#S5700-28C-EI-24S

[hongtelecom-blog]

Huawei S5700 Series Switches S5700-EI

The S5700-EI series gigabit enterprise switches (S5700-EI) are next-generation energy-saving switches developed by Huawei to meet the demand for high-bandwidth access and Ethernet multi-service aggregation. Based on the cutting-edge hardware and Huawei Versatile Routing Platform (VRP) software, the S5700-EI provides a large switching capacity and high-density GE ports to implement 10 Gbit/s…

[thunderlinkcom]

What Constraints on USB-based deployment of Huawei S5700 Series Switch

The file system format of the USB flash drive must be FAT32, and standard for the USB interface is USB2.0 (USB1.1 interface on the S5700LI). To ensure compatibility between USB flash drives and devices, use Huawei-certified USB flash drives to configure the Huawei devices. Table 2 lists the USB flash drives applicable to a switch.

Only one USB flash drive can be connected to a device.

In V200R005C00 and later versions, USB-based deployment using a smart_config.ini index file is supported, and this deployment mode is supported in a stack. The USB flash drive must be connected to the master switch of the stack. If it is connected to the standby switch or a slave switch, the USB-based deployment process will not start.

USB-based deployment using the usbload_config.txt index file can only be performed in a single switch, not a stack of multiple switches. In a stack of multiple switches, if the USB flash drive is connected to the standby switch or a slave switch, the USB-based deployment process will not start. If the USB flash drive is connected to the master switch, the USB indicator blinks red fast, indicating that the USB-based deployment fails. In this case, the switch records an error report including the following information: The usbload_config.txt index file cannot be used for USB deployment of a multi-member stack.

The S5710-X-LI, S5720SI, S5720S-SI, S6720EI, S6720S-EI, S5720EI and S5720HI series switches support only the smart_config.ini format.

The S5700S-28X-LI-AC, S5700S-52X-LI-AC, and S5700S-28P-PWR-LI-AC in the S5700S-LI series support only the smart_config.ini format.

Fields in an index file are restricted by the current system version. For example, if some fields in the index file are not supported by the current system version, these fields are invalid for an upgrade to a later version.

USB-based deployment is mutually exclusive with the SVF, web initial login mode and EasyDeploy functions.

More related:

S5700-28X-LI-24S-AC

S5701-28X-LI-AC

S5700-28C-EI-24S

[huaweidistributor]

How Do I Use the Web System to Log In to the Switch?

Before logging in to the switch S5700-28C-EI-24S through the web system, complete the following configurations:

1. Upload the web page file to the device through FTP or TFTP.

  2. Run the http server load file-name command to load the web page file.

  3. Enable the HTTP function and create a web user account.

[HUAWEI] http secure-server enable

[HUAWEI] http server enable

[HUAWEI] local-user admin password cipher admin

[HUAWEI] local-user admin service-type http

  4. Open the web browser on your PC, enter the management IP address of the switch, and press Enter to display the Login page. (Ensure that the PC and switch huawei have a reachable route to each other.) Enter the web user name, password, and verification code, and select a language for the web system, as shown in Figure 1.

Figure 1 Login page

[hongtelecom-blog]

170 W DC Power Module for Huawei Fixed Switches

170 W DC Power Module for Huawei Fixed Switches

Huawei Campus Switch includes S1700, S2300, S2700, S3300, S3700, S5300, S5700, S600-E, S6300, S6700, S7700, S7900, S9300, S9300X, S9700, S12700 Series. In this article, HongTelecom will introduce the 170 W DC Power Module for Huawei Fixed Switches.

170 W DC Power Module Product Support

Table 1 lists the switch models supporting a 170 W DC power module.

Table 1 Product support for a 170 W DC…

[hongtelecom-blog]

170 W AC Power Module for Huawei Fixed Switches

170 W AC Power Module for Huawei Fixed Switches

Huawei Campus Switch includes S1700, S2300, S2700, S3300, S3700, S5300, S5700, S600-E, S6300, S6700, S7700, S7900, S9300, S9300X, S9700, S12700 Series. In this article, HongTelecom will introduce the 170 W AC Power Module for Huawei Fixed Switches.

170 W AC Power Module Product Support

Table 1 lists the switch models supporting a 170 W AC power module.

Table 1 Product support for a 170 W AC…

[hongtelecom-blog]

170 W DC Power Module for Huawei Fixed Switches

170 W DC Power Module for Huawei Fixed Switches

Huawei Campus Switch includes S1700, S2300, S2700, S3300, S3700, S5300, S5700, S600-E, S6300, S6700, S7700, S7900, S9300, S9300X, S9700, S12700 Series. In this article, HongTelecom will introduce the 170 W DC Power Module for Huawei Fixed Switches.

170 W DC Power Module Product Support

Table 1 lists the switch models supporting a 170 W DC power module.

Table 1 Product support for a 170 W DC…

[hongtelecom-blog]

170 W AC Power Module for Huawei Fixed Switches

170 W AC Power Module for Huawei Fixed Switches

Huawei Campus Switch includes S1700, S2300, S2700, S3300, S3700, S5300, S5700, S600-E, S6300, S6700, S7700, S7900, S9300, S9300X, S9700, S12700 Series. In this article, HongTelecom will introduce the 170 W AC Power Module for Huawei Fixed Switches.

170 W AC Power Module Product Support

Table 1 lists the switch models supporting a 170 W AC power module.

Table 1 Product support for a 170 W AC…

[thunderlinkcom]

What Constraints on USB-based deployment of Huawei S5700 Switch

The file system format of the USB flash drive must be FAT32, and standard for the USB interface is USB2.0 (USB1.1 interface on the S5700LI). To ensure compatibility between USB flash drives and devices, use Huawei-certified USB flash drives to configure the Huawei devices. Table 2 lists the USB flash drives applicable to a switch.

Only one USB flash drive can be connected to a device.

In V200R005C00 and later versions, USB-based deployment using a smart_config.ini index file is supported, and this deployment mode is supported in a stack. The USB flash drive must be connected to the master switch of the stack. If it is connected to the standby switch or a slave switch, the USB-based deployment process will not start.

USB-based deployment using the usbload_config.txt index file can only be performed in a single switch, not a stack of multiple switches. In a stack of multiple switches, if the USB flash drive is connected to the standby switch or a slave switch, the USB-based deployment process will not start. If the USB flash drive is connected to the master switch, the USB indicator blinks red fast, indicating that the USB-based deployment fails. In this case, the switch records an error report including the following information: The usbload_config.txt index file cannot be used for USB deployment of a multi-member stack.

The S5710-X-LI, S5720SI, S5720S-SI, S6720EI, S6720S-EI, S5720EI and S5720HI series switches support only the smart_config.ini format.

The S5700S-28X-LI-AC, S5700S-52X-LI-AC, and S5700S-28P-PWR-LI-AC in the S5700S-LI series support only the smart_config.ini format.

Fields in an index file are restricted by the current system version. For example, if some fields in the index file are not supported by the current system version, these fields are invalid for an upgrade to a later version.

USB-based deployment is mutually exclusive with the SVF, web initial login mode and EasyDeploy functions.

More related:

S5700-28X-LI-24S-AC

S5701-28X-LI-AC

S5700-28C-EI-24S

[thunderlinkcom]

What’s the Feature Dependencies and Limitations When Link Aggregation of Huawei Switch (2)

Configuration Notes After an Eth-Trunk Is Configured

An Ethernet interface can be added to only one Eth-Trunk. To add an Ethernet interface to another Eth-Trunk, delete it from the original one first.

After an interface is added to an Eth-Trunk, only the Eth-Trunk learns MAC address entries or ARP entries, but the member interface does not.

Before deleting an Eth-Trunk, delete member interfaces from the Eth-Trunk.

Specifications

Link aggregation mode:

Manual

LACP

Link aggregation modes supported by the device

Intra-device: Member interfaces of an Eth-Trunk are located on the same device.

Inter-stack-device: Member interfaces of an Eth-Trunk are located on member devices of a stack. For details, see Link Aggregation in Stack Scenarios.

Inter-device: The inter-device link aggregation refers to E-Trunk. E-Trunk allows links between multiple devices to be aggregated based on LACP. For details, see E-Trunk.

Load balancing modes supported by the device

To prevent data packet mis-sequencing, an Eth-Trunk uses flow-based load balancing.

You can use the following load balancing modes based on actual networking:

Based on source MAC addresses of packets

Based on destination MAC addresses of packets

Based on source IP addresses of packets

Based on destination IP addresses of packets

Based on the Exclusive-Or result of source and destination MAC addresses of packets

Based on the Exclusive-Or result of source and destination IP addresses of packets

Enhanced load balancing: based on VLAN IDs and source physical interface numbers for Layer 2, IPv4, IPv6, and MPLS packets

More related:

What’s the Feature Dependencies and Limitations When Link Aggregation of Huawei Switch (1)

ARP Security Configuration Commands_part 1

ARP Security Configuration Commands_part 2

Huawei S5700-24TP-SI-AC

Huawei S5700-28C-EI-24S

Huawei S5700-28C-PWR-EI

[thunderlinkcom]

Application in Public Cloud

Agile Cloud Network is a suite of network solution based on Huawei public cloud. The Huawei S5720-SI / S5720S-SI (since V200R010C00) and Huawei S5720 LI (since V200R011C00) can be located at the access layer of the agile cloud network as a cloud box, as shown in Figure 2-4.

The cloud box is plug-and-play. It goes online after being powered on and connected with a network cable, without complicated configurations. A cloud box can connect to the cloud management platform and bidirectional certificate authentication is used to ensure management channel security. The cloud box provides the Netconf&YANG interface for the cloud management platform to deliver configurations remotely. In addition, remote maintenance and fault diagnosis can be performed on the cloud box through the cloud management platform.

More related:

Huawei S5700-28C-EI-24S-AC Switch

Huawei S5700-28C-EI Switch

Huawei S5700-26X-SI-12S-AC Switch

Application of the S5700 on a Small-scale Enterprise Campus Network

How to add an ONU to an OLT

How to configure a VDSL2 User Port?

[thunderlinkcom]

Application of the S5700 on a Small-scale Enterprise Campus Network

This section describes the application of the Huawei S5700 Switch on a small-scale enterprise campus network.

As core switches of a small-scale enterprise network shown in Figure 2-3, the S5700s have powerful aggregation and routing capabilities. S5700s use iStack to implement backup among multiple devices and ensure high reliability. The Huawei S5700 Switch provides various access control policies to achieve centralized management and simplify configuration.

Figure 2-3 Position of the Huawei S5700 Switch on a small-scale enterprise network.

Huawei S5700-28C-PWR-EI

Huawei S5700-28C-HI-24S

Huawei  S5700-28C-HI

More related:

Application of the S5700 on a Small- or Medium-scale Enterprise Campus Network

How to Set the Layer2 Isolation Status Parameters?

How to configure DHCP on OLT

[huaweidistributor]

How to configure WEB for S5700-28C-Ei-24S

How to configure WEB for S5700-28C-Ei-24S, below is the steps:

  1, in the user view with dir check the WEB file name.

2, Enter the view system (sys),

Loading WEB file, HTTP ser load Huawei S5700 S5700EI-V200R001C00.001.web.zip, enable the WEB service, HTTP ser en.

3, configuring the switch IP,

Int VLAN 1

IP add 192.168.1.1 24

4, configuring the WEB login user name and password

AAA

Local admin pass CI admin

Local admin ser http

Local admin PR l 15

Usr vty 04

Auth AAA

5, to the user view, save the configuration: save