#Nithin Kantharaj

[nithinkantharaj-blog]

Nithin Kantharaj’s Experience as a Manufacturing Engineer for Zimmer Biomet

After he finished his MS in Industrial engineering from the University of Texas at Arlington, Nithin Kantharaj got the opportunity to work for Zimmer Biomet. He joined the company in December 2017 as a manufacturing engineer. He was selected for the role on the basis of his experience of working for firms like Magod laser machining Private Ltd, Bangalore and Ultra weld engineers, Bangalore.

At Zimmer Biomet, Nithin Kantharaj was responsible for:

Development of wide variety of manufacturing processes for new products, establishing preliminary Bill of Materials (BOM’s) and routers in oracle JD Edwards and Creating and revising Standard Operating Procedures (SOP’s), Work Instructions for the developed processes.

Conducting Feasibility Study to estimate product cost and analyze capital equipment, capacity and capability requirements affecting the make vs. buy decision for new products.

Performing Equipment Installations and Conducting Installation Qualifications (IQ) to setup and optimize production lines for new products.

Development of Protocols for Gage R&R studies, Capability analysis using Minitab and reporting results of studies to qualify measurement methods and manufacturing processes.

Creation and Approval of Engineering Change Requests (ECN), Design Transfer and Manufacturing Transfer documents to support transition of new products into production environment and Training Operators on product quality competencies for new products.

Development and Review of pFMEA’s, Project Plans , Quality Plans, First Article Layouts (FALs), Measurement Instruction Sheets (MIS) and Inspection Instruction Sheets (IIS) for new products

Currently, Nithin is working for a well-known firm in Flanders, New Jersey, USA as a Product Engineer/Project Engineer. Nithin Kantharaj is a young professional who is extremely skilled at working with design and stimulation tools like SIMU, AutoCAD, ANSYS, Unigraphics NX, and Catia. When he is not working, he enjoys gaming, playing sports, and travelling.

[nithinkantharajengineer]

List of Responsibilities Nithin Kantharaj Used To Handle At Zimmer Biomet

Nithin Kantharaj is an engineering professional who has expertise in Lean Manufacturing, SPC, TQM, Time and Motion Study, Value Stream Mapping, Six Sigma (DMAIC), KANBAN, ISO, PFMEA, DFMEA, KAIZEN, GD&T, Root cause analysis, Corrective and preventive action(CAPA), JIT, 5S, IQ, PQ, and QP.

Nithin Kantharaj is currently working for a leading medical technology company. Previously, he used to work at Zimmer Biomet where he was involved in:

Development of a wide variety of manufacturing processes for new products, Establishing preliminary Bill of Materials (BOM’s) and routers in Oracle JD Edwards and Creating Standard Operating Procedures (SOP’s), Work Instructions for the developed processes.

Performing Equipment Installations and Conducting Installation Qualifications (IQ) to set up and optimize production lines for new products.

Writing protocol and executing the Master Validation Plans, Validation Protocols, Test Method Validations, Conducting Installation, Operational and Performance Qualifications (IQ, OQ/PQ)

Development of Protocols for DOE’s, Gage R&R studies, Capability studies analysis using Minitab and Reporting results of studies to qualify measurement methods and manufacturing processes.

Creation and Approval of Engineering Change Requests (ECN), Design Transfer and Manufacturing

Development and Review of FMEA’s, Project Plans, Quality Plans, First Article Layouts (FALs), Measurement Instruction Sheets (MIS) and Inspection Instruction Sheets (IIS) for new products.

Moving parts from inventory, which required Work order maintenance. Changed the documentation, did line clearance before it was sent to production and tracking the order until it reached the inventory.

Nithin Kantharaj is fluent in English, Tamil, Telugu, and Kannada. He has received his higher education from the University of Texas at Arlington and PES Institute of Technology. Nithin can work with cross-functional teams effectively to involve them in R&D, new development, etc. He likes to spend his time away from work playing video games and watching sports.

[ligaligmikeortega]

Nithin Kantharaj Is a Part of the Commercial Team of Leading Medical Technology Company

Nithin Kantharaj Is a Part of the Commercial Team of Leading Medical Technology Company

Nithin Kantharajis a young professional living in the Greater New York City area who is working as a product engineer for a leading medical technology company. He is responsible for updating the tester as the requirements change for the testing sub-assemblies and troubleshooting. Nithin is very likely to be promoted to the position of a project engineer in taking care of the project related…

[issuewire]

Nithin Kantharaj Is a Highly Skilled Product Development - Project Management Professional

[nithinkantharaj-blog]

Nithin Kantharaj – An Engineering Professional Who Shows Initiative & Creativity in Honoring Commitments

Nithin Kantharaj is a young professional who is a part of the commercial team of a growing company where his main responsibility is to troubleshoot and update the tester on the production floor when it is down and schedule the project as per requirements. The leading medical technology company he is currently associated with offers him challenging assignments in a relevant and growing industry. He is extremely passionate about his work and strongly believes in inspiring others. As a responsible product engineer/project engineer, he always shows initiative and creativity in honoring commitments. He translates listening into action and always strives to improve. He also manages multiple projects simultaneously and makes sure all the projects are completed as per the schedule and do not go over the timeline. He troubleshoots and updates the tester on the production floor.

Nithin Kantharaj has completed his MS in Industrial Engineering and his Bachelor’s in Mechanical Engineering from the University of Texas and the PES Institute of Technology, Bangalore respectively. He has an expertise in Lean Manufacturing, SPC, TQM, Time and Motion Study, Value Stream Mapping, Six Sigma(DMAIC), KANBAN, ISO, PFMEA,DFMEA, KAIZEN, GD&T, Root cause analysis, Corrective and preventive action(CAPA), JIT, 5S, IQ,PQ, and QP. Over the years, he has also worked on a variety of projects including the failure mode effect analysis of Samsung note components, quality analysis on Toyota 9 million recall, and simple and multiple linear regressions.

Nithin likes to spend his leisure time playing video games, sports and traveling to new destinations. Nithin Kantharaj started his professional journey back in the year 2017 as a Manufacturing Engineer for a reputed firm where he used to develop IQ test scripts for the IQ protocol and execution. He also developed validation plans, wrote protocols and executed the master validation plans.

[nithinkantharaj-blog]

Nithin Kantharaj Can Interact With Cross-Functional Teams Effectively

Nithin Kantharaj is a well-educated professional who has a great command over design & simulation tools like SIMU, AutoCAD, ANSYS, Unigraphics NX, and Catia. In addition to that, he has expertise in SQL and VBA in excel as well. He can work with cross-functional teams effectively to involve them in R&D, new development, etc.

Nithin has completed his graduation from the University of Texas and the PES Institute of Technology. He is a well-educated professional who specializes in Lean Manufacturing, SPC, TQM, Time and Motion Study, Value Stream Mapping, Six Sigma(DMAIC), KANBAN, ISO, PFMEA, DFMEA, KAIZEN, GD&T, Root cause analysis, Corrective and preventive action(CAPA), JIT, 5S, IQ, PQ, and QP. Nithin Kantharaj is currently associated with a leading medical technology company in New Jersey.

He is part of the commercial team of a growing company where his main responsibility is to troubleshoot and update the tester on the production floor when it is down and schedule the project as per requirements. Nithin Kantharaj manages multiple projects simultaneously and makes sure all the projects are completed as per the schedule and do not go over the timeline. He uses Teamcenter to perform Engineering change (EC), NX for design reviews and changes, SAP for updating and releasing the official documents associated for the tester and updating the bill of materials (BOM) as required, and MS office for scheduling the project and maintaining the timeline of the project.

Before he joined this company, Nithin was working with another well-established company where he was the face behind the development of a wide variety of manufacturing processes for new products, establishing preliminary Bill of Materials (BOM’s) and routers in Oracle JD Edwards and Creating and revising Standard Operating Procedures (SOP’s), Work Instructions for the developed processes.

Nithin enjoys spending his time away from work playing video games and watching sports. He even contributes to social causes.

[nithinkantharaj-blog]

Roles and Responsibilities Nithin Kantharaj Handles at His Current Association

Nithin Kantharaj has been working for a leading medical technology company in Flanders, New Jersey for more than a year now. He completed his master’s degree in Industrial engineering from the University of Texas at Arlington. Thanks to his experience of working as an intern for firms like Magod laser machining Private Ltd, Bangalore, and Ultra weld engineers, Bangalore, Nithin has always been confident about handling every task gracefully. Nithin Kantharaj handles a number of different roles and responsibilities here. These include but are not limited to

Troubleshooting and updating the tester on the production floor when it is down and scheduling the project as per requirements

Leading the project from scheduling until it’s been validated and released for production

Managing multiple projects simultaneously and making sure all the projects are completed as per the schedule and do not go over the timeline

Interfacing with cross-functional teams and getting them involved as the project progresses including R&D, New development, Software developers, DQE, QE, and V&V Engineers

Assisting the production when the tester is down, as per the urgency and production requirements

Budgeting the project and design to cost for the projects for upcoming projects

Taking over new development projects as necessary and project requirements as requested by production and R&D

Updating necessary tester requirements, doing required design changes, updating the software, and validating the tester by developing the scripts and performing local OQ and IPQ

Nithin Kantharaj is a young professional who is extremely skilled at working with design and simulation tools like SIMU, AutoCAD, ANSYS, Unigraphics NX, and Catia. He has worked on a number of academic projects as well. When not working, Nithin enjoys playing video games and sports and traveling.

[nithinkantharaj-blog]

Nithin Kantharaj Is Responsible For Updating the Tester as the Requirements Change

Nithin Kantharaj is a young professional living in the Greater New York City area who is working as a product engineer for a leading medical technology company. Nithin considers him extremely lucky that he got the opportunity to start his professional journey with a company like Zimmer Biomet. He was hired as a manufacturing engineer after he completed his MS in industrial engineering with a great score. He is responsible for updating the tester as the requirements change for the testing sub-assemblies and troubleshooting. Nithin is very likely to be promoted to the position of a project engineer in taking care of the project related deadlines, details, and talking to cross-functional teams to keep the project on track so we have them on time for production.

Nithin Kantharaj has been working for this company for more than a year now. He is a part of the commercial team and manages multiple projects simultaneously. The different software he uses are:

Teamcenter – for performing Engineering Change

NX – for design reviews and changes

SAP – for updating and releasing the official documents associated with the tester

MS Project – for scheduling the project and maintaining the timeline of the project

At his first company, Nithin Kantharaj worked on a number of things right from developing a wide variety of manufacturing processes for new products, establishing preliminary Bill of Materials (BOM’s) and routers in Oracle JD Edwards and Creating and revising Standard Operating Procedures (SOP’s) to developing protocols for Gage R&R studies, Capability analysis using Minitab and reporting results of studies to qualify measurement methods and manufacturing processes.

Nithin has graduated from the University of Texas at Arlington. He is quite good at working with design and simulation tools like SIMU, AutoCAD, ANSYS, Unigraphics NX, and Catia.

[nithinkantharaj-blog]

Nithin Kantharaj Had the Opportunity of Working on a Variety of Projects

Nithin Kantharaj has completed his MS in industrial engineering and bachelor’s degree in Mechanical Engineering from the University of Texas at Arlington and the PES Institute of Technology respectively. He has the experience of working with various leading companies and is a polished product development and project management professional. Before he started working full-time, he interned with a few reputed firms. As a student intern at UT Southwestern, Nithin worked on self-management for diabetes using quality improvement and worked as a quality control/improvement trainee with Magod Laser Machining Private Limited, Bangalore. Nithin Kantharaj also had the opportunity to work on various projects all these years that have added to his skill-set. Some of those are:

Economics analysis

Time study on work performance

Failure mode effect analysis on Samsung components

Simple linear regression and multiple linear regression

Design and fabrication of drilling machine

Quality analysis on Toyota 9 million recall

As a quality control intern for Ultra Weld Engineers, Bangalore, his roles and responsibilities included assisting the team for tracking progress of manufacturing products on-site, reviewing AutoCAD drawings to provide inputs for quicker and easier installation and suggesting corrections in the manufacturing process for better Quality, and Implementation of 5S, KAIZEN and JIT on the production floor by reducing the size of move batches and implementing better forecasting and scheduling practices for material handling within the shop floor. Nithin Kantharaj can manage multiple projects simultaneously while making sure all the projects are completed as per the schedule and do not go over the timeline. He also has experience developing a validation plan, writing protocol and executing the master validation plans, validation protocols, test method validations, conducting installation, operational and performance qualifications to determine the effectiveness and ensure compliance to quality standards for manufacturing processes.

[nithinkantharaj-blog]

Nithin Kantharaj Used Simple and Multiple Linear Regressions to Analyze the Success of a Movie

Nithin Kantharaj has completed his graduation from the University of Texas at Arlington and is currently working for a leading medical technology company. He is quite good at working with design and simulation tools like SIMU, AutoCAD, ANSYS, Unigraphics NX, and Catia. Nithin has also worked on a variety of projects over the years. In the year 2016, Nithin Kantharaj worked on a project related to simple and multiple linear regressions. The project was conducted to measure the parameters for the box office collection of a movie using the budget, director, actor, and the number of prequels as independent variables. He collected the data set required for the variables to further analyze the success of a movie. He conducted this analysis using SAS and MINITAB, to look for trends and further determine the variable for the success of the movie. Post analysis, he came to the conclusion that 88.59% of the model is explained by the variables actor and budget, which results in huge box office collection. Other than this, the other projects he has worked upon include failure mode effect analysis on Samsung components, quality analysis on Toyota 9 million recalls, economic analysis, time study on work performance, and design and fabrication of a drilling machine. Nithin Kantharaj is currently working as a Product Engineer, NPD (commercial side) for a leading medical technology company in New Jersey where he is responsible for troubleshooting and updating the tester as the requirements change for testing the sub-assemblies. He also acts as a project engineer in taking care of the project related details, deadlines and talking to cross-functional teams to keep the project on track so the team can have them on time for production. Nithin likes to spend his free time playing video games or hanging out with his friends.

[nithinkantharaj-blog]

Nithin Kantharaj Developed a Portable Drilling Machine at a Very Young Age

Nithin Kantharaj is a project engineer who takes care of the project related details, deadlines and talking to cross-functional teams to keep the project on track so the company can have them on time for production. He has bachelor’s and master’s degree in mechanical engineering and industrial engineering respectively.

Nithin Kantharaj has always been a bright student and this can be concluded from the fact that he was successful in developing a portable drilling machine at a very young age. The machine focused on the hurdles faced in the drilling of thin metal sheets, thin foils, and paper. The project aimed at designing and fabricating a self-clamping drilling machine which would help in fully reducing, if not eliminating, such undesirable outcomes in the drilling process. The design and analysis of this project were conducted using Solid Edge, AutoCAD, CATIA respectively to check if the design could perform the operations without breakdown. The main considerations for the drill setup were stability, safety and accuracy and the next major focus was on the self-clamping mechanism, the main concern being a mechanism for automatic return of the clamp after drilling as well as clamping the work piece just before the drill bit approaches for drilling. The final fabricated model was further tested to ensure the major concerns are duly addressed and the drilling process is glitch-free. As a result of extreme dedication, the project was a success.

Nithin Kantharaj is currently working as a product engineer, NPD (commercial side). Before he became a full-time professional, he collected relevant experience through internships with firms like UT Southwestern Medical Center, Magod Laser Machining Pvt. Ltd., and Ultra Weld Engineers.

Nithin spends most of his free time playing video games and sports. He is quite fond of traveling too.

[nithinkantharaj-blog]

Nithin Kantharaj Has Studied Industrial Engineering at the University Of Texas

An expert in Lean Manufacturing, SPC, TQM, Time and Motion Study, Value Stream Mapping, Six sigma(DMAIC), KANBAN, ISO, PFMEA,DFMEA, KAIZEN, GD&T, Root cause analysis, Corrective and preventive action(CAPA), JIT, 5S, IQ,PQ, and QP, Nithin Kantharaj is a talented young man who has a bachelor’s degree in mechanical engineering from the PES Institute of Technology, Bangalore and a master’s degree in industrial engineering from the University of Texas at Arlington.

Nithin is an exceptionally skilled individual and has an unparalleled expertise in

Design and stimulation tools like SIMU, AutoCAD, ANSYS, Unigraphics NX, and Catia

Statistical tools like MS Office (Excel, Access, Project, Outlook, Vision), MINITAB, SAS, and R-Studio

Programming languages including SQL and VBA in Excel

Software like JD Edwards, InfoPV, Enovia, CMS, SAP, and Teamcenter

It was because of his dedication that Nithin Kantharaj had the opportunity of working with some of the best companies in the business as an intern even before he completed his education. Nithin worked as:

a student intern at UT Southwestern, Dallas (self-management for diabetes using quality improvement)

a quality control/ improvement trainee at the Magod laser machining private ltd, Bangalore

a quality control intern at Ultra weld engineers, Bangalore

Not just that, Nithin also worked on some major academic projects that helped him get a better understanding of the domain he was set to step into. The projects he worked upon are failure mode effect analysis of Samsung note components, quality analysis on Toyota 9 million recalls, and simple & multiple linear regressions.

Nithin Kantharaj is currently working for a leading medical technology company in Flanders, New Jersey. Previously, he was associated with Zimmer Biomet as a manufacturing engineer. Here, Nithin used to perform equipment installations and conduct installation qualifications (IQ) to setup and optimize production lines for new products.

[nithinkantharaj-blog]

Nithin Kantharaj’s Internship Experiences with Different Firms

Nithin Kantharaj is a skilled product developer and project manager. He has an expertise in Lean Manufacturing, SPC, TQM, Time and Motion Study, Value Stream Mapping, Six sigma(DMAIC), KANBAN, ISO, PFMEA,DFMEA, KAIZEN, GD&T, Root cause analysis, Corrective and preventive action(CAPA), JIT, 5S, IQ,PQ, and QP. Nithin Kantharaj interned with a number of well set-up firms before he became a full-time professional.

Let us have a quick look at his internship experiences –

Student intern at UT Southwestern, Dallas (self-management for diabetes using quality improvement)

Assisted project lead processes to drive improvements for clients based globally, also developed Poka Yoke, Mistake proofing principles/checkpoints within the production system with goal of moving towards lean production.

Performed Design review, Validation, Engineering change notice (ECNs), BOMs and technical guidelines.

Assisted in minor development of 2D and 3D models, converting to CNC code using MasterCAM software and suggest tools, feed rate and spindle speed for each material from predetermined catalog for the process.

Quality control intern at Ultra weld engineers, Bangalore

Understood Product acceptance criteria listed on detailed drawings and specifications by using GD&T.

Assisted the team for tracking progress of manufacturing products on-site and review AutoCAD drawings to provide inputs for quicker and easier installation and suggest corrections in the manufacturing process for better Quality.

Assisted in Implementation of 5S, KAIZEN and JIT on the production floor by reducing the size of move batches and implementing better forecasting and scheduling practices for material handling within the shop floor.

Quality control/improvement trainee at Magod Laser Machining

Performed Design review, Validation, Engineering change notice (ECNs), BOMs and technical guidelines.

Assisted in minor development of 2D and 3D models, converting to CNC code using MasterCAM software and suggest tools, feed rate and spindle speed for each material from predetermined catalog for the process.

Assist Supplier Quality improvement engineer to complete APQP, PPAP, SCAR documentation process for clients

Nithin Kantharaj is currently working with a leading medical engineering company in Flanders, New Jersey.

[ligaligmikeortega]

Nithin Kantharaj Is Known For Completing Challenging Assignments in the Domain of Medical Technology

Nithin Kantharaj Is Known For Completing Challenging Assignments in the Domain of Medical Technology

Nithin Kantharajis a young professional who is extremely passionate about his work and strongly believes in inspiring others. As a responsible product engineer/project engineer, he always shows initiative and creativity in honouring commitments. He translates listening into action and always strives to improve. The leading medical technology company he is currently associated with offers him…

[issuewire]

Nithin Kantharaj Recommended Corrections to Reduce the Causes of Failure of Components

[issuewire]

Nithin Kantharaj Handled Quality Control at Ultra Weld Engineers, Bangalore