#RustBusters

[lasercleaner]

Introducing Rust Busters, the ultimate solution for removing rust and corrosion from metal surfaces. With our state-of-the-art Laser Rust Removal Machine, you can easily and effectively remove rust without damaging the underlying material. Our laser rust remover uses advanced technology to target and eliminate rust at its source. The high-powered laser beam vaporizes rust, leaving behind a clean, smooth surface. Unlike traditional methods of rust removal, such as sandblasting or chemical treatments, our laser rust remover is non-abrasive and non-toxic, making it safe for use on a wide variety of surfaces.

[glowzymart08]

🛠️✨ Watch rust disappear like magic! Say goodbye to stubborn rust and hello to a smoother, cleaner surface with WD-40. Perfect for every DIY enthusiast! Get yours now at Glowzymart.

[candy-floss-crazy]

The engine out of our mini is in bits, spread around a number of specialist engine builders (MED and Southam Mini Centre), to be tuned up and the power output cranked up a bit. Although Jaspers restoration was meant to be a quick tidy up, its ended up becoming a complete makeover. The bodyshell is in the blasters to be stripped of paint. So we have turned our attention to the rear subframe, the first of the parts we are refurbing in house. It was a bit grotty to start with, but mainly surface rust so nothing to major to put right. The swing arms were blasted, coated with cold galvanizing spray then topcoated with a Rustbusters product. The bushes and bearings were changed, new pins fitted, Goodrich brake lines, alloy brake drums, and specialist components rear hub assemblies fitted, along with DSN retrosport alloy brake plates. Things like the handbrake quadrants are really for looks rather than performance, but hey if you are going to do it, might as well look the part. To finish the subframes we fitted alloy trunnions, adjustable swing arm brackets, and seam sealed the subframe to prevent water ingress. Once the subframes are fitted we have some Bilt Humber anti rust wax, but we don't want to coat the parts yet as it will make a mess fitting them. Read the full article

[caterjunes]

scraped off the old silicone. asked grayson to paint over the rusty bits bc i didn't want to rustbust. they rustbusted instead. i painted over the bare metal w/ some rustoleum enamel. now it's drying and the downstairs smells like paint so the extractor fan is roaring full blast. but it's happening at least. i even cleaned the paintbrush w/ mineral spirits.

removed our broken fucking sink faucet. took me half an hour, a lot of wrist pain, plus a tremendous amount of spiderwebs, rust flakes, mysterious grime, and water falling on my head. love it /s. now i need to scrape off the black ooze and shreds of old silicone, clean it all thoroughly, and figure out how the fuck to properly protect the holes from continuing to rust. then install the new faucet (had to drive 45 min each way this morning to get it). i hate this.

[lifetwogo]

Throughout the land, she shall be known as...Sage . . . #lifetwogo #vanlife #vanlifediaries #paintyourownvan #beforeandafter #vanpaintproject #sprinterdiy #sprintervandiy #rustbusters #dyiautopaint #thisisafirst #homeiswhereyouparkit #evenduringprojects #workinprogress #sprintervan #sprinterlife #sprinter #optoutside #liveoutdoors #vanlifeadventures #nomads #digitalnomads #travelers #fulltimers #explorers #adventurers #northernmichigan #jambound #thj2017 (at Michigan)

[corrosionconsultant]

Wonder X as a Penetrator and Lubricator | suprabha | Rust prevention

[tam--lin]

RUSTBUSTING FOR FIVE HOURS [ASMR]

[boisebetties]

...because Robie will be here before you know it! . . #hillsforbreakfast #bettieup #racetorobiecreek #robiecreek @race2robiecreek #rustbuster https://www.instagram.com/p/Bv75nRKgOWu/?utm_source=ig_tumblr_share&igshid=m3v8dmeuyfzx

[kvikk]

https://github.com/phra/rustbuster

[recoiloperated]

She got the floor loom for free because it was busted. Dad fixed it in 45 minutes with a thing of steel wool and Rustbuster. It's older then my mom.

And you probably know someone with a 3D printer, and could get them to make you the parts for a spool of filament and a few loafs of sour dough. Otherwise I can get you in touch with my sister, she runs a print farm and can make you parts for it for a pretty reasonable price. You'll need to build it, but she has links that'll show you how.

“I practice traditional femininity” OK show me your loom

[candy-floss-crazy]

The engine out of our mini is in bits, spread around a number of specialist engine builders (MED and Southam Mini Centre), to be tuned up and the power output cranked up a bit. Although Jaspers restoration was meant to be a quick tidy up, its ended up becoming a complete makeover. The bodyshell is in the blasters to be stripped of paint. So we have turned our attention to the rear subframe, the first of the parts we are refurbing in house. It was a bit grotty to start with, but mainly surface rust so nothing to major to put right. The swing arms were blasted, coated with cold galvanizing spray then topcoated with a Rustbusters product. The bushes and bearings were changed, new pins fitted, Goodrich brake lines, alloy brake drums, and specialist components rear hub assemblies fitted, along with DSN retrosport alloy brake plates. Things like the handbrake quadrants are really for looks rather than performance, but hey if you are going to do it, might as well look the part. To finish the subframes we fitted alloy trunnions, adjustable swing arm brackets, and seam sealed the subframe to prevent water ingress. Once the subframes are fitted we have some Bilt Humber anti rust wax, but we don't want to coat the parts yet as it will make a mess fitting them. Read the full article

[caterjunes]

grayson @5robins got me an eggbeater drill for christmas! i’ve spent the last couple days cleaning and rustbusting it, and then i painted it using nail polish

[lifetwogo]

New Treads ✅ But those rims need a bit of work... . . . #lifetwogo #babygotnewshoes #newtires #bfgko #vanpaintproject #sprinterdiy #sprintervandiy #rustbusters #dyiautopaint #homeiswhereyouparkit #evenduringprojects #sprintervan #sprinterlife #sprinter #optoutside #liveoutdoors #vanlifeadventures #nomads #digitalnomads #travelers #fulltimers #explorers #adventurers #northernmichigan #jambound #thj2017 (at Michigan)

[noxudolus]

Know How Rustproofing And Undercoating Is Done By Pros

Car is dear to all, but in order to make it well-maintained and appealing, we should put some efforts. Surely, you must go with the engine repair and maintenance, wash the car on regular basis and do other various possible things, but have you ever thought of car rust proofing? Well, if your mechanic didn’t tell you about the same, you should know that it is necessary in order to protect your car rust from corrosion and other various issues. As it is necessary to do so, you should concentrate on finding the best and experienced professional who must be known for high performance rust proofing and sound deadening materials. The professionals are not only known for their work, but they are the best for doing work in an authentic manner as well as using amazing tools. All work they carry on using standard and recommended quality assured method as well as customer will receive a declaration certificate at the end of the job. All you just go with the rustproofing and undercoating professionals and they will do everything for you, including- complete the underbody service on the same day and go with full inspection to suggest the best solutions to the people. It is important to note that all the vehicles require heavy steam cleaning rust removal and rust conversion; hence sometimes it will take more time and in very bad cases could be subject to a surcharge. Prices may differ from one source to other and it is decided by full inspection of the car, the client’s requirements and other various conditions. Hiring professionals means, they will do various things so that you can assure that you car is well-maintained and will run in the best possible manner. One can expect various services from them as follows- The price you will need to pay to the professionals will be for complete cleaning the underside of the car. Yes, professionals will handle all sorts of conditions and ensure to concentrate on complete and safe cleaning of your car under the side. Aside this, they move up with the removal of under trays and arch guards for proper functioning of the car. Everything they do via planned strategies to offer the best results to the people. Apart from this, one should expect the conversion of the rust in structural areas and later the rustbuster under body wax is applied for ultimate protection of your car. For complete car rust protection, pros never fail to go with the application of the rustbuster rust treating cavity wax and at last they replace plastic guards and trays, which help people to get their job done and now they can expect smooth and amazing functioning of the car. All these things are very important which most of the car owners neglect and later they get issues due to the same.

[bodyfeed]

EVO ACS M CB

EVO ACS M CB

The perfect low-maintenance bike for harsh environments

Alloy frame and fork

Alloy handlebar, stem, seatpost and cranks

Sealed headset, bottom bracket and pedals

KMC Rustbuster chain

Double-wall alloy rims with stainless steel spokes and aluminum hubs

Primary Color

Frame Size 18”

Wheel Diameter 26”

Color Silver