#LAPTOP_STORAGE
Explore tagged Tumblr posts
Photo
Unitek SolidForce NVMe M.2 SSD 10Gbps Enclosure M.2 NVMe SSD enclosure adapter, totally tool-free. USB C 3.1 Gen 2 10Gbps to NVMe PCIe M-Key(B+M Key) Solid State Drive External Enclosure. It supports UASP Trim for M.2 NVMe SSD Size 2242/2260/2280. Model: Y-S1203ABK SuperSpeed USB+: Adopts USB 3.1 Gen 2 that M.2 Enclosure up to 10 Gbps, capable of performance over 900MB/s read/write when using high-performance SSD. The perfect solution for data transfer and data backup, the actual transfer speed depends on the speed of USB Port type, your computer performance, etc. Backward compatible with USB 3.1 Gen1 up to 5Gbps. Compatibility: Compatible with M.2 NVMe PCIe M Key & B+M Key SSD up to 2TB, applicable to sizes 2242/2260/2280 SSDs. Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Note: M.2 NVMe SSD is not included; Supports Windows, Mac OS, Linux, Android. How to Use: 1. Press the lock button on the product. 2. Pull out the PCBA board. 3. Insert the M.2 SSD diagonally down to the PCIe / NVMe slot. 4. Remove the silicone pad and heat sink from the package. 5. Paste the silicone pad accessories on the M.2 SSD card below. 6. Paste the heat sink accessories on the silicone pad below. 7. Gently press down on the M.2 SSD with your fingers and snap it into the plastic snap-on case. 8. When disassembling, also push the buckle outward to release it. Notes: When installing M.2 SSDs, please be careful of static electricity (it is recommended to place your hands on metal objects to discharge). With the M Key interface which belongs to the NVMe protocol channel. When installing the M.2 SSD for this product, please check the interface and protocol channel of the hard disk. Although the USB port of the product supports hot-swapping when installing M.2 SSD, it must be unplugged all power. When inserting the SSD, should be as gentle as possible to avoid scratching the components on the motherboard. When disassembling the hard disk case, please save all data properly to prevent loss. Since Windows 10 and above and Mac OS are the best compatible with NVMe, this product is recommended to get better transmission performance in Windows 10 or higher or Mac OS system. Upstream: USB-C (Male) Downstream: M.2 NVMe SSD (Female) Dimension: 117.5 x 40 x 13.5mm Cable Length: 30cm Color: Black
#SSD_NVME#DESKTOP_COMPONENTS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#ADAPTER#CAS_USB3_TC_M.2_U#ENCLOSURE#M.2_SSD#NVME#SSD#UNITEK#Y_S1203ABK
0 notes
Photo
Unitek USB3.0 M.2 SSD (NGFF/SATA) Enclosure Model: Y-3365 Color: Gray Products Features: Compact aluminium housing, compatible with a variety of sizes of B-Key or M+B Key M.2 SSD (30mm / 42mm / 60mm / 80mm). With USB3.0 Type-C interface, supports up to 5Gbps data transfer speed. It is a reversible plug connector, easy to plug in and out. Backward compatible with USB2.0/1.1. Support UASP and TRIM, maximise the data transfer speed and lifespan of SSD. With a LED light to indicate the working status. With the auto sleep mode function, it saves energy and maximizes the lifespan of the product. Plug and play, hot-swappable, no need to install the driver. Specifications: Product Dimension: 105mm x 40mm x 9mm Upstream: USB-C Male Downstream: M.2 (Female) Cable Length: 30 cm Packaging Content: 1 x USB3.0 M.2 SSD (NGFF/SATA) Aluminium Enclosure 1 x USB-A (M) to USB-C (M) Data Cable 1 x User Manual 1 x Screw (for M.2 SSD) 4 x Screw (for Enclosure) 4 x Screw Cover 1 x Mini Screw Driver Packaging: UNITEK Gift Box
#SSD_NVME#DESKTOP_COMPONENTS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#ENCLOSURE#HDD_USB3_SSD_ENCL#M.2#M.2_SSD#NVME#UNITEK#USB_3.0#Y_3365
0 notes
Photo
Unitek DiskGuard Raiden SATA III 3.5" Enclosure Model Number: Y-3035 Product Features: With e-sports style design, it is a hard drive enclosure that tailor-made for gamers. With LED light indicates the working status. Compatible with all 2.5” and 3.5” SATA HDD / SSD with any capacity. With USB3.0 SuperSpeed data transfer, transfer speed up to 5Gbps. Backward compatible with USB2.0/1.1. Support SATA III (6Gbps), SATA II (3Gbps) and SATA I (1.5Gbps). With UASP (USB Attached SCSI Protocol), accelerates the data transfer speed. With sleep mode function to save energy. Plug and play, no driver installation process needed. Hardware&Dimension: Dimension: 183mm x 119mm x 33mm Cable Length/OD: 120cm/5.5mm Upstream: USB-B Female Downstream: SATA6G Color: Black Package Contents: 1 x DiskGuard Raiden 1 x USB-A male to USB-B male data cable 1 x 12V2A Power Adaptor 1 x User Manual
#EXTERNAL_HDD#DESKTOP_COMPONENTS#STORAGE#LAPTOPS#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#3.5_INCH#CAS_USB3_SATA_ENC_U#ENCLOSURE#SATA_HDD#UNITEK#Y_3035
0 notes
Photo
Unitek NVMe M.2 SSD 10Gbps Enclosure M.2 NVMe SSD enclosure adapter, Unitek aluminum USB 3.2 Gen 2 10Gbps to NVMe PCIe M Key & B+M Key solid-state drive external enclosure supports UASP & Trim, compatible for M.2 M-Key SSD 2230/2242/2260/2280. Model: S1201A Suitable SSD: This M.2 SSD Enclosure only for M.2 NVMe PCIe M-Key & B+M Key SSD. Applicable to sizes 2230/2242/2260/2280 solid-state drives. Does not support M.2 SATA-based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. High Speed: With USB 3.2 Gen 2 interface, supports up to 10Gbps data transfer speed. It's a reversible plug connector, easy to plug in and out. Backward compatible with USB 3.0 and USB 2.0. How to Install M.2 SSD: Remove the screw. Remove the cover. Remove cover and pull out the PCBA. Insert M.2 SSD to PCIe/NVMe slot. Press M.2 SSD down and match the screw slot. Lock M.2 SSD with the screw. Upstream: USB-C (Male) Downstream: M.2 (Female) Product Color: Space Grey Cable Length: 30 cm Product Dimension: 108 x 37 x 9mm Package: 1 x USB3.1 Gen2 Type-C to M.2 SSD (PCIe/NVMe) Enclosure 1 x USB-C (M) to USB-C (M) Data Cable 1 x User Manual 1 x Screw (for M.2 SSD) 4 x Screw (for Enclosure) 1 x Mini Screw Driver
#SSD_NVME#DESKTOP_COMPONENTS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#CAS_USB3.1_TC_M.2_U#ENCLOSURE#M.2#M.2_SSD#NVME#S1201A#UNITEK
0 notes
Photo
Acer FA100 2TB M.2 NVMe Gen3 PCIe SSD THE SPEED TO SUCCEED, WIN AT WORK OR PLAY Built from original high-quality 3D NAND wafers, Acer's FA100 M.2 SSD has become the winner in the marketplace. Making use of its sequential read speed up to 3300 MB/s and sequential write speeds up to 2700 MB/s, the FA100 M.2 SSD handles high workloads efficiently. SAFEGUARDING YOUR DATA, 4K LDPC HIGH-ORDER ERROR CORRECTION FA100 M.2 SSD supports ECC error correction technology and S.M.A.R.T. function, based on 4K LDPC which enables stronger error correction capabilities and improved secure data storage. This effectively reduces data errors that may occur during SSD read and write, avoiding bad blocks for better performance and more reliability. Features: Read speed up to 3300 MB/s 4K LDPC error correction Cost-saving energy efficiency SPECIFICATIONS Model Name: FA100-128GB / FA100-256GB / FA100-512GB / FA100-1TB / FA100-2TB Capacity: 128 GB / 256 GB / 512 GB / 1 TB / 2 TB Interface: PCIe Gen3 x4, NVMe1.4 Form Factor: M.2 2280 Max. Sequential Reading Speed: 950 / 1950 / 3200 / 3300 / 3150 MB/s Max. Sequential Writing Speed: 650 / 1300 / 2200 / 2700 / 2600 MB/s Random Read Speed: 103K / 202K / 317K / 402K / 375K IOPS Random Write Speed: 158K / 280K / 286K / 261K / 280K IOPS Storage Temperature: -40 ℃ to 85 °C Working Temperature: 0 °C to 70 °C Dimensions: 80 × 22 × 2.3 mm Weight: 6.35 g ± 3 g Limited Warranty: 5 Year or 70 TBW / 5 Year or 150 TBW / 5 Year or 300 TBW / 5 Year or 600 TBW / 5 Year or 1200 TBW
#SSD_NVME#COMPUTERS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#2TB#ACER#FA100#FA100_2TB#M.2#M.2_SSD#NVME
0 notes
Photo
Unitek DiskGuard Raiden SATA III 2.5” Enclosure Model Number: Y-3036 Product Features: With e-sports style design, it is a hard drive enclosure that tailor-made for gamers. Integrated the USB cable with enclosure, easy to use and connect. With user-friendly tool-less design. With LED light indicates the working status. With USB3.0 SuperSpeed data transfer, transfer speed up to 5Gbps. Backward compatible with USB2.0/1.1. Support SATA III (6Gbps), SATA II (3Gbps) and SATA I (1.5Gbps). With UASP (USB Attached SCSI Protocol), accelerates the data transfer speed. Compatible with all 2.5" SATA HDD / SSD with any capacity. Support 9.5mm or below 2.5" SATA HDD / SSD with any capacity. With sleep mode function. Plug and play, no driver installation process needed. Hardware & Dimension: Dimension: 130mm x 83mm x 15mm Upstream: USB-A Male Downstream: SATA6G Cable length / OD: 30cm / 4mm Color: Black Package Contents: 1 x DiskGuard Raiden 2.5" 1 x User Manual
#EXTERNAL_HDD#DESKTOP_COMPONENTS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#2.5_INCH#CAS_USB3_SATA_Y_3036#ENCLOSURE#SATA_HDD#UNITEK#Y_3036
0 notes
Photo
Unitek SolidForce NVMe M.2 SSD 10Gbps Enclosure M.2 NVMe SSD enclosure adapter, totally tool-free. USB C 3.1 Gen 2 10Gbps to NVMe PCIe M-Key(B+M Key) Solid State Drive External Enclosure. It supports UASP Trim for M.2 NVMe SSD Size 2242/2260/2280. Model: Y-S1203ABK SuperSpeed USB+: Adopts USB 3.1 Gen 2 that M.2 Enclosure up to 10 Gbps, capable of performance over 900MB/s read/write when using high-performance SSD. The perfect solution for data transfer and data backup, the actual transfer speed depends on the speed of USB Port type, your computer performance, etc. Backward compatible with USB 3.1 Gen1 up to 5Gbps. Compatibility: Compatible with M.2 NVMe PCIe M Key & B+M Key SSD up to 2TB, applicable to sizes 2242/2260/2280 SSDs. Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Note: M.2 NVMe SSD is not included; Supports Windows, Mac OS, Linux, Android. How to Use: 1. Press the lock button on the product. 2. Pull out the PCBA board. 3. Insert the M.2 SSD diagonally down to the PCIe / NVMe slot. 4. Remove the silicone pad and heat sink from the package. 5. Paste the silicone pad accessories on the M.2 SSD card below. 6. Paste the heat sink accessories on the silicone pad below. 7. Gently press down on the M.2 SSD with your fingers and snap it into the plastic snap-on case. 8. When disassembling, also push the buckle outward to release it. Notes: When installing M.2 SSDs, please be careful of static electricity (it is recommended to place your hands on metal objects to discharge). With the M Key interface which belongs to the NVMe protocol channel. When installing the M.2 SSD for this product, please check the interface and protocol channel of the hard disk. Although the USB port of the product supports hot-swapping when installing M.2 SSD, it must be unplugged all power. When inserting the SSD, should be as gentle as possible to avoid scratching the components on the motherboard. When disassembling the hard disk case, please save all data properly to prevent loss. Since Windows 10 and above and Mac OS are the best compatible with NVMe, this product is recommended to get better transmission performance in Windows 10 or higher or Mac OS system. Upstream: USB-C (Male) Downstream: M.2 NVMe SSD (Female) Dimension: 117.5 x 40 x 13.5mm Cable Length: 30cm Color: Black
#SSD_NVME#DESKTOP_COMPONENTS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#ADAPTER#CAS_USB3_TC_M.2_U#ENCLOSURE#M.2_SSD#NVME#SSD#UNITEK#Y_S1203ABK
0 notes
Photo
Acer FA100 2TB M.2 NVMe Gen3 PCIe SSD THE SPEED TO SUCCEED, WIN AT WORK OR PLAY Built from original high-quality 3D NAND wafers, Acer's FA100 M.2 SSD has become the winner in the marketplace. Making use of its sequential read speed up to 3300 MB/s and sequential write speeds up to 2700 MB/s, the FA100 M.2 SSD handles high workloads efficiently. SAFEGUARDING YOUR DATA, 4K LDPC HIGH-ORDER ERROR CORRECTION FA100 M.2 SSD supports ECC error correction technology and S.M.A.R.T. function, based on 4K LDPC which enables stronger error correction capabilities and improved secure data storage. This effectively reduces data errors that may occur during SSD read and write, avoiding bad blocks for better performance and more reliability. Features: Read speed up to 3300 MB/s 4K LDPC error correction Cost-saving energy efficiency SPECIFICATIONS Model Name: FA100-128GB / FA100-256GB / FA100-512GB / FA100-1TB / FA100-2TB Capacity: 128 GB / 256 GB / 512 GB / 1 TB / 2 TB Interface: PCIe Gen3 x4, NVMe1.4 Form Factor: M.2 2280 Max. Sequential Reading Speed: 950 / 1950 / 3200 / 3300 / 3150 MB/s Max. Sequential Writing Speed: 650 / 1300 / 2200 / 2700 / 2600 MB/s Random Read Speed: 103K / 202K / 317K / 402K / 375K IOPS Random Write Speed: 158K / 280K / 286K / 261K / 280K IOPS Storage Temperature: -40 ℃ to 85 °C Working Temperature: 0 °C to 70 °C Dimensions: 80 × 22 × 2.3 mm Weight: 6.35 g ± 3 g Limited Warranty: 5 Year or 70 TBW / 5 Year or 150 TBW / 5 Year or 300 TBW / 5 Year or 600 TBW / 5 Year or 1200 TBW
#SSD_NVME#COMPUTERS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#2TB#ACER#FA100#FA100_2TB#M.2#M.2_SSD#NVME
0 notes
Text
Unitek USB3.0 M.2 SSD (NGFF/SATA) Enclosure Model: Y-3365 Color: Gray Products Features: Compact aluminium housing, compatible with a variety of sizes of B-Key or M+B Key M.2 SSD (30mm / 42mm / 60mm / 80mm). With USB3.0 Type-C interface, supports up to 5Gbps data transfer speed. It is a reversible plug connector, easy to plug in and out. Backward compatible with USB2.0/1.1. Support UASP and TRIM, maximise the data transfer speed and lifespan of SSD. With a LED light to indicate the working status. With the auto sleep mode function, it saves energy and maximizes the lifespan of the product. Plug and play, hot-swappable, no need to install the driver. Specifications: Product Dimension: 105mm x 40mm x 9mm Upstream: USB-C Male Downstream: M.2 (Female) Cable Length: 30 cm Packaging Content: 1 x USB3.0 M.2 SSD (NGFF/SATA) Aluminium Enclosure 1 x USB-A (M) to USB-C (M) Data Cable 1 x User Manual 1 x Screw (for M.2 SSD) 4 x Screw (for Enclosure) 4 x Screw Cover 1 x Mini Screw Driver Packaging: UNITEK Gift Box
#SSD_NVME#DESKTOP_COMPONENTS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#ENCLOSURE#HDD_USB3_SSD_ENCL#M.2#M.2_SSD#NVME#UNITEK#USB_3.0#Y_3365
0 notes
Text
Unitek NVMe M.2 SSD 10Gbps Enclosure M.2 NVMe SSD enclosure adapter, Unitek aluminum USB 3.2 Gen 2 10Gbps to NVMe PCIe M Key & B+M Key solid-state drive external enclosure supports UASP & Trim, compatible for M.2 M-Key SSD 2230/2242/2260/2280. Model: S1201A Suitable SSD: This M.2 SSD Enclosure only for M.2 NVMe PCIe M-Key & B+M Key SSD. Applicable to sizes 2230/2242/2260/2280 solid-state drives. Does not support M.2 SATA-based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. High Speed: With USB 3.2 Gen 2 interface, supports up to 10Gbps data transfer speed. It's a reversible plug connector, easy to plug in and out. Backward compatible with USB 3.0 and USB 2.0. How to Install M.2 SSD: Remove the screw. Remove the cover. Remove cover and pull out the PCBA. Insert M.2 SSD to PCIe/NVMe slot. Press M.2 SSD down and match the screw slot. Lock M.2 SSD with the screw. Upstream: USB-C (Male) Downstream: M.2 (Female) Product Color: Space Grey Cable Length: 30 cm Product Dimension: 108 x 37 x 9mm Package: 1 x USB3.1 Gen2 Type-C to M.2 SSD (PCIe/NVMe) Enclosure 1 x USB-C (M) to USB-C (M) Data Cable 1 x User Manual 1 x Screw (for M.2 SSD) 4 x Screw (for Enclosure) 1 x Mini Screw Driver
#SSD_NVME#DESKTOP_COMPONENTS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#CAS_USB3.1_TC_M.2_U#ENCLOSURE#M.2#M.2_SSD#NVME#S1201A#UNITEK
0 notes
Text
Unitek SolidForce NVMe M.2 SSD 10Gbps Enclosure M.2 NVMe SSD enclosure adapter, totally tool-free. USB C 3.1 Gen 2 10Gbps to NVMe PCIe M-Key(B+M Key) Solid State Drive External Enclosure. It supports UASP Trim for M.2 NVMe SSD Size 2242/2260/2280. Model: Y-S1203ABK SuperSpeed USB+: Adopts USB 3.1 Gen 2 that M.2 Enclosure up to 10 Gbps, capable of performance over 900MB/s read/write when using high-performance SSD. The perfect solution for data transfer and data backup, the actual transfer speed depends on the speed of USB Port type, your computer performance, etc. Backward compatible with USB 3.1 Gen1 up to 5Gbps. Compatibility: Compatible with M.2 NVMe PCIe M Key & B+M Key SSD up to 2TB, applicable to sizes 2242/2260/2280 SSDs. Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Note: M.2 NVMe SSD is not included; Supports Windows, Mac OS, Linux, Android. How to Use: 1. Press the lock button on the product. 2. Pull out the PCBA board. 3. Insert the M.2 SSD diagonally down to the PCIe / NVMe slot. 4. Remove the silicone pad and heat sink from the package. 5. Paste the silicone pad accessories on the M.2 SSD card below. 6. Paste the heat sink accessories on the silicone pad below. 7. Gently press down on the M.2 SSD with your fingers and snap it into the plastic snap-on case. 8. When disassembling, also push the buckle outward to release it. Notes: When installing M.2 SSDs, please be careful of static electricity (it is recommended to place your hands on metal objects to discharge). With the M Key interface which belongs to the NVMe protocol channel. When installing the M.2 SSD for this product, please check the interface and protocol channel of the hard disk. Although the USB port of the product supports hot-swapping when installing M.2 SSD, it must be unplugged all power. When inserting the SSD, should be as gentle as possible to avoid scratching the components on the motherboard. When disassembling the hard disk case, please save all data properly to prevent loss. Since Windows 10 and above and Mac OS are the best compatible with NVMe, this product is recommended to get better transmission performance in Windows 10 or higher or Mac OS system. Upstream: USB-C (Male) Downstream: M.2 NVMe SSD (Female) Dimension: 117.5 x 40 x 13.5mm Cable Length: 30cm Color: Black
#SSD_NVME#DESKTOP_COMPONENTS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#ADAPTER#CAS_USB3_TC_M.2_U#ENCLOSURE#M.2_SSD#NVME#SSD#UNITEK#Y_S1203ABK
0 notes
Text
Unitek DiskGuard Raiden SATA III 2.5” Enclosure Model Number: Y-3036 Product Features: With e-sports style design, it is a hard drive enclosure that tailor-made for gamers. Integrated the USB cable with enclosure, easy to use and connect. With user-friendly tool-less design. With LED light indicates the working status. With USB3.0 SuperSpeed data transfer, transfer speed up to 5Gbps. Backward compatible with USB2.0/1.1. Support SATA III (6Gbps), SATA II (3Gbps) and SATA I (1.5Gbps). With UASP (USB Attached SCSI Protocol), accelerates the data transfer speed. Compatible with all 2.5" SATA HDD / SSD with any capacity. Support 9.5mm or below 2.5" SATA HDD / SSD with any capacity. With sleep mode function. Plug and play, no driver installation process needed. Hardware & Dimension: Dimension: 130mm x 83mm x 15mm Upstream: USB-A Male Downstream: SATA6G Cable length / OD: 30cm / 4mm Color: Black Package Contents: 1 x DiskGuard Raiden 2.5" 1 x User Manual
#EXTERNAL_HDD#DESKTOP_COMPONENTS#STORAGE#LAPTOP_COMPONENTS#LAPTOP_STORAGE#ELECTRONICS#CABLES_CONVERTERS#USB_STORAGE#2.5_INCH#CAS_USB3_SATA_Y_3036#ENCLOSURE#SATA_HDD#UNITEK#Y_3036
0 notes