#I've watched videos

[sesshy380]

Two more things crossed off my cosplay to-do list! All that's left is my wig (which I have scheduled to work on tomorrow), and assembling the parts to the Ring. That part I'm scared to mess up because I've never worked with epoxy before, so I have no idea what I'm doing. Hoping hubby and I will have a free day that lines up soon so he can help me. Once the spines are bonded and put in place, it's just a matter of painting and I'll be set.

[elizabro]

please consider how you engage with aaron bushnell's death. you may react to it as you will, but it's crucial to remember that his death was specifically a call to action. it was not meant solely to shock but to draw attention to a vast moral hypocrisy: that to many, a soldier dying in a campaign backed by the U.S. government is noble, even if the soldier kills innocents to do so, even if the cause is morally bankrupt--but this? this is insanity. a man taking his own life, on his own terms, in an attempt to help others while hurting nobody else, is somehow less rational and more horrifying than the mass killing of civilians.

of course aaron's death was horrific. but as he said beforehand, it is realistically no more horrific than what's happening in gaza. if we can't stomach this, then why can we stomach children being bombed? thousands being starved? for all that self immolation is, it brings death in a matter of minutes. it is a fraction of the amount of pain, fear, and grief that people in gaza are experiencing. it's just that we are able to quantify it. and this tiny, quantifiable sliver of horror is still so unbelievably awful. how can anyone bear to think about anything else when this horror is happening a millionfold in palestine? this is the question aaron bushnell was asking. and he wanted you to face it, head-on, watching him burn to death.

I've been seeing people make fanart. minimalist graphics to sell on t-shirts. to commodify his death, to mythologize it not a day afterwards, is not only in poor taste but a hindrance to his message. the answer is not commodification, nor is it defeatism, nor is it rejoicing in his death. if you want to honor aaron's legacy, take action. channel your horror and your outrage into making a material change. this wasn't about him. this was about palestine. remember that it was always about palestine.

[bkdkhrts]

the closet is GLASS

[eidolonetchings]

this is canon

[helmip]

✨🌟star light, star bright🌠✨

[eggplantgifs]

Team Japan: 2022 Beijing Olympic Figure Skating Team Event Silver Medalists

Congratulations to Kaori Sakamoto, Wakaba Higuchi, Yuma Kagiyama, Shoma Uno (absent), Riku Miura, Ryuichi Kihara, Misato Komatsubara, and Tim Koleto! 🥈

[andsewingishalfthebattle]

Novice sewing pattern: Cut out shapes. Line up the little triangles on the edges. Stitch edges together. We've also included step-by-step assembly instructions with illustrations.

Novice knitting pattern: yOU MUSt uNDerstANd thE SECret cOdE CO67 (73, 87, 93) BO44 (63, 76, 90) 28 (32, 34) slip first pw repeat 7x K to end *kl (pl) 42 * until 13" (13, 13, 15) join new at 30 pl for 17 rows ssk 27 k2tog mattress lengthwise BO and sacrifice a goat to the knitting gods. WHAT DO YOU MEAN YOU WANT "INSTRUCTIONS," I JUST GAVE THEM TO YOU

[valeriapryanikova]

eye hands

[temeyes]

he really looked like he was gonna vomit tho,,,

[inkedberries]

have you met my goth gf daniil dankovsky????? he has a medical degree

[carnival-phantasm]

MOST DISTURBING FOREST ENCOUNTERS.....NUMBER ONE:

THE GOUGER!!!

[yukipri]

We had the first big snow of this winter yesterday! So I had to bring some in for the Boys.

Ace has always loved snow (though it didn't snow enough last year to stick), but the baby Cream Puffs (Cody and Rex) were born this past spring, so this is their first time seeing it at all! They don't know how they feel yet ^ ^;

Cats tag: #YukiPriASLKittens

[caramelldansenu]

how michael afton got hired

[aethersea]

I've always wanted to learn bookbinding, ever since I was a wee little nerd, but there are a lot of things I've always wanted to learn, and this one has both a daunting upfront materials cost and a daunting upfront research cost. however, my sister is a jewel among siblings and gave me for christmas last year a handy dandy bookbinding manual, a block of good paper, and a little bag of tools.

but I still didn't have a suitable workspace, nor any of the many important tools and materials that she didn't include in her gift. so I just read the manual and pined. until maybe a month ago I got fed up with pining, flattened a cardboard box for a cutting mat, and went to town.

and I'm real proud of myself, so here's me rambling, plus photos!

I went to the thrift store and got glue + some fabric to bind the cover, went to Michaels for a paintbrush (and later went back for a metal ruler lmao it's amazing how useful it is to have a straightedge for cutting the paper), and...could not find material for the cover boards. so I went home and pined some more. but the urges were too strong, so after a couple hours of moping I got a stack of printer paper at the grocery store (I could not bring myself to use the good paper for my first, inevitably weak attempts, I just couldn't do it) and started making a little booklet. which was a great idea, it turned out, since it makes for good practice with cutting the paper, measuring things, punching holes in the signatures, etc.

I have a big box of greeting cards from Michaels, which I used for the covers. it didn't feel like I was making a Real Book, so I got some colored paper from the stationery store and used that for end papers.

so fancy~

galvanized by this success, I ordered a stack of chipboard online to use for cover boards; and once I was confident that I could cut paper without making it look too stupid (getting that straightedge ruler sure helped lol), I made signatures out of the good paper, left them under some heavy books overnight since I don't have a book press, and then punched holes in them! (huzzah for this nice video on getting the holes right)

my sister's gift included good linen thread. it's unwaxed, but after some poking around on r/bookbinding it looks like that just means I'll have to be more careful to avoid tangles and keep good tension. I am fine with this. I can be extra attentive. (I considered just running it over a beeswax candle, but one commenter said if your wax has paraffin in it, it could melt in a hot car, ruining the spine. I can't guarantee my candle is 100% beeswax, I didn't make it, so maybe we just move on.)

I don't have good linen fabric to use for the tapes, but the important part there is that the fabric be thin, sturdy, and not stretchy. the probably-cotton I got from the thrift store fits the bill, so it'll do!

this is a french link stitch, which I got from this exceedingly good tutorial. apparently it's strong enough on its own that for a book of this size, I don't actually need tapes, but I'd already cut the things so eh here we are. and tapes plus french link will make it a stronger binding still (according to a friendly redditor on r/bookbinding), so we carry on.

specifically we carry on to the gluing step. now as I mentioned, I do not have a book press, and you....kinda need one for this step. you need to hold the book block in place with the signatures facing upwards, pressed together hard enough that the glue won't run down between them and stick the pages together (though you do want the glue to get between them just a little, just for like a 16th of an inch). you at least need some clamps and a couple boards to sandwich the book block with.

but you know what? I'm not a professional, this is my first ever book, if it's a little bit off it'll be fine. so we grab all the heaviest books off the bookshelf and improvise.

it's fine! I'm sure it's fine! and just in case it's not, I've tucked a bit of cardboard underneath to catch any glue that drips down so it won't land on the floor. see? I'm prepared! I'm acing this.

and actually, it really was fine. I used clear elmer's glue, applied with a flat paintbrush from the art supplies aisle at Michael's, and frankly I liked the way the flat paintbrush let me slip glue in between the signatures. I did poke around on a couple bookbinding sites to see what kind of glue I should use, and the gist is that although there are better options than this, elmer's glue is perfectly serviceable, and the main downside is it's not archival grade. but I don't need my first bookbinding attempts to last 200 years, that's fine.

the next step is to add the mull. mull is a specific type of fabric – extremely loose-weave linen – and the idea is to paste it down over the spine to essentially hold the tapes and signatures all in place in relation to each other.

but I don't have mull! so I'm using more of the thrift store probably-cotton, because it's thin enough and not really stretchy at all. I'm sure this will be fine too. I painted a layer of glue onto the spine, then left it to dry a bit while I measured and cut the fabric, then painted a generous stripe of glue down the center, where it'll affix onto the spine. then I added a bit more glue to the spine, just to be sure, and pressed the mull into place, rubbing it thoroughly to make sure it's firmly affixed to every signature, with no creases in the fabric or air bubbles beneath it.

honestly I might have overdone it on the glue. I've never done this before, I don't know! I think it's okay, though – I tried not to ever let it become a thick layer, just a slight coating, since the danger of too much glue is that it might crack once dry and weaken the spine.

and now we leave it in the press overnight to dry, and pick up the next step in the morning!

[lilybug-02]

My contribution to the Animator Vs Animation community 😔🙏

[correct-hermitcraft-quotes]

Etho: Alright everybody, we are... gathered together here... to get married.