#Workerkit

[workerkit-blog]

Worker Caliburn Injection molded Magwell More stable for Caliburn ,and it will be available separately

[workerkit-blog]

Worker F10555 3D Printed No.204 Hurricane Magwell - Blue

Increase the capacity of the magazine,most worker mags could compatible with it except Worker 40-rounds mag

[workerkit-blog]

Worker F10555 Mega Bigshock Kit 

[workerkit-blog]

Worker F10555 AK-12 Kit for Nerf Stryfe 

[workerkit-blog]

 Worker Metal Mod for Nerf Zombie Slingfire Blaster

Worker 3D printered Barrel for Nerf Zombie Slingfire Blaster

Worker Metal Cheekpad

[workerkit-blog]

hahaha,some people help me tag him

[workerkit-blog]

New update version for Worker Holy Sword Blaster (Caliburn)

1.Strengthen print parts to prevent bolt breakage, 2.Easier to install 3.Can install 3 straight long screw rod or Install 6 short screw rod

[workerkit-blog]

Which Nerf Blasters should Choose in Nerfwar

IF you are play frequently in Nerfwar,we should play with which blaster,now we share our experience to you

Manual Operation Blaster 1. If you choose to take Nerf Retaliator blaster, then you need to change the metal small baffle, metal bolt sled, otherwise the two items must be demaged. However, it increases your cost and stuk darts in barrel when play it, and you will have to remove the stucked bullets every five minutes. 2. Choose other manual operation blasters such as Nerf N-Strike Elite Longshot CS-6, please consider the cost. 3,Nerf Prophecy, if your friends have large hand can't use it. 4, so the best choice for manual operation blasters are Nerf N-Strike Elite Strongarm Blaster, Nerf Zombie Strike Hammershot Blaster, Nerf N-Strike Elite Mega Magnus Blaster... and even Nerf N-Strike Mega Tri-Break.

Semi/Full-Auto Blaster is still the most popular. I. Exterior. 1, try to avoid 3D printers, especially the flash hider and iron sight. 2, do not have any red dot, battery life is short. 3. Use the cheapest Nerf Retaliator original buttstock.

4, use the cheapest  PLA silence, in order to protect the extended inner tube, even if you use aluminum alloy tube, it will be paralyzed. Do not make a slender, protruding inner tube that will be damaged. But without extending the inner tube, the bullets fly unstability.

II. internal structure 1, semi-automatic shooting mode, bullet usually stuck in barrel. And many people don't know the situation when it happen, so continue to press, the battery is overheated and scrapped. 2, the original Worker Nef 3s lithium battery will be burnt regardless of the N-strike Elite or STF, burning a mess. 3, changed to fully automatic, putter and flywheel must be powered by two sets of electricity, otherwise burned. 4, firstly press the power supply to accelerate and then press the trigger, but for many people just as difficult to learn a car. 5, 6, don't use Worker Nef metal flywheel , it will be easy to Loose, grinding the Worker Nef Flywheel cage, sound like a silver bell.

7, don't Worker Nef metal Flywheel cage, pay attention to the cost.

8, don't use three burst mode, or six flywheels, stuck darts make you crazy 9. The  Worker Nef motor selects under 3V turn-speed 11000-12000, otherwise burns. Under the 4s lipo, the coil is not hot for 30 seconds, and the battery is not hot. Under this premise, the torque is as large as possible, it's fine.

The motor must have a brand, preferably an iron back cover. Do not try  cheapest motor. Motor number is like xxxx/xx, the first two numbers xx  is the speed, do not try more than 30.

In summary, the most suitable choice is + Worker Nerf PLA Suppressor + Retaliator Buttstock + xsw full-auto+ two sets of batteries+ Nerf STF kit. Or Nerf N-Strike Elite Rapidstrike CS-18 Blaster whch is very troublesome to modify but the lower cost   - the principle of modification is the same as above.

[workerkit-blog]

Worker Nerf Caliburn Blaster

We think you would love this 3D printer blaster 

FPS: 229.64

Range:35m

Product Weight: 1516 g

the color of the 3D printers can be customized , compatible with long and short darts

The spring is 20kg

Here is the  Metal Parts Upgrade Kit 

[workerkit-blog]

Worker Hurricane Blaster

FPS:108 

Capacity: 6rd

Production Method:Injection molding

Product Weight: 292.9g

[workerkit-blog]

Worker F10555 Wasteland Ranger Blaster

Hi,every nerfers this is our new item,3D printed ,sci-fi and single shot pistol,suitable for nerf long darts