#PVCDecorationSheetExtrusionMachine

[henry-jwell]

Super Mirror Roller

Super mirror surface roller is a key part of sheet and plate equipments. The rule is that the more smooth and precise the roller surface, the better the product quality. And, we always strike for the smallest possible surface roughness tolerance to the level of Ra0.005um. The optics grade product is applied for producing LED panels, electronics, thin-film switch of electric appliances, and high end consumer products section like PC monitor, mobile phone screen and etc. ● The surface roughness level of the roller can be reached Ra0.005-0.01μm; ● The cylindricity and cocentricity of the roller can be reached ≤0.005mm; ● Enhanced roller rigidity and minimized roller surface temperature deviation through special roller structure design. ● Max. diameter and length of the roller: Φ1600×14000mm ● Max. weight of the roller: 15000kg ● Roundness and coaxiality: ≤ 0.01mm ● Roughness of the surface: Ra 0.005～0.01μm Product image display Read the full article

[henry-jwell]

Super Mirror Roller

Super mirror surface roller is a key part of sheet and plate equipments. The rule is that the more smooth and precise the roller surface, the better the product quality. And, we always strike for the smallest possible surface roughness tolerance to the level of Ra0.005um. The optics grade product is applied for producing LED panels, electronics, thin-film switch of electric appliances, and high end consumer products section like PC monitor, mobile phone screen and etc. ● The surface roughness level of the roller can be reached Ra0.005-0.01μm; ● The cylindricity and cocentricity of the roller can be reached ≤0.005mm; ● Enhanced roller rigidity and minimized roller surface temperature deviation through special roller structure design. ● Max. diameter and length of the roller: Φ1600×14000mm ● Max. weight of the roller: 15000kg ● Roundness and coaxiality: ≤ 0.01mm ● Roughness of the surface: Ra 0.005～0.01μm Product image display Read the full article

[henry-jwell]

Super Mirror Roller

Super mirror surface roller is a key part of sheet and plate equipments. The rule is that the more smooth and precise the roller surface, the better the product quality. And, we always strike for the smallest possible surface roughness tolerance to the level of Ra0.005um. The optics grade product is applied for producing LED panels, electronics, thin-film switch of electric appliances, and high end consumer products section like PC monitor, mobile phone screen and etc. ● The surface roughness level of the roller can be reached Ra0.005-0.01μm; ● The cylindricity and cocentricity of the roller can be reached ≤0.005mm; ● Enhanced roller rigidity and minimized roller surface temperature deviation through special roller structure design. ● Max. diameter and length of the roller: Φ1600×14000mm ● Max. weight of the roller: 15000kg ● Roundness and coaxiality: ≤ 0.01mm ● Roughness of the surface: Ra 0.005～0.01μm Product image display Read the full article

[henry-jwell]

PVC foaming board and WPC foaming board Extrusion Line

PVC foaming board and WPC foaming board application Transportation industrial: Ship, plane bus, chamber of train, roofing, core layer, inner decoration board. Construction and decoration industial: outer wall board, inner decoration board, housing, office,public construction board, furniture, cupboard,roofing. Adopting printing, film coating and thermo-embossing equipment, will get all kinds of emula-tional wooden product. PVC foaming board extrusion line This extrusion line is made according to the features of free foamed board and skinning foamed board by using the extrusion system for free foamed board machine and the downstream equipment for skinning foamed board. The product produced by this machine has the features of smooth surface, low density, and the surface hardness of the product is between the skinning foamed board and free foamed board. The investment of this machine is close to the investment of free foamed board extrusion line, which makes it easy for market promotion. Main technical specification Model Material Products width(mm) thickness(mm) Capacity(kg/h) SJZ80/156 PVC, CaCO3 1220-1600 3-30 300-400 SJZ80/156，SJZ65/132 PVC, CaCO3 1220-1600 3-30 400-500 Note: The specifications are subject to change without prior notice. Product image display Read the full article

[henry-jwell]

PVC Transparent Sheet and Rigid Sheet Extrusion Line

PVC transparent rigid sheet extrusion line PVC transparent sheet have many advantages of fire-resistance, high quality, low cost, high transparent, good surface, no spot, less water wave, high strike resistance, easy to mould and etc. It is applied to different kinds of packing, vacuuming and case, such as tools, toys, electronic, food, medicine and clothes. PVC transparent board is non-toxic, hygienic, good weather resistance, high strength, good transparency, and its physical properties are better than plexiglass. It is widely used in equipment guard board, drinking water tank, liquid level display container, etc. PVC transparent plate: it is divided into PVC transparent hard plate (2mm-20mm) and PVC transparent soft plate (2mm-6mm). The product has the advantages of smooth surface, good transparency, flame resistance, insulation, anti-corrosion, impact resistance, no deformation and good weather resistance. It is widely used in anti-corrosion containers, electrical shields of equipment, light boxes, advertising decoration and other industries. PVC plastic flexible board (1mm - 10mm): the surface of PVC flexible board is smooth and flat, acid and alkali resistant, with the advantages of high strength, small shrinkage, convenient construction and so on. PVC flexible board is mainly used for the lining of acid and alkali resistant and other anti-corrosion equipment. It can also be used as general electrical insulation and sealing gasket materials. It can also be used to lay the floor of chemical workshop, laboratory table, etc. It can be used as an alternative to rubber plate. Main technical specification Model SJZ80/156-1500  SJZ92/188-2200 Extruder specification SJZ80/156 SJZ92/188  Products thickness 0.2-3mm 1-3mm Main motor power 75kw 110kw Capacity 350kg/h 550kg/h Note: The specifications are subject to change without prior notice. Our product application LED photoelectric, LED liquid crystal display field; automobile industry lightweight, environmental protection interior decorative materials; battery in the field of new energy vehicles; the field of optical grade application of composite materials; packaging of food grade packaging, consumer goods; energy saving and environmental protection type building new building waterproof materials; environmental protection; new materials in the field of advertising; the field of white goods new material. Read the full article

[henry-jwell]

PVC Imitation Marble Board Extrusion Line

PVC Imitation Marble Board: a. The surface of the board is covered with imitation marble pattern, or heat transfer imitation marble pattern and UV curing treatment, good scratch resistance. b. Board with variety of color,it’s convenient to construct. c. Replace the natural stone such as marble in the interior wall decoration, good ageing resistance, UV resistance, yellowing resistance, green environmental protection, no radiation. Main technical specification Model Material Extruder specification Products width(mm) Thickness(mm) Capacity(kg/h) SJZ80/156 PVC JWS150/38; 90/35 1220 4-6 600 Note: The specifications are subject to change without prior notice. Product image display Mirror roller surface treatment ● Quenching with Subsequent tempering, ensures the density of the structure. ● Outer surface deeply quenched, the hardness can be reached HRC 50~55. ● Surface electrolyze hard chromed, the hardness can be reached HRC 58~65. ● Mirror roller, super mirror roller grinding and polishing processing. ● We can process different kinds of roller surfaces, such as leather veins, matt, mist, frosting, net veins. And we can make the roller according to the client’s samples. ● The surface sprayed by Teflon, different kinds of rubber rollers. ● Pouble（double）shells, insicle(inside) sprial tunnel design, pefect cooling efficiency. ● Adope(adopt) the thermal interference type, high strength, crowning to compensate of bending the sheet/ plate/ film final produts tolerance. Read the full article

[henry-jwell]

PVC foaming board and WPC foaming board Extrusion Line

PVC foaming board and WPC foaming board application Transportation industrial: Ship, plane bus, chamber of train, roofing, core layer, inner decoration board. Construction and decoration industial: outer wall board, inner decoration board, housing, office,public construction board, furniture, cupboard,roofing. Adopting printing, film coating and thermo-embossing equipment, will get all kinds of emula-tional wooden product. PVC foaming board extrusion line This extrusion line is made according to the features of free foamed board and skinning foamed board by using the extrusion system for free foamed board machine and the downstream equipment for skinning foamed board. The product produced by this machine has the features of smooth surface, low density, and the surface hardness of the product is between the skinning foamed board and free foamed board. The investment of this machine is close to the investment of free foamed board extrusion line, which makes it easy for market promotion. Main technical specification Model Material Products width(mm) thickness(mm) Capacity(kg/h) SJZ80/156 PVC, CaCO3 1220-1600 3-30 300-400 SJZ80/156，SJZ65/132 PVC, CaCO3 1220-1600 3-30 400-500 Note: The specifications are subject to change without prior notice. Product image display Read the full article