#Remove Bedliner

[blubushie]

So today, for a list of notes/shit I've gotta do to this ute to make it functional:

Tray rust: confirmed simple surface rust. Sandblast the rust off then put down bedliner.

Whatever dipshit painted the deep blue on there painted over the bevel. Gotta strip that off.

It has tow plug.

It has 1 original key, 1 spare, and 1 petrol key.

Manual choke.

Heater core needs to be flushed the bloke thinks. Might need replacing, says me. The latter's more likely.

Engine has not been tuned up since rebuild. Will need a tuning now that everything's settled.

It has new manifold gaskets on both sides, new flange gaskets on both sides, and dual exhaust.

Brake master cylinder has a booster—bloke thinks condition of master cylinder is because of shit coating that leaves the factory being the cause of them all rusting. "It's either shit metal or shit coating." I'm inclined to agree—every fucken one I've seen so far that didn't have a brand new—or painted—master cylinder is rusted to fuck. On the plus side the rust is just surface rust but I'm inclined to test that servo housing myself cuz I don't trust it.

Firewall looks good.

No water leaks, wipers are ok but probably need new pulleys.

Window rubber is tight and good, had a boot at one time.

HE HAS A SLIDE WINDOW SOMEWHERE HE CAN GIVE ME!! Probably the first thing I'm doing on this car is installing that fucken sliding window and my rifle rack.

Rear signals don't work because the pins/switches are mixed up, also horn doesn't work. Need to figure this out. If I can't do it maybe I can get that sparky down the block to have a squiz at it.

Engine sounds fucken incredible. 360 V8 with C6 tranny.

GVW is rated at 07500 so it'll hold Matilda.

Wheels are 16in 6ply.

2 petrol tanks, 20gal front & 25gal rear.

Fuel gauge doesn't work. Bloke has the new gauge ready, just hasn't installed it. Maybe there's a problem with the sending unit. Considering it doesn't work for either petrol tank I'm pretty sure it's not a float saturation problem.

Whatever dipshit installed the old manifold gaskets had the wrong size square which caused a leak (maybe F350?)—this is fixed now! She rides smooth.

Rust above windscreen rim causing improper seal along the drain rail—luckily it's not rusted through. Can be fixed but may need a plate welded on. I can do that myself.

Old BB holes in windscreen. I like them for their character but they're gonna crack the entire windscreen eventually, especially in the Australian heat as the windscreen warms. Need to replace windscreen.

One crack in dash around radio, dashboard is clean otherwise. I don't care about the crack but replace radio with an early 70s AM/FM with AUX jack.

ORIGINAL COLOUR IS PEACOCK BLUE WITH WHIMBELDON WHITE STRIPE! Restore to og paint because bloke wants me to. "I'm happy if it goes to someone who'll treat it well and make it look factory."

Passenger mirror is cloudy, needs a clean or possibly replacement.

Engine was rebuilt less that 3,000mi ago and has a 100,000mi warranty.

Bloke will get me a copy of the work order of all the work done to the ute—total of $12,000 for the work done.

"I know he did SOMETHING with the transmission." Tranny likely not rebuilt but WAS removed for alterations during engine rebuild.

Has hooks AND ringlets for turnbuckle attachment for camper.

Has rig mirrors.

Has reinforced tray springs. Has reinforced front, auxillary, and rear shocks.

No carpeting on interior. Get rubber mats I don't want blood in my carpet.

Get a seat cover so Misty doesn't ruin the vinyl.

Has manual steering and manual brakes. Get power disc brakes put in ASAP. I can do the power steering myself. In the meantime, maybe a suicide knob?

[scottscollisionrepair]

Transform Your Truck with Expert Spray-In Bedliner Repair

Is the bedliner of your truck showing signs of wear and tear? Those cracks, scratches, and chips can make your vehicle look less than its best. But fear not – at Scott's Collision Repair, we specialize in the art of spray-in bedliner repair, and we're here to give your truck a fresh lease on life.

Why Choose Our Spray-In Bedliner Repair Services?

At Scott's Collision Repair, we know how important your truck's appearance and functionality are to you. That's why we offer top-quality spray-in bedliner repair services that set us apart:

Experienced Technicians:

Our team boasts years of experience and expertise, ensuring that your truck's bedliner will be in capable hands.

Premium Materials: 

We use only the finest materials and proven techniques to restore your bedliner to its former glory. Expect results that last.

Tailored Solutions: 

We understand that every truck is unique, and so are its repair needs. We customize our services to match your specific requirements, guaranteeing a perfect fit and finish.

Speedy Turnaround: 

We value your time. Our efficient team is committed to completing your spray-in bedliner repair promptly, so you can hit the road with confidence.

The Scott's Collision Repair Approach to Spray-In Bedliner Repair

Thorough Assessment: 

We kick off the process by conducting a comprehensive assessment of your bedliner to determine the extent of the damage.

Meticulous Preparation:

 Our experts prepare the surface meticulously, removing any damaged or loose material to create a clean canvas for the repair.

Precision Repairs: 

Utilizing advanced techniques, we perform precise repairs to address cracks, scratches, and other issues, restoring your bedliner's structural integrity.

Stringent Quality Checks: 

We subject your bedliner to rigorous quality checks to ensure it looks flawless and functions optimally.

Finishing Touches: 

Once we're done, your bedliner is ready to face the world, appearing as pristine as it did when it rolled off the assembly line.

Take the First Step Today!

Don't let a damaged bedliner detract from the aesthetics and performance of your truck. Reach out to Scott's Collision Repair today for expert spray-in bedliner repair. Click the link below to schedule your repair or request a no-obligation quote:

Get Your Free Quote Now

Alternatively, feel free to give us a call at 9037852524 to speak with our friendly team. Discover how we can revive your truck's bedliner and make it look as good as new.

[thegranulator]

Five points of protection for organic fertilizer equipment

Due to the seasonal use of organic fertilizer equipment and its own limitations, a device can only complete one or more operations, and the operation time is short, and the storage time is long. Therefore, in order to extend the service life of organic fertilizer production line equipment, we should usually do a good job of protection:

1. Rust prevention. After the operation of the organic fertilizer production equipment, the external dirt must be removed, the seeds, fertilizers, pesticides and crop residues in the machine must be cleaned, and water or oil should be used if necessary. Also clean the lubricated area and re-lubricate it. Complex and sophisticated equipment is best stored in a cool, dry, ventilated room; For those simple machines, they can be stored in the open air, but they should be placed on high ground, dry, and out of direct sunlight. Parts should be supported by boards or bricks; Peeling bedliner should be repainted.

2, anti-rot, anti-mildew. The effective storage method is to place the organic fertilizer production equipment in a dry place to avoid the sun and rain.

3, equipment anti-aging. Rubber or plastic products due to the role of oxygen in the air and ultraviolet rays in the sun, easy to age deterioration, so that rubber parts poor elasticity, easy to break. It is best to coat the rubber surface with hot paraffin oil, put it on the indoor shelf, covered with paper, keep it ventilated, dry, and avoid direct sunlight

4, anti-deformation. Springs, transmission belts, tires and other parts will cause plastic deformation due to long-term stress or improper placement, so appropriate support should be provided under the frame; Take the tire out of load; All compressed or pulled springs on the machine must be relaxed; Remove the drive belt and store it indoors; In addition, the removed parts should be prevented from being squeezed and deformed when stored.

5. Prevent loss. For long-term parked organic fertilizer production equipment, registration cards should be established to record the technical status of equipment, accessories, spare parts, tools, etc.; All kinds of equipment should be kept by special personnel; Disassembling parts for other purposes is strictly prohibited.

[ourericalar001-blog]

If you are applying Bedliner in your truck, then after some time you need to remove it from your truck bed. Some people think this process is very aggressive, but it's not true. Here you can see some steps to for how to remove rhino liner.

[bedlinerspray-blog]

Important Things to Know About Truck Bedliners

Truck are types of vehicles for carrying items such as goods, tools, and equipment, and they have beds on the back to accommodate items being transported. When people buy trucks, they should also buy all vital truck accessories to increase their efficiency and keep them in the right condition, and one of the essential accessories is the truck bedliners. The spray on liners are materials which are placed on the bed of the truck to act as the exterior liner, and it has many benefits to every truck. Truck bedliners increases the durability of the truck because the bed will be protected from items which can cause damages since the bedliners provide protection to the truck beds. Some trucks are used to transport items such as metals and stones, and they can scratch and leave unwanted marks on the beds, but when people install truck bedliners, the trucks are protected hence reducing the maintenance expenses.

Truck bedliners also increase the aesthetic of the truck because truck bedliners are made with attractive designs, and trucks with high quality bedliners have much value. There are different types of truck bedliners in the industry and truck owners buy according to the level of protection they need to put on their trucks. One type of truck bedliners are drop-in truck bedliners, which are designed according to the measurements and style of the truck bed, and they are dropped without professional installation services. Drop-in truck bedliners are bolted every corner to ensure they do not slide when the truck is moving. Another type of truck bedliners is spray on bedliners, which are the best in the market, and they are applied by spraying the truck bed with materials that dry to form a protective layer, and it cannot be removed without professional assistance. Spray on bedliners are liked by many people because they are non-slippery, durable, and available in different colors; hence, people can choose spay on bedliners which match the paint of the truck. Get more details about liners here: www.speedliner.com.

Buying truck bedliners is not an easy task, especially for people who not familiar with truck accessories, and they are advised to consider various factors to ensure they buy the best truck bedliners. One of the factors to consider when buying truck bedliners is the budget because truck bedliners are sold at different prices depending on the material, type, and the pricing policies of the dealer. Buyers should know the best truck bedliners are not cheap, and they should spend much money to get durable protection for their trucks. Get more details about bedliners here: https://www.reference.com/vehicles/prepare-truck-spray-bedliners-5f333ee436be086e.

[sprayinbedliners-blog]

Steps for Applying Spray on Bed Liner

It is possible to do truck bed liner spray in a professional manner. You can get some premium truck bed liners that are available in the market and they come with a nationwide warranty. The truck bed liners are also durable and have some very good looks. You also need to understand that it is possible for you to apply truck bed liner spray yourself which can help you save a lot of money. When applying the truck bed liner spray, there are some important materials that you should have and they have been included in this article. The first thing that you will need is a bed liner coating, an eight-foot bed and some gallon covers. Click here for more info about this company: speedliner.com.

You need to know that you will need up to five gallons of professional spray for the bed liner and hence you need to have as much as possible. You will also need some equipment for spraying together with the nozzle size and type that has been recommended by the maker of the coating. For degreasing, you will need acetone or xylene and also have some protective gloves. It is also important for you to have masking tape and some paper so that you can mask all the parts that you don’t want to spray. The other things that you need to have include an abrasive pad or sandpaper, something for mixing the paint and a respirator. You can get these services at the Speedliner company.

While spraying on the bed liner, here are the steps that you should follow. You need to start by removing the tailgate and then the bolts as well as any hardware that does not require any coating. The next step should be preparing of the surface which should include washing the bed using a high pressure washer and then rinse and leave to dry. You should them remove any wax and grease that is available which needs to be done before sanding so that it does not spread the wax at the whole of that place.

Sand the whole place that needs coating which will also remove all the gloss by using a fairly coarse sandpaper or abrasive. You should then remove the sanding residue by sweeping it and them wash the bed a second time. After using a solvent on the bed once more, you should them mask the truck so that you do not end up over spraying. After spraying and leaving for the right time, you should spray another coat if you so wish until you get the kind of results you want. You should then remove the mask and leave it to cure. Explore more on bed liners here: https://www.reference.com/vehicles/prepare-truck-spray-bedliners-5f333ee436be086e.

[allaboutbedliners-blog]

All You Need to Know About DIY Spray-In Bed Liner

When you are in need of a brand new look for your truck bed, you will need to get an expert bed liner that is suitable for your truck. The coat will be essential as it will cover all the dents as well as protect you from water on the truck. This procedure will also make your truck bed look new. Moreover, when you have the right spray on your truck, it will offer increased friction on the kind of loads and the stuff that your truck carries as it helps much.

Your truck bed will have no scratch marks when you offer the right spraying services. If you are carrying shifting objects, there will not be dents formed. There are various kinds of bend liners; choosing one that will help you focus better on your performance is one of the main ideas that you need to keep in consideration.

You find that installing a bed liner is very easy. You need some holes to ensure that it is fit for the services that you needed. With the right facilities, it will make the bed liner firm, and this is essential for your everyday needs. You then need to get the right spray paints that will succeed for your truck bed liner as this is essential.

You need to know that the quality of the spray-in that you buy is of high quality. The quality of the paint is another thing that you need to look at. You find that considering those truck beds that have been in service for a longer time will be very important in helping you enjoy the best paints to keep them looking new. The best quality paints are durable and will serve you for a more extended period. Check out also this  spray on bedliner colors.

The good thing is that you can use the DIY kits to spray over the truck bed liners so that you get to enjoy professional results. You can pick to carry out the painting procedures on an afternoon so that it can end up drying fast. There is a need to ensure that before you start any work focus on cleaning the truck bed carefully. If the car came with the truck bed liner, you need to ensure that you first remove it carefully. Later you need to clean the truck bed, no need for a specification for the truck bed that is suitable for you as this is very important.  See more info from this company page here. Gather more facts by clicking here: https://en.wikipedia.org/wiki/Truck_bedliner