#oil furnance

[if-you-fan-a-fire]

“Now Every Home Can Have OIL HEATING,” Kingston Whig-Standard. October 22, 1932. Page 3. ---- At less than half what you would expect to pay - the NEW SILENT GLOW OIL BURNER converts your hot-air or bot-water furnace into a clean, convenient oil heating unit.

Good-bye coal shovel and coal bins! No more ashes, smoke or soot ...and a steady even heat at the temperature you like. Let us show you how Silent Glow will save you money and needless labour next winter. 

Completely installed ready for use with 250 gallon storage tank and float feed, the NEW SILENT GLOW furnace burner ...

Only $195

125,000 HOMES have chosen SILENT GLOW became of itx exclusive features end efficient operation “SAVES FUEL”

[The revolution in home heating in the 1930s - sold by Jos. Abramsky & Sons, Ltd., in what used to be Kingston, Ontario’s, ‘Little Jerusalem’]

[theriverbeyond]

THE ANTICAPITALIST MESSAGING IN HADESTOWN TOOK ME SO COMPLETELY BY SURPRISE IN SUCH A GOOD WAY AND I HAVEN'T SEEN ENOUGH PEOPLE TALKING ABOUT IT BECAUSE ITS SO GOOD AND IT WORKS WITH THEIR STORY SO WELL

YEAH EXACTLY Im like... is it all just so obvious everyone decided it's redundant to mention or??? HELLO???

And I was sitting in the audience as one does and Chant was actually the song that reframed the entire show for me -- up until then I was like "aw :') theyre falling in love and are doomed, I should google all these lyrics later" but that song just... I felt like I was being hit in the face w a fish, honestly!!

"In the coldest time of year/ Why is it so hot down here?/ Hotter than a crucible/ It ain't right and it ain't natural"

"In the darkest time of year/ Why is it so bright down here?/ Brighter than a carnival/ It ain't right and it ain't natural"

Persephone's lyrics here are so specific -> a "crucible" is an ancient tool that can be used to create art but also industrialized into mass production, a "carnival" something that is inherently about celebration and festivity and joy but it is also a thing that can be commercialized almost beyond recognition. Capitalism is ravenous and will never be satiafied or sated, it will steal & exploit every scrap of art and joy that it can, then corrupt it all into hollow immitations that it then sells back to you on websites like SHEIN and Disney+.

"It ain't right and it ain't natural" hits so hard in this song because nothing is as natural, or as "right", as death -- so obviously Persephone is NOT talking about the literal underworld to the literal god of the dead. She's talking about how we need to stay warm and safe and dry in the winter, but we don't need fresh summer fruits imported from thousands of miles away. We need to stay cool and safe and hydrated in the summer, but we don't need to steal water from another state to keep the golf courses green. The winter is natural, the cold is natural, seeking warmth and light is natural. What is unnatural is this overconsumption, this never ending, never satisfied hunger.

And then of course you have Hades' parts,

Here, I fashioned things of steel/ Oil drums and automobiles/ Then I kept that furnace fed/ With the fossils of the dead

And wasn't it electrifying/ When I made the neon shine!/ Silver screen, cathode ray/ Brighter than the light of day

And obviously "fossils of the dead" is a reference to Hades being the literal god of the dead, in the ground, in the underworld, and it is also a reference to the modern dependence on oil and fossil fuels, but TO ME it is also about how capitalism relies on the exploitation of workers. In this show, the "fossils of the dead" are literally Hades' subjects. They're the workers of his factory town, and he both exploits them and is fully dependent on them, just like how the furnance of industry/capitalism relies on YOUR body, YOUR labor, it eats you when you're alive and it often continues to eat you when you're dead.

And then like "wasn't it electrifying" -> it's EXCITING what technology and industry does, but the problem is the overconsumption and the overproduction ("Brighter than the light of day") beyond what anyone actually needs or even wants. It ain't right and it ain't natural!!!

Every year, it's getting worse/ Hadestown, hell on Earth!

And the wind is so strong/ That's why times are so hard/ It's because of the gods/ The gods have forgotten the song of their love

Lover, what have you become/ Coal cars and oil drums/ Warehouse walls and factory floors/ I don't know you anymore

And it all keeps building in this song, re-emphasizing that Hades is not who he once was, that he has changed. Which again is not only commentary about consumption vs overconsumption, and how so many things started as wonderful ideas that could save people and help people and help make the world better were corrupted and turned into profit machines, killing machines, etc. "The gods have forgotten the song of their love" UGH

I also think the Themes are magnified because this is presented extremely directly alongside Euridyce's growing desperation, especially with the context that Euridyce DOES, in fact, "sell out" to Hades' promises.

There is no food left to find/ It's hard enough to feed yourself/ Let alone somebody else

Desperation forces her hand, she turns to Hades because he offers salvation, and she ends up just another nameless worker turning the gears of his machine. And I feel this is so similar to how when rich people are like "Just do XYZ", or telling people to bootstrap, or selling quick fixes to desperate people, when the reality is they got where they did due to a combination of luck, pre-existing social/monetary capital, etc, and buying into their promises of wealth will only make them richer and you more dependent and vulnerable.

[sonalisalagare]

Heat Treatment Furnace

We provide batch, bogie and continuous types of furnances. Electrical and oil-fired furnaces are available. Mainly used for processes like carburizing, case hardening, annealing, and nitriding.

[fionabraylen]

Furnance Maintance 101

When it comes to your furnace you need to be aware of how to clean it properly so that it will function properly. The biggest enemy of a furnace is dirt and dust. Having a dirty furnace will lead to wasted fuel and can drastically lower the efficiency of your furnace. All three basic components of your furnace are affected by dirt which is why cleaning is the most important step in maintaining your furnace regularly.

Parts of the Furnace that Require Maintenance

The three parts of your furnace that need to be cleaned thoroughly are the filter system, the blower and lastly the motor. At the beginning of the heating season and about once a month of continued use you should have the furnace filter replaced or cleaned. A good way to check if your filter needs to be cleaned or replaced is by removing the filter and holding up to the light. If you happen to notice that it clogged you should replace it with a new filter of the same type and size no matter how long the filter has been in use.

Cleaning the Blower Assembly

Be sure to clean the blower assembly, belts and pulleys to the blower just as well as the motor housing. Cleaning your furnace’s blower is vital if it has a squirrel cage fan. This is due to the opening in this type of blower as they all to often become clogged with dirt. In order to clean your blower, you must remove the panel that covers the filter to get access to the blower or panel on the front of the furnace. This type of panel may be slip fit on hooks or can be held by a series of retaining screws. The sliding out fan units help up by screws on a track is usually how to gain access to the inside of the furnace’s blower. If the power cord to fan assembly is not long enough to allow the fan unit to slide all the way outwards you will need to disconnect the cord. the Be sure to mark the wire connection first so you will be able to remember how to reassemble the unit properly. You can use a toothbrush to clean each fan blade and the spaces in between bladed. To remove all the dirt and debris you have made loose using the toothbrush you can use a vacuum cleaner hose to get rid of all the mess. The motor has belts and pulleys included in the housing of the motor and simply wiping the housing clean will help prevent the buildup of heat within the motor. Most motors have permanent lubrication and have been sealed by the manufactures so there is no need to do anything in this area. However, there are some motors which have covered oil port just above the bearings near the motor shaft. If this is the type of motor in your furnace it needs to be lubricated yearly. You will need to apply two or three drops of 10-weight non-detergent motor oil to each port and be sure it is not the all-purpose oil and not to over lubricate. The same procedure will need to be done if the shaft of the blower has oil ports as well by being sure it is lubricated annually. Making sure your motor will be running cool is to keep it clean and clean it properly. You will most likely have to remove an access place in order to get to all the ports. If the furnace blower has grease cups opposed to oil ports you will have to remove the screw caps that cover the caps and then fill the cups with a bearing lubricant. Bearing lubricants can be found at automobile and hardware stores.

Checking the Furnace Belts

While you are lubricating the motor you should also check the belts as well. If you see that the belts are worn or frayed you will need to replace them with new belts of the same size and type. To replace a belt you will need to use a wrench to remove the belt. Carefully loosen up the bolts with your wrench and be sure not to loosen the bolts all the way. They just need to be loose enough to move the motor in one direction slightly. Have the motor and the blower close together enough so the belt on will no longer be pulled tight and is ready to be taken off. Take the belt off by pulling around the wheel pulley and then the motor pulley. You should also inspect for any dirt or debris that may interfere with the motor or belt. When you are sure the area of where the new belt is to be placed is clean you can now place on the pulleys the motor’s side first and then the wheel side. Slightly pull the motor back and away from the blower again. The new belt should be tight but also show give about a half inch when pressure is applied. To be sure you can test by using a screwdriver to gently press on the belt in the middle of both pulleys. Once you get the motor in the position you want you can tighten the bolts back down. The next step would be to attach the panel back to the furnace, the circuit breaker can be back on if you had turned it off and then set your thermostat back to the normal settings. Once you power your furnace back up your new belt should have the motor running quietly and efficiently.

Using all these methods to keep your furnace clean and well maintained will ensure to have your system running nice and smooth. If you do not do this sort of yearly inspection and cleaning of your furnace, it can lead to easily avoidable problems. For example, a system can just simply wear itself our quickly, pump carbon monoxide into your or just stop working. This is what you want to avoid and can be done just keeping your furnace clean.

The post Furnance Maintance 101 appeared first on KCS Heating and Air.

source https://www.kcsheatingair.com/furnance-maintance-101/ from https://kcsheatingandair.blogspot.com/2018/12/furnance-maintance-101.html

[sienajaxen]

Furnance Maintance 101

When it comes to your furnace you need to be aware of how to clean it properly so that it will function properly. The biggest enemy of a furnace is dirt and dust. Having a dirty furnace will lead to wasted fuel and can drastically lower the efficiency of your furnace. All three basic components of your furnace are affected by dirt which is why cleaning is the most important step in maintaining your furnace regularly.

Parts of the Furnace that Require Maintenance

The three parts of your furnace that need to be cleaned thoroughly are the filter system, the blower and lastly the motor. At the beginning of the heating season and about once a month of continued use you should have the furnace filter replaced or cleaned. A good way to check if your filter needs to be cleaned or replaced is by removing the filter and holding up to the light. If you happen to notice that it clogged you should replace it with a new filter of the same type and size no matter how long the filter has been in use.

Cleaning the Blower Assembly

Be sure to clean the blower assembly, belts and pulleys to the blower just as well as the motor housing. Cleaning your furnace’s blower is vital if it has a squirrel cage fan. This is due to the opening in this type of blower as they all to often become clogged with dirt. In order to clean your blower, you must remove the panel that covers the filter to get access to the blower or panel on the front of the furnace. This type of panel may be slip fit on hooks or can be held by a series of retaining screws. The sliding out fan units help up by screws on a track is usually how to gain access to the inside of the furnace’s blower. If the power cord to fan assembly is not long enough to allow the fan unit to slide all the way outwards you will need to disconnect the cord. the Be sure to mark the wire connection first so you will be able to remember how to reassemble the unit properly. You can use a toothbrush to clean each fan blade and the spaces in between bladed. To remove all the dirt and debris you have made loose using the toothbrush you can use a vacuum cleaner hose to get rid of all the mess. The motor has belts and pulleys included in the housing of the motor and simply wiping the housing clean will help prevent the buildup of heat within the motor. Most motors have permanent lubrication and have been sealed by the manufactures so there is no need to do anything in this area. However, there are some motors which have covered oil port just above the bearings near the motor shaft. If this is the type of motor in your furnace it needs to be lubricated yearly. You will need to apply two or three drops of 10-weight non-detergent motor oil to each port and be sure it is not the all-purpose oil and not to over lubricate. The same procedure will need to be done if the shaft of the blower has oil ports as well by being sure it is lubricated annually. Making sure your motor will be running cool is to keep it clean and clean it properly. You will most likely have to remove an access place in order to get to all the ports. If the furnace blower has grease cups opposed to oil ports you will have to remove the screw caps that cover the caps and then fill the cups with a bearing lubricant. Bearing lubricants can be found at automobile and hardware stores.

Checking the Furnace Belts

While you are lubricating the motor you should also check the belts as well. If you see that the belts are worn or frayed you will need to replace them with new belts of the same size and type. To replace a belt you will need to use a wrench to remove the belt. Carefully loosen up the bolts with your wrench and be sure not to loosen the bolts all the way. They just need to be loose enough to move the motor in one direction slightly. Have the motor and the blower close together enough so the belt on will no longer be pulled tight and is ready to be taken off. Take the belt off by pulling around the wheel pulley and then the motor pulley. You should also inspect for any dirt or debris that may interfere with the motor or belt. When you are sure the area of where the new belt is to be placed is clean you can now place on the pulleys the motor’s side first and then the wheel side. Slightly pull the motor back and away from the blower again. The new belt should be tight but also show give about a half inch when pressure is applied. To be sure you can test by using a screwdriver to gently press on the belt in the middle of both pulleys. Once you get the motor in the position you want you can tighten the bolts back down. The next step would be to attach the panel back to the furnace, the circuit breaker can be back on if you had turned it off and then set your thermostat back to the normal settings. Once you power your furnace back up your new belt should have the motor running quietly and efficiently.

Using all these methods to keep your furnace clean and well maintained will ensure to have your system running nice and smooth. If you do not do this sort of yearly inspection and cleaning of your furnace, it can lead to easily avoidable problems. For example, a system can just simply wear itself our quickly, pump carbon monoxide into your or just stop working. This is what you want to avoid and can be done just keeping your furnace clean.

The post Furnance Maintance 101 appeared first on KCS Heating and Air.

from https://www.kcsheatingair.com/furnance-maintance-101/ from https://ift.tt/2BeLay9

[vakhas-blog]

Heating tape Market Shares, Strategies and Forecast Worldwide, 2018 to 2028

Heating tape - Market Overview

Heating tape is a type of variety of cables and cords that can be installed on the roof and gutters to prevent ice dams or wrap around exposed pipes to prevent them from bursting in the snowy regions during winter. Heating tape is used to maintain or raise the temperature of a piece of equipment. For the roof, the heating tape must be minimally flexible, for the pipes, it is thin and supple. The heating tape is essentially resistive to heaters, and it carries a conducting wire that gets hot when electricity flows through it. Some heating tape also has an inline thermostat that monitors the temperature to prevent overheating. The need for heating tape is growing more in the snowy regions as it is mostly used for wrapping roof and pipe.

Heating tape - Market Dynamics

The heating tape has vast applications in the industrial sector, commercial and residential sector and transportation sector that were driving the market. The heating tape is mainly used as freeze protection in oil and gas industry, power generation, water and waste treatment plants and pharmaceuticals industry. The growth in the industrial sector drives the demand for the heating tape in the market. The heating tape is wrapped on pipes to protect it from freezing. It is also used for underfloor heating, roof and gutter heating. This is likely to enhance the demand for heating tapes and aid in the expansion of the heating tapes market. The heating tape market is going to increase, as it has a wide application in the snowy regions. It is also used for preventing condensation.

Request 100 Page Sample Report Now: https://www.factmr.com/connectus/sample?flag=S&rep_id=2013

But the market for heating tape is hampered by heating traces, as it has a thermostat and temperature indicator for preventing overheating. So, it will decrease the market demand for heating tape.

Heating tape - Market Regional Analysis

In terms of regional demand, the Heating tape market can be segmented into seven regions: North America, Latin America, Europe, CIS & Russia, Japan, APEJ (Asia Pacific except Japan) and the Middle East and Africa. The North America shows higher growth in terms of demand and sales, the demand in cold regions will be more as compared to the other regions. The Europe and Japan markets show moderate growth in the market. The demand in Asia Pacific countries including India and South Korea will increase in the coming years. The other regions show a stagnant rate of growth for heating tape market.

Heating tape - Market- Key Manufacturer

The market player for heating tapes are HTS\ AMTEK CO, Wattco, CS hydo company, The Cary Company, C-T products company, hi tech furnance system, Anderson bolts, pretherm industries, Omega Engineering,  Flexotherm Brand Heated Products, OEM heaters, Tesa Tap, Clay bore lab, heater sensor, and Therm X.

Request For Brochure @ https://www.factmr.com/connectus/sample?flag=B&rep_id=2013

Heating tape – Market Competitive Analysis

The heating market is fragmented because of its numerous applications in various sectors. The competition in market players is also high. The heating tape is available at specialty stores, which creates a competition among the market. Therefore, to remain in sync with the demand, the manufacturers should avail the products. And the other factor that may create competition is the technological advancement so the manufacture should come up with the innovative products at a cost efficient price.

This analytical research study imparts an all-inclusive assessment on the market, while propounding historical intelligence, actionable insights, and industry-validated & statistically-upheld market forecast. Verified and suitable set of assumptions and methodology has been leveraged for developing this comprehensive study. Information and analysis on key market segments incorporated in the report has been delivered in weighted chapters. A thorough analysis has been offered by the report on

Report Analysis @ https://www.factmr.com/report/2013/heating-tape-market

Compilation of authentic and first-hand intelligence, insights offered in the report are based on quantitative and qualitative assessment by leading industry experts, and inputs from opinion leaders & industry participants around the value chain. Growth determinants, macroeconomic indicators, and parent market trends have been scrutinized and delivered, coupled with the market attractiveness for each market segment encompassed. Qualitative impact of growth influencers on the market segments across regions has also been mapped by the report.

[magneticseparators-blog1]

Industrial Magnet, Permanent Magnetic Equipments, Magnetic Separators, Material Handling Eqiupments, Rare Earth Magnet

An separator can be a device which utilizes a magnet to eliminate impurities and different materials from metal. Separators can be corrected to attract unique kinds of magnetic materials and might be utilized before, during, and after production of a material. Though their usage is industrial in character magnetic separators are used for a variety of applications. Magnetic separators may vary in size in the table top variation to your heavy drum that is used in recycling and different software and could be either ferromagnetic or paramagnetic.

How a Magnetic Separator Works A magnetic separator is made up of powerful magnet that is either laid down or suspended from a ceiling or apparatus. Materials may be passed over a tabletop separator in order to extract its own impurities, while suspended separators encounter above a material. Magnetic separators are also cylinders that objects are passed through. The material that a magnetic separator purifies may take the kind of a product, parts, or liquid metal.

Applications Magnetic separators are often used for industrial purposes such as recycling and manufacturing. They're also utilized in scientific labs which often require metallic substances that are without any impurities (and true in chemistry). In cases like this, the separator is by forcing either all or any of the substances in one substance into a container a cylinder or flask that averts cross-contamination between two substances.

Advantages Magnetic separators tend to be powerful, mobile, and can be corrected to remove varying sorts of magnetic substances from a solid or liquid. They are most reliable when applied to a liquid, even though removing impurities is possible. Magnetic separators are exceptionally simple and quite versatile in design. A basic separator could be constructed using a clamp and a potent magnet to keep down the stuff.

Disadvantages The principal disadvantage of Magnetic Separators Manufacturer will be that they must be always maintained. The magnetic separator has to be discharged or spilled down as a way to remove whilst oil has to be inserted to some moving parts materials which have collected. In the case of an electromagnetic separator, the electro magnet needs to be in a position to be turned off in any moment in case of an emergency.

The past week had been particularly angsty, and I broke my self-imposed Kathmandu sobriety in order to down a bottle of red at a Bollywood-themed party. I woke up tstill able to taste the menthol cigarettes I had greedily sucked down, and I was dangerously close to being hungover.But not so close that I was willing to break my plans for some Saturday morning yoga. I stood amidst the crowd of people and waited for a few minutes, until an American man came blustering into the studio. “Sorry guys!” Magnetic Handling He announced. “So sorry I am late!” I was really confused. What did he mean, late? It was still fifteen minutes before the class was scheduled to start!We all headed into the room, and I set my handbag down and popped over to the loo to take a quick pre-yoga pee (always important). When I returned I noticed something strange. The others were sitting on blankets and bolsters. No yoga mats, and the teacher, Frank, was already instructing despite the fact that it was only 9:20. What in the holy hell was going on?!The first word I registered Frank saying was “death.” It slowly started to dawn on me. This was not a yoga class. This was a meditation class.I glanced over at the schedule on the wall and it was confirmed: This was the 8:50am Saturday morning meditation. The “9:30″ class that I had viewed online was indeed taking place…. all the way in Patan at one of Pranayama’s other studios. I had misread the website, and ended up in a meditation. Exactly the place I was most scared to be.My error was not the only factor that led to this fateful coincidence. On any other Saturday, had I made the same mistake I would have arrived at the studio and been faced with a locked door, the class half-completed. I would have checked the posted schedule, realized my mistake and left. However, this week, the one week that it mattered – Frank was late. He arrived 25 minutes late, seconds after I myself had arrived.When I put all of this together in my head and realized that we were about to do one of the meditations I find most meaningful — death meditation — tears sprung into my eyes. “What a wonderful karmic surprise,” I thought, “and how fucking terrifying.”See, karma or fate or God or pure chance — however you want to look at it — something got me on that cushion today. Some kind of wheel turned and set into motion the weird series of coincidences that led my sore post-trekking ass onto the floor of the yoga studio to sit and watch my breath and confront my own mortality.The purpose of vivid death visualizations are to remind you that at any moment you could die, and so you should never put off the important things in life. You should apologize to people you’ve wronged. You should forgive everyone who has wronged you. You should do things you love. You should pray to whatever you believe in. And most importantly, death meditation reminds you that you should fucking meditate.I tried to hide from the cushion, from the meditation — but it found me. Thank god. Thank Frank. And thank me.I arrived at the yoga studio at 9:10 that morning. The class wasn’t due to start until 9:30, so I was a little bit surprised to see a small clutch of people waiting outside the studio door. “Pfft. Eager!” I thought, a brief moment of irritation flickering in my mind.

This was my first yoga class in months, and I was eager to stretch and sweat. I had, admittedly, been a pretty epic slacker in regards to my spiritual practice lately. In November and December I spent six weeks at Kopan Monastery and during this time I was immersed in Dharma, convinced that I would never, ever EVER let myself fall off of the meditation wagon again.  After all, I would be living in Kathmandu, a city so steeped in Buddhism that I couldn’t possibly abandon my practice… This, it would seem, was overly optimistic.

The yoga class was described online as a magnetic destoner, which was good – I kind of needed something to kick my ass. For the past month I have only been meditating once a week, at the FPMT centre in Thamel and I will be honest: a lot of those sessions have been spent thinking solely about my favourite restaurant across the street.

Since moving to Kathmandu the previous month, I had been battling some minor depression and anxiety. I had been trying to get settled in this chaotic city, and despite making a lot of great new friends and doing rewarding work, I have been wracked with homesickness. This pining for Vancouver has been coupled with racing remorseful thoughts about the break-up of a five-year relationship – that ended 18 months ago. My mind has just been looking for scabs to pick, and the cushion has felt unreasonably scary. I decided that the yoga mat might be a more suitable place to ease back into mindfulness, a place to drag some of the demons out of my head and battle them physically instead.

Magnetic separator manufacturer | Magnet manufacturer | Permanent magnetic equipment | Permanent magnet Manufacturers | Rare earth magnetic equipments | All type of magnetic equipment | Industrial Magnet | Rare earth Magnet | Magnetic equipments manufacturer | Permanent magnetic separator | Single Drum type magnetic separator | Hopper magnet manufacturer | Magnet suppliers | Magnetic separators | Magnetic Plate manufacturers | Drawer magnet manufacturers | Magnetic separator | Magnetic drum separator | Roller type magnetic separator | Overband magnetic separator |  magnet manufacturer | Magnetic drum manufacturer | Magnetic rod manufacturer | Suspension magnet manufacturers | Magnetic pulley manufacturer | Magnets 

Permanent Magnetic Equipments :

Magnetic Destoner

Drum Type Magnetic Separator

Overband Magnetic Separator (OBMS)

Inline Drum Magnetic Separator

Permanent Magnetic Drum Pulley

Magnetic Coolant Separator

Trolly Mounted Suspension Magnet

Channel Magnet

Plate Magnet

Magnetic Head Pulleys for Conveyor Systems

Hopper Magnet

Trap Magnet / Magnetic Filter

Hand Magnet

Hump Magnet

Half Hump Magnet

Drawer Magnet

Belt Type Magnetic Separator / Belt Concentrator

Plate Housing Magnet / Deep Rich Magnet

Magnetic Floor Sweeper

Bin Activator

Auto Cleaning Hump Magnet

Pipeline Plate Magnet

Grill Magnet

Rotary Magnet

Self Cleaning Magnetic Grill

Spout Magnet

Magnetic Road

Wet Drum Magnetic Separator

Permanent Magnetic Lifters

Eddy Current Separator

Suspension Magnet

Electromagnetic Equipments :

Electro Magnetic Over Band Separator

Electro Magnetic Feero Filter / Slury Separator

Electro Magnetic Lifters

Electro Magnetic Suspension Magnet

Vibratory Equipments :

Vibrating Screening Machine

Vibratory Motor

Circular / Gyrator Vibro Screen

Electro Magnetic Vibratory Feeder

Vibratory Feeder

Vibratory Furnance Charger

Vibro Seprator

Vibratory Table

Pulsating Vibrator

Tubular Vibratory Feeder

Mineral Processing Equipments :

Shaking Table

Dry Gravity Table

Spiral Concentrator

Electro Static Separator

The past week had been particularly angsty, and I broke my self-imposed Kathmandu sobriety in order to down a bottle of red at a Bollywood-themed party. I woke up tstill able to taste the menthol cigarettes I had greedily sucked down, and I was dangerously close to being hungover.

But not so close that I was willing to break my plans for some Saturday morning yoga. I stood amidst the crowd of people and waited for a few minutes, until an American man came blustering into the studio. “Sorry guys!” He announced. “So sorry I am late!” I was really confused. What did he mean, late? It was still fifteen minutes before the class was scheduled to start!

We all headed into the room, and I set my handbag down and popped over to the loo to take a quick pre-yoga pee (always important). When I returned I noticed something strange. The others were sitting on blankets and bolsters. No yoga mats, and the teacher, Frank, was already instructing despite the fact that it was only 9:20. What in the holy hell was going on?!

The first word I registered Frank saying was “death.” It slowly started to dawn on me. This was not a yoga class. This was a meditation class.

I glanced over at the schedule on the wall and it was confirmed: This was the 8:50am Saturday morning meditation. The “9:30″ class that I had viewed online was indeed taking place…. all the way in Patan at one of Pranayama’s other studios. I had misread the Vibratory Motors Manufacturer ended up in a meditation. Exactly the place I was most scared to be.

My error was not the only factor that led to this fateful coincidence. On any other Saturday, had I made the same mistake I would have arrived at the studio and been faced with a locked door, the class half-completed. I would have checked the posted schedule, realized my mistake and left. However, this week, the one week that it mattered – Frank was late. He arrived 25 minutes late, seconds after I myself had arrived.

When I put all of this together in my head and realized that we were about to do one of the meditations I find most meaningful — death meditation — tears sprung into my eyes. “What a wonderful karmic surprise,” I thought, “and how fucking terrifying.”

See, karma or fate or God or pure chance — however you want to look at it — something got me on that cushion today. Some kind of wheel turned and set into motion the weird series of coincidences that led my sore post-trekking ass onto the floor of the yoga studio to sit and watch my breath and confront my own mortality.

The purpose of vivid death visualizations are to remind you that at any moment you could die, and so you should never put off the important things in life. You should apologize to people you’ve wronged. You should forgive everyone who has wronged you. You should do things you love. You should pray to whatever you believe in. And most importantly, death meditation reminds you that you should fucking meditate.

I tried to hide from the cushion, from the meditation — but it found me. Thank god. Thank Frank. And thank me.