#Huawei MA5800

[rodrigocarran]

Adicionando ONT Huawei HG8245 e ONTs de Terceiros na OLT Huawei MA5800-X15

Neste guia, vou mostrar como adicionar a ONT Huawei HG8245 e outras ONTs com WiFi de fabricantes terceiros na OLT Huawei MA5800-X15 com firmware R018. Abordaremos desde a criação de perfis de serviço até a adição de ONTs não registradas. 1. Acessando o Modo de Configuração Para começar, precisamos acessar o modo de configuração na OLT. Execute os seguintes comandos: enableconfig 2. Criando o…

[cloudinfotech-01]

Huawei Olt Price | Cloud Infotech

The term Huawei OLT price describes the price of Huawei's OLTs which are used in fiber-optic communication networks to link different kinds of subscriber devices to the main network. With varying capacities and settings, Huawei provides a selection of OLT devices, such as the EA5801 and MA5800 series.

[tommylye]

Huawei SmartAX MA5800 10G-PON Board CGHF, CSHF, CGUF, XGHD, XGSF,  XGSF, CGID, XSED is applied to Huawei SmartAX MA5800 series OLT  MA5800-X17, MA5800-X15, MA5800-X7, and MA5800-X2. MA5800 10G-PON Board works together with the optical network unit (ONU) to provide GPON or 10G GPON access service.

[joyfulengineerland]

H901GPHF

The H901GPHF board a 16-port GPON OLT interface board.lt works together with ONU to provide the GPON acess service. Apply to Huawei MA5800 series, MA5800-X2, X7, X15, X17

Forwarding capability: 40Gbit/s

Max. split radio: Class B+: 1:64; Class C+/++： 1:128

B+ SFP Module Optical Power: 1.5 dBm~5 dBm, Receiver Sensitivity: -28 dBm

C+ SFP Module Optical Power: 3 dBm~7 dBm, Receiver Sensitivity: -32 dBm

C++ SFP Module Optical Power: 6 dBm~10dBm, Receiver sensitivity: -35 dBm

Class B+/C+: Tx:2.49Gbit/s Rx:1.24Gbit/s

Class C++: Tx: 2.488 Gbit/s, Rx: 1.244 Gbit/s

Maximum Frame Size:

2052 bytes 9216 bytes (jumbo frame enabled)

T-CONTs per PON port: 1024

Maximum number of MAC addresses: 131072

Service flows per PON board: 16368

Operating Wavelength: Tx: 1490 nm, Rx: 1310 nm

Standards Compliance: ITU-T G.984.1, ITU-T G.984.2, ITU-T G.984.3, ITU-T G.984.4

[bettytelecomate]

https://www.telecomate.com/h906cghf-xgpon-gpon-board.html

Huawei MA5800 series 16-port XG-PON and GPON combo OLT Interface Board with XG-PON & GPON N2a Optical Module

[hongtelecom-blog]

Huawei MA5800 Video Service Processing Board H901CVEC

Huawei MA5800 Video Service Processing Board H901CVEC

Huawei OLT MA5800-X2/X7/X15/X17 Flex-PON Interface Board H901FLHF

Huawei OLT MA5800-X2 Price

Huawei OLT MA5800-X7 Price

Huawei OLT MA5800-X15 Price

Huawei OLT MA5800-X17 Price

Video Service Processing Board

Video service processing board , together with the downstream cable media converter (CMC), processes digital video broadcasting (DVB) services.

H901CVEC Board Description

[seelunzikun]

Huawei CGID 10G 8 port Service card interface board XG-PON Board for MA5800 X17 X15 X7 X2 OLT, HUAWEI H901CGID board for MA5800 OLT 8 ports GPON card CGID with 8 SFP+ 10G modules,Huawei Board,Board. You can get more details about from mobile site.Huawei XSHF H901XSHF H902XSH 16-port XGS-PON OLT interface board ... with the optical network unit (ONU) to provide XGS-PON access services.

[sundermonica]

Huawei MA5800-X17 is on sale! https://www.telecomate.com/huawei-ma5800-x17.html

[craigbrownphd-blog-blog]

Authoritative UK Organization Recognizes Code and Build Engineering of Huawei OLT Product MA5800

Huawei's optical line terminal (OLT) product MA5800 was recently analyzed by another authoritative UK organization. In its security assessment report, the organization praised the MA5800's firmware highly, noting the high-quality software code and reproducible build capability of the firmware. http://bit.ly/36EkaXq

[tommylye]

Huawei MA5800 X2 NG OLT H901BPSB subrack, belonging to Huawei SmartAX MA5800 series OLT products

[tommylye]

Huawei GPHF service card version difference

H901GPHF

H902GPHF

H903GPHF

Huawei 16-port GPON Board for MA5800 series OLT

[thunderlinkcom]

How to troubleshoot the fault when the IPTV service is not smooth

The ONU uses the IGMP mode to deploy the IPTV service. The multicast duplication point is on the Huawei MA5800 OLT. After the service is deployed, all IPTV services of the set-top boxes (STBs) connected to the ONU are not smooth. Network topology:

Possible Cause

The STB is faulty.

The data configuration is incorrect.

The downlink bandwidth of the ONU is insufficient.

A network fault exists.

A fault exists on the upper-layer switch.

A fault exists on the ONU.

A fault exists on the OLT.

Procedure

Connect the STB to another ONU. The fault is not detected. This indicates that the STB is not faulty.

Connect a PC directly to the ONU and test the download speed. The download speed is 5 Mbit/s. This indicates that the fault is not caused by the bandwidth configuration.

On the ONU, ping the IP address of the BRAS. No packets are lost. This indicates that the fault is not caused by the network.

Test the IPTV service on the upper-layer switch. The service is normal. This indicates that the fault is not caused by the upper-layer switch.

Check the configuration data on the OLT. It is found that the MAC address aging time is changed to 10s. The default MAC address aging time is 300s. It is possible that the number of unknown unicast packets is too large and the IPTV service of the ONU is not smooth because the MAC address aging time configured on the OLT is different from that configured on the MA5616.

Run the mac-address timer command to change the MAC aging time on the OLT to 300s. After the modification is complete, the IPTV service becomes normal.

Suggestion and Summary

The default MAC aging time is 300s on either the OLT and the ONU. You are advised not to modify the default value because the inconsistency in the MAC address aging time configured on the OLT and the ONU may generate a lot of unknown unicast packets and affect the service.

[thunderlinkcom]

Disable the automatic loopback release function on the U2000

Hi, everyone!

As we all know, U2000 NMS plays an important role in our system control and maintance, Huawei DWDM OSN8800, Huawei SDH OSN3500, Huawei OLT MA5800 etc... all need U2000 Network Management Software, so today I'm going to introduce you how to disable the automatic loopback release function on the U2000.

Problem Description

The loopback function is often used during fault diagnosis. The U2000 automatically releases the loopback, which affects fault locating. Therefore, you need to disable automatic loopback release on the U2000.

Handling Process

On the U2000, choose Configuration > NE  Batch Configuration> Automatic Disabling of NE Function.

In the Automatic Disabling of NE Function box, search for the target NE and modify the parameters that forbid automatic release of loopbacks, as shown in the following figure.

Root Cause

The automatic loopback release function of the NE can be configured on the NMS. For details, see the handling process.

Solution

On the NMS, we can disable automatic loopback release.

To facilitate fault locating, you can disable automatic release of loopback on the NMS. However, it is not recommended that you disable automatic release of loopback unless otherwise required. This prevents line interruption caused by forgetting to release loopback.

That's all.

Welcome to leave a message and discuss. If you have any problems, please contact us at sales@thunder-link.com. We are happy to solve them for you!

[hongtelecom-blog]

Huawei MA5800 10GE/GE Optical Interface Board H901OXHD H901OXEG

Huawei MA5800 10GE/GE Optical Interface Board H901OXHD H901OXEG

Huawei OLT MA5800-X2/X7/X15/X17 Flex-PON Interface Board H901FLHF

Huawei OLT MA5800-X2 Price

Huawei OLT MA5800-X7 Price

Huawei OLT MA5800-X15 Price

Huawei OLT MA5800-X17 Price

10GE/GE Optical Interface Board

10GE/GE optical interface board works with Ethernet optical network terminals (for example the ONT supporting GE upstream, MxU and lanswitch) to provide Point-to-point (P2P)…