#Scratch Protection Film for Rolex | Explore Tumblr posts and blogs

pkansa · 7 years ago

Text

Desk-diving marks on a clasp are the bane of existence for a watch owner. There’s an answer, and what it is will surprise you! (It took effort to write that awful a lede.)

I hate desk-diving marks on a clasp. I hate dings and scratches in a watch case. I hate little tiny dings in the edge of a crystal. All of these things are a normal part of watch ownership. I also hate the sound a metal watch clasp makes on the aluminum wrist-rest of a Mac laptop. I’ve regularly sat in meetings where people have taken off their wristwatches to type.

You can see the sort of wavy reflection the sticker adds to the bezel insert and crystal.

What’s a fella to do? The unthinkable, that’s what. I once had a CEO who noticed that I’d covered a MacBook Pro in a polyurethane film. He was shocked, exclaiming, “You’ve turned a perfectly good metal computer into a plastic one!”

And that’s what I’ve done here. I took the Ginault Ocean Rover and contacted Darren Keith, who sells polyurethane film protectors for watches on eBay. Keith has been a graphic artist for over 28 years, and cuts the film out of ZAGG Invisible Shield material. He can cut them for the crystal (with or without date cyclops), for a bezel insert, for the date cyclops itself, the sides of the watch, and for a clasp. Or anything else for that matter, on request.

I liked the Ginault very much, so I worked with Darren to get crystal, bezel, and clasp protectors made. The crystal and bezel insert were nearly the same as the Rolex it pays tribute to, but the clasps can vary pretty wildly from the original. It pays to measure and send Darren the numbers.

The clasp protector covers the center and sides of the main buckle. Other than picking up lint at the corners or a few persistent bubbles, it’s excellent.

Applying these is something I’ve been doing since about 2005, when ZAGG first came on the tech scene, making protectors for MacBooks and iPods. You wash your hands, spray them with a watery-soapy mixture, spray the device with same, peel the protective film from it’s backing and spray it, too. Having everything wet helps it slide into place before you squeegee the bubbles out and it adheres. When it comes to tech devices, it used to be a trick to heat the corners with a hair dryer to get the film to conform to compound rounded shapes like the side corner of an iPhone or laptop. Here, I didn’t heat the watch. The crystal protector went on easy and perfectly. The bezel insert protector has a triangle notch to accommodate the pearl at the 12 o’clock position. The triangle wasn’t quite wide enough to accommodate the Ginault pearl and lay flat at the point of the triangle notch. This could be because it’s a completely different watch than the Rolex it borrows influence from, and it could be because the 14060M has slightly different dimensions than it’s 16610LN counterpart, and the protectors were sized for the 16610LN model. In either case, Darren was more than willing to work with me, either accepting my measurements, or willing to have me ship the watch to him and have him measure and apply them perfectly. For the purposes of this review, he accepted my measurements and made them accordingly.

The shields also protect the side of the buckle

The clasp application consisted of three parts, the center part, and two sides that wrap around the sides of the clasp. The film was difficult to get to stick on the sides, and has shown that it may lift at its edges and collect pocket lint there. That’s an imperfect application, and worthy of ordering a second set to try and get a better stick, with perhaps less soapy water.

The crystal protector deserves another word. It’s easy to see the face through the plastic. The reflection off the top of the surface can show a bit of an orange-peel texture. Again, I’d rather have that then a chipped edge of a crystal, which is something you see in 2nd hand sales listings sometimes.

Here, you can barely see the added height of the stickers to the crystal and bezel insert. Look for their edges.

Does it feel weird to cover a metal watch in plastic? A little. Have other watch friends noticed the orange peel surface of the crystal protector reflected in the gloss dial? Yes, on close inspection. But I’d much rather have that than a ding or scratch in an expensive watch, or scratch other things like the laptop with the clasp of a metal bracelet. It works great, and I’ll be doing this to other watches. Darren’s prices are available at his eBay store

#gallery-0-6 { margin: auto; } #gallery-0-6 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-0-6 img { border: 2px solid #cfcfcf; } #gallery-0-6 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */

You can see the sort of wavy reflection the sticker adds to the bezel insert and crystal.

Here, you can barely see the added height of the stickers to the crystal and bezel insert. Look for their edges.

The shields also protect the side of the buckle

The clasp protector covers the center and sides of the main buckle. Other than picking up lint at the corners, it’s excellent.

From head on, you can’t really see any orange-peel texture

[amazon_link asins=’B005JVP0LE,B009KYJAJY’ template=’ProductCarousel’ store=’wristwatchrev-20′ marketplace=’US’ link_id=’449a3e98-56c3-11e7-8e0a-2b7522f5969d’][amazon_link asins=’B000JQFX1G’ template=’ProductCarousel’ store=’wristwatchrev-20′ marketplace=’US’ link_id=’5ad0958e-56c3-11e7-8e48-2b7106beb615′] [amazon_link asins=’B01LWNGDB6,B01AK5TQXG,B01AK5TQE0,B01AK5TQRM,B01AK5TQQ8′ template=’ProductCarousel’ store=’wristwatchrev-20′ marketplace=’US’ link_id=’9682df34-56c3-11e7-93ba-910bd0a7372c’]

Stickers! Or how to protect a wristwatch Desk-diving marks on a clasp are the bane of existence for a watch owner. There's an answer, and what it is will surprise you!

#crystal protector #shields #stickers #watch protectors #watchesofinstagram #wristwatchreview #wwr

0 notes

decaffeinatedlightluminary-blog · 7 years ago

Text

Rolex Submariner - Rolex Replicas

New Post has been published on http://rolexsubmariner.shop/rolex-submariner-rolex-replicas/

Rolex Submariner - Rolex Replicas

(adsbygoogle = window.adsbygoogle || []).push();

History of Rolex Submariner – Rolex Replicas

The Rolex Replicas Submariner Swiss Replica has a celebrated and long history. Its combination of unparalleled elegance and versatility appealed to James Bond fans. The Submariner first went into production in 1953 and officially launched the Rolex Replicas Submariner at the Basel watch fair. Neither Rolex Submariner models had the distinctive hands which are now associated with the Rolex watches. They both had straight style hands, and the appearance of the first Rolex Submariner diving watch is believed to be in a previous year. Over the following years, Rolex Replicas Submariner has received a lot of changes, and the James Bond films are credited with driving many of those changes.

In the first years,Rolex Replicas also produced a small number of the 6200-series Rolex Submariner watches. This was the first Rolex Submariner to make use of the new hands and also had an oversized winding crown. Within a few years, Rolex Replicas revised its Submariner line, producing models with different size crowns. By the early 60s, there were more models. All of these early Rolex Replicas Submariners used either gilt or gold printing on glossy black dials. Different types of paint would be used for the luminated markers. The next batch of Submariner watches, had even more significant change in their appearance, and the more popular Rolex Replicas designs surfaced. A number of new features were added to the case to provide protection for the movement. The oversized crown soon became a standard feature in all Rolex Submariner watches. Sometime in the early 1960s, Rolex discontinued the use of radium paint for the luminous indices, switching to the safer Tritium-infused paint. In 1965-1966, Rolex Replicas discontinued use of gilt/silver gilt dials on the Submariner watches, switching to white printing. A final important change came with the introduction of the 1680 model in the late 1960s.

In the 50s, the new Rolex Replicas Submariner model was available with a chronometer version of the Rolex movement. People believe that Sean Connery wore the 6538 as James Bond. So collectors regard that model as the only true James Bond Submariner. But other people believe all Rolex Replicas Submariners without crown guards deserved the same distinction because they weren’t introduced until 1958. In the 60s, the 1780 was the first Rolex Submariner to carry a date complication, marking the transition of the Rolex Submariner to a fashion accessory. Many divers continue to use Rolex Submariners in underwater environments. Over the next 50 years, the Rolex Replicas Submariner was updated with improved water resistance, new movements, and a number of other changes. But the modern Rolex Replicas Submariner bears little resemblance to the earlier versions, and is an obvious descendant of the very first Submariners.

Why Buy Rolex Submariner Swiss Replica Watches

Swiss Rolex Replicas Submariner watches are an extremely common style and is easily one of the most recognizable Rolex watches on the planet. The Rolex Submariner has appeared in countless James Bond movies, so most people will know what kind of watch it is. The black face, stainless steel Rolex Replicas Submariner is available everywhere, and people consider it to be a very ordinary watch – so having one won’t give itself away as a fake. Swiss Rolex Replicas Submariner are what many pro divers consider to be a tru diving watch. It has a uni-directional bezel that allows you to follow the immersion time and the bezel only rotates in one direction – counterclockwise. so the dive time can be shorter, but it avoids the danger of running out of oxygen while underwater. It also has a Rolex Replicas self-winding mechanism so the replica can run continuously. Even the slightest movement will wind the watch and stores the energy in a spring. This allows the watch to function with little or no movement for up to 3 or 4 days. At night, the Rolex Replicas date changes with a quick rotation, unlike cheaper replicas.

Specifications of Rolex Submariner Swiss Replica Watches

Genuine Swiss-made quality and manufacturing processes Swiss-made ETA 27-jewel automatic movement with sweeping second hand Laser engraved Rolex Replicas crown on the crystal at 6 o’clock Scratch-resistant sapphire crystal One-piece screw-down crown with water seal 2.5x magnification and Rolex date font 2-tone 18k solid gold Oyster band Rolex Replicas Solid stainless steel premium grade 904L Oyster band – resists corrosion All-gold 18k triple-wrapped gold band Variety of dials: blue, black, white, and special gold and silver Serti editions Special edition 25th anniversary green face Water-resistant to 30m with rubber seals around the crown and back of the watch Exact weight and feel of a genuine Rolex Replicas Submariner Serial numbers engraved between the lugs, hidden by the band Solid forged construction from one piece of metal Large screws holding together the bands Rolex Replicas Triplock system, featuring a triple gasket system to provide several layers of protection There are no longer hologram stickers on the back of the watches, so look for a solid back

When to Choose Rolex Submariner – Rolex Replica

Rolex Replicas Submariner Swiss Replicas are perfect for guys who want a casual yet classy watch. This includes businessmen, investment bankers, lawyers and other professionals who want to stay active. Many professionals don’t want to own a watch which is too formal or dressy. In addition, many people don’t work in an environment where they need to wear a dress watch to work. The Rolex Replicas Submariner Swiss Replica is extremely versatile and as such, it fits in a variety of situations.

Also, younger men looking for a cheaper, entry level Swiss Rolex Replicas watch should choose the Submariner because it is much more believable. A genuine Rolex Submariner does not cost as much as other Rolex watches. There is usually little gold or diamonds, compared to Presidential or Datejust models. If you are looking for a Swiss Rolex replica that is believable, and you aren’t middle-aged nor rich, Rolex Replicas Submariners are a watch that anyone can afford. They have a simple, yet elegant design, and it is not easy to spot the differences between a genuine Rolex Submariner watch and a Swiss Rolex replica.

Photos and Images of Rolex Submariner – Rolex Replicas

(adsbygoogle = window.adsbygoogle || []).push(); Source by Amazing Rolex

0 notes

ffinewatchcare · 1 year ago

Text

Tools Used During Watch Servicing

The Kapton Polymide Valeting Tape 12 mm is used by professionals in watch servicing. They are ideal for use on Rolex watches as the tape size of 12 mm fits the Rolex bracelets. The tape is known to have high levels of endurance and resistance properties. The Kapton tape is an adhesive tape that can withstand high temperatures. The tape is coated with a clear silicon adhesive on one side which is pressure sensitive. This product has the Dupont trademark. It comes in different sizes like 3 mm, 6mm, 9 mm, 12 mm, 19mm and 25mm. The tape comes in a roll which is 33 metres long. The tape technology is based on the Kapton film. Apart from rolls, Kapton spots are also available. They come in 4, 6, 9 and 12 mm diameters and each package contains 1000 spots.

The Kapton tape used in watch servicing is stable over a wide temperature range from -8 degrees Celsius to +370 degrees Celsius. This tape is basically an insulation tape which can be used in extreme temperatures. During the valeting process in watch service, the resistance to friction and temperature properties of this tape are found to be immensely useful. The tape is simply cut to shape and added on to the area to be protected during valeting. If spots are used, there is no need to cut; just use the spots to cover areas to be protected. The tape or Rolex Watch Protective Film spot is also resistant to water, salt water, fungi, bacteria and acids.

The Robur Bufflex Wheel is a popular buffing wheel that provides a satin finish. It is ideal for use on all metal types. The fine satin Bufflex wheel is used by jewellers as well as watchmakers through out the world. It produces a satin smooth finish that is comparable to a factory finish on watch cases and bracelets. It is made in France and it has a 100 mm by 25 mm dimension. The centre piece is stitched with leather securely and it has three sections for a thoroughly effective multi surface polishing.

Latex finger Cots and Protectors are used to protect fingers when servicing watches. They are supplied in boxes containing 144 pieces. It comes with an easy dispenser and is available in four different sizes to fit all fingers. They can be used during watch service activities like valeting, applying oils and cleaning solutions to keep the fingers safe and clean. They are tough and have anti static property. They do not contain powder and have textured tips to provide more sensitivity while working. They are pink in colour to merge with the skin colour and can be rolled with the rim to fit easily.

#Rolex Watch Protective Film #Rolex Watch Protector #Protective Film for Rolex #Rolex Protection Film #Scratch Protection Film for Rolex #Rolex Film Protector #Rolex Scratch Protector Film #+Rolex Protective film

0 notes