#roland TDW

[1864-66readingproject]

Also I knew it! (re the Stranger and Izzy's family and Roland) Really glad that paid off! There was a bit a few months ago where I real thought none of that was going to be relevant again lol.

[open-e-drums]

Disassemble Roland VH-10

A little while ago when Roland released the TD -17, a hi-hat called the VH -10 was released.

There are some differences in specs, the VH -11 uses a metal part for the controller, and the cymbal part is slightly thicker and heavier.

I use an older Roland sound module TD-10 with TDW-1, which supports VH-11. The basic structure of VH-10 and VH-11 are similar, so VH-10 worked just fine with my TD-10.

VH -10 doesn't have much information, but this video explains the difference between VH -11 and VH -10 in detail.

  Let's take it apart.

The VH -10/VH -11 consists of a cymbal and a controller.

The cymbal part is on hold this time. It's just a piezo and a film switch. I will compare it with cymbals made by YAMAHA next time.

Disassemble the controller. You just need to remove 3 screws on the bottom.

It will look like this when the bottom lid comes off.

A flexible board is a sensor. Same as FSR, variable resistance. A white roller attached to the front part rolls over the sensor to detect its position. If the roller touches the sensor directly, the sensor may be damaged, so a silicone sheet is attached.

If you're building your own, you can use SoftPot.

The roller is rolling over the sensor to detect the position. It's hard to see in the picture, but it's structured so that the roller is pressed against the sensor with a spring. It's a simple structure.

I didn't think I needed to take it apart any more, so I put it back.

Next, let's look at the signal on the oscilloscope. The high-hat controller uses a stereo cable, so it has three wires.

Wire it as shown in the image below and read the voltage on the yellow line that connects to pin A0.

The results are as you would expect. Press to increase voltage.

And it goes down when you release it.

Let's watch it on GIF.

This controller uses FSR that I made before. As you can see from the oscilloscope signal, you can use it with the Roland sound module.

I made a hi-hat controller with TCRT 5000 before, but I didn't know much about it at that time, so I didn't think about the circuit carefully.

I think I can use this in the Roland module if I modify the circuit a little. What I like about the optical type is that it doesn't need mechanical structure, so it's easy to design. And less parts.

I don't know if I can, but next time I'll see if an optical high hat controller using TCRT 5000 will work with the Roland sound module.

[drumscovande]

Roland TDW-20 Expansion TDW20 TD-20 Expanded Drum Module Brain V Drum Card https://ift.tt/3mmuPym

[preownedshop]

Roland TDW 20 EXPANDED V Drums W/ 4 Hart Accupad Toms, 8 Cymbals, More

Pre-Owned Roland TDW 20 EXPANDED V Drums W/ 4 Hart Accupad Toms, 8 Cymbals, More For Sale

$1,679.00 (0 Bids) End Date: Saturday Sep-14-2019 15:17:26 PDT Buy It Now for only: $2,195.00 Buy It Now | Bid now | Add to watch list

from WordPress https://preownd.net/used-instruments/drums/roland-tdw-20-expanded-v-drums-w-4-hart-accupad-toms-8-cymbals-more/

[temptation-revelation]

Roland TD-20X http://bit.ly/2xjlst9

The TD-20X combines the features of Roland’s TD-20 and TDW-20 in one unit, with hundreds of expressive, dynamic sounds onboard, plus new ambience and the latest V-Edit including Kit Resonance.

World-leading Percussion module with COSM® technology

920 drum instruments and 100 drum kits onboard

New ambience choices optimized for a wide variety of live environments

New compression algorithms for unprecedented power and punch

99 internal patches, convenient backup via CF card

[easyazon_block add_to_cart=”default” align=”left” asin=”B000T4NHKC” cloaking=”default” layout=”left” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”electroni06ce-20″]

Specs

Sound Generator

Variable Drum Modeling

Maximum Polyphony

64 Voices

Instruments

Drum Instruments: 920, Backing Instruments: 262

Drum Kits

100

Drum Kit Chains

16 chains (32 steps per chain)

Ambience Parameters

Room Type (25 types),

Room Size,

Wall Type,

Mic Position,

Room Shape

Mixer Parameters

Volume,

Pan,

Minimum Volume,

Ambience Send Level,

Multi-Effects Send Level,

Output Assign

Effect Types

Pad Equalizer (each pad),

Pad Compressor (each pad),

Multi-Effects: 13 types,

Master Compressor,

Master Equalizer,

Reverb (for backing part),

Chorus (for backing part)

Percussion Sets

8

Sequencer

User Patterns: 100,

Preset Patterns: 150,

Parts: 6,

Maximum Note Storage: approx. 20,000 Notes,

Tempo: 20 to 260,

Click Instruments: 20

Display

64 x 240 dots (backlit graphic LCD),

7 segments,

3 characters (LED),

Trigger Level Indicator (LED)

Faders

8

Preview Button

Yes

Connectors

Trigger Input Jack x 15,

Hi-Hat Control Jack (VH series, FD series),

Master Output Jacks (L/MONO, R),

Direct Output Jack x 8,

Digital Output Jack (COAXIAL type, 44.1 kHz / 24-bit),

Headphones Jack (Stereo 1/4 inch phone type),

Mix in Jack (Stereo 1/4 inch phone type),

MIDI Connectors (IN, OUT/THRU),

Foot Switch Jack (1/4 inch TRS phone type),

CompactFlash Card Slot,

AC Inlet

Output Impedance

1.0 kΩ

Power Supply

AC 117V, AC 230 V, AC 240 V (50/60 Hz), AC 220 V (60 Hz)

Power Consumption

16 W

Accessories

Owner’s Manual, Power Cord

Options

Pads (PD series, PDX series),

Cymbals (CY series),

Kick Triggers (KD series),

Hi-Hat (VH series),

Hi-Hat Control Pedal (FD series),

Stands (MDS series),

Cymbal Mount (MDY series),

Pad Mount (MDH series)

Size and Weight

Width

307 mm

12-1/8 inches

Depth

256 mm

10-1/8 inches

Height

105 mm

4-3/16 inches

Weight

2.7 kg

6 lbs.

Source: http://www.rolandus.com

The post Roland TD-20X appeared first on Electronic-drums.info.

May 22, 2019 at 06:35AM http://bit.ly/2uPZlHc

[mywiseshopping-blog]

ROLAND V-PRO V-Drums TDW-20 Expanded TD-20 NO

http://dlvr.it/Q9tgh5

[sanfranbaycraigslistfraudblog]

Roland/Alessis Electronic Drums and Sound System (pittsburg / antioch) $1490

Roland Td-10 V-Drums with TDW-1 expansion module combined with Alessis DM8 set. Also have small PA for playback. Items listed below. My price is slightly negotiable, but I do not negotiate by text or email. Bring cash and let's deal. Roland kit -TD ... from Craigslist https://sfbay.craigslist.org/eby/msg/d/roland-alessis-electronic/6406207145.html Fraud Bloggs made possible by: http://circuitgenie.wix.com/techsupport

[drumpadvideo-blog]

New Post has been published on https://www.drumpad.video/g-rad-black-sabbath-n-i-b-drum-cover-with-drumless-track-on-diy-tama-v-drums/

G-Rad: Black Sabbath - N.I.B. drum cover with drumless track on DIY Tama V-Drums

Fun song, and a good test of my new cake pans. Also, I converted a GH:WT cymbal to work with my TD-10. The kit is a Tama Rockstar with full size bass drum, snare, and toms. There actually is a 2nd bass drum to this kit, and I plan to add it eventually. This backing track is another drumless track and I madeth drums my own. You do NOT have toclone the originl drums to make a good cover. No two drummers are identical. My drums are connected to a Roland TD-10 with TDW-1 and V-Cymbal Control. They trigger Toontrack Superior Drummer 2 via MIDI to my PC. Enjoy!

The cake pans in the toms and snare are both dual triggered for head and rim triggering. My TD-10 does not support piezo sensor rim triggers on the toms, but that’s okay. I would hope to, soon, get a new module anyways (TD-12 or TD-20), that does. Also, it’d give me more cymbal/aux inputs.

My GH:WT cymbal has a 1/4″ jack wired directly to the piezo that’s already inside the kit, which has been rewired and better secured to the playing surfac. It’s only a single zone and non-chokable It makes a perfect splash though!

Other future plans for the kit include replacing the 2 PD-9’s with new cymbals; maybe even DIY converted real ones, who knos, and as I mentioned, the addition of the 2nd basss drum.

Thanks goes out to the people on vdrums.com for help with everything – cake pans, the TD-10, and all the other v-drum gear I have usd in the past year. Also, special thanks to you guys, the subscribers, for supporting me.

[saskwildrose]

Roland TD-20SXRoland TD-20SX http://ift.tt/2xjUt0v

The new TD-20SX V-Pro series makes a full-impact impression onstage with its industrial brushed-metal* V-Pads, enlarged V-Kick, silver-colored V-Cymbals, and rock-solid chrome drum rack. The TD-20X drum module is loaded with hundreds of powerful and expressive sounds, and provides a newly integrated feature set that’s based on Roland’s famous TD-20 and TDW-20. Eye-catching looks, incredible sounds, and reinforced hardware make the TD-20SX a star on any stage.

Latest sounds and improved dynamics for a supremely natural, powerful drumming experience

Integrated feature set based on TD-20 and TDW-20

New V-Pads and V-Kick with attractive brushed-metal look

New silver-colored V-Cymbals® and V-Hi-Hat®

Custom covering system (interchangeable shell-wraps for V-Kick and V-Pads)

Newly designed hardware provides enhanced stability, style, and flexible mounting options

Kit Configuration

TD-20X Percussion Sound Module x 1

PD-125X V-Pad x 2

PD-125XS V-Pad (Snare) x 1

PD-105X V-Pad x 2

VH-12-SV V-Hi-Hat x 1

CY-14C-SV V-Cymbal Crash x 2

CY-15R-SV V-Cymbal Ride x 1

KD-140 V-Kick x 1

MDS-25 Drum Stand (Option) x 1 *Kick drum pedal, snare stand, and hi-hat stand not included

Options

Pad Mount (MDH series), Cymbal Mount (MDY series), V-Drums Accessory Package: DAP-3, V-Drums Mat: TDM-20, Personal Drum Monitor: PM-30, PM-10

Source: www.rolandus.com

The post Roland TD-20SX appeared first on Electronic-drums.info.

November 19, 2017 at 11:37AM

[asiasocietysandbox]

Roland TD-20SX http://ift.tt/2xjUt0v

The new TD-20SX V-Pro series makes a full-impact impression onstage with its industrial brushed-metal* V-Pads, enlarged V-Kick, silver-colored V-Cymbals, and rock-solid chrome drum rack. The TD-20X drum module is loaded with hundreds of powerful and expressive sounds, and provides a newly integrated feature set that’s based on Roland’s famous TD-20 and TDW-20. Eye-catching looks, incredible sounds, and reinforced hardware make the TD-20SX a star on any stage.

Latest sounds and improved dynamics for a supremely natural, powerful drumming experience

Integrated feature set based on TD-20 and TDW-20

New V-Pads and V-Kick with attractive brushed-metal look

New silver-colored V-Cymbals® and V-Hi-Hat®

Custom covering system (interchangeable shell-wraps for V-Kick and V-Pads)

Newly designed hardware provides enhanced stability, style, and flexible mounting options

Kit Configuration

TD-20X Percussion Sound Module x 1

PD-125X V-Pad x 2

PD-125XS V-Pad (Snare) x 1

PD-105X V-Pad x 2

VH-12-SV V-Hi-Hat x 1

CY-14C-SV V-Cymbal Crash x 2

CY-15R-SV V-Cymbal Ride x 1

KD-140 V-Kick x 1

MDS-25 Drum Stand (Option) x 1 *Kick drum pedal, snare stand, and hi-hat stand not included

Options

Pad Mount (MDH series), Cymbal Mount (MDY series), V-Drums Accessory Package: DAP-3, V-Drums Mat: TDM-20, Personal Drum Monitor: PM-30, PM-10

Source: www.rolandus.com

The post Roland TD-20SX appeared first on Electronic-drums.info.

November 19, 2017 at 12:37PM

[1864-66readingproject]

End of July's part of The Doctor's Wife. Don't have much to say other than 😩😩😩😩😩😩

[klouherout]

Roland TD-20SX http://ift.tt/2xjUt0v

The new TD-20SX V-Pro series makes a full-impact impression onstage with its industrial brushed-metal* V-Pads, enlarged V-Kick, silver-colored V-Cymbals, and rock-solid chrome drum rack. The TD-20X drum module is loaded with hundreds of powerful and expressive sounds, and provides a newly integrated feature set that’s based on Roland’s famous TD-20 and TDW-20. Eye-catching looks, incredible sounds, and reinforced hardware make the TD-20SX a star on any stage.

Latest sounds and improved dynamics for a supremely natural, powerful drumming experience

Integrated feature set based on TD-20 and TDW-20

New V-Pads and V-Kick with attractive brushed-metal look

New silver-colored V-Cymbals® and V-Hi-Hat®

Custom covering system (interchangeable shell-wraps for V-Kick and V-Pads)

Newly designed hardware provides enhanced stability, style, and flexible mounting options

Kit Configuration

TD-20X Percussion Sound Module x 1

PD-125X V-Pad x 2

PD-125XS V-Pad (Snare) x 1

PD-105X V-Pad x 2

VH-12-SV V-Hi-Hat x 1

CY-14C-SV V-Cymbal Crash x 2

CY-15R-SV V-Cymbal Ride x 1

KD-140 V-Kick x 1

MDS-25 Drum Stand (Option) x 1 *Kick drum pedal, snare stand, and hi-hat stand not included

Options

Pad Mount (MDH series), Cymbal Mount (MDY series), V-Drums Accessory Package: DAP-3, V-Drums Mat: TDM-20, Personal Drum Monitor: PM-30, PM-10

Source: www.rolandus.com

The post Roland TD-20SX appeared first on Electronic-drums.info.

November 19, 2017 at 11:37AM

[religion-of-peace]

Roland TD-20SX http://ift.tt/2xjUt0v

The new TD-20SX V-Pro series makes a full-impact impression onstage with its industrial brushed-metal* V-Pads, enlarged V-Kick, silver-colored V-Cymbals, and rock-solid chrome drum rack. The TD-20X drum module is loaded with hundreds of powerful and expressive sounds, and provides a newly integrated feature set that’s based on Roland’s famous TD-20 and TDW-20. Eye-catching looks, incredible sounds, and reinforced hardware make the TD-20SX a star on any stage.

Latest sounds and improved dynamics for a supremely natural, powerful drumming experience

Integrated feature set based on TD-20 and TDW-20

New V-Pads and V-Kick with attractive brushed-metal look

New silver-colored V-Cymbals® and V-Hi-Hat®

Custom covering system (interchangeable shell-wraps for V-Kick and V-Pads)

Newly designed hardware provides enhanced stability, style, and flexible mounting options

Kit Configuration

TD-20X Percussion Sound Module x 1

PD-125X V-Pad x 2

PD-125XS V-Pad (Snare) x 1

PD-105X V-Pad x 2

VH-12-SV V-Hi-Hat x 1

CY-14C-SV V-Cymbal Crash x 2

CY-15R-SV V-Cymbal Ride x 1

KD-140 V-Kick x 1

MDS-25 Drum Stand (Option) x 1 *Kick drum pedal, snare stand, and hi-hat stand not included

Options

Pad Mount (MDH series), Cymbal Mount (MDY series), V-Drums Accessory Package: DAP-3, V-Drums Mat: TDM-20, Personal Drum Monitor: PM-30, PM-10

Source: www.rolandus.com

The post Roland TD-20SX appeared first on Electronic-drums.info.

November 19, 2017 at 10:37PM

[drumscovande]

Roland TD-10 TDW V-Drums Module Brain Cables Power TD10 https://ift.tt/3lJxCS1

[son50x]

Roland TD-20SX http://ift.tt/2xjUt0v

The new TD-20SX V-Pro series makes a full-impact impression onstage with its industrial brushed-metal* V-Pads, enlarged V-Kick, silver-colored V-Cymbals, and rock-solid chrome drum rack. The TD-20X drum module is loaded with hundreds of powerful and expressive sounds, and provides a newly integrated feature set that’s based on Roland’s famous TD-20 and TDW-20. Eye-catching looks, incredible sounds, and reinforced hardware make the TD-20SX a star on any stage.

Latest sounds and improved dynamics for a supremely natural, powerful drumming experience

Integrated feature set based on TD-20 and TDW-20

New V-Pads and V-Kick with attractive brushed-metal look

New silver-colored V-Cymbals® and V-Hi-Hat®

Custom covering system (interchangeable shell-wraps for V-Kick and V-Pads)

Newly designed hardware provides enhanced stability, style, and flexible mounting options

Kit Configuration

TD-20X Percussion Sound Module x 1

PD-125X V-Pad x 2

PD-125XS V-Pad (Snare) x 1

PD-105X V-Pad x 2

VH-12-SV V-Hi-Hat x 1

CY-14C-SV V-Cymbal Crash x 2

CY-15R-SV V-Cymbal Ride x 1

KD-140 V-Kick x 1

MDS-25 Drum Stand (Option) x 1 *Kick drum pedal, snare stand, and hi-hat stand not included

Options

Pad Mount (MDH series), Cymbal Mount (MDY series), V-Drums Accessory Package: DAP-3, V-Drums Mat: TDM-20, Personal Drum Monitor: PM-30, PM-10

Source: www.rolandus.com

The post Roland TD-20SX appeared first on Electronic-drums.info.

November 20, 2017 at 02:37AM

[temptation-revelation]

Roland TD-20SX http://bit.ly/2xjUt0v

The new TD-20SX V-Pro series makes a full-impact impression onstage with its industrial brushed-metal* V-Pads, enlarged V-Kick, silver-colored V-Cymbals, and rock-solid chrome drum rack. The TD-20X drum module is loaded with hundreds of powerful and expressive sounds, and provides a newly integrated feature set that’s based on Roland’s famous TD-20 and TDW-20. Eye-catching looks, incredible sounds, and reinforced hardware make the TD-20SX a star on any stage.

Latest sounds and improved dynamics for a supremely natural, powerful drumming experience

Integrated feature set based on TD-20 and TDW-20

New V-Pads and V-Kick with attractive brushed-metal look

New silver-colored V-Cymbals® and V-Hi-Hat®

Custom covering system (interchangeable shell-wraps for V-Kick and V-Pads)

Newly designed hardware provides enhanced stability, style, and flexible mounting options

Kit Configuration

TD-20X Percussion Sound Module x 1

PD-125X V-Pad x 2

PD-125XS V-Pad (Snare) x 1

PD-105X V-Pad x 2

VH-12-SV V-Hi-Hat x 1

CY-14C-SV V-Cymbal Crash x 2

CY-15R-SV V-Cymbal Ride x 1

KD-140 V-Kick x 1

MDS-25 Drum Stand (Option) x 1 *Kick drum pedal, snare stand, and hi-hat stand not included

Options

Pad Mount (MDH series), Cymbal Mount (MDY series), V-Drums Accessory Package: DAP-3, V-Drums Mat: TDM-20, Personal Drum Monitor: PM-30, PM-10

Source: www.rolandus.com

The post Roland TD-20SX appeared first on Electronic-drums.info.

May 11, 2019 at 06:36PM http://bit.ly/2uPZlHc