#Samsung SM-A305F Combination Firmware

[samsungfirmwares]

Samsung A30 SM-A305F Combination Firmware File ROM (All Version)

Here you can download the Official Samsung Galaxy A30 SM-A305F Combination Firmware File ROM with the latest Factory Binary U2, U1, U3, U4, U5, U6, U7 versions. If you want to repair your mobile or want to bypass FRP lock by flashing Combination FRP file on your phone, then first you have to download the same binary version Samsung SM-A305F Combination file from below. The Samsung Galaxy A30…

[pakfirmware]

Samsung A30 SM-A305F ENG Boot File

Samsung A30 SM-A305F ENG Boot File

Download Samsung A30 SM-A305F ENG Boot File, Flash A305FDDU1ASB3 boot.img file and bypass frp lock, fix device dead boot.

Easily Samsung FRP Bypass Samsung Galaxy A30 with this small combination file or change boot logo, enable device adb by using Odin or Samsung FRP Tool

Samsung A30 SM-A305F ENG Boot File

Device: A30

Model: SM-A305F

Brand: Samsung

Version: A305FDDU1ASB3

OS: 

File Type: ENG Boot

[bobgames]

Galaxy M20 (SM-M205G)

  Android 8.1 (Oreo) Exynos 7904 (14 nm) , Dual Camera 13 MP, 5 MP (ultrawide) , 64 GB, 4 GB RAM or 32 GB, 3 GB RAM , 5000 mAh battery,Fast battery charging 15W.

Download the Official and latest firmware update for Samsung Galaxy M20 (SM-M205G).

 What Is Firmware Exactly ?

Firmware is the software of your cell phone that operates the system, it responsible for running the Games, Apps and the function of the whole system. when we need to install the firmware? this question has a wide range of answer, but we can summary the answer in the next points : -Mainly, Updating to next android generation. -When the device is out of date. -when the device is lagging. -when the device is out of storage. -when you lost the Network by installing the wrong Firmware on your device. (But this not work by Stock Rom this done by Combination Rom)

 Firmware details for Galaxy M20 (SM-M205G)SM-A305F

Device Name 

    Model No.

Version

Notes

Galaxy M20

  SM-M205G

 oreo 8.1

None

Before downloading the firmware, please make sure that your mobile model is exactly the same as Galaxy M20 (SM-M205G).

  Required files, data and download the firmware  for Samsung Galaxy M20 (SM-M205G)

•  USB drivers for Galaxy M20 (SM-M205G) « Link » •  Firmware update file for SM-M205G «Google Drive» «One Drive» •  Odin software latest version to install Galaxy M20 (SM-M205G) firmware update « Link »

-Report broken link or an update

-Also, Read [SM-S260DL Official and latest firmware update for Samsung Galaxy J2 Android 8.0  ]

 How to Install Samsung Galaxy M20 firmware update correctly (step-by-step)

[Pre-Installation]

Step-1: After downloading the correct firmware form the likes above, charge your Galaxy M20 (SM-M205G) at least 30%. Step-2: Make sure that you have installed Samsung USB drivers (How to install Samsung USB Drivers) Step-3: Download Odin (Software that will be used to install the firmware update for Galaxy M20 (SM-M205G) Step-4: Extract The .ZIP file you have downloaded before, after the extraction you will find a file with format .tar.md5 as the image below.

Step-5: Extract Odin that you have downloaded before and open it.

[Section 1]

Step-1 Enable USB Debugging and OEM Unlock; in your Galaxy M20 phone Go to Settings > Developer options. V.I.Step

-To show up developer options, Go to about > build number, click on the “Build Number” about 10 times. 

Step-2: Power off your Galaxy M20 (SM-M205G).

Step-3: After a min, boot into downloading mode in your Galaxy M20 phone.

Old Samsung phones: press and hold Power + Home + Volume down for about 5 seconds.

New Samsung phones: press and hold Power + Bixby + Volume down for about 5 seconds.

Step-4: After the previous step, you will find this screen, just press Volume up to continue.

Step-5: Connect your cell phone into your PC with the included USB cable Step-6: After downloading USB drivers, Odin, firmware file, as we have mentioned before in section Pre-Installation, and plugging the cell phone into your pc, Odin will recognize your mobile phone and show Added message like the image below.

Step-7: Click on PDA (AP) bottom and select .tar.md5 file you have downloaded and extracted in step-4, in section pre-installation.

Step-8: Just click start.

V.I Note Do not never turn off your pc while installing the Rom, or unplug the USB cable form the device.

Step-9: After finishing flashing, you will get a Green Message in the left corner telling you "pass", congratulation ! you have installed your ROM.

-Also, Read [SM-S260DL Official and latest firmware update for Samsung Galaxy J2 Android 8.0  ]

[Post-Installation]

After installing the firmware update successfully, you should make a Format Reset to your device, to ensure removing and wiping the remaining unnecessary date, cash.

Now let's do this.

Step-1: Power off your Galaxy M20 cell phone.

Step-2: Boot into Recovery mode by pressing and holding Volume Down + Home bottom + Power bottom together for about 5 sec 

Step-3: Now select Wipe data/Factory reset

  Step-3: Then select Wipe cash partition

Step-4: Once you have cleared the Cash, Data Just Reboot system now

[Important notes]

PDA has no importance at all, so you can download any firmware for your phone as long as your mobile model is exactly the same as Galaxy M20.

The region is not important for you, you can flash your phone with any firmware's region.

This is the latest and official firmware update form Samsung.

[Frequently Asked Questions(FAQ)]

(Q)/can I flash my mobile with other countries' firmware? (A)/yes, of course, but you have to make sure that your model is exactly the same (Q)/how can I get my model number? (A)/go to settings/about device....you will see your model number.

(Q)/will I lose OTA updates (air updates)?

(A)/no, you will be able yo update your phone via OTA.

[bobgames]

Download the Official and latest firmware update for Samsung * (*).

● What Is Firmware Exactly?

Firmware is the software of your cell phone that operates the system, it responsible for running the Games, Apps and the function of the whole system. when we need to install the firmware? this question has a wide range of answer, but we can summary the answer in the next points : -Mainly, Updating to next android generation. -When the device is out of date. -when the device is lagging. -when the device is out of storage. -when you lost the Network by installing the wrong Firmware on your device. (But this not work by Stock Rom this done by Combination Rom)

● Firmware details for * (*)SM-A305F

Device Name

Model No.

Version

Notes

*

*

*

None

Before downloading the firmware, please make sure that your mobile model is exactly the same as * (*).

● Required files, data and download the firmware  for * (*)

•  USB drivers for * (*) «Download Link» •  Firmware update file for * model * «Google Drive » «One Drive» «AndroidFileHost» «Google Drive2» «Mshare»

•  Odin software latest version to install * (*) firmware update «Download Link»

- Report broken link or an update

-Also, Read [ * ]

● How to Install Samsung * firmware update correctly (step-by-step)

[Pre-Installation]

Step-1: After downloading the correct firmware form the likes above, charge your * (*) at least 30%. Step-2: Make sure that you have installed Samsung USB drivers (How to install Samsung USB Drivers) Step-3: Download Odin (Software that will be used to install the firmware update for * (*)) Step-4: Extract The .ZIP file you have downloaded before, after the extraction you will find a file with format .tar.md5 as the image below.

Step-5: Extract Odin that you have downloaded before and open it.

[Section 1]

Step-1 Enable USB Debugging and OEM Unlock; in your * phone Go to Settings > Developer options. V.I.Step

-To show up developer options, Go to about > build number, click on the “Build Number” about 10 times. 

Step-2: Power off your * (*).

Step-3: After a min, boot into downloading mode in your * phone.

*Old Samsung phones: press and hold Power + Home + Volume down for about 5 seconds.

*New Samsung phones: press and hold Power + Bixby + Volume down for about 5 seconds.

Step-4: After the previous step, you will find this screen, just press Volume up to continue.

Step-5: Connect your cell phone into your PC with the included USB cable Step-6: After downloading USB drivers, Odin, firmware file, as we have mentioned before in section Pre-Installation, and plugging the cell phone into your pc, Odin will recognize your mobile phone and show Added message like the image below.

Step-7: Click on PDA (AP) bottom and select .tar.md5 file you have downloaded and extracted in step-4, in section pre-installation.

Step-8: Just click start.

V.I Note Do not never turn off your pc while installing the Rom, or unplug the USB cable form the device.

Step-9: After finishing flashing, you will get a Green Message in the left corner telling you "pass", congratulation ! you have installed your ROM.

-Also, Read [ * ]

[Post-Installation]

After installing the firmware update successfully, you should make a Format Reset to your device, to ensure removing and wiping the remaining unnecessary date, cash.

Now let's do this.

Step-1: Power off your * cell phone.

Step-2: Boot into Recovery mode by pressing and holding Volume Down + Home bottom + Power bottom together for about 5 sec 

Step-3: Now select Wipe data/Factory reset

  Step-3: Then select Wipe cash partition

Step-4: Once you have cleared the Cash, Data Just Reboot system now

[Important notes]

PDA has no importance at all, so you can download any firmware for your phone as long as your mobile model is exactly the same as *.

The region is not important for you, you can flash your phone with any firmware's region.

This is the latest and official firmware update form Samsung.

[Frequently Asked Questions(FAQ)]

(Q)/can I flash my mobile with other countries' firmware? (A)/yes, of course, but you have to make sure that your model is exactly the same (Q)/how can I get my model number? (A)/go to settings/about device....you will see your model number.

(Q)/will I lose OTA updates (air updates)?

(A)/no, you will be able yo update your phone via OTA.

[bobgames]

Samsung Galaxy A30 (SM-A305F)

The new cell phone from Samsung-:It comes with

Ram: 8/6 GB

Storage: 128/256GB

CPU: Octa-Core Chipset

Resolution: 1080/2280

Screen: 5.8 Inches

OS: Android Pie

Download the Official and latest firmware update for Samsung Galaxy S10e (SM-g970F).

● What Is Firmware Exactly?

Firmware is the software of your cell phone that operates the system, it responsible for running the Games, Apps and the function of the whole system. when we need to install the firmware? this question has a wide range of answer, but we can summary the answer in the next points : -Mainly, Updating to next android generation. -When the device is out of date. -when the device is lagging. -when the device is out of storage. -when you lost the Network by installing the wrong Firmware on your device. (But this not work by Stock Rom this done by Combination Rom)

● Firmware details for Samsung Galaxy S10e (SM-g970F)SM-A305F

Device Name

Model No.

Version

Notes

Samsung Galaxy S10e

SM-g970F

Android Pie 

None

Before downloading the firmware, please make sure that your mobile model is exactly the same as Samsung Galaxy S10e (SM-g970F).

● Required files, data and download the firmware  for Samsung Galaxy S10e (SM-g970F)

•  USB drivers for Samsung Galaxy S10e (SM-g970F) « Link » •  Firmware update file for Samsung Galaxy S10e model SM-g970F «Google Drive» «One Drive» «AndroidFileHost» «Mshare»

•  Odin software latest version to install Samsung Galaxy S10e (SM-g970F) firmware update « Link »

-Report broken link or an update

-Also, Read [ SM-G973F Official Firmware download for Samsung Galaxy S10 ]

● How to Install Samsung Galaxy S10e firmware update correctly (step-by-step)

[Pre-Installation]

Step-1: After downloading the correct firmware form the likes above, charge your Samsung Galaxy S10e (SM-g970F) at least 30%. Step-2: Make sure that you have installed Samsung USB drivers (How to install Samsung USB Drivers) Step-3: Download Odin (Software that will be used to install the firmware update for Samsung Galaxy S10e (SM-g970F)) Step-4: Extract The .ZIP file you have downloaded before, after the extraction you will find a file with format .tar.md5 as the image below.

Step-5: Extract Odin that you have downloaded before and open it.

[Section 1]

Step-1 Enable USB Debugging and OEM Unlock; in your Galaxy S10e phone Go to Settings > Developer options. V.I.Step

-To show up developer options, Go to about > build number, click on the “Build Number” about 10 times. 

Step-2: Power off your Samsung Galaxy S10e (SM-g970F).

Step-3: After a min, boot into downloading mode in your Samsung Galaxy S10e phone.

*Old Samsung phones: press and hold Power + Home + Volume down for about 5 seconds.

*New Samsung phones: press and hold Power + Bixby + Volume down for about 5 seconds.

Step-4: After the previous step, you will find this screen, just press Volume up to continue.

Step-5: Connect your cell phone into your PC with the included USB cable Step-6: After downloading USB drivers, Odin, firmware file, as we have mentioned before in section Pre-Installation, and plugging the cell phone into your pc, Odin will recognize your mobile phone and show Added message like the image below.

Step-7: Click on PDA (AP) bottom and select .tar.md5 file you have downloaded and extracted in step-4, in section pre-installation.

Step-8: Just click start.

V.I Note Do not never turn off your pc while installing the Rom, or unplug the USB cable form the device.

Step-9: After finishing flashing, you will get a Green Message in the left corner telling you "pass", congratulation ! you have installed your ROM.

-Also, Read [ SM-A305F Official Firmware download for Galaxy A30 ]

[Post-Installation]

After installing the firmware update successfully, you should make a Format Reset to your device, to ensure removing and wiping the remaining unnecessary date, cash.

Now let's do this.

Step-1: Power off your Samsung Galaxy S10e cell phone.

Step-2: Boot into Recovery mode by pressing and holding Volume Down + Home bottom + Power bottom together for about 5 sec 

Step-3: Now select Wipe data/Factory reset

  Step-3: Then select Wipe cash partition

Step-4: Once you have cleared the Cash, Data Just Reboot system now

[Important notes]

PDA has no importance at all, so you can download any firmware for your phone as long as your mobile model is exactly the same as SM-g970F.

The region is not important for you, you can flash your phone with any firmware's region.

This is the latest and official firmware update form Samsung.

[Frequently Asked Questions(FAQ)]

(Q)/can I flash my mobile with other countries' firmware? (A)/yes, of course, but you have to make sure that your model is exactly the same (Q)/how can I get my model number? (A)/go to settings/about device....you will see your model number.

(Q)/will I lose OTA updates (air updates)?

(A)/no, you will be able yo update your phone via OTA.

[bobgames]

8 MP Rear Camera/Video Recorder

Android 8.0 (Oreo)

5 MP Front Camera

4G LTE/Wi-Fi Connectivity

Expandable Storage/microSD Slot

Touch Screen

  Download the Official and latest firmware update for Samsung Samsung Galaxy J2 (SM-S260DL) (Tracfon).

 What Is Firmware Exactly?

Firmware is the software of your cell phone that operates the system, it responsible for running the Games, Apps and the function of the whole system. when we need to install the firmware? this question has a wide range of answer, but we can summary the answer in the next points : -Mainly, Updating to next android generation. -When the device is out of date. -when the device is lagging. -when the device is out of storage. -when you lost the Network by installing the wrong Firmware on your device. (But this not work by Stock Rom this done by Combination Rom)

 Firmware details for Samsung Galaxy ( SM-S260DL)SM-A305F

Device Name

     Model

  Version

Notes

Samsung Galaxy J2  

   SM-S260DL

Android 8.0 (Oreo)

Tracfon

Before downloading the firmware, please make sure that your mobile model is exactly the same as Samsung Galaxy J2 (SM-S260DL).

  Required files, data and download the firmware  for Samsung  Galaxy J2 (SM-S260DL)

•  USB drivers for Samsung Galaxy J2  (SM-S260DL) « Link » •  Firmware update file for SM-S260DL «Google Drive» «One Drive»

•  Odin software latest version to install Samsung Galaxy J2  (SM-S260DL) firmware update « Link »

-Report broken link or an update

-Also, Read [Samsung Galaxy J2 Download the Official and latest firmware update for Samsung Samsung Galaxy J2 (SM-S260DL) (Tracfon).]

 How to Install  Samsung Galaxy J2  firmware update correctly (step-by-step)

[Pre-Installation]

Step-1: After downloading the correct firmware form the likes above, charge your  Samsung Galaxy J2  (SM-S260DL) at least 30%. Step-2: Make sure that you have installed Samsung USB drivers (How to install Samsung USB Drivers) Step-3: Download Odin (Software that will be used to install the firmware update for Samsung Galaxy J2  (SM-S260DL) Step-4: Extract The .ZIP file you have downloaded before, after the extraction you will find a file with format .tar.md5 as the image below.

Step-5: Extract Odin that you have downloaded before and open it.

[Section 1]

Step-1 Enable USB Debugging and OEM Unlock; in your Samsung Galaxy J2 phone Go to Settings > Developer options. V.I.Step

-To show up developer options, Go to about > build number, click on the “Build Number” about 10 times. 

Step-2: Power off your Samsung Galaxy J2  (SM-S260DL).

Step-3: After a min, boot into downloading mode in your Samsung Galaxy J2  phone.

Old Samsung phones: press and hold Power + Home + Volume down for about 5 seconds.

New Samsung phones: press and hold Power + Bixby + Volume down for about 5 seconds.

Step-4: After the previous step, you will find this screen, just press Volume up to continue.

Step-5: Connect your cell phone into your PC with the included USB cable Step-6: After downloading USB drivers, Odin, firmware file, as we have mentioned before in section Pre-Installation, and plugging the cell phone into your pc, Odin will recognize your mobile phone and show Added message like the image below.

Step-7: Click on PDA (AP) bottom and select .tar.md5 file you have downloaded and extracted in step-4, in section pre-installation.

Step-8: Just click start.

V.I Note Do not never turn off your pc while installing the Rom, or unplug the USB cable form the device.

Step-9: After finishing flashing, you will get a Green Message in the left corner telling you "pass", congratulation ! you have installed your ROM.

-Also, Read [ Samsung Galaxy J2 Download the Official and latest firmware update for Samsung Samsung Galaxy J2 (SM-S260DL) (Tracfon).]

[Post-Installation]

After installing the firmware update successfully, you should make a Format Reset to your device, to ensure removing and wiping the remaining unnecessary date, cash.

Now let's do this.

Step-1: Power off your Samsung Galaxy J2 cell phone.

Step-2: Boot into Recovery mode by pressing and holding Volume Down + Home bottom + Power bottom together for about 5 sec 

Step-3: Now select Wipe data/Factory reset

  Step-3: Then select Wipe cash partition

Step-4: Once you have cleared the Cash, Data Just Reboot system now

[Important notes]

PDA has no importance at all, so you can download any firmware for your phone as long as your mobile model is exactly the same as Samsung Galaxy J2 .

The region is not important for you, you can flash your phone with any firmware's region.

This is the latest and official firmware update form Samsung.

[Frequently Asked Questions(FAQ)]

(Q)/can I flash my mobile with other countries' firmware? (A)/yes, of course, but you have to make sure that your model is exactly the same (Q)/how can I get my model number? (A)/go to settings/about device....you will see your model number.

(Q)/will I lose OTA updates (air updates)?

(A)/no, you will be able yo update your phone via OTA.

[bobgames]

Samsung Galaxy Fold (SM-F9000) , Android 9 Pie , Snapdragon 855 , 12G Ram , battery 4380 , 7.3 inches .  

Download the Official and latest firmware update for Samsung Samsung Galaxy Fold (SM-F9000).

 What Is Firmware Exactly?

Firmware is the software of your cell phone that operates the system, it responsible for running the Games, Apps and the function of the whole system. when we need to install the firmware? this question has a wide range of answer, but we can summary the answer in the next points : -Mainly, Updating to next android generation. -When the device is out of date. -when the device is lagging. -when the device is out of storage. -when you lost the Network by installing the wrong Firmware on your device. (But this not work by Stock Rom this done by Combination Rom)

 Firmware details for Samsung Galaxy Fold (SM-F9000)SM-A305F

Device Name    

Model No.  

  Version

     Notes

Samsung Galaxy Fold    

 SM-F9000   Android 9 Pie

None

Before downloading the firmware, please make sure that your mobile model is exactly the same as Samsung Galaxy Fold  (SM-F9000).

Required files, data and download the firmware  for Samsung Galaxy Fold (SM-F9000)

•  USB drivers for Samsung Galaxy Fold (SM-F9000) « Link » •  Firmware update file for SM-F9000 «Google Drive» «One Drive»

•  Odin software latest version to install Samsung Galaxy Fold (SM-F9000) firmware update « Link »

-Report broken link or an update

-Also, Read [ SM-F9000 Official and latest firmware update for Samsung Samsung Galaxy Fold Android 9 Pie ]

 How to Install Samsung Galaxy Fold firmware update correctly (step-by-step)

[Pre-Installation]

Step-1: After downloading the correct firmware form the likes above, charge your Samsung Galaxy Fold  (SM-F9000) at least 30%. Step-2: Make sure that you have installed Samsung USB drivers (How to install Samsung USB Drivers) Step-3: Download Odin (Software that will be used to install the firmware update for  Samsung Galaxy Fold (SM-F9000) Step-4: Extract The .ZIP file you have downloaded before, after the extraction you will find a file with format .tar.md5 as the image below.

Step-5: Extract Odin that you have downloaded before and open it.

[Section 1]

Step-1 Enable USB Debugging and OEM Unlock; in your  Samsung Galaxy Fold phone Go to Settings > Developer options. V.I.Step

-To show up developer options, Go to about > build number, click on the “Build Number” about 10 times. 

Step-2: Power off your Samsung Galaxy Fold (SM-F9000).

Step-3: After a min, boot into downloading mode in your  Samsung Galaxy Fold phone.

Old Samsung phones: press and hold Power + Home + Volume down for about 5 seconds.

New Samsung phones: press and hold Power + Bixby + Volume down for about 5 seconds.

Step-4: After the previous step, you will find this screen, just press Volume up to continue.

Step-5: Connect your cell phone into your PC with the included USB cable Step-6: After downloading USB drivers, Odin, firmware file, as we have mentioned before in section Pre-Installation, and plugging the cell phone into your pc, Odin will recognize your mobile phone and show Added message like the image below.

Step-7: Click on PDA (AP) bottom and select .tar.md5 file you have downloaded and extracted in step-4, in section pre-installation.

Step-8: Just click start.

V.I Note Do not never turn off your pc while installing the Rom, or unplug the USB cable form the device.

Step-9: After finishing flashing, you will get a Green Message in the left corner telling you "pass", congratulation ! you have installed your ROM.

-Also, Read [SM-F9000 Official and latest firmware update for Samsung Galaxy Fold Android 9 Pie]

[Post-Installation]

After installing the firmware update successfully, you should make a Format Reset to your device, to ensure removing and wiping the remaining unnecessary date, cash.

Now let's do this.

Step-1: Power off your  Samsung Galaxy Fold cell phone.

Step-2: Boot into Recovery mode by pressing and holding Volume Down + Home bottom + Power bottom together for about 5 sec 

Step-3: Now select Wipe data/Factory reset

  Step-3: Then select Wipe cash partition

Step-4: Once you have cleared the Cash, Data Just Reboot system now

[Important notes]

PDA has no importance at all, so you can download any firmware for your phone as long as your mobile model is exactly the same as  Samsung Galaxy Fold (SM-F9000)

The region is not important for you, you can flash your phone with any firmware's region.

This is the latest and official firmware update form Samsung.

[Frequently Asked Questions(FAQ)]

(Q)/can I flash my mobile with other countries' firmware? (A)/yes, of course, but you have to make sure that your model is exactly the same (Q)/how can I get my model number? (A)/go to settings/about device....you will see your model number.

(Q)/will I lose OTA updates (air updates)?

(A)/no, you will be able yo update your phone via OTA.

[pakfirmware]

Samsung A30 SM-A305F Combination ROM

Samsung A30 SM-A305F Combination ROM

Samsung Galaxy A30 SM-A305F Combination File. Download Samsung A30 FAC_FA90_A305FDDU1ASB3 Factory Combination File for remove FRP lock, Fix device DRK, custom binary blocked by frp lock, dead boot repair.

It will also help to read and test fully device equipment both Hardware and Software. By using Combination firmware easily activate Device ADB, OEM unlocks or the Device Factory reset.

Samsung…