#Super Mb Pro M6
Explore tagged Tumblr posts
Text
How to Solve Super MB Pro M6 + SSD Network Problem
Super MB Pro M6+ V2022.12 WIN10 SSD is facing network connectivity issues, leading to the following error message: “Initialization of the diagnostic multiplexer is failed.”
Possible causes:
Interrupted connection between the diagnostic multiplexer and the diagnostic socket.
Interrupted connection between the diagnostic multiplexer and the diagnostic device.
Faulty power supply at the diagnostic socket (terminal 30 and (or) terminal 31).
When using SD connect, it is important to check the connection status via the toolkit.
Error messages such as “no connection to the SD connect can be established (749),” “no VCI found (701),” or “no SD connect selected or desired SD connect cannot be selected” may indicate network issues.
Solution:
To resolve the network problem, follow the steps below:
Select “Use the following IP address(S)” option.
Set the IP Address (I):172.29.127.113.
Set the Subnet mask (U):255.255.255.0.
By revising the IP address settings when connecting via the network, the MB Star Diagnostic Tool can establish the necessary connection.
By following these troubleshooting steps, users can address the network problem encountered with the Super MB Pro M6 + SSD and ensure proper functionality of the diagnostic multiplexer and SD connection.
0 notes
Text
How to Solve Super MB Pro M6 + SSD Network Problem
Super MB Pro M6+ V2022.12 WIN10 SSD is facing network connectivity issues, leading to the following error message: “Initialization of the diagnostic multiplexer is failed.”
Possible causes:
Interrupted connection between the diagnostic multiplexer and the diagnostic socket.
Interrupted connection between the diagnostic multiplexer and the diagnostic device.
Faulty power supply at the diagnostic socket (terminal 30 and (or) terminal 31).
When using SD connect, it is important to check the connection status via the toolkit.
Error messages such as “no connection to the SD connect can be established (749),” “no VCI found (701),” or “no SD connect selected or desired SD connect cannot be selected” may indicate network issues.
Solution:
To resolve the network problem, follow the steps below:
Select “Use the following IP address(S)” option.
Set the IP Address (I):172.29.127.113.
Set the Subnet mask (U):255.255.255.0.
By revising the IP address settings when connecting via the network, the MB Star Diagnostic Tool can establish the necessary connection.
By following these troubleshooting steps, users can address the network problem encountered with the Super MB Pro M6 + SSD and ensure proper functionality of the diagnostic multiplexer and SD connection.
0 notes
Text
Super MB Pro M6+ Wireless Star Diagnosis Tool with 2023-09 XENTRY SSD full set which ready to work
https://www.ebay.com/itm/126469793281?itmmeta=01J1WJSAFGK5MFQ050Q3CQV3E4&hash=item1d722fe601:g:RyAAAOSwgdFmOdPQ
0 notes
Text
2023 SUPER MB PRO M6+ for Benz Trucks Diagnoses Wireless Diagnosis Tool with OBD2 16pin Cable + USB Cable + 14pin Cable
#supermbpro #mbprom6 #mbm6forbenz #benzdiagnosis
WhatsApp:+8617773532862
0 notes
Text
Super MB Pro M6+ M6 Plus Diagnosis Tool + USB Cable + OBD2 16pin Cable
#supermbpro #mbprom6 #mbstarc6 #m6plusforbenz #sdconnectc4 #autodiagnostictools
wasap.my/+8615886576826
0 notes
Text
V2023.06 MB Software Xentry Update:100% Works on Win10 Pro 64 Bit
MB Software is updated to V2023.06 now. It’s compatible with MB SD C4, C4 Plus Doip, C5, Super MB Pro M6+/ M6, etc on Win10 Pro 64 bit. Only Xentry and DAS software version update, others are the same as the old version. It still covers W223 W206 W213 W167 Software License ZenZefi License for free (valid to Nov. 19th, 2025).
Reliable links to get Xentry DAS software at eobdtool.co.uk:
V2023.06 MB SD Connect Compact C4 C5 HDD:
https://www.eobdtool.co.uk/wholesale/latest-mb-sd-connect-c4-software.html V2023.06 MB SD Connect Compact C4 C5 SSD:
https://www.eobdtool.co.uk/wholesale/latest-mb-sd-connect-c4-software-SSD.html
V2023.06 Mercedes-Benz Software (Win10 X64 version):
Xentry/DAS: 2023.06
WIS: 2021.07
EPC: 2018.11
PL76: 2022.01
SDmedia offline: 2014.01
Starfinder 2022
Vediamo: 5.01.01
Vediamo Database 2019
DTS Monaco: 8.16.015 & 9.02 (V9.02 needs to be activated with extra cost)
Selit Service Literature: 1.4
SWFinder: 5.2
Xentry version:
Xentry Languages (23):
English, Bulgarian, Croatian, Czech, Danish, German, Greek, Spanish, Finnish, French, Hungarian, Italian, Japanese, Korean, Dutch, Polish, Portuguese, Romanian, Russian, Serbo- Croatian, Slovenian, Swedish, Turkish, Chinese
DAS:
WIS:
EPC:
Vediamo:
DTS:
HHTWIN language：
Support Benz Cars after Year 1989:
Passenger Car Support List:
A (177), A (176), A (169), A (168), GLB (247), B (247), B (242, 246), B (245), EQA (243), EQB (243), C (206), C (205), C (203), C (202), 190 (201), EQE SUV (294), EQE (295), CLE (236), E (238), E (214), E (213), E (212), E (211), E (210), E (207), 124 (124), EQS SUV (296), EQS (297), S (223), S (222), S (221), S (220), S (217), S/CL (140), S (126), CLA (174), CLA (118), CLA (117), CLK (209), CLK (208), X290 AMG, CLS (257), CLS (218), CLS (219), CL (216), CL (215), CL (140) SLK (172), SLK (171), SLK (170), SL (231), SL (230), SL (129), SL (107), SLS (197), M (166), M (164), M (163), G (463), G (461), G (460), GL (164), GLK (204), R (251)...
Van Support List:
MB 100 (631), T1, SprinterIII, SprinterII, SprinterI, Sprinter900, Citan, Vito (639), Vito (638), V (638), Viano (639), T2, Vario, Vaneo (414)…
Truck Support List:
Actros963/4, Actros2,3, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros, Atego Light, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK, Further model series…
Unimog Support List: U20, UGN, UHN
Bus Support List:
TRAVEGO, INTOURO, INTEGRO, CITARO, CAPACITY, CITO, TOURISMO, O350/O403, CONECTO, O404, O405-O408, Minibus, OC500, TOURO, TOURINO, MBC, MULITEGO, O500, O500/OH, OH, OH368, OF, OF384, LO, O400, FURTHER MODEL SERIES…
Super Sports Car Supported List:
SLR (199)
0 notes
Text
Super MB PRO M6 In-vehicle Benz W205 All Modules Diagnostic Test
Hey, come to meet again in cardiagtool official Blog channel.
Today, this article will help customers know exactly how to use Super MB PRO M6 auto diagnostic tool to perform In-vehicle Benz W205 All Modules Diagnostic Test.
SUPER MB PRO M6 diagnostic tool relieves the dependency on communication transmission cable during test, and greatly reduces restriction on testing distance. It adopts the framework concept of original C6 diagnostic tool, and is able to replace original MB Star C4. Durable and easy to carry.
This is how Super MB PRO M6 diagnostic tool looks like.
📷
You can connect it to PC via network cable or Wi-Fi.
We can see here is an indicator on the device.
📷
This is OBD port for main cable.
📷
This tool has same functions as SD C4, which mainly supports all-system diagnosis, online programming (An account is required), coding, new DOIP protocol Benz models, ECU upgrade, modification, etc.
Now we connect main cables to take a diagnostic test in car.
📷 📷
Detailed operation procedures:
Connected by Wi-Fi, open up Xentry app and select “Benz W205”.
After the car is identified, then the screen will notify the message of “The diagnosis application is being started...”
This part with square-sign marked will show how this process is being performed.
📷 📷 📷
Select “Initial Quick Test”, the data is being determined, please wait.
It will take about half of the minute.
📷
Here will display all modules of your car that are being diagnosed.
Select “Start quick test”
📷
The quick test is being performed...
There are 38 modules in this car that is being diagnosed. This process needs a little more patience.
📷
After the completion of the diagnosis, it will come to “Saving the quick test result”.
Now all modules have been scanned.
“√” means the module works well, no faults;
“F” means the module has a DTC.
We can press “+” to view details about ECU info or DTCs.
📷
Amazing JOB! This is how Super MB PRO M6 diagnostic scanner is being used for Benz W205 All Modules Diagnostic Test.
That's all. Thank you for sharing your time with us!
Don't forget to contact us at:
Email: [email protected] Skype: cardiag.co.uk Whatsapp: +86 15002705698
Or leave a message at https://www.cardiagtool.co.uk/
to tell us what suggestions or questions you have about our products.
Source:http://blog.cardiagtool.co.uk/super-mb-pro-m6-in-vehicle-benz-w205-all-modules-diagnostic-test/
0 notes
Video
youtube
Super MB PRO M6 Perform a Quick Test on Benz(An account is required)
More info:https://www.eobdtool.co.uk/wholesale/super-mb-pro-m6-full-package.html
0 notes
Text
Super MB Pro #M6 Multiplexer With Doip Function MB Pro M6 #Mercedes Benz Star Diagnostic Tool Full Package Work on Both Mercedes Cars and Trucks
Skype : [email protected]
Whatsapp : https://wa.me/message/FOIB45MTKXSHM1
0 notes
Text
Super MB Pro M6 #Doip Multiplexer Wifi MB Pro #M6 Mercedes Benz Star Diagnostic Tool Panasonic FZ G1 Laptop Installed Last Version Mercedes Benz #Xentry DAS Software Ready To Use
Skype :[email protected]
Whatsapp / Wechat : +86 14776192853
0 notes
Text
Super MB PRO M6+ Mercedes/BMW Configure Steps
To begin configuring SUPER MB PRO M6+ diagnostic tool for use with Mercedes-Benz and BMW vehicles, follow these steps:
1. Plug the M6+ into the power supply or connect the OBD to the test vehicle, and plug in the USB cable of the M6+.
2. Turn on the computer and plug in the computer USB cable.
3. Open the computer network configuration interface and find the Realtek USB FE Family Controller network
4. Click “Properties”–TCP/IPV4, and set the IP address as shown in the figure below.
5. Click “Advanced”, and add a group of network IP addresses as shown in the figure below.
6. Click “OK”. After the configuration is successful, the display is as follows.
7. For the same computer, if you replace a new M6+, you need to reset the IP address. After the setting is completed, the computer is successfully bound to the M6+ and there is no need to set the IP address again for wired and wireless Internet access.
8. You can test Mercedes-Benz normally.
9. BMW wireless BMWAiCode configuration
Connect to SUPER MB PRO M6+ DOIP-***,password：123456789， wirelessly, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash. The computer-side BMWAiCoder configuration is as follows:
10. BMW wired BMWAiCode configuration
Connect the USB cable, press and hold the M6+ switch button for 3S, and the M6+ host wired indicator light will flash. The computer-side BMWAiCoder configuration is as follows:
11. BMW wired and wireless E-Sys configuration
Connect to the M6+ DOIP-*** wirelessly, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash. On the computer side, select the following for direct connection. Wired is similar, no setup required.
12. BMW wired ISTA configuration
Connect the USB cable, press and hold the M6+ switch button for 3S, and the M6+ host wired indicator light will flash. The computer ISTA configuration is as follows:
13. BMW Wireless ISTA configuration
Connect to the M6+ DOIP-*** wirelessly, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash. The computer side is selected as follows:
The mobile phone BWM APP adopts wireless connection.
Connect to the M6+ DOIP-***, password: 123456789, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash.
These steps ensure the proper initial configuration of SUPER MB PRO M6+ for Mercedes and BMW vehicles, allowing for effective diagnostic capabilities.
0 notes
Text
Super MB PRO M6+ Mercedes/BMW Configure Steps
To begin configuring SUPER MB PRO M6+ diagnostic tool for use with Mercedes-Benz and BMW vehicles, follow these steps:
1. Plug the M6+ into the power supply or connect the OBD to the test vehicle, and plug in the USB cable of the M6+.
2. Turn on the computer and plug in the computer USB cable.
3. Open the computer network configuration interface and find the Realtek USB FE Family Controller network
4. Click “Properties”–TCP/IPV4, and set the IP address as shown in the figure below.
5. Click “Advanced”, and add a group of network IP addresses as shown in the figure below.
6. Click “OK”. After the configuration is successful, the display is as follows.
7. For the same computer, if you replace a new M6+, you need to reset the IP address. After the setting is completed, the computer is successfully bound to the M6+ and there is no need to set the IP address again for wired and wireless Internet access.
8. You can test Mercedes-Benz normally.
9. BMW wireless BMWAiCode configuration
Connect to SUPER MB PRO M6+ DOIP-***,password：123456789， wirelessly, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash. The computer-side BMWAiCoder configuration is as follows:
10. BMW wired BMWAiCode configuration
Connect the USB cable, press and hold the M6+ switch button for 3S, and the M6+ host wired indicator light will flash. The computer-side BMWAiCoder configuration is as follows:
11. BMW wired and wireless E-Sys configuration
Connect to the M6+ DOIP-*** wirelessly, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash. On the computer side, select the following for direct connection. Wired is similar, no setup required.
12. BMW wired ISTA configuration
Connect the USB cable, press and hold the M6+ switch button for 3S, and the M6+ host wired indicator light will flash. The computer ISTA configuration is as follows:
13. BMW Wireless ISTA configuration
Connect to the M6+ DOIP-*** wirelessly, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash. The computer side is selected as follows:
The mobile phone BWM APP adopts wireless connection.
Connect to the M6+ DOIP-***, password: 123456789, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash.
These steps ensure the proper initial configuration of SUPER MB PRO M6+ for Mercedes and BMW vehicles, allowing for effective diagnostic capabilities.
0 notes
Text
Super MB Pro M6+ Diagnostic Tool Full Package for Benz DOIP with T530 laptop ready to work and can support new vehicle https://www.ebay.com/itm/125932642560?hash=item1d522ba100:g:jdEAAOSwuE9kXz41
0 notes
Text
V2023.03 MB SD C4 C5 Xentry DAS (Win10 Pro 64 Bit): 100% Works
V2023.03 MB SD C4 C5 software (Xentry/ DAS) comes now! It newly adds W223 W206 W213 W167 Software License for free (valid to August 10th), and adds DAS software shortcut icon on the desktop. It has been verified to work well with MB SD C4/ C4 Plus/ C5, OEM Benz C6, Super MB Pro M6 and M6+ on Win10 Pro 64 bit.
V2023.03 Mercedes-Benz Software Special Function Version (Win10 X64 version): Xentry/DAS: 2023.03 WIS 07.2021 EPC 11.2018 PL76 2022.01 WIS SDmedia offline 01.2014 Star Finder 2022 Vediamo 5.01.01 Vediamo Database 2019 DTS Monaco 8.16.015 & 9.02 (V9.02 needs to be activated with extra cost) Selit Service Literature: 1.4 SWFinder: 5.2
V2023.3 MB SD Connect Compact C4 C5 HDD: https://www.eobdtool.co.uk/wholesale/latest-mb-sd-connect-c4-software.html V2023.3 MB SD Connect Compact C4 C5 SSD: https://www.eobdtool.co.uk/wholesale/latest-mb-sd-connect-c4-software-SSD.html
0 notes
Text
SUPER MB PRO M6 Diagnostic User Guide: Two Different Configuration Versions
SUPER MB PRO M6 diagnostic tool, with the strong penetration of wireless test and WIFI signal, greatly reduces restriction on testing distance. It adopts the framework concept of original C6 diagnostic tool, thus able to replace original MB Star C4. Durable and easy to carry.
What highlight does it have?
Software Version: V2021.3
Perfectly replaces normal MB SD C4/C5
Supports Original Benz Dealer Diagnostic Software
Supports firmware update without installing the battery
Support Mercedes-Benz models, covering 12v car, 24v diesel truck & bus, MPV etc.
Check SUPER MB PRO M6’s distinctive features:
1.ABS+PVT plastic structure adoption has the advantages as follows:
1) Impact-proof & easy to carry
2) Lower consumption on product shell against wireless signal
3) Great advancement of wireless communication distance & stability
2.SUPER MB PRO M6 is the only diagnostic tool on the market that is highly consistent with the original MB Star C6:
1) Fully compatible with the original software.
2) You can directly upgrade the newest firmware without installing additional driver.
3.Can perform as the same functions as that of the original: Compatible with the Mercedes Benz models with protocol DOIP, K-line, CAN Low, Can High, LIN, RS485, etc, works with the old cars and new cars.
4.Built -in network interface prevents deformation and damage from impact.
5.Relieve the dependency on communication transmission cable during test, and greatly reduces restriction on testing distance. The device, adopts the framework concept of original C6 diagnostic tool, is able to replace original MB Star C4. Durable and easy to carry.
SUPER MB PRO M6 diagnostic tool has two different configuration version:
NO.1 SUPER MB PRO M6 wireless Star Diagnosis Tool Standard Version:
Item No. SP369-B, price: €287, free shipping, no tax
📷
Check purchase link here: https://www.cardiagtool.co.uk/super-mb-pro-m6-star-diagnosis-tool.html
What package you can get when receiving?
1pc x SUPER MB PRO M6 Main Unit 1pc x OBD2 16pin Cable 1pc x Lan cable NO.2 Super MB Pro M6 wireless Star Diagnosis Tool Support Doip Full Package Advanced Version:
Item No. SP369, price: €313, free shipping, no tax
📷
Check purchase link here:
https://www.cardiagtool.co.uk/super-mb-pro-m6.html
What package you can get when receiving?
1pc x SUPER MB PRO M6 Main Unit 1pc x OBDII 16PIN Cable 1pc x 38PIN Cable 1pc x 14PIN Cable 1pc x 8PIN Cable 1pc x Lan Cable
Good item, don’t miss it!
That's all. Thank you for sharing your time with us!
Don't forget to contact us at:
Email: [email protected] Skype: cardiag.co.uk Whatsapp: +86 15002705698
Or leave a message at https://www.cardiagtool.co.uk/
to tell us what suggestions or questions you have about our products.
Source:http://blog.cardiagtool.co.uk/super-mb-pro-m6-diagnostic-tool-review-two-different-packages/
0 notes
Text
2022.09 Benz #Xentry Das Super MB Pro #M6 Multiplexer With Doip Function MB Pro M6 #Mercedes Benz Star Diagnostic Tool Full Package Work on Both Mercedes Cars and Trucks
Skype :[email protected]
Whatsapp / Wechat : +86 14776192853
0 notes