#electronic scrap

[osteochondraldefect]

IDENTITY DOGMATISM, THE IMAGE IS ALWAYS IN STYLE

[aqueousablution]

8 hours' worth is a normal amount of Mega Man Zero and ZX MP3s to have on your phone, right

[thinktankbigmt]

TRICK OR TREAT!!!!

(please don't poison me)

*Oh. Great. Uh… here you go, I guess? I don’t know. Happy Halloween.*

[magicclam]

Recently my son has gotten more interested in music. A month or two ago, I helped him research and buy a small headphone amplifier for his desktop PC setup.

However, in addition to the amp, he wanted a vacuum tube preamp since he's seen the one I have for my PC (you can see part of it in the last pic) and wanted a similar configuration. :)

So I set about gathering some parts I had on hand to put one together for him. He selected the wood for the case from my stash, and the white aesthetic to match the rest of his PC setup. I used 2 6C4 tubes because I had them and they seemed like a fun choice for this.

Most of the work came in constructing the enclosure. I used my chop saw to cut pieces to length, then resawed them on my bandsaw so they were thinner. I then glued up the wooden box with some support blocks to increase the strength and give me somewhere to mount the metal plate that will hold the parts.

I'd recently scored a bunch of aluminum and steel sheet, so I used one of the aluminum plates to mount all the parts. The thicker plate was really nice to work and drill and allowed me to chamfor the holes so the wires won't scrape. Then I painted it up and mounted in the components.

This project involved a lot of 3D printing as well, all the transformer covers and the capacitor brackets were printed on my FlashForge 3. Boiled Linseed Oil was used on the wood for a natural finish, and the power light enclosure is an old glass bottle that I 3D printed a diffusion cap for.

Overall I'm really happy with this project, and so is my son who's been using it constantly over the Thanksgiving break. :)

Stay tuned for more fun with tubes!

[gardenview-research-crew]

"...New Hope?" | S.T.T. AU

"Oh c'mon, Teagan, it isn't THAT bad-" Rodger tried to reason with her, but she kept persisting.

("NO! No more going on runs for atleast a few days!") She signed. "It's just a scratch, calm down." Rodger sighed. ("And a "scratch" is a BITE FROM ANOTHER TWISTED PEBBLE?!") Teagan signed again, this time with a much more serious expression on her face. '...." "Okay, maaybe you are right.." Rodger groaned, trying to hide any hint of annoyance in his voice. They needed to find the other mains, but the thing of concern is a BITE?!

He didn't wanna escalate the situation, so he had no other choice other than to rest on one of the beds in the medical room.

It was...surprisingly comfy? Maybe Glisten wasn't kidding when he said that he'd sleep on these all day.

He felt himself slowly getting more sleepy & sleepy, but-

BOOM!!

The sound made Teagan & Rodger jolt in surprise as they see a familiar craft toon infront of the doorway. Which was...

..Scraps.

She looked..excited, pretty much the opposite of her usual quiet & stand-offish self (unless she was with Goob).

("Goodness, Scraps, you could've knocked!") Teagan signed, a clear expression of annoyance on her face.

"Hehe, sorry! I just-...need to show you two something! Well....more like a few someONES!" The origami cat giggled.

"Wait, you & your team already found some of them?? How? Who? When-" Rodger asked, before Scraps dragged him & Teagan to Med Room #2.

After reaching to the 2nd Medical Room, they saw Sprout listen to Shelly's dinosaur facts, despite the occasional gargle from the ichor in her throat.

"Wha- HOW?! We tried to catch them so many times, yet most of them probably have injured u by now!" Rodger yelled.

"Well, it was kinda easy, really!" Scraps replied, before pulling out a torn net from her (imaginary) pocket.

"Me & Goob made a net made outta rubber bands & some spare rope from the rock climbing wall the kids' used to play at. It's pretty much broken now from Shelly's claws & Sprout managing to rip the net with one arm and such, but I dunno if we can use it for the oth-" Scraps explained, feeling unsure before Rodger cut her off.

"This is-...WONDERFUL! If that can catch these two, then imagine what you & Goob could make to handle the others." Rodger exclaimed, shaking Scraps a bit, before returning to his usual calm demeanor.

"*ahem* Anyways, how would you feel if you & Goob made some equipment for the others?" He asked, making Scraps even more unsure than before.

"Well...I dunno! I'm more of a "arts and crafts" kinda toon than a "hunt em' down" one!" Scraps gulped, fiddling with the paper cup of her tail, before Teagan put a hand on her shoulder.

("Sweetheart, you may think you're not good at it, but Me & Rodger believe than you & your brother would come up with something to catch them.) Teagan signed with her free hand, giving Scraps a bit more confidence for now.

"..Uhm, thanks.." Scraps gulped, her paper ears drooping as she looked to the side.

"Hmm...." Rodger pondered, trying to come up with something that can make Scraps feel better.

"Hey, how about you work with Boxten? With his knowledge of machines & you & Goob's crafting skills, I bet you three would come up with many good inventions!" Rodger said, making Scraps' ears perk up and her tail wagging a bit.

"Wait, that's not a bad idea, actually! Okay, I'll talk to Boxten if he's up for the job!" She smiled, running out of the room with Teagan & Rodger smiling at eachother as she left.

[MAIN RAMPAGE 4/??]

Shelly & Sprout are okay! They're available for questions now!

[the-alternate-realities]

[edelstahlviratiberica]

Do you have HMS-1 and HMS-2 Steel scrap?

EDELSTAHL VIRAT IBERICA is an emerging importer - exporter, supplier of tool steels, mold steels from various countries. We are also engaged in the trade of ferrous, alloy steel, etc., with a network of partners all over the world, we are able to quickly meet customer needs.

HMS-1, HMS-2, and ferrous scrap are terms commonly used in the scrap industry to classify and describe different types of steel and iron scrap. Here's what each of these terms means:

HMS-1 (Heavy Fusion Scrap 1):

HMS-1 is a designation for heavy, bulky scrap, composed primarily of wrought iron and steel.

It typically includes scrap metal from a variety of sources, such as demolished buildings, old machinery, and industrial equipment.

HMS-1 is relatively clean and free of excessive contaminants, making it suitable for recycling into new steel products.

It usually consists of thick and heavy items such as beams, pipes, and plates.

HMS-2 (heavy melt scrap 2):

HMS-2 is another scrap category, but it may contain a slightly higher percentage of contaminants compared to HMS-1.

Includes items such as smaller structural steel parts, miscellaneous steel parts, and lighter gauge materials.

While still suitable for recycling, HMS-2 may require further processing to remove impurities and contaminants before it can be used in steel production.

We are looking for all wholesale scrap metal manufacturers and suppliers such as HMS 1, HMS 2, ferrous scrap, electronic motor scrap and shredded scrap in Portugal…

Learn more: https://moldsteel.eu/recycling-products/

WhatsApp Chat: +351-920016150 E-mail: info@moldsteel.eu

[amber-machine-satan]

Trans metal!

I think we need more transgirl led hardcore and metal acts. I’ve listened to/listen to some but i want more fixings of proper harsh, aggressive music. It might be most trans women are too dog brained to even think about it but still. At this point i should just do a one women band thing and produce some music myself

[xiaofiaan]

crocheted for an hour and it quelled my anxiety to the brink of none i seriously believe everyone needs to go find a hobby that involves creation away from a screen or electronic device and calm down a little

[bazilisk]

Would listen to this

[bwabbitv3s]

Yes, he just “accidentally” made a super weapon very much like the one the hero’s evil nemesis that wants to kill them is making. Only his is done first and giving them a low stakes practice run of exactly the skills they need to stop the nemesis version. Which will be easy and not a surprise anymore.

~How it starts is an accident. Really the first time was a fluke that later spawned an idea.~

Danny trying to be retired from hero stuff in this new dimension, but getting the itch to still do something. You can only go so long without a good fight or spar. He just does not really want to go through the trouble of joining a meta gym with all the background checks needed to keep the dangerous people out.

Danny also does not want to admit to his family or friends that they were right and he does need to visit more often. Lastly he really can't lose the bet with Dan about how he could not last a year without becoming a hero again. He really does want to get a good aerospace career here and he is already part way through his first semester.

He ends up channeling his parents and makes his own sparing partner. Just one itty bitty robot to spar with. Nothing too serious just strong enough to get a good workout in his ghost form. He even made sure to put a emergency stop switch on it! The robot is great and getting really good at fighting with each improvement to the coding he has been tweaking after fights. It is just what he needs to burn off energy. Only the Fenton luck eventually strikes.

After one session Danny finishes sparing and turns back human before turning it off and into rest mode like normal. Robot does not compute that the opponent is still there and the spar has stopped. As the ghost signature of a super powered individual has dissipated. It had not been programed to fight humans as a precaution. The robot used to Danny turning intangible and means that the Opponent must be hiding to do a sneak attack. They must search out for them to keep the spar going! It quickly rushes off to search for where the opponent has gone.

Danny turns round to the robot gone. Along with a very obviously off its hinges door that he swore had been locked.

Danny: Oh no. Music station in background stops and a reporter starts speaking: This just in. A killer robot has started to tear apart the city! Danny: No. It can't be my robot they are a sparing robot not a killer robot! Must be another robot one of the villains set to hunt down the local hero. Reporter: The robot appears to be impervious to officers weapons who have tried stopping it.

Danny is able to catch up to the fight after the local hero has already been fighting for a while. Really he would have been there faster but he kept having to go around police cordons and avoid broken streets. Thank the Ancients that he did all those modification on his motorcycle. He arrives just in time to see the robot tanking hits from the hero and start shouting out directions of where the shut off is.

The reporters keeping track of the fight right away split off a camera to start filming the guy on the supped up bike that looks a lot like the robot. Who in a pleasant surprise instead of joining in the attack starts they instead start shouting out how to stop the robot.

Danny: I am so sorry! I don't know what went wrong. It has never gone looking for others to fight!

The robot throws the hero over their shoulder as they try to wrestle them into submission.

Danny: The emergency shut off it on the back shoulder! It is under the plating there.

The fight ends fairly quickly after that. Unfortunately the hero and accidental evil robot creator is just out of range to clearly hear on the mics. Only a few bits come through and the robot creator is still wearing their helmet making it a bit hard to read them.

Danny feels a bit down for the next week after the accidental evil robot event. He almost gives in and start the mountain of paperwork for the meta gym. Then a real killer robot start attacking the city and unlike his it does not pull any punches.

Out of town hero's get called in to rescue people it is that bad right off the bat. Well for the ten minutes until the hero is freed up by this and can fight the robot instead of save people. Then it is over within moments as they go straight into ripping off armour plates before seeming to find what they were looking for and smash something. Turns out yeah, most dangerous robots have some kind of emergency stop. Even the ones by crazy villains need something to stop it rampaging if it goes off too soon. They just put a plate over it so it can't be seen.

Maybe it does not need to stop making sparing robots. Just make sure that if they do get out when stopping them they can be useful test runs for hero's. Not that he plans on them breaking out again at all! Plus it would mean he can really experiment with some of the more crazy ideas he wanted to try fighting but was worried about.

Danny a Rogue in one of DC city, but not the "I'm gonna kill everyone cause' I HATE LIFE !!!" no, he's "Oops, call the hero I accidentaly made a superweapon that I cannot stop (for the third time this week) !"

The Super Hero doesn't know what to do with him and you cann see Danny cheereing from a stand while the hero is battling the thing in a désolation landscape

[anmoltraders]

Scrap Buyers in Bangalore / Scrap Dealer in Bangalore

Anmol Traders – Leading Scrap Dealer in Bangalore

Anmol Traders is a well-known, Scrap Dealer in Bangalore, specializing in the collection, recycling, and resale of various scrap materials. We work with materials like metals, plastics, paper, and e-waste, offering competitive prices and reliable service for both individuals and businesses.

Our Services

Scrap Collection – We provide a convenient scrap collection service from homes, offices, factories, and construction sites.

Recycling & Segregation – After collecting the scrap, we segregate and recycle it to maximize resource recovery and reduce waste.

Eco-friendly Disposal – For materials that cannot be recycled, we ensure responsible and environmentally safe disposal.

Materials We Deal With

Metal scrap: iron, aluminum, copper, and steel

Plastic scrap: bottles, containers, and other plastic products

Paper scrap: old newspapers, cartons, and office waste

E-waste: old electronics, computers, phones, and gadgets

Why Choose Us?

Competitive Prices – We offer fair market rates for all types of scrap.

Convenient Service – We provide a hassle-free scrap collection and disposal service.

Sustainability Focus – Our recycling efforts help reduce environmental impact and promote responsible waste management.

[koscoveewaste]

Electronic Waste and Refurbished Laptops with Koscove E Waste

Disposing of electronics improperly can lead to toxic substances polluting the environment and posing health risks. This is where Koscove E Waste steps in as one of the most reliable electronic scrap buyers in India, providing efficient and eco-friendly solutions.

[songforaname]

been doing research into zero frets on guitars and there's like no information on the one specific thing im looking for.

everything's about whether its helpful with string height but nothing about putting a little space between it and the nut to stick a piece of fabric there to cut down on string noise.

i know many guitars meant for tapping (such as touch guitars and fm guitars) supply fabric to stick behind the first fret, so logically a piece between a nut and a zero fret should also work, correct?

i may make a test version of this as my first attempt at a guitar neck build.

[mwrecycles]

In today's rapidly advancing scientific landscape, the proper disposal of lab equipment and medical machines has become a critical concern. In Singapore, the increasing volume of waste generated by laboratories necessitates a responsible approach to disposal. With regulations in place to protect the environment and public health, safe and eco-friendly disposal services have emerged as essential components of waste management.

[edelstahlviratiberica]

What is hms1 and hms2 scrap metal? What is the Scope of Scrap Metal Recycling in #Portugal and #Europe?

Scrap metal recycling is the process of collecting, sorting, processing, and selling scrap metal for reuse in various industries. #HMS1 and #HMS2 are types of heavy melting steel scrap that are widely traded and used for steel production.

HMS1 does not contain galvanized and blackened steel, whereas HMS2 does. They are usually sold as a blend of 80% HMS1 and 20% HMS2, or lower grade mixes.

The latest information about scrap metal recycling HMS1, HMS2 scope in Portugal and Europe are:

The scrap metal recycling market in Europe is expected to grow at a CAGR of 7.8% during the forecast period of 2020-2026, due to the increasing demand for steel products, the environmental benefits of recycling, and the government policies and regulations.

Portugal is one of the major scrap metal exporters in Europe: Mainly to Spain, Turkey, and India. In 2020, Portugal exported 1.2 million tonnes of scrap metal, worth 372 million euros3. One of the leading scrap metal recycling companies in Portugal is RVO, Lda (unidade 2), which is located in Olaia, Torres Novas.

The scrap metal recycling industry in Europe faces some challenges: Such as the fluctuation of the international scrap metal prices, the competition from other regions, the quality and quantity of the scrap metal supply, and the impact of the COVID-19 pandemic.

The scrap metal recycling industry in Europe needs to adopt more advanced technologies, improve the efficiency and safety of the recycling processes, and diversify the sources and markets of the scrap metal.

EDELSTAHL VIRAT IBERICA is an emerging importer - exporter, supplier of tool steel, mold steel from various countries. We are also involved in trading ferrous, alloy steel, etc., with a network of partners across the world, we are able to quickly respond to customer needs.

We are also looking for all manufacturers and wholesale suppliers of scrap metal such as #HMS1, #HMS2, ferrous scrap, electronic motor scrap and shredded scrap in #Portugal..

Learn more: https://www.moldsteel.eu/

Chat WhatsApp: +351-920016150 E-mail: info@moldsteel.eu