#sanden heat pump hot water

[tcksolar]

Sanden Heat Pump Hot Water

Replace your leaking, energy-guzzling water heater with the advanced Sanden Eco Plus heat pump hot water system. It’s environmentally friendly and can save you up to 80% on your energy bills.

It absorbs heat from the air to heat water saving energy, money and greenhouse gas emissions. It’s quiet and able to use off-peak power and is eligible for rebates and incentives.

Save up to 80% on your energy bills

A hot sanden heat pump hot water heat pump uses the natural energy in the air to save money and reduce greenhouse gas emissions. Using industry-leading technology similar to that used in refrigeration and air conditioning units, it absorbs energy from the atmosphere and transfers it into your hot water storage tank. The system is also eligible for the highest level of Small scale Technology Certificates (STC) compared to other hot water heat pumps in Australia.

The Smarter Eco Plus heat pump combines a high quality 300L Australian made extra long life Stainless Steel storage tank with an efficient Sanden heat pump unit. Its split system design allows easy installation by a Plumber & Electrician and does not require the use of backup elements.

Its energy efficiency is further enhanced by utilising off peak electricity tariffs to maximise your savings. It uses only 0.84kW of energy to generate 5kW of heating, saving you 80% on your electricity costs compared to conventional electric systems.

Whisper quiet operation

The Eco Plus system absorbs energy from the air and uses it to heat your water with a COP (coefficient of performance) of up to 4. This significantly reduces electricity consumption, saving you money year after year. It can be combined with an on-roof solar power system to maximise energy utilisation.

The system uses standard-grade technology similar to refrigeration and air conditioning systems, extracting energy from the ambient air and passing it on to your hot water tank. It also uses ozone friendly R744 refrigerant with low global warming potential.

These advanced systems are also extremely quiet. They have an industry leading noise level of 38 dB, which is almost silent! This makes them ideal for installations on boundaries and close to bedrooms. The Australian made Stainless Steel tanks are insulated to minimise heat loss, with a safety pressure and temperature relief valve supplied. They also come with one of the best warranties in Australia – 6 years full parts and labour on the Heat Pump unit and 15 years Pro Rata warranty on the tank.

Environmentally friendly

Sanden Eco Plus hot water heat pumps use industry-leading technology found in refrigeration and air conditioning to draw energy from the atmosphere. This energy is then transferred into heating your hot water without the need for backup elements. The system works like a refrigerator in reverse and uses the natural, ozone friendly refrigerant CO2 (R744) to absorb the heat from the surrounding environment.

The heat is then pumped into the storage tank using a very small amount of electricity. The result is a system that needs radically less power than conventional electric storage hot water systems.

Sanden also offers a wide range of energy efficient water heaters with different tank sizes to suit any home. The company’s premium systems are backed by some of the most reliable warranties in the industry. Here is a review from user "predrag" that pretty much sums it up:

Easy to maintain

Sanden has designed their sanden heat pump system to be simple and easy to maintain. It comes with one touch boost and multiple timer settings to control usage, as well as a wifi controller for remote access. It also enables you to maximise energy utilisation and reduce running costs even further.

These units are a highly efficient alternative to traditional hot water systems and will reduce your power consumption by up to 80%. They use standard-grade technology from refrigerators and air conditioning to extract heat from the atmosphere using an ozone friendly refrigerant. The energy is then used to warm the water in your tank.

They are also extremely durable and have been tested to operate in the Australian climate, with a large range of operating temperatures from negative 10 degrees to 43 degrees Celsius. Their stainless steel tanks are backed up with an extensive 10year warranty excluding labour.

[eckermannheatingandcooling]

Experience the efficiency and reliability of the Sanden Heat Pump Hot Water System. Say goodbye to high energy bills and hello to eco-friendly hot water solutions. Explore the benefits and options available for the Sanden Heat Pump Hot Water System today.

[melbourneheatpumps]

The Benefits of Commercial Heat Pumps for Your Business

In today’s world, energy efficiency is crucial for businesses. One way to achieve this is by investing in commercial heat pumps. These systems not only provide effective heating and cooling but also save money and reduce environmental impact. Let’s explore the advantages of commercial heat pumps, specifically focusing on popular options like the Hydrotherm heat pump and Aquatech heat pump.

What Are Commercial Heat Pumps?

Commercial heat pumps are systems that transfer heat from one place to another. They can heat or cool a space by moving heat between the interior and exterior of a building. Unlike traditional heating systems, they use electricity to move heat instead of generating it. This makes them more efficient and cost-effective.

Types of Commercial Heat Pumps

Hydrotherm Heat Pump

The Hydrotherm heat pump is designed for efficiency and reliability. It works well in various commercial settings, providing both heating and cooling solutions. With its advanced technology, it offers excellent energy savings over time.

2. Aquatech Heat Pump

The Aquatech heat pump is another popular choice. Known for its robust performance, this system is ideal for larger commercial spaces. It is particularly noted for its efficiency in hot water production.

3. Sanden Heat Pump Melbourne

Sanden heat pumps are recognized for their innovative design. They are specifically popular in Melbourne due to their efficiency in the local climate. These systems provide excellent heating solutions while minimizing energy consumption.

4. Aquatech Rapid X6

The Aquatech Rapid X6 is a cutting-edge model that focuses on rapid heating. It is perfect for businesses that require quick and efficient hot water solutions.

Benefits of Installing Commercial Heat Pumps

Energy Efficiency

One of the main advantages of using commercial pumps in Melbourne is energy efficiency. These systems consume less energy than traditional heating systems, which translates to lower utility bills. Businesses can save significant amounts over time.

Cost Savings

While the initial cost of heat pump installation may seem high, the long-term savings are worth it. Businesses can reduce their energy costs and lower maintenance expenses with these reliable systems. Many businesses report a quick return on investment after switching to a heat pump.

Environmentally Friendly

Commercial heat pumps are eco-friendly. They produce fewer carbon emissions than traditional systems. By choosing a Hydrotherm hot water system or an Aquatech heat pump, businesses contribute to a greener environment. This can also enhance a company’s reputation, as consumers increasingly prefer environmentally responsible businesses.

Versatility

Heat pumps are versatile. They can be used for various applications, including heating and cooling. This makes them suitable for different types of businesses, from offices to retail spaces. The flexibility of the Aquatech Rapid X6 is particularly beneficial for companies needing quick hot water solutions.

Low Maintenance

Commercial heat pumps require less maintenance than traditional systems. Regular checks and cleanings can keep them running smoothly. Most systems, including Sanden heat pumps, are built to last, making them a sound investment for the future.

Choosing the Right Heat Pump for Your Business

When selecting a heat pump, consider your specific needs. Think about the size of your space, your heating and cooling requirements, and your budget. Consulting with a professional can help you make the right choice.

Professional Installation

For optimal performance, heat pump installation should be handled by professionals. An experienced technician will ensure the system is installed correctly, maximizing efficiency. This is crucial for both Hydrotherm and Aquatech heat pumps, as proper installation impacts their effectiveness.

Conclusion

Investing in commercial heat pumps is a smart decision for any business. With options like the Hydrotherm heat pump and Aquatech heat pump, you can achieve energy efficiency, cost savings, and environmental benefits. The Sanden heat pump Melbourne is also a great choice for those in the area. By prioritizing proper installation and maintenance, your business can enjoy the many advantages these systems offer for years to come.

[schooloftango04]

Understanding Heat Pumps: A Comprehensive Guide

Heat pumps are becoming increasingly popular in Melbourne for their energy efficiency and versatility. Whether you’re considering a Hydrotherm heat pump or exploring options like the Aquatech heat pump, this guide will help you understand what a heat pump is and why it might be the right choice for your heating and cooling needs.

What is a Heat Pump?

A heat pump is a device that transfers heat from one place to another, making it an energy-efficient solution for heating and cooling your home or business. Unlike traditional heating systems that generate heat, heat pumps move existing heat from the outside air into your home during the winter and reverse the process during the summer.

Types of Heat Pumps

There are several types of heat pumps available in Melbourne, each with unique features and benefits. Here’s a look at some popular options:

Hydrotherm Heat Pump The Hydrotherm heat pump is a highly efficient system known for its reliability and performance. It is a great option for those looking to reduce energy consumption while maintaining a comfortable indoor environment.

Aquatech Heat Pump The Aquatech heat pump is another excellent choice, particularly for those interested in rapid heating and cooling. The Aquatech Rapid X6 is especially favored for its quick response time and energy efficiency.

Sanden Heat Pump The Sanden heat pump Melbourne residents love is renowned for its environmentally friendly operation. It uses CO2 as a refrigerant, making it a green choice for eco-conscious homeowners.

Benefits of Heat Pumps

Heat pumps offer numerous advantages, making them an attractive option for both residential and commercial applications.

Energy Efficiency: Heat pumps can be up to 300% more efficient than traditional heating systems, saving you money on energy bills.

Year-Round Comfort: With the ability to both heat and cool, heat pumps provide comfort in all seasons.

Low Environmental Impact: Many heat pumps, like the Sanden heat pump Melbourne residents prefer, have low greenhouse gas emissions, helping to reduce your carbon footprint.

Commercial Applications of Heat Pumps

In Melbourne, commercial pumps are becoming increasingly popular for businesses looking to improve energy efficiency and reduce operating costs. Whether you’re managing an office building or a manufacturing facility, heat pumps can provide reliable and cost-effective heating and cooling solutions.

Hydrotherm Hot Water Systems

The Hydrotherm hot water system is another innovative product that uses heat pump technology. It offers an efficient way to heat water, providing hot water on demand without the high energy costs associated with traditional water heaters.

Why Choose a Heat Pump?

If you’re still on the fence about whether a heat pump is right for you, consider the following reasons:

Cost Savings: Over time, the energy savings from a heat pump can offset the initial investment.

Versatility: Heat pumps can be used in a variety of settings, from homes to businesses, providing a flexible solution for heating and cooling.

Environmental Benefits: With lower emissions and energy use, heat pumps are a more sustainable option.

Choosing the Right Heat Pump

When selecting a heat pump, it’s essential to consider your specific needs. Whether you’re interested in the quick heating capabilities of the Aquatech Rapid X6 or the environmentally friendly operation of the Sanden heat pump Melbourne trusts, there is a heat pump that will meet your requirements.

Conclusion

Heat pumps are an excellent investment for anyone looking to improve energy efficiency and reduce their environmental impact. With options like the Hydrotherm heat pump, Aquatech heat pump, and Sanden heat pump Melbourne residents rely on, there’s a solution for every need. Whether you’re a homeowner or a business owner, heat pumps provide a reliable and cost-effective way to maintain a comfortable indoor environment year-round.

[highlandplumbing15]

Plumbing Industry Trends to Watch in 2024

In the fast-evolving world of plumbing, staying ahead of the curve is crucial.

As we step into 2024, several trends are poised to shape the industry landscape.

From innovative technologies to sustainability initiatives, here are the top plumbing trends to keep an eye on this year.

Embracing Eco-Friendly Solutions

With environmental concerns taking center stage, eco-friendly plumbing solutions are gaining traction.

One notable trend is the increasing adoption of hydrotherm hot water systems.

These systems utilize renewable energy sources, such as solar power, to heat water efficiently while minimizing carbon emissions.

As sustainability becomes a priority for both consumers and businesses, expect to see a rise in eco-conscious plumbing practices.

Integration of Smart Technology

The era of smart homes is upon us, and the plumbing industry is no exception.

Aquatech Rapid X6, a cutting-edge smart water monitoring system, is set to revolutionize how we manage water usage.

By providing real-time insights and automatic leak detection, these intelligent systems empower homeowners to conserve water and prevent costly damage.

As smart technology continues to advance, expect to see greater integration of these solutions into residential and commercial plumbing systems.

Shift Towards Heat Pump Technology

Traditional water heating methods are giving way to more energy-efficient alternatives, such as the Sanden heat pump in Melbourne.

Unlike conventional water heaters that rely on electricity or gas, heat pumps extract heat from the surrounding air to warm water, making them highly efficient and environmentally friendly.

With incentives for renewable energy adoption on the rise, expect to see increased demand for heat pump technology in the plumbing sector.

Focus on Water Conservation

In an era of increasing water scarcity, conservation efforts are paramount. Plumbers are playing a crucial role in promoting water-saving practices through the installation of low-flow fixtures and efficient irrigation systems.

Additionally, advancements in greywater recycling technology are making it easier to reuse water for non-potable purposes, further reducing strain on freshwater supplies.

As communities grapple with water conservation challenges, expect plumbers to be at the forefront of implementing sustainable solutions.

Emphasis on Health and Safety

The COVID-19 pandemic has underscored the importance of maintaining clean and hygienic plumbing systems.

From touchless faucets to antimicrobial pipe coatings, there’s a growing emphasis on technologies that enhance health and safety in plumbing.

As public health remains a top priority, expect to see continued innovation in plumbing products and practices aimed at minimizing the spread of illness and ensuring safe water supply.

Conclusion:

Looking Ahead

As we navigate the complexities of the modern world, the plumbing industry is evolving to meet the changing needs of society.

From eco-friendly solutions to smart technology integration, the trends shaping the plumbing landscape in 2024 reflect a commitment to sustainability, efficiency, and innovation.

By staying informed and embracing these trends, plumbers can position themselves for success in a dynamic and ever-changing industry landscape.

[energypowersaver]

Energy Efficient Hot Water Systems

Water heating accounts for a quarter of the typical Australian household’s energy use and can be an expensive annual expense. By reducing your hot water use and switching to an energy efficient system you can save money and help the environment.

In NSW, there are several financial incentives to install a heat pump or solar hot water system. These include the Energy Saving Scheme (ESS) and rebates from state governments. To know more about Energy Efficient Hot Water System, visit the Energy Power Saver website or call 69650912468.

ESS is a NSW government scheme established in 2009 which provides financial incentives to install energy efficient equipment and appliances in households and businesses. This incentive can save you hundreds of dollars on your power bill and is a great way to lower your environmental impact.

Electric storage hot water systems - the most common in Australia - store heated water in an insulated tank, ready to be used throughout the day. These systems are the most energy intensive to run, but they're also the most inexpensive to buy.

Heat pump hot water systems and gas instantaneous systems are more energy efficient and can be up to 80% cheaper to run than an electric system. They're also kinder to the environment.

These systems are covered by the ESS and you can get up to $500 off their installation. The discount is calculated by the number of Energy Saving Certificates (ESCs) you can receive, depending on your location and what type of system you're replacing.

The NSW heat pump hot water rebate is a fantastic incentive for upgrading to a renewable energy efficient hot water system. It can help cover the cost of installing a new electric or gas hot water system and can be claimed through the Energy Savings Scheme.

In addition, a Sanden Eco(r) Plus hot water heat pump system also attracts the highest amount of Small-scale Technology Certificates (STCs). These are environmental type of currency that can be traded on the certificate market and used to reduce the purchase price of your new system.

These STCs can then be exchanged for cash rebates from the federal government. For example, a 280 litre heat pump system could be worth between $800 and $1,040 in STCs depending on where you live in Australia.

Although the federal government is the driving force behind promoting energy efficiency, state and local governments can play a big role in ensuring that their citizens are well served.

For example, the state of New York requires that all energy efficient water heaters (HEWs) be rated in accordance with the latest DOE 10 C.F.R Part 430 Uniform Energy Factor standard. The state also mandates that each HEW be accompanied by a label displaying the UEF score and a QR code for more information about the new rating system.

The state's aforementioned mandatory requirement has a lot of potential for promoting energy efficiency and encouraging HEWs in the long run, but it has also brought on a lot of headaches for manufacturers and their distributors and installers. As a result, some products have been left on the cutting room floor. The industry's best bets are to wait and see what the new administration has in store for the HEW space.

Founded in 1915, Energy Power Saver is a family-owned Australian brand committed to developing and researching products for the domestic market. Their state-of-the-art facility in the Southern Highlands of NSW manufactures their range of hot water heaters and systems.

Dux offers a variety of options to suit all households. From their electric storage system, through to their gas boosted and heat pump systems, they have a solution to every home’s needs.

Their continuous flow models are popular amongst energy-efficient households, with none of their systems falling below a 6 star rating. Similarly, their gas storage systems aren’t a bad option for households looking to reduce their energy bills as they offer a minimum 7-year warranty and don’t dip below 4 star ratings. To know more about Energy Efficient Hot Water System, visit the Energy Power Saver website or call 69650912468.

If you’re not sure which type of hot water system to choose, give Metropolitan Plumbing a call and we can advise you on the best option for your household. And don’t forget, if you’re in the market for a heat pump hot water system, you can get a heavily subsidised one through the NSW Energy Savings Scheme.

[manufacturingtread-2021]

CO2 Heat Pump Hot Water Supply Systems Breakdown Data by Type

·         Residential

·         Industrial

·         Commercial

CO2 Heat Pump Hot Water Supply Systems Breakdown Data by Application

·         Air Source

·         Water Source

·         Other

[nguyenphudung93dn]

The best replacement for an old hot water system is a new super efficient and super quiet Sanden Eco Heat Pump hot water system. Save on your bills and emissions.

[t3sol-blog2]

Whether you have a small, medium, or large hot water requirement, T3Sol can provide a heat pump system to meet your needs and budget. Sanden heat pumps receive the highest small scale technology certificates to reduce the upfront cost and you can also receive an extra $700 rebate if replacing an old electric hot water system under the Victorian Energy Efficiency Certificate program.

[researchkraft19]

CO2 Heat Pump Hot Water Supply Systems Market : Growth, Demand and Key Players to 2027

Research Kraft has provided an exclusive analysis of global CO2 Heat Pump Hot Water Supply Systems Market Size, Status and Forecast to 2027 gives a detailed analysis of the market with key company profiles. The report gives a thorough evaluation of the market structure which fuses evident perceptions about the market for a predicted timeframe from 2020 to 2027. The report actively includes informative aspects relating to product developments, launches, and trends, to assist market players, shareholders, and investors in strategic decision making.

Avail a Sample to know more about the complete Report @ https://www.researchkraft.com/request-sample/1096420

The analysis of the market are explained below:

Leading key players in the market are:  DENSO, Sanden, Mitsubishi, Nihon Itomic, Daikin, AAON, DunAn Group, Sujing Group, enEX Global CO2 Heat Pump Hot Water Supply Systems Market Segment by Applications considering Consumption Growth Rate and Market Share:

Residential

Industrial

Commercial

worldwide CO2 Heat Pump Hot Water Supply Systems Market Segment by Product Types considering Production, Revenue (Value), Price Trends:

Air Source

Water Source

Others

Region Analysis

The report analysis of the markets across five major regions: North America, Europe, Asia-Pacific (APAC), Middle East and Africa (MEA), and South & Central America. The exhaustive PEST analysis is done for each region to assess major external factors which may influence CO2 Heat Pump Hot Water Supply Systems Market in the coming years.

Ask for discount:@ https://www.researchkraft.com/check-discount/1096420

Highlights of the report:

Fathom the present and unavoidable predetermination of the CO2 Heat Pump Hot Water Supply Systems Market in both made and making markets.

Extra and cut time doing zone level examination by watching the new development, size, driving players and parts inside the general Market.

The report edifies the bit expected to overwhelm the CO2 Heat Pump Hot Water Supply Systems industry and market.

To look at and consider the market status and hypothesis among as a rule enormous zones.

To examine the general key regions advance potential and bolstered position, opportunity and challenge, controls and dangers.

Emerging niche segments and regional markets.

Research Kraft also offers customization on reports based on specific client requirement.

Ask For Customization @ https://www.researchkraft.com/send-an- enquiry/1096420

Contact Us

Research Kraft

Phone: 888-213-4282

Email: sales@researchkraft.com

[emoryjrice71]

A split-system heat-pump water heater

We’ve chosen an air-source heat pump for hot water. The Sanden water heater is a unique product. The compressor is mounted outside with the minisplit compressors and it shares many […]

The post A split-system heat-pump water heater appeared first on Fine Homebuilding.

[itsworn]

Climate Change: Installing A Vintage Air Gen IV System

Looking inside most of the customized classic trucks found at events across the country would lead the casual onlooker to believe they all came equipped with factory air conditioning. But while Packard became the first car to introduce factory air conditioning in 1939, most pickups weren’t so blessed until the ’60s. Fortunately our friends at Vintage Air began developing aftermarket systems in 1976 that made it easy to retrofit any car or truck with a contemporary climate-control system.

While adding A/C to an early truck isn’t anything new, something that is becoming more common is replacing an original factory system with something more efficient, and our 1973 Ford is a perfect example. While the heat and cool system in our truck was fine when new, time and lack of technology have caused it to be trouble prone. The first problem became apparent when the vacuum-activated dash control developed a mind of its own. Due to what seemed to be miles of rubber hose, all of which had deteriorated, and a dicey vacuum motor, the system would change from defrost to floor outlets then maybe to the dash registers. But the most annoying behavior was when the flapper door would open sporadically, allowing cold air into the cab when heat was desperately needed.

If the control issues weren’t bad enough, the heater core began seeping, which soaked our new carpet—meaning the entire underhood unit had to be removed for repair. Of course that meant the A/C would have to be disconnected and that meant we’d have to convert to 134A refrigerant from the original ozone depleting R-12. With all things considered, it was time to update to a new Gen IV Vintage Air heat and cool system. In operation, the heater portion of any heat and cool system passes hot water through a mini radiator and a fan blows air through the core to provide warmth for the passengers. While that’s simple enough, cooling the air is a little more complicated, but essentially air conditioners make the air cold by removing heat.

The major components of an automotive air conditioning system are the compressor, evaporator (inside unit), condenser (outside heat exchanger), hoses, fittings, drier, safety switch, and, of course, refrigerant. In operation, liquid droplets of refrigerant flowing through the evaporator absorbs heat and turns to a vapor, the compressor draws the low pressure vapor from the evaporator and pumps it through the condenser where the heat that has been absorbed dissipates in the ambient air and as the refrigerant cools it becomes a high-pressure liquid. From the condenser the refrigerant goes to the receiver/drier where the vapor and moisture are removed, it then passes through the expansion valve, which atomizes the refrigerant and turns it into a stream of cool, low-pressure droplets—and the cycle begins again.

Gen IV Technology

Vintage Air’s Gen IV units include a long list of features that were previously found only on modern OEM systems, such as fully electronic servo operation that eliminates vacuum motors or control cables for operation, increasing reliability and ease of installation. By using electronically controlled servo motors the air doors can travel further, which allowed Vintage Air to design evaporator cases with increased air volume in both the heat and cool modes. Thanks to these to solid-state controls warm and cool air can be blended for precise temperature control and the optimum dehumidified defrost mode. And for those with engines that have lumpy cams and low-manifold vacuum at idle, electronic servos will eliminate the tendency of vacuum controlled units to behave erratically with a mind of their own. Typically these engines have low-manifold vacuum at idle, which can make vacuum-operated accessories like A/C systems seem to have a mind of their own—servo motors eliminate any such erratic operation.

When installing any A/C system something that should be included is a safety switch. There are two types, the binary pressure safety switch (Vintage Air PN11078-vus), which disengages the compressor clutch in case of extreme low system pressure resulting from a loss of refrigerant (extremely important since an A/C system relies on refrigerant to carry lubrication through the system) or excessively high head pressure (406 psi) to prevent compressor damage or hose rupture. The second type of safety switch is the trinary (PN 11076-vus) that combines high/low pressure protection with an electric fan operation signal at 254 psi.

With the Vintage Air Gen IV system securely mounted under the dash we were able to connect to the original dash outlets and mount the new control panel where the original had been. An unexpected benefit of the new system was the elimination of the huge factory box of climate-control parts under the hood. It makes spark plug and rocker cover access much easier, and for show trucks (which this is not) the firewall can be cleaned up considerably.

Our Vintage Air Gen IV system works perfectly, hot or cold temperature in the cab is easy to control, and the defrosters work great. And best of all the system does not have a mind of its own.

Vintage Air has universal heat and cool systems for virtually any application, as well as their Sure Fit line for specific vehicles, such as this one for 1961-1966 Fords.

For our 1973 Ford we used universal components. We fabricated a filler plate to mount the new Vintage Air control panel and cover the hole for the system’s original vacuum controls.

This is the big, bulky original housing for the heater core, A/C evaporator, and the blower motor. The entire assembly was removed.

We wondered why the original A/C was working poorly. It was plugged with a combination of sealing foam from the inside flapper door and hair from our constant companion, Babe the Wonder Dog.

This is the new Vintage Air Gen IV heat and cool unit. Owing to its more efficient components it’s more compact yet more efficient than the OEM system.

Thanks to these electronic servomotors the doors inside the evaporator housing can travel further for increased airflow and warm and cold air can be mixed for precise temperature control.

Shown here are the new Vintage Air defroster ducts and the massive factory version. Getting rid of it and all the vacuum hose the original system required cleaned up the area behind the dash

This is the original air intake from the plenum in front of the windshield that connected to the heating system. We made a cover plate to close it off.

To retain the original dash outlets we had to modify the hose connections by making adapters with oval holes from flat plastic.

The original ducts for the dash outlets had rectangular ends. We used epoxy to attach oval connectors from Vintage Air to flat plastic and then epoxied the “adapters” to the original registers.

With the new control panel installed and the original dash vents in place the conversion isn’t noticeable until you turn the system on and the improvement is obvious.

A cover plate was made to fill the huge hole left by the original heater-A/C box. It has a small hole to allow access to the new heater and A/C hoses.

Vintage Air supplied a small panel and rubber grommets to route the heater and A/C hoses through.

This is the electronic heater control valve. It is directional and must be oriented correctly in the hose leading to the heater core.

The new Vintage Air condenser has two different fittings—when installing it the #6 line should be located on the bottom and the #8 at the top.

This is the receiver/drier. We mounted it behind the grille on the core support. It should always be changed whenever the A/C hoses are disconnected and the system is drained of refrigerant.

We had previously installed a new Sanden A/C compressor with the serpentine belt system, but it had never been run. Note the new hoses: a #6 is the high-pressure hose from the condenser/drier to the evaporator; a #10 hole comes from the evaporator to the suction side of the compressor; a #8 hose connects the discharge side to the compressor to the condenser.

When crimping hoses a hole in the ferrule of beadlock fittings ensure the hose is seated properly.

Beadlock fittings have a ferrule that is attached to the tubing; crimping the ferrule locks the hose in place.

This is a hydraulic crimping tool from Vintage Air. It comes with a complete selection of dies and will make safe, secure crimps.

This is how a properly crimped beadlock fitting appears. The metal barrel on the fitting should be crimped evenly all the way around.

To prevent damage and ultimately refrigerant leaks when installing fittings, the O-rings must be lubricated with the proper compressor oil.

Part of every A/C system should be a safety switch—this is the binary type. It will have two connections and is placed in the wire leading to the compressor clutch.

This is a trinary safety switch. It performs the same function as the binary switch and will also activate an engine cooling fan. Even with a mechanical fan it’s wise to use a trinary switch in case an electric fan is added later—it eliminates the need to drain and recharge the system to change the switch.

The post Climate Change: Installing A Vintage Air Gen IV System appeared first on Hot Rod Network.

from Hot Rod Network http://www.hotrod.com/articles/climate-change-installing-vintage-air-gen-iv-system/ via IFTTT

[dallasmbrownb]

Sanden to introduce Gen3 SANCO₂ heat pump water heater at AHR Expo

Sanden is showcasing the Gen 3 SANCO₂ Heat Pump Hot Water Heater at the upcoming AHR Expo, held in Chicago, IL January 22-24th.

from RSSMix.com Mix ID 8247361 https://www.pmmag.com/articles/101156-sanden-to-introduce-gen3-sanco-heat-pump-water-heater-at-ahr-expo via http://www.rssmix.com/

[her-colorful-sadness-blog]

Sanden to introduce Gen3 SANCO₂ heat pump water heater at AHR Expo

Sanden is showcasing the Gen 3 SANCO₂ Heat Pump Hot Water Heater at the upcoming AHR Expo, held in Chicago, IL January 22-24th.

[dustjacketdispatch-blog1]

Sanden to introduce Gen3 SANCO₂ heat pump water heater at AHR Expo

Sanden is showcasing the Gen 3 SANCO₂ Heat Pump Hot Water Heater at the upcoming AHR Expo, held in Chicago, IL January 22-24th.

[rekvisiitta-blog]

Sanden to introduce Gen3 SANCO₂ heat pump water heater at AHR Expo

Sanden is showcasing the Gen 3 SANCO₂ Heat Pump Hot Water Heater at the upcoming AHR Expo, held in Chicago, IL January 22-24th.