestech Knives Malware – From $196.00 From: BladeHQ

Associated

The post Bestech Knives Malware Review

#Blog #flipper #Folding Knives #framelock #Made in China #S35VN #Tactical Knives #titanium #Titanium Frame Lock Knives

0 notes

marketnewsandtrends-blog · 6 years ago

Text

Global Zytel Handle Folding Knives Industry Trends, Growth Prospects Till, 2018 : Radiant Insights, Inc

4-Oct-2018

This report focuses on top manufacturers in global market, with production, price, revenue and market share for each manufacturer, covering

Schrade

SOG Specialty Knives & Tools

Smith & Wesson

NDZ Performance

Columbia River Knife & Tool

Case

Buck Knives

Gerber

Kershaw

TAC Force

WarTech

The X Bay

Spyderco

Tiger USA

Benchmade

On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into

Tactical Folding Knives

Traditional Folding Knives

Customize Folding Knives

Others

Request a Sample Copy of This Report:

https://www.radiantinsights.com/research/global-zytel-handle-folding-knives-market-professional-survey-report-2018/request-sample

By Application, the market can be split into

Personal Use

Commerical Use

By Regions, this report covers (we can add the regions/countries as you want)

North America

Europe

China

Japan

Southeast Asia

India

Table of Contents

Global Zytel Handle Folding Knives Market Professional Survey Report 2017

1 Industry Overview of Zytel Handle Folding Knives

1.1 Definition and Specifications of Zytel Handle Folding Knives

1.1.1 Definition of Zytel Handle Folding Knives

1.1.2 Specifications of Zytel Handle Folding Knives

1.2 Classification of Zytel Handle Folding Knives

1.2.1 Global Zytel Handle Folding Knives Production (K Units) and Growth Rate (%) Comparison by Types (2012-2023)

1.2.2 Global Zytel Handle Folding Knives Production Market Share (%) by Types in 2017

1.2.3 Tactical Folding Knives

1.2.4 Traditional Folding Knives

1.2.5 Customize Folding Knives

1.2.6 Others

1.3 Applications of Zytel Handle Folding Knives

1.3.1 Global Zytel Handle Folding Knives Consumption (K Units) Comparison by Applications (2012-2023)

1.3.2 Personal Use

1.3.3 Commerical Use

1.4 Global Zytel Handle Folding KnivesMarket by Regions (2012-2023)

1.4.1 Global Zytel Handle Folding Knives Market Size and Growth Rate (%) Comparison by Regions (2012-2023)

1.4.2 North AmericaZytel Handle Folding Knives Status and Prospect (2012-2023)

1.4.3 EuropeZytel Handle Folding Knives Status and Prospect (2012-2023)

1.4.4 ChinaZytel Handle Folding Knives Status and Prospect (2012-2023)

1.4.5 JapanZytel Handle Folding Knives Status and Prospect (2012-2023)

1.4.6 Southeast AsiaZytel Handle Folding Knives Status and Prospect (2012-2023)

1.5 Global Zytel Handle Folding Knives Market Size (2012-2023)

1.5.1 Global Zytel Handle Folding Knives Revenue (Million USD) Status and Outlook (2012-2023)

1.5.2 Global Zytel Handle Folding Knives Capacity, Production (K Units) Status and Outlook (2012-2023)

Browse Full Research Report With TOC:

https://www.radiantinsights.com/research/global-zytel-handle-folding-knives-market-professional-survey-report-2018

2 Industrial Chain Analysis

2.1 Industry Chain Structure of Zytel Handle Folding Knives

2.2 Raw Material Analysis of Zytel Handle Folding Knives

2.2.1 Raw Material A Market Analysis

2.2.2 Raw Material B Market Analysis

2.2.3 Raw Material C Market Analysis

2.3 Labor Cost Analysis of Zytel Handle Folding Knives

2.4 Other Costs Analysis of Zytel Handle Folding Knives

2.5 Manufacturing Cost Structure Analysis of Zytel Handle Folding Knives

2.6 Manufacturing Process Analysis of Zytel Handle Folding Knives

2.7 Raw Materials Sources of Zytel Handle Folding Knives Major Manufacturers in 2017

2.8 Downstream Buyers of Zytel Handle Folding Knives

If you have any special requirements, please let us know and we will offer you the report as you want.

#Zytel Handle Folding Knives Industry #Zytel Handle Folding Knives Industry Size #Zytel Handle Folding Knives Industry Analysis #Zytel Handle Folding Knives Industry Trend

0 notes

myqualitycollectioncrown · 7 years ago

Text

Ontario RAT 2 Review

Ontario Knife Company has been manufacturing knives for over 100 years, and while they may not be alone in that distinction, their ability to shift focus and adapt to the changing demands of the modern knife owner has been spot on. Their most popular and visible line of products has been made in conjunction with Randall’s Adventure Training (RAT), with lead designer Jeff Randall. While primarily composed of fixed blade knives, there are a couple of folding gems to be found in the RAT Model I and my favorite the RAT Model II (aka RAT 2).

Get the RAT 2 at Amazon

The RAT 1 was designed first and foremost to be a sturdy, hard-use knife that can take a beating, and it does that with flying colors. But for those of us who prefer a more slimline, lightweight pocket knife, Ontario offers the RAT 2, a scaled down version of the RAT 1. In short, the RAT 2 features all of the great ergonomics, materials, and action of the original, packed into a size that’s friendly to pockets.

Ontario RAT 2

Blade

Handle

Design

Value for Money

Bargain

Few other folding knives offer the performance, fit and features of the RAT 2 at this price point.

Key Specs

Blade length: 3.00 inches

Overall length: 7.00 inches

Closed length: 4.125 inches

Weight: 2.75 ounces

Blade material: AUS-8

Handle material: Nylon

Locking mechanism: Liner Lock

County of origin: Taiwan

Price range: About $30

The RAT 2 hits the sweet spot of simple but effective knife design with it’s 3-inch blade, 7-inch length and all coming in under 3 ounces.

The Blade

The RAT 2 features a classic gentle drop point style blade, and it fits so well on such a utilitarian knife. The design philosophy of Jeff Randall is all about use in the field, and whether that entails something as intensive as cleaning game or making feather sticks, or something as simple as cutting cordage for a shelter, the drop point blade was made for it.

The choice to produce the blade with a full flat grind also lends to its simple and useful aesthetic, increasing its slicing ability and making field sharpening a walk in the park. Speaking of field sharpening, I absolutely breezed through putting an edge back on this knife thanks to the AUS-8 steel, which can take a razor edge with minimal effort, and hold it fairly well.

The AUS line of steels are manufactured in Japan and shipped worldwide to a number of popular knife making companies, with AUS-8 being the most popular these days. What that means to most consumers is a wildly different experience depending on who’s producing the knife, owing to the differences between how they choose to heat treat the steel. I have no issue saying this, however; Ontario has easily the best AUS-8 blade I have ever used, thanks to the fantastic job they do of heat treating this material to around 59 HRC.

While the AUS-8 steel is no match for some of the more popular premium steels like S30V or even 154CM, it does have its advantages in the ease of sharpening, impressive resistance to corrosion, and of course price.

Handle and Ergonomics

Noryl GTX, Valox, Nylon 6, Thermoplastic… call it what you will, knife making companies have embraced plastic as a handle scale material for its weight saving and, let’s be honest, cost saving benefits. While I may not be wild about the material, I am pleased to say that the RAT 2 handle scales feel the least “plasticy” of the bunch.

Ontario Knife Company uses a very pleasing micro-checkered pattern that almost feels like a denim micarta in the hand, and does a fair job of creating enough texture to keep the handle grippy while not ruining your pants like rough G10 can.

On the design side, the handle is shaped almost like a canoe, with a rounded pommel area leading to a gentle swell in the middle, and finally dipping in to a generous finger choil before rounding off to mirror the bottom.

This knife feels so natural to hold in either of the standard forward grips, locking your index finger in place and putting your thumb directly on the fantastic gimping at the base of the blade’s spine. There’s no unnecessary flashy jimping or weird angles, just a beautifully rounded and perfectly comfortable handle that works, which is becoming a rarity.

Deployment & Lockup

The RAT 1 and RAT 2 have something that I’ve never seen on another folding knife, two sets of washers. One set of bronze washers sit against the blade, and another set of nylon washers is sandwiched between those and the stainless steel handle scales. I have no idea why they thought to do that, but oh boy does it work.

These knives are renowned for flicking out with super speed, and they deserve their reputation. They don’t require a drop of oil, a dab of grease, or an ounce of lubricant, yet you’d swear that someone dipped the knife in grease while you weren’t looking after you flick the blade out, it’s just that smooth.

The lockup is also a point of excellence for this knife, thanks to the full stainless steel liners. I’ve owned at least 3 of this model, and each one had the same 50% engagement on the liner lock, with zero up and down play and virtually no wiggle side to side. It’s impressive when you realize the knife is barely 7″ overall, and weighs under 3 ounces.

Features, Fit & Finish

Have you ever seen a knife you just loved the design of, but hated the color? Well, that isn’t a problem when it comes to the Ontario RAT 2. Ontario produces at least five different color variations that I’ve seen, and even offers the blade in a black or satin finish. Hate knives that don’t offer you the type of carry option you want? Bam! Four-way positionable pocket clip!

Did I mention they make both plain and combination blades? I love when a knife offers me the option to carry the thing how I want to carry it, without forcing me to compromise. You’re probably getting a better idea of why I bought so many of these things now!

As far as fit & finish goes, I can say you definitely get more than you pay for with the RAT 2. Every one I’ve used has had that same great action, they’ve all come with very useable (if not scary sharp) edges, and I have yet to see an issue with the lockup.

The most variance I’ve seen has been in the centering department. My first RAT 2 was dead center, but the two after that tended to drift to the non-locking side of the knife. They were never so far off center that the blade would rub the liner, but it was far enough that it irked me.

Let’s be clear here, these knives are made in Taiwan, not in the U.S. Really though, that seems to have less bearing on knife quality these days than it has in the past, and if you don’t believe me, pick up a Spyderco that is made in Taiwan. Sure, we should always buy American when possible but for those on a budget it’s tough.

Field Test

I’ll admit it, I’ve been soft in the field test department at times, especially when it comes to smaller knives that have not-so-small price tags. You’ll be happy to know, thanks to the very small price tag of the RAT 2, I did not go gently on the testing department.

After re-profiling the edge to about 20 degrees per side, I proceeded to do all the normal little daily tasks I expect of a smaller EDC; I cut a few veggies, made a sandwich, opened packages and mail, etc. When I had finished that, which the RAT 2 excelled at, I took a walk in my yard and started gathering dead branches, then proceeded to use a baton to split an assortment of the sticks ranging from 1 to about 3 inches thick.

Once again the RAT 2 came through. So I decided to see how much I could do before this thing would finally give up. Using the same baton, I started whacking through about a five inch thick live oak branch. Well, the knife didn’t necessarily fail (the lock never disengaged, although it did end up pressed against the opposite liner), it just dulled so bad by this point that it couldn’t defeat the branch. So, there it is, the knife has limits after all. Luckily for the average user, you won’t find yourself batoning oak branches too often!

Alternatives

As I said earlier, the RAT 2 is largely a scaled down version of the RAT 1 and you can see the size comparison below.

There is one knife I simply must discuss as an alternative to the RAT 2, because it was designed by the same man to be a direct competitor! The ESEE Zancudo, designed by Jeff Randal after splitting with Ontario, is a similarly sized and priced alternative. Both sport 3″ drop point blades with a full flat grind, both made of AUS-8 steel. The Zancudo is a frame lock, which many folks would say is probably stronger than a liner lock (I’m not one of them, as a properly made liner lock is just as strong), and instead of a satin finished blade ESEE gives it a nice stonewash.

When it comes to carry options, the RAT 2 is the clear victor, offering both lefties and righties both up and down configurations, whereas the Zancudo is only up or down for righties. I also much prefer the handle design of the RAT 2, both aesthetically and ergonomically, to the simpler bell curve of the Zancudo design. The Zancudo is just a bit slimmer than the RAT 2, but weighs a full half ounce more. The race between Randal’s first and second design may be a close one, but I’m calling it for the RAT 2!

Wrap Up

For a knife that packs as many cool features as this, into a package as small and lightweight as this, with a price tag as small as this one, is no easy feat. You’re getting a fantastically useful blade that’s a blast to flick out, a great ergonomic handle made with open pillar construction, and the ability to carry it however the heck you want. The Ontario RAT 2 sits firmly in my budget EDC hall of fame, alongside other great budget knives like the Spyderco Tenacious and Kershaw Skyline.

I wish more companies out there would try to do what Ontario has clearly done here, make a no nonsense knife that anyone can afford and enjoy, without resorting to gimmicks or flashy marketing, just letting the knife and the quality speak for themselves. So do yourselves a favor folks, go check out the myriad of options available between the Ontario RAT 1 and RAT 2, because you can’t find much higher value for your dollar.

The Good: Well designed, smooth action, decent ergos, superb value for money The Bad: Made in Taiwan, frequent (but easy) sharpening needed Bottom Line: Arguably the best $30 you can spend in the folding knife market today

Get the RAT 2 at Amazon

The post Ontario RAT 2 Review appeared first on Buy Best Knife.

from Buy Best Knife https://ift.tt/2qwsENf via IFTTT

#IFTTT #Buy Best Knife

0 notes

daniel1244martinez · 7 years ago

Link

Geographically, this report splits the United States market into seven regions: The West Southwest The Middle Atlantic New England The South The Midwest with sales (volume), revenue (value), market share and growth rate of Folding Knives in these regions, from 2012 to 2022 (forecast).

Request a Free Sample Report @ https://www.reportsmonitor.com/request-sample/?post=261828

United States Folding Knives market competition by top manufacturers/players, with Folding Knives sales volume, price, revenue (Million USD) and market share for each manufacturer/player; the top players including Buck FOX Knives Gerber Benchmade Gerber Gear FKMD Knives Camillus Knives Ka-Bar Leatherman Spyderco ESEE Knives Victorinox Browning

View Entire Report @ https://www.reportsmonitor.com/united-states-folding-knives-market-report-2017-2/

On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into By Blade Edge Plain Serrated By Blade Style Drop-point Tanto Sheepsfoot

Request a Free Sample Report @ https://www.reportsmonitor.com/request-sample/?post=261828

On the basis on the end users/applications, this report focuses on the status and outlook for major applications/end users, sales volume, market share and growth rate of Folding Knives for each application, including Outdoor Hunting Military Other

Some Points From Table of Contents:

United States Folding Knives Market Report 2017 1 Folding Knives Overview 1.1 Product Overview and Scope of Folding Knives 1.2 Classification of Folding Knives by Product Category 1.2.1 United States Folding Knives Market Size (Sales Volume) Comparison by Type (2012-2022) 1.2.2 United States Folding Knives Market Size (Sales Volume) Market Share by Type (Product Category) in 2016 1.2.3 Plain 1.2.4 Serrated 1.3 United States Folding Knives Market by Application/End Users 1.3.1 United States Folding Knives Market Size (Consumption) and Market Share Comparison by Application (2012-2022) 1.3.2 Outdoor 1.3.3 Hunting 1.3.4 Military 1.3.5 Other 1.4 United States Folding Knives Market by Region 1.4.1 United States Folding Knives Market Size (Value) Comparison by Region (2012-2022) 1.4.2 The West Folding Knives Status and Prospect (2012-2022) 1.4.3 Southwest Folding Knives Status and Prospect (2012-2022) 1.4.4 The Middle Atlantic Folding Knives Status and Prospect (2012-2022) 1.4.5 New England Folding Knives Status and Prospect (2012-2022) 1.4.6 The South Folding Knives Status and Prospect (2012-2022) 1.4.7 The Midwest Folding Knives Status and Prospect (2012-2022) 1.5 United States Market Size (Value and Volume) of Folding Knives (2012-2022) 1.5.1 United States Folding Knives Sales and Growth Rate (2012-2022) 1.5.2 United States Folding Knives Revenue and Growth Rate (2012-2022)

About Us

Reports Monitor (ReportsMonitor.com) is a platform for companies looking to meet their market research and business intelligence requirements. Our aim is to change the dynamics of the Market Research industry by providing quality intelligence backed by data. Your requirement for market forecasting is fulfilled by our exclusive quantitative and analytics driven intelligence. We have a vast collection of reports, covering maximum industries worldwide. Our process is meticulously planned and executed in order to use maximum resources and explore the market for getting genuine insights. The prime focus is to get reliable data, Decision makers can now rely on our distinct data gathering methods to get factual market forecasting and detailed analysis.

Contact Information:

Jay Matthews Direct: +1 513 549-5911 Email: [email protected] Website: http://www.reportsmonitor.com

#Folding Knives Market

0 notes