#S5720-32C-HI-24S-AC

[hongtelecom-blog]

600 W AC Power Module for Huawei Fixed Switches

600 W AC Power Module for Huawei Fixed Switches

Huawei Campus Switch includes S1700, S2300, S2700, S3300, S3700, S5300, S5700, S600-E, S6300, S6700, S7700, S7900, S9300, S9300X, S9700, S12700 Series. In this article, HongTelecom will introduce the 600 W AC Power Module for Huawei Fixed Switches.

600 W AC Power Module Product Support

Table 1 lists the switch models supporting a 600 W AC power module.

Table 1 Product support for a 600 W AC…

[thunderlinkcom]

What’s the Feature Dependencies and Limitations When Link Aggregation of Huawei Switch (1)

Configuration Notes Before an Eth-Trunk Is Configured

Each Eth-Trunk supports a maximum of 8 member interfaces on other models and 32 member interfaces on the S5720HI, such as Huawei S5720-32C-HI-24S-AC

In V200R009 and later versions, you can run the assign trunk command on the S6720EI (Huawei S6720-30C-EI-24S-AC) and S6720S-EI (Huawei S6720S-26Q-EI-24S-AC) to set the maximum number of LAGs and the maximum number of member interfaces in each LAG, and run the display trunk configuration command to check the configuration.

Member interfaces cannot be configured with some services or static MAC address entries. For example, when an interface is added to an Eth-Trunk, the interface must use the default link type.

An Eth-Trunk cannot be added to another Eth-Trunk.

Member interfaces of an Eth-Trunk must use the same Ethernet type and rate.

Interfaces that use different Ethernet types and rates cannot join the same Eth-Trunk. For example, GE and FE interfaces cannot join the same Eth-Trunk, and GE electrical and optical interfaces can join the same Eth-Trunk. 

Both devices of the Eth-Trunk must use the same number of physical interfaces, interface rate, duplex mode, and flow control mode.

If an interface of the local device is added to an Eth-Trunk, an interface of the remote device directly connected to the interface of the local device must also be added to the Eth-Trunk so that the two ends can communicate.

Both devices of an Eth-Trunk must use the same link aggregation mode.

In V200R009 and later versions, the assign trunk command fails to be executed on the S6720EI (Huawei S6720-30C-EI-24S-AC) and S6720S-EI (Huawei S6720S-26Q-EI-24S-AC) I enabled with SVF and Eth-Trunk specifications can only use the default settings.

When the number of active interfaces falls below the lower threshold, the Eth-Trunk goes Down. This ensures that the Eth-Trunk has a minimum available bandwidth.

The preceding configuration notes are applicable to scenarios where switches are directly connected. In the following scenarios, there are other configuration notes in addition to the preceding ones.

More related:

How to manage Ethernet Interface of Huawei Switch

Huawei Low-end Switches Upgrade The APP System

Cisco-Router-IOS Configuration Backup And Recovery

[hongtelecom-blog]

350 W DC power module for Huawei Fixed Switches

350 W DC power module for Huawei Fixed Switches

Huawei Campus Switch includes S1700, S2300, S2700, S3300, S3700, S5300, S5700, S600-E, S6300, S6700, S7700, S7900, S9300, S9300X, S9700, S12700 Series. In this article, HongTelecom will introduce the 350 W DC power module for Huawei Fixed Switches.

350 W DC power module Product Support

Table 1 lists the switch models supporting a 350 W DC power module.

Table 1 Product for a 350 W DC power…

[hongtelecom-blog]

600 W AC Power Module for Huawei Fixed Switches

600 W AC Power Module for Huawei Fixed Switches

Huawei Campus Switch includes S1700, S2300, S2700, S3300, S3700, S5300, S5700, S600-E, S6300, S6700, S7700, S7900, S9300, S9300X, S9700, S12700 Series. In this article, HongTelecom will introduce the 600 W AC Power Module for Huawei Fixed Switches.

600 W AC Power Module Product Support

Table 1 lists the switch models supporting a 600 W AC power module.

Table 1 Product support for a 600 W AC…

[hongtelecom-blog]

350 W DC power module for Huawei Fixed Switches

350 W DC power module for Huawei Fixed Switches

Huawei Campus Switch includes S1700, S2300, S2700, S3300, S3700, S5300, S5700, S600-E, S6300, S6700, S7700, S7900, S9300, S9300X, S9700, S12700 Series. In this article, HongTelecom will introduce the 350 W DC power module for Huawei Fixed Switches.

350 W DC power module Product Support

Table 1 lists the switch models supporting a 350 W DC power module.

Table 1 Product for a 350 W DC power…

[hongtelecom-blog]

Huawei S5700 Series S5720-HI Switch

Product overview

Huawei S5720-HI series are advanced Gigabit Ethernet switches that provide rich agile features. The switches are developed based on Huawei Versatile Routing Platform (VRP), and use the fully programmable structure to implement software definition and service change on demand. With services and network convergence as the core, the switches provide the ubiquitous service function…

[hongtelecom-blog]

Huawei S5700-HI Series Switches

Product overview

The S5700-HI series (hereafter referred to as S5700-HI) are advanced gigabit Ethernet switches developed by Huawei, providing flexible gigabit access and 10G/40G uplink ports. Based on next-generation, high-performance hardware and Huawei Versatile Routing Platform (VRP), the S5700-HI provides excellent NetStream function, flexible Ethernet networking, comprehensive VPN tunneling…