#PolyTerra PLA

[measuredandslow]

Finally got my hands on some of the PolyTerra PLA Gradient and it did NOT disappoint, it’s so pretty 🤩

[filamentcolors]

Swatcheriffic! Polymaker's Mixed Berries PolyTerra PLA has been added!

[3djenny]

up to now I've mostly worked with one type of filament, polyterra PLA, with a couple experiments in PETG. recently though, I got a spool of eryone silk dual color PLA (in bi pride colors for my bi friends), running calibrations gave me the mother of all jams.

i started out with a normal temp tower, and learned that i absolutely cannot print this stuff below 195f, as evidenced by the fact that the tower snapped off at that height at just stopped extruding.

I also had some really nasty stringing, so i set up a retraction test, and that's when i realized i hadn't cleared the clog as well as i thought i had. i got about 1 layer down when it started jamming, leaving me with this

on lifting the head and taking a closer look, i found this lad glommed onto the heater block

and this was inside the insulator covering

lovely.

all told, i pulled all this out of the hotend, after removing the nozzle and bowden tube, and picking it out with a needle and a spare piece of filament

but hey, at least i got the UBL working!

[3dshark-si]

Polymaker PolyTerra PLA Charcoal Black

3Dshark PLA filament Aluminium 1000g 1.75mm

Polymaker PolyTerra PLA Charcoal Black PolyTerra™ PLA Charcoal Black je filament za 3D tiskanje na osnovi bioplastike, na novo zasnovana naslednja generacija PLA filamenta, ki zagotavlja enostavno uporabo, kakovost tiskanja, hitrost in zanesljivost. To je trajnostni izdelek, pridobljen iz naravnih virov in za vsak proizveden kolut filamenta je posajeno drevo. Glavne značilnosti: Bolj okolju…

[sodakliberty]

Print Results from Makerbox 16

Print Results from Makerbox 16

Makerbox Everything 16 This post may contain affiliate links. To find out more information, please read my disclaimer. Back in November of 2021, I received my Makerbox 16 Everything subscription. Unfortunately, I fell behind on these boxes due to building out a new shop and backing up orders. There will only be one more Makerbox before I am fully caught up! The Everything box includes four…

[xav-acid]

I think I accidentally put in 0 infill. Yikes! I'll just leave it to finish and see how it goes. #3DPrinting #thingiverse #amadillobowl #ender2 #polyterra #pla #mintgreen https://www.instagram.com/p/CZzu4OLhFPw/?utm_medium=tumblr

[digital-cameras-singapore]

Film Friday: These 3D-printed film cases keep your 35mm and 120 film safe on-the-go

Film Friday: These 3D-printed film cases keep your 35mm and 120 film safe on-the-go

This is the 35mm three-pack film case, printed with PolyMaker PolyTerra PLA Matte Black on a Prusa Mini+. In last week’s installment of Film Friday, I briefly mentioned the storage cases I keep my 35mm and medium format film in when out shooting. Today, I’m going to give a brief overview of these 3D-printed canisters, which I first came across on Thingiverse, a website dedicated to sharing 3D…

[ozrobotics]

[j0shikun]

Hello Meridian,

Well I‘ve certainly been procrastinating on this project a looong long time, but I‘ve finally started to print the helmet. I also already have some design ideas that I‘m going to share later on. This project will take a long time but I‘m excited to finally have started with it.

A few fun facts about this print:

The files for the print of this Helmet are from the Galactic Armory ( galacticarmory.net if anyone is interested) and they are great because they come pre cut for ease of printing

The front piece took about 44 hours to complete printing

The back portion currently on the printer will probably take 56+ hours

I ran out of blue filament during the print and had to switch to my yellow spool

I use Polymakers PolyTerra PLA filament, in this case in blue and yellow, cause those were the colours I bought months ago

The printer is an Anycubic Mega X

Hello Meridian.

I really enjoyed the short story about Krells arrest. Revisiting the characters Kyber, Exit and their batalion was cool and it also made me reread the part where Hevy and Padme watch the maltreatment of the men under Krells command through Exits perspective and the part where Hevy and Kyber meet each other.

Unrelated to your story I have wanted to 3D-print and paint a clone scout trooper helmet. I was, until now, however unsure how to paint the helmet and I didn‘t want to leave it white.

I would like to make Exits helmet. Seeing as he is your OC however, I wanted to ask pemission. I also wanted to ask if you have a picture in your head of what his helmet looks like, or if you have any sugestions or wishes for the design. The story states that the batalion colour is maroon, so that will be the coulor I‘ll go for, unless you wish otherwise.

I would love to hear your thoughts on this.

May the force be with you,

Joshua

Oh, wow!!! I’m so glad you enjoyed it! That’s so neat that you plan to 3D print a helmet!!! that’s so cool!!!!!

You definitely have permission, although I’m sorry to say I didn’t really imagine a specific design for Exit… it’s one of my fatal writing flaws haha I just kind of imagine a blank space where my characters are for some reason so I often forget to describe them. Maroon is what I imagined, though, and perhaps looking like it’s seen some wear and tear. That’s all I’ve got though!

[filamentcolors]

Something you might be interested in! Polymaker's Army Purple PolyTerra PLA now listed!

[filamentcolors]

A new swatch appears! Polymaker's Muted Blue PolyTerra PLA now listed!

[filamentcolors]

A new swatch appears! Polymaker's Ash Grey PolyTerra PLA is listed here:

[filamentcolors]

SWATCHES! Polymaker's Orange PolyTerra PLA joins the library!

[filamentcolors]

Swatches abound! Polymaker's Army Red PolyTerra PLA is now available in the library!

[filamentcolors]

What's that I see? A new swatch‽ Polymaker's Charcoal Black PolyTerra PLA is now in the library!

[filamentcolors]

More colors! Polymaker's Peach PolyTerra PLA now listed!