#rpmb update

[netnahas]

Nexus 5x tools for screen replacement

#Nexus 5x tools for screen replacement update

#Nexus 5x tools for screen replacement driver

#Nexus 5x tools for screen replacement android

#Nexus 5x tools for screen replacement update

Further fixes has been added later (in SDHC1, PSCI and cleanup in 5.9, overlay msm8994 as hardware is very similar and update regulator config in 5.12, overlay and PSCI broke booting, which got fixed in 5.14. In kernel 4.18 was added support for SDHCI1 and pstore-ramoops. The Linux mainline kernel has very basic support for this phone since November 2016 (one cpu and uart). Here is the official Google page to download GPS, Audio, Camera, Gestures, Graphics, DRM, Video, Sensors firware blob. Driver exists in mainline.įPC1020, supported by this driver.

#Nexus 5x tools for screen replacement driver

Mainline driver since 4.17, properly enabled since 5.9 – c83e0951bcad ("arm64: dts: qcom: msm8992: Fix SDHCI1") Out-of-tree driver generated using linux-mdss-dsi-panel-driver-generator. Uses Qualcomm's PM8994 controller, works since 4.11 The current mainline Linux only supports Nexus 5X rev 1.01, but upcoming 5.18 will contain also rev 1.0 – cd4bd4704ec8 ("arm64: dts: qcom: msm8992-lg-bullhead: Add support for LG Bullhead rev 1.0"). Reboot again if you don't see anything in the screen after postmarketOS logo Now select start from the menu in the bootloader screen. $ pmbootstrap flasher flash_rootfs -partition userdata Go to bootloader then connect the device to the PC then run this commands one by one. Launch recovery: first boot to the bootloader, press the Volume Down button twice and press the Power button to select It will re-lock every reboot.īoot to bootloader: hold Volume Vown + Power button until the screen turns on. If this is missing then oem-unlocking won't work on the device. If your device says "SECURE BOOT: ENABLED (NO RPMB)" in the fastboot screen that means that the mainboard in your Nexus 5X is missing an image required by secureboot to function properly. Now select Yes on the phone screen with the volume button and use the power button to accept. Reboot to the bootloader and run " fastboot oem unlock" Then go to Settings→ System→ Developer Options and enable OEM unlocking

#Nexus 5x tools for screen replacement android

In android go to Settings→ System→ About Phone and tap the build number 7 times. UnDevDeCatOS ( Notes: Main device, LineageOS 15.1).Nobodywasishere ( Notes: I have 7 of these with half having bootlooping issues).Kcroot ( Notes: I have 4 pieces, started build).IonAgorria ( Notes: LineageOS - Boots but affected with big.LITTLE core cluster issue).Chappo ( Notes: MaruOS Installed, Daily Driver, Would prefer postmarketOS).

[rpmasterlistbot]

RP Masterlist Bot REVIVAL

The bot went down for a while due to migrating computers and never getting around to putting it back up.  As of this post going up, the bot should be running as regularly scheduled.

For those of you that don’t remember or those of you that are new, the bot runs on a very simple premise; it takes the people that follow it or are asked to be added VIA askbox, and adds them to an automatically managed masterlist that’s sorted by activity.

The steps to be added are very simple:

1.  Follow the bot 2.  Wait until you are added (Usually less than 24 hours) 3.  Unfollow the bot if you wish

If you have sideblogs you want to add or don’t want to follow, you can also send an ask in the format of either:

!add  [adds the blog sending the ask]

!add url [adds the blog associated with the url]

The bot has other features, and you can find those in the USAGE page.  There are also other lists, that need to be linked soon.

It’ll take a while before I remember what I was doing and where to go from here, but I know we still need more lists, and more support, and to convert from relying on URLs to relying on UUIDs.  (For those of you unaware, the current system means that changing your URL kicks you from the list.) 

Regardless, even if you don’t wish to be added to the list, even reblogging this to help get the word out about the ongoing project is greatly appreciated!

[gsmpayerteam]

GSM Player

Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone auth ON As ordinary unique solutions by World famous Infinity Team ! Core Changed : Protocol updated ( Raphael/Legacy ) New Feature: Standalone SLA/Auth [Raphael] Changed : Internal EMI engine updated : RAPAHEL : UFS support rebuild Flasher Changed: Core updated for RAPHAEL line Changed: UltraFlash feature updated, new security workarounds supported Service Changed: Identify !* Read new Android 10 specific fields, vendor-specific fields Changed: Smart Reset !* Optimized support for different customized and generic cases Changed: HW Report ( RAPHAEL - only ) !* UFS line devices now supported with following features: - CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons - LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels - RPMB info ( is it key programmed or clean and can be re-used ) - Partitioning details and other - HWreport log saving enabled ( for further analyze ) !* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init ) !* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug !* HWreport result may vary in diffirent models and agents even on the same SoC ! Firmware Reader Changed : Some modern brand-specific changes ( Xiaomi, Oppo, Vivo, Realme ) Changed : New types supported Other BugFix : Many different minor changes and fixes Changed : Generic protocol rebuild Info ! - Standalone SLA/Auth allow you ignore device security setting and allow boot it without having any DA/Auth/Remote auth support - You can boot ( with supported SoC ) device with any generic da and perform any need operations - Support MT6765 - All security versions, no auth need, no special da need, no remote service need Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing - Support MT6785 - All security versions, no auth need, no special da need, no remote service need Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing NOTE: special boot-helper tool should be installed - included in CM2MT2 package

[icunlock1]

UP818P Universal Programmer Mobile Car Repair POSS Machine crack Chip Programming

UP818P Mobile Car Repair POSS Machine crack Chip Programming Universal Programmer support for reading and copying of any Extended CSD Support for reading and writing of USER, BOOT, RPMB and GPP areas Support custom read and write USER area size, significantly improve work efficiency It supports setting the capacity of BOOT area, RPMB area, and GPP area Support for enabling OTP settings such as WrRel (reliable write) and SLC mode Detailed chip information showing the master can analysis The software is streamlined, no need to select, select the corresponding package Open image files directly for reading and writing, saving a lot of file processing time and programming time

Powerful data security: The use of reliable engineering encryption technology, and innovative use of one-time engineering password mechanism to ensure the safety of the project file in the process of transmission and use, while controlling output, and effectively protect engineering data security.

Highly compatible, durable BGA adapter: The matching patented product BGA adapter has an average service life of more than 20,000 times, and its usability and life expectancy far exceed that of imported adapters.

Hardware specifications: Communication interface: USB2.0 (compatible with USB1.0/1.1) System requirements: Windows XP/2003/NT/WIN7 and other operating systems, more than 256MB of memory, more than 1GB of hard disk space; Power specification: Input AC 100-240V, 50/60HZ; Output DC 6.5V/2A;

Standard configuration: One host, one power supply, one USB2.0 cable, one warranty card; Optional: Adapter.

Device update: Increasing support for new devices from time to time and updating the software on the website; Users can request support for special tools.

Quality assurance: From the date of purchase, within one year with the invoice warranty, if there is no valid invoice, the production date is marked by the host within one year; Adapters and sockets are consumables and are not warranted;

Technical Support: If you have any questions about the software during use, you can view the help file; you can also check the user manual for instructions. During working hours, you will receive detailed answers from professional technical engineers.

[alimorattab]

فول دامپ تست شده هارد سامسونگ Galaxy A01 Core - A013G باینری U4

فول دامپ تست شده هارد سامسونگ Galaxy A01 Core - A013G باینری U4

  Samsung A013G emmc dump & boot repair   در این مطلب برای شما دامپ A013G آماده کرده ایم که پس از رایت به راحتی گوشی بالا آماده و قادر به فلش کردن می باشد .   ___________________________________________ هارد مورد استفاده و تست شده گوشی A013G eMMC : KMFE60012M-B214/16GB _________________________________ فایل های موجود در این دامپ A013G  : EMMC_FE62MB_ROM1_000000000000_000100000000.bin = 4GB EMMC_FE62MB_ROM1_000000000000_000100000000.bin = 4MB EMMC_FE62MB_ROM1_000000000000_000100000000.bin = 4MB FE62MB_5910CA2A_20220514_124342.extcsd        

emmc-dump       EMMC CID: 150100464536324D42005910CA2AA735 EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D EMMC NAME: FE62MB , Vendor: SAMSUNG , S/N: 5910CA2A , rev. 00 EMMC NAME (HEX): 464536324D42 EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Extended CSD rev: 1.8 (MMC 5.1) Boot from: ROM2 (Boot partition 1) , width: 1 bit Boot Partition / Bus Config : 0x48 / 0x00 H/W Reset Function : 0x01 , RST_n signal is permanently enabled Partition setting : 0x00   ______________________________________________________________     COM1 ACPIVEN_PNP&DEV_0501 Communications Port (COM1) COM2 ACPIVEN_PNP&DEV_0501 Communications Port (COM2) COM6 USBVID_1781&PID_AAAC&REV_0100&MI_00 USB Serial Device (COM6) Selected pinout: GEN2 High Speed Pinout Change EasyJTAG Pinout OK Z3X EasyJtag Software ver. 3.7.0.24 Loading eMMC GEN2 Firmware... IO: 1800 mV Initial pull results: clock: 994mV pin connected ok command: 998mV pin connected ok data0: 999mV pin connected ok data1: 996mV pin connected ok data2: 1000mV pin connected ok data3: 997mV pin connected ok data4: 1002mV pin connected ok data5: 997mV pin connected ok data6: 998mV pin connected ok data7: 999mV pin connected ok Box S/N: 706C3AA83B32D36F, ,FW Ver.: 02.53 Box IO Level:1800 mV CLK Rate:42000 kHz Bus Width:8bit,SDR HiPower mode is off! ---------- eMMC Device Information ---------- eMMC CID : 150100464536324D42005910CA2AA735 eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D eMMC Manufacturer ID: 0015 , OEM ID: 0100 eMMC Date: 10/2020 Rev.0x0 eMMC NAME: FE62MB , S/N: 1494272554 eMMC NAME (HEX): 464536324D42 IC Name: Samsung , KMFE60012M-B214/16GB @BGA221 , Firmware is Updatable EMMC ROM1 (Main User Data) Capacity: 15028 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB EMMC RPMB is programmed and written 3027 times EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration Boot from:ROM2 (Boot Partition 1) Boot bus config : 0x00 , width 1bit , Partition config : 0x48. H/W reset function : 0x01 High-capacity WP group size Partitioning Support : 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting : 0x00 --------------------------------------------- Backup saved: FE62MB_1494272554_20220514_1309.extcsd Warning! One or more CRCs don't match. You should repair the disk! Caution: Found protective or hybrid MBR and corrupt GPT. Real (Hardware) Disk/Image size: 1D5A000 sectors 14.7 GiB Soft (Partitioned) Disk/Image size: 1D59FBC sectors 14.7 GiB Disk identifier (GUID): 52444E41-494F-2044-4D4D-43204449534B Logical sector size: 0x200 bytes ,First/Last usable sector: 34,30777310 Partition info successfully found ------ Detected 47 partitions ------ P0 (BOOT_PARA) Size: 26.0MB P1 (PARA) Size: 512.0KB P2 (EFS) Size: 8.0MB P3 (SEC_EFS) Size: 8.0MB P4 (BOTA) Size: 28.500MB P5 (PARAM) Size: 4.0MB P6 (UP_PARAM) Size: 4.0MB P7 (EXPDB) Size: 20.0MB P8 (FRP) Size: 1.0MB P9 (NVCFG) Size: 32.0MB P10 (NVDATA) Size: 64.0MB P11 (METADATA) Size: 32.0MB P12 (PROTECT1) Size: 8.0MB P13 (PROTECT2) Size: 8.0MB P14 (SECCFG) Size: 8.0MB P15 (PERSIST) Size: 48.0MB P16 (PERSISTENT) Size: 512.0KB P17 (MISC) Size: 7.500MB P18 (VBMETA_SYSTEM) Size: 8.0MB P19 (VBMETA_VENDOR) Size: 8.0MB P20 (RECOVERY) Size: 32.0MB P21 (MD_UDC) Size: 24.0MB P22 (SEC1) Size: 2.0MB P23 (PROINFO) Size: 3.0MB P24 (EFUSE) Size: 512.0KB P25 (MD1IMG) Size: 128.0MB P26 (SPMFW) Size: 1.0MB P27 (DUMMY) Size: 1.0MB P28 (MCUPMFW) Size: 1.0MB P29 (NVRAM) Size: 64.0MB P30 (GZ1) Size: 16.0MB P31 (GZ2) Size: 16.0MB P32 (LK) Size: 2.0MB P33 (LOADER_EXT1) Size: 64.0KB P34 (LOADER_EXT2) Size: 64.0KB P35 (STEADY) Size: 4.0MB P36 (BOOT) Size: 32.0MB P37 (DTBO) Size: 8.0MB P38 (TEE1) Size: 6.0MB P39 (RESERVED) Size: 3.500MB P40 (SUPER) Size: 2.203GB sp (SUPER_metadata) Size: 13.0KB sp (system) Size: 1008.406MB sp (vendor) Size: 173.871MB sp (product) Size: 605.687MB sp (odm) Size: 4.148MB P41 (VBMETA) Size: 8.0MB P42 (PRISM) Size: 50.0MB P43 (OPTICS) Size: 20.0MB P44 (CACHE) Size: 125.0MB P45 (OMR) Size: 24.0MB P46 (USERDATA) Size: 11.589GB ------------------------------------ ------ Android information ------ Detected LINUX(Android) system : 0x002A120000 (1008.406MB) Short EXT fs info: Size: 992.414MB Block size: 4.0KB Inode size: 256 Inodes: 3584 Short Android info: Device Brand: samsung Device Manufacturer: samsung Device Model: SM-A013G Device Name A: a01corextc Device Name B: a01core Build ID: QP1A.190711.020 Display Build ID: QP1A.190711.020.A013GXXU4AVC7 Release Incremental ID: A013GXXU4AVC7 Release Base ID: 10 Security Path: 2022-01-01 Architecture ABI: armeabi-v7a Product ID: a01core Build Description: a01corextc-user 10 QP1A.190711.020 A013GXXU4AVC7 release-keys PDA ver.: A013GXXU4AVC7 Backup saved: BuildProp_20220514_1309.txt --------------------------------------------- Detected USERDATA USERDATA : 0x00C5320000 (11.589GB) Unable to mount USERDATA , code : 95 Userdata Superblock contents:: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................; 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................; 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................; 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................; 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................; 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................; 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................; 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................; Done.                     فول دامپ تست شده هارد سامسونگ Galaxy A01 Core - A013G باینری U4 ____________________________________________________________ اطلاع از جدیدترین محصولات و برخورداری از محصولات رایگان و کدهای تخفیف در: ->>کانال تلگرام فایل فلش ،اخبار ،فایل رایگان و ....کانال تلگرام ابزار و دامپ ، اجناس و .... Read the full article