#because they fit the contours of the face and provide a decent seal around the mouth and nose

[betweendoctorsanddetectives]

In case anyone didn't know this regarding masking: advice about wearing an n95 or kn95 just depends on where you live and what is being sold where you live. The mask that meets US standards of air filtering is called the n95 and it is named that way because it filters 95% of airborne particles of a certain size. The kn95 refers to the Chinese standard. If you're in Europe then there's a different naming system which is FFP followed by a number which denotes the level of filtering. FFP2 can be seen as equivalent to the kn95 or n95 as the 95s filter 95% and the FFP2 filters 94%. Wherever you are you should look up the standards and naming conventions your country uses before buying masks. I faced some confusion after seeing guides online recommending n95 and then not being able to buy them because they aren't sold here unless imported !

[johnnguyen-us]

How to Choose the Right Swimming Goggles: Tips and Tricks

Opening your eyes under the water can be a difficult task, especially if you are a beginner. To make things easy, you need the best swimming goggles!

Aside from clarity of vision, swimming goggles also protect the eyes from irritation caused by chlorine and other chemicals in the water. It can also have a special coating for superior UV protection. It makes you more comfortable under the water while also enhancing your performance.

To fully enjoy these benefits, make sure that you know how to choose the right swimming goggles. If you have no idea how to do this, keep on reading and allow us to extend a helping hand.

How to Choose the Right Swimming Goggles: Tips and Tricks

Choosing the Right Swimming Goggles

Fit

Types of Goggles

Lens

Straps

Gaskets

Tips for Using Swimming Goggles

Put It on Properly

Prevent Goggles from Fogging Up

Pay Attention to Care and Maintenance

Conclusion

Choosing the Right Swimming Goggles

The options can be overwhelming. For the uninitiated, it is easy to be lured into low prices. If you want to make the right decision, however, go beyond the price. This section briefly talks about the most important things you need to consider.

Fit

One of the first things to consider is how the goggles fit. If it is too loose, it will fall off your face. Worse, water can get in your eyes. On the other hand, when the fit is too tight, you might end up compromising your comfort.

The fit of your goggles will depend on the seal that it creates around the eyes and not on the strap. It must follow the natural contour of the face to create a tight fit. In turn, this also creates a tight seal to keep water away from your eyes.

The most popular option for swimming goggles is one that is oval-shaped and has a silicone gasket. The latter is the one responsible for sealing.

You also have to consider the nose bridge of the goggles as you try to evaluate its fit. It should be made of a flexible material so that it can comfortably mold based on the shape of your nose or face.

It will also be good to conduct the leak-proof test to determine if the fit is right. Stick the goggles on your face without putting the strap on your head. Press firmly. The fit is right if the goggles stay on its place. If it falls, this is an indication that the size is not suitable for the user.

Types of Goggles

Via: Amazon.com

Be familiar with the types of goggles available and decide which one is most suitable for your needs.

Competition Goggles: It has a low profile and fits closely to the eye socket, which is also the one responsible for the reduction of drag. It is meant for racing. When used for everyday swimming, it will end up being uncomfortable.

Practice Goggles: With a less technical design compared to competition goggles, this is the ideal option for everyday use. It is built to offer the best in terms of comfort. It usually has a rubber gasket that creates a tight but comfortable seal around your eyes.

Recreational Goggles: If you are swimming for a short time, this affordable option for swimming goggles can do the job. If you are an occasional swimmer on a budget, this is a decent option for you.

Prescription Goggles: This is the best choice if you have vision problems and you need prescription lenses.

Swim Masks: This is the biggest of the options mentioned. This is not for regular swimming. Instead, it is designed for snorkeling and scuba diving.

Lens

The color of the lens is an important consideration as it directly impacts your clarity of vision. This is an important consideration especially for people who have vision problems. The following are the types of lenses available:

Clear Lenses: Designed to provide the best in terms of visibility, this is a great choice if you are swimming in low-light conditions.

Polarized Lenses: If glare protection is an important consideration, this is the right choice of lens for you. This is great for triathlons and swimming in open water.

Mirrored Lenses: It is effective for glare protection and reduction of brightness. If you participate in indoor swim races, this is a good choice.

Blue Lenses: If you are looking for an all-around lens that you can use for both indoor and outdoor swimming, this is a good pick.

Straps

Via: Amazon.com

Consider the material used in the strap. It should be flexible so that you can pull it off easily. The material should also demonstrate exceptional longevity. Most importantly, it is important to have an adjustable strap. This will allow you to customize the fit of the goggles depending on what you find to be the most comfortable.

Gaskets

The gaskets or sockets are important because they are the ones that create a tight seal around the eyes. If they are ineffective, water can get in, and this is sure to be uncomfortable.

The classic goggles are equipped with foam sockets. They are comfortable around the eyes and have no hard suction. They are gentle, making it the perfect option for people with sensitive skin.

Silicone is another popular material for the gasket of swim goggles. It is often injection-molded and known for being an incredibly soft material.

Tips for Using Swimming Goggles

To make the most out of your swimming goggles, take note of the tips mentioned below.

Put It on Properly

This is one of the secrets for maximizing the benefits of using swimming goggles. Start by positioning the lenses on your eye socket. Hold it using your one hand. Use the other hand to pull the strap to the back of your head. Readjust the lens properly. There should be even pressure and slight suction.

Prevent Goggles from Fogging Up

The easiest solution to this problem is to ensure the right fit. By creating a tight seal around the eyes, water and air won’t be able to enter. This prevents condensation, and hence, you can expect that the goggles will stay clear when you are swimming.

Pay Attention to Care and Maintenance

To extend the lifespan of the goggles, you must emphasize care and maintenance. Use the pouch that comes with the goggles to protect it from dust and dirt. Avoid touching or rubbing the lenses. Dry it out thoroughly before storage. Keep it out of the sun and a place where it can get moist.

Conclusion

Swimming goggles are must-haves when you are under the water. They make you comfortable, making it easier to unleash your best performance. Not all goggles, however, can deliver exceptional benefits. Be careful about what you choose. From the fit to the materials, consider the factors mentioned above

https://ift.tt/2EjxdkB from water sports https://ift.tt/2PpF2LP

[olivereliott]

Road tested: Gear from Urban Helmets, Pando and Saint

This week, we’re looking at a high-end pair of riding jeans, an entry-level helmet, and a stylish military-style jacket that sits in between. Let’s dive right in.

Urban Helmets BigBore helmet

The basics: Retro full-face design; removable visor; DOT approved; $189.95

We’re spoilt for choice when it comes to retro helmets, with plenty of options at both the high and low ends of the affordability scale. Urban Helmets’ BigBore full face helmet won’t cost you an arm and a leg—but its premium look suggests a much higher price tag.

The general vibe is classic race helmet, with a narrow eye port and a high jaw. It’s close to Biltwell Inc.’s popular Gringo, but with more curves, and with a couple of extra details.

The narrow mouth vent, and round vent holes across the top, are more than just a little reminiscent of Bell’s Bullitt. And the removable visor is much like the one on the Nexx XG100—attaching to the shell via elastic straps, with press studs.

Out the box, the BigBore looks and feels great. The gloss black finish I opted for is downright classy, with a slick chrome trim along the eye port and bottom. It’s finished off with nifty details like an Urban Helmets logo up top, and faux leather trim just below it and at the back.

There’s even some contouring on the side that serves no purpose, other than to reinforce the throwback race helmet vibe. Compliments abound whenever I wear it.

A few flaws reveal themselves under really close scrutiny though. The chrome trim on my helmet isn’t perfectly straight in at least one section, a bit of plastic on the mouth vent hasn’t been trimmed properly, and the small dot-shaped vents up top don’t sit 100 percent flush. (And they’re just for show, since they don’t actually seem to let any air in.)

Popping the BigBore on reveals a plush interior and a true-to-size fit. It’s comfy out the box without any pressure or friction points, and cinches down with a run of the mill double D-ring strap. The liner features an neat contrast-stitched diamond pattern, and there’s a spare set of cheek pads in the box.

With that high chin bar though, anyone with a longer face is going to have their chin either flush with, or sticking out, the bottom. That’s me, but it’s really down to your personal head shape. (I have the exact same problem with the Biltwell Gringo.)

I do have one big gripe with the BigBore though, and that’s its visor. When it’s ‘on,’ it actually seals pretty well, thanks to a strip of rubber that runs around the eye port. No helmet of this type’s going to block wind noise on the open road, but the visor does make it a touch quieter.

Here’s the rub: it’s impossible to get the visor on and off with one hand, and when it’s off, there’s no decent place to put it. It seems natural to push it up like a regular visor, but after just one ride of doing that, the ‘vents’ will scratch the daylights out of it. And at any sort of speed, the wind starts picking it up. What’s more, I regularly have to re-align the rubber trim on the visor itself, which has a habit of popping off.

Without the visor attached, your only option is a pair of shades, because no goggle’s going to fit into that narrow opening. Granted, most of those issues plague any visor system like this. But I reckon this is one feature that deserves a little more time on the drawing board.

That aside, when you weigh the BigBore’s attractiveness and general comfort against its relatively low price, it’s worth considering. [Buy]

Pando Moto M65 jacket

The basics: single-layer, military-style riding jacket; Knox CE-approved shoulder and elbow armor; EUR379.

Based in Lithuania, Pando Moto’s forté is designing extremely stylish gear. But does their gear actually function well too? I donned their new M65 jacket to find out.

As its name implies, the M65 is inspired by the classic military field coat—but with a few moto-specific features. It’s a traditionally longer, four-pocket design, made from 16 oz canvas woven with Dyneema (an ultra-strong fiber that adds abrasion resistance).

Camo isn’t usually my deal, but it’s subtle enough here that I actually like the aesthetic. And while the jacket isn’t overly heavy, it does have a great, robust feel to it.

It’s really well made too, with some really slick details in the mix. The collar and cuffs are lined with a plush, corduroy-like fabric, and both the collar closure and velcro cuff adjusters are made from really heavy duty nylon.

The cuffs even include triangular flaps that are held back by a velcro patch, and can be deployed to cover the gap between your gloves and jacket. They only work well up until a certain speed, when the wind just pushes them back into place.

Branding is virtually non-existent, and the small inner pocket and velcro strip above the breast pocket (for attaching your name to) are both nice touches. Minimalism reigns supreme; there’s just one layer to the M65, with no built-in or removable liner.

It ships with Knox elbow and shoulder armor, which is quick and easy to pop in and doesn’t add much bulk. There’s a pouch for a back protector, but the actual pad’s not included.

Given the styling, I was expecting the M65 to be an oversized affair, like a camo parka. But it’s cut a lot slimmer than it looks. I’m what you would call ‘cuddly,’ so I picked an XXL based on Pando’s size chart. It fits, but it’s a tight squeeze; if Pando made an XXXL, I’d get that instead.

It’s not a problem if you’re in decent shape—but if you’re on the cusp of two sizes, carrying a little extra padding or want a roomier fit, check the chart, then go one size up.

Despite the sizing, the M65 was supremely comfortable in the shoulder area. That’s because Pando have included a feature we see way too little of: bi-swing panels. (They’re basically gusseted shoulder blade sections, with elastic bits hidden inside the jacket to increase mobility.) They’ve also added adjustment tabs at the sides to cinch the jacket down.

I wish the M65 came with better press studs though. They’re small and fiddly, and tricky to use with gloves on. I’d also build in hand warmer pockets, and I’d ditch the drawstring along the bottom. (The brass clasps on it have a nasty habit of jingling against your fuel tank.) I’d love to see Pando address those niggles, and maybe cut the M65 a little roomier.

But even as it stands, the M65 might just become my go-to for ‘tweener seasons—both on and off the bike. Provided I lay off the pies, of course. [Buy]

Saint Model 2 armored jeans

The basics: single-layer Dyneema chassis, CE-approved knee and hip armor, AU$350.

I’m not ashamed to admit that I’ve been a long-time fan of Saint’s riding jeans. It’s true, they’re a bit on the pricey side—but their mix of style, comfort and protection is tough to beat.

The Model 2 is an upgrade on the Model 1 that I reviewed some time ago. It’s a subtle overhaul, but the differences are notable. The Model 2 still uses the same material; cotton woven with UHMWPE (basically, Dyneema).

If you want to run the numbers, Saint use 66 percent UHMWPE in high impact areas, and 10 percent in low impact areas. It’s a single layer construction that avoids the need for extra protective layers. And that means all-day comfort.

The cut is best described as a relaxed straight fit, similar to a good pair of work pants. I prefer slim, tapered jeans, but we all have different tastes—and the wider cut makes the Model 2s easier to slip over bulky boots.

I grabbed the same size as I would for any other denims, and the Saints fitted perfectly right off the bat. I wish Saint offered them in different lengths though; they only come in a 36 leg, which is long even for my six foot frame.

The Model 2 ships with CE level 1 knee armor, and level 2 hip armor. To keep things comfy, Saint have added accordion panels above the knees, and at the back, above the pockets. It’s a slightly different layout to the Model 1, but it cuts a much cleaner silhouette.

The knee pads slip into mesh pockets, with high and low settings. It’s not the best design I’ve seen—the armor tends to sit a little off to the side, and on really hot days the mesh eventually irritates my skin.

As for the hip pads, the pouches for those are made from the same hardy fabric as the regular pockets, which seems like a strange approach. A softer fabric in both areas would make a huge difference.

Admittedly, I’ve never been a huge fan of armored riding pants—even if they are safer. So having a pair on hand that can almost pass for regular denims in both look and feel, is a bonus. [Buy]

Images by Devin Paisley.