#GlassInc

[glassincatlanta]

WINDSHIELD PITTING AND WHAT YOU CAN DO ABOUT IT

It is summer in Atlanta, GA, and that means you will most likely be washing your car at home or taking it to an automated carwash. If you intend on using a pressure washer or a drive-through wash, it is crucial to be aware of any existing damage on your windshield glass. The high-pressure water jets used to clean your vehicle can make existing damage, like windshield pitting, even worse. If you aren't careful, you may need windshield replacement or repair sooner than later. Within this post we will look at windshield pitting, how it affects your vehicle's windshield and the proper way of repairing it.

Windshield Pitting

Windshield pitting is a normal form of windshield damage that happens whenever contaminants from the road such as sand, dirt, rocks, and other debris impact a vehicle at speed. The debris is abrasive, and gradually it wears down the surface of the glass. Vehicles that are used everyday and automobiles driven at higher speeds will experience windshield pitting quicker since they are frequently exposed to the elements and other activity. Unfortunately, aside from not using a vehicle, nothing can be done to avoid windshield pitting.

An easy way to tell if your windshield is pitted is to look through it when light is shining on it. If it creates a glare, then the glass is pitted. It is very important to keep track of the condition of your glass. Left unchecked, a pitted windshield can become difficult to see out of, making it a safety hazard. Additionally, your windshield is an important part of your vehicle's safety system, and it is crucial to keep it clean so you can be safe on the road.

The Problem with Polishing Pitted Glass

If your windshield is pitted you may be wondering, can it be repaired? Yes and no. Depending on how serious the pitting is, it may be possible to restore the surface of the glass. That being said, restoring a pitted windshield is no easy task. It is very time-consuming and requires special tools and rubbing compounds. Glass restoration services use buffers and polish on the glass to remove the damage, but a windshield replacement is always the best choice. Polishing the glass can weaken it and cause it to become uneven. This can jeopardize its safety performance and distort the view through the glass. Experienced auto glass shops, like Glass Inc., do not polish pitting and encourage complete windshield replacements.

Replacing a Pitted Windshield

Small cracks and chips can ordinarily be fixed, but as formerly stated, the proper way to address a severely pitted windshield is to perform a complete windshield replacement. Depending on the size and shape of the glass, a windshield replacement can range from $200 to upwards of $1500. In addition, driver assistance technologies, like lane departure warning systems, can increase the cost because the systems require recalibration, and the replacement is more involved.

If your windshield has minor cracks or chips, auto glass shops can ordinarily deal with these types of damage by applying a bonding resin that will fill the area. Once the resin has cured under an ultraviolet light source, the damaged glass becomes fused. In some instances, this option can have great results because the repair is transparent and it is virtually undetectable. However, using bonding resin to perform a repair ultimately depends upon where the damage is located. Occasionally, the repair can distort the view through the glass. Therefore, if the damage were directly in the line of sight of the driver, resin would not be an appropriate repair option.

Windshield pitting may not look like a huge problem but it can become a safety hazard for you and other motorists this summer. If you are planning on a road trip or just going out and about, it is a great time to examine your vehicle's windshield condition to check for pitting and any other damage. Debris from the road, high-pressure car washes, busy traffic and windy conditions can cause existing damage on your windshield to become an even bigger problem. If you discover windshield pitting, chips, or cracks, Glass Inc. can assist you with a repair or complete windshield replacement. Our company offers mobile repair and replacement services along with on-site services at our office. Call us today or request a free estimate online.

Read more. 

[allstateautoglassinc]

Get Your Windshield Replacement Done From Allstate Auto Glass Inc.

Have you noticed that there is a chip or crack in your car’s window glass? Are you ignoring it simply because you cannot find time to get it repaired or replaced? If your answer is yes then there is a need to get windshield replacement service without wasting any more time. For getting this service, you should only trust a professional company that can guide you for your vehicle with utmost efficiency and effectiveness. Selecting the right company for it may be a tough task for you. You might need to waste a lot of time researching all the companies. So, to make it easier for you, we have found the best company for you. It is Allstate Auto Glass Inc. It has been known as one of the most preferred windshield repair companies in the industry. This company has become the industry leader by always accommodating the needs and requirements of its customers. There are several other reasons behind it. Some of them have been listed below: • They have been working in this industry since the year 2000 and all their technicians are highly qualified and certified. By repairing the glass of so many vehicles, they have gained extensive experience in this field. • They understand that replacing the glass is important for your safety. They have access to the glass of almost all companies. So, they can easily replace the glass of your vehicle with authentic glass anytime you need it. • After getting your window glass installed by them, you will get a warranty on it that will be valid till the time you own the vehicle. So, you do not have to worry about it after getting it installed from their company. • They also accept insurance from almost all insurance companies. So, when you reach their location, they will take care of your insurance paperwork completely. Allstate Auto GlassInc. also takes pride in providing windshield repair replacement services on the same day. They provide their services 24 hours a day and 7 days a week. So, whenever there is an emergency, you know whom to contact. Their team is committed to providing a seamless and hassle-free experience to every customer. Their services would provide you with the utmost comfort and peace of mind. They also offer special discounts to different groups of people. So, if your windshield or window glass is damaged then you should contact the experts of Allstate Auto Glass Inc. immediately. For more information, visit https://www.allstateautoglass.net/

Original Reference: https://bityl.co/9Ibl

[autoglassshopphoenix]

RT https://t.co/A9L7l8hcOp RT https://t.co/rD348k1Ipr HOW TO EFFECTIVELY CLEAN YOUR WINDSHIELD AND AUTO GLASS #WindshieldReplacement #WindshieldRepair #GlassInc. #HowToCleanAWindsh… https://t.co/QqKftQ0yrN

RT https://t.co/A9L7l8hcOp RT https://t.co/rD348k1Ipr HOW TO EFFECTIVELY CLEAN YOUR WINDSHIELD AND AUTO GLASS #WindshieldReplacement #AutoGlass #WindshieldRepair #GlassInc. #HowToCleanAWindsh… pic.twitter.com/QqKftQ0yrN

— Melieh Glenn (@meliehglenn) April 23, 2019

Source: @meliehglenn April 23, 2019 at 11:47AM More info Windshield Auto Glass Repair and Replacement

[glassincatlanta]

GLASS INC. ON-SITE ELECTROSTATIC PAINTING

Metal surfaces on buildings, railings, gates, fences, and signs subjected to severe weather like UV rays and moisture, can prematurely deteriorate and rust if they are not appropriately protected from the elements. If your home or business needs painting, do not settle for typical paint and application methods. These result in poor quality finishes, require extended periods of drying time, and will certainly need yearly touch-ups. For the most durable and complete protection, electrostatic painting is the preferred solution for your home, office, or store.

Electrostatic Painting

Initially, electrostatic painting was adopted in manufacturing facilities to paint metal items such as machinery and motor vehicles because of its quality finish, efficiency, and speed. The basic idea of electrostatic painting is that the paint is attracted to the painting surface like a magnet is attracted to a metal surface. The applicator machine positively charges the paint. It is then applied onto a metal surface that is grounded with a negative charge. As a result of the positive and negative charges, the paint is attracted directly to the metal surface and creates a consistent coat across the object. This cannot be achieved with conventional paint and spray applicators.

Ransburg No. 2 Applicator

The development of mobile or on-site applicators have made this innovative technology accessible for commercial and residential jobs. Glass Inc. uses the Ransburg No. 2 as its preferred electrostatic paint applicator. The machine attains a transfer rate of 95%. It is the most advanced and efficient applicator for on-site electrostatic painting on the market.

The Features of Electrostatic Painting

Electrostatic painting is very effective, and it accommodates a variety of metal items. Frequent electrostatic paint projects include metal storefronts, railings, doorways, stairs, signs, buildings, gateways, fences, outdoor furniture and machinery. Here are a few of the benefits of electrostatic painting when compared to standard paint and applicators.

Electrostatic painting achieves a quality finish and even coat due to its unique method of application.

The finish is not porous. This makes the coating less susceptible to staining, and it is easy to maintain.

Since the paint is only drawn into areas with a negative charge, it considerably reduces overspray and wasted materials.

Basic and customized paint options are available.

Electrostatic paint is much more durable than standard paint. The finish protects against deterioration from the elements for several years.

Items generally only require one coat, and the paint does not drip or clump together.

Application is quick and drying time only takes a couple of hours.

It is minimally disruptive to your home or business.

Electrostatic painting does not require an oven to cure paint like powder coating.

Jobs can be completed on-site with mobile units like the Ransburg No. 2.

It is eco-friendly compared to traditional paint because of its low VOC emissions.

Electrostatic painting is the best solution for safeguarding and reconditioning your business or home. If you have a metal project that needs painted, speak with the team at Glass Inc. The company services Atlanta, GA, and has the experience and machinery to help you with all of your electrostatic coating needs. To get a free estimate or to schedule an appointment, contact our office today!

Read more here. 

[glassincatlanta]

EMERGENCY BOARD UP SERVICES

Glass Inc. emergency board up services for commercial and residential properties are now readily available for Atlanta, GA, and surrounding areas. Whenever weather disasters, accidents, and emergency situations occur, buildings and homes are susceptible to significant damage, and their windows and entrances are usually structural weak points. They need reinforcement to secure a property and prompt repair to prevent additional damage. These situations can be difficult and make you feel vulnerable, but Glass Inc. is standing by and prepared to help!

Preventative and Subsequent Services

Whether you are preparing for an emergency or you are the victim of a disaster or crime, Glass Inc.'s board up services can help you safeguard your business or home quickly. Our emergency board up services are available for situations including vandalism, burglary, crime scenes, vehicle impacts, fires, storms, architectural damage, and more. Regardless of your situation, Glass Inc.'s team is equipped with the expertise and building materials to respond promptly to an occurrence. We have immediate availability, and you can get in touch with us twenty-four hours a day, seven days a week. Additionally, Glass Inc. can work directly with your insurance company.

Emergency Board Up Process

If you are worried about your building's security because of weather or crime or you have been the victim of an incident, the very first step you should always take is to contact your insurance company to ensure coverage. Sometimes, you may also need to contact law enforcement. Doing so will help you correctly coordinate your property's board up. After getting in touch with your insurance provider, call Glass Inc. We will come to the location quickly and assess the structure or the damage. After the assessment, our service technicians will secure the building by boarding up the windows and doors. All the openings and accessible entry points will be barricaded with exterior grade plywood, anchors, and braces. Depending on your building or home, there may be different plywood mounting options. Following the board up of your property, our team will clean up the debris from the damage, like shards of glass, to minimize potential hazards. Once your building has been boarded up, you will have peace of mind and be able to coordinate the necessary repairs with less stress and worry.

FEMA Board Up Materials

Not all board up services are the same. Glass Inc. does not use particleboard, waferboard, masonite, or other comparable materials. To provide properties with the best security and protection, Glass Inc. utilizes the materials recommended by the Federal Emergency Management Agency (FEMA) in its publication, Board Up Procedures. Our building materials include exterior grade plywood, construction-grade lumber braces, construction-grade nuts, washers, carriage bolts, galvanized or stainless-steel ring-shank nails, and comparable deck nails.

Unfortunately, weather disasters, crime, and accidents happen. When they damage your business property or home, it is not uncommon to get overwhelmed and anxious, but you can take measures to protect against additional damage. Emergency board up services are ideal for the moments following a disaster or in preparation for one. Boarding up your building's access points will effectively secure your building while also being cost-effective. To receive an estimate or an immediate repair, contact Glass Inc. today.

Click here to learn more. 

[glassincatlanta]

GLASS INC. MANUFACTURERS PROTECTIVE SHIELD BARRIERS FOR FRONT-LINE WORKERS

As the COVID-19 Pandemic continues to be a threat to the health and wellness of our country, equipment to help shield against its spread is in very high demand. Items like face masks, hand sanitizer, gloves, and protective shield barriers are being utilized to help defend against the airborne virus from spreading in areas that are densely populated. One business specifically, Glass Inc. in Atlanta, GA, is making use of its knowledge and expertise to modify their existing products to help guard the health of front-line workers and citizens.

Since 1956, Glass Inc. has been providing Atlanta, GA with commercial, residential, and automotive glass solutions. Recently, the business has begun to develop protective shield barriers with their custom-made glass and aluminum railing systems. The aluminum railings are typically used for stairways or balconies in commercial or residential applications. However, Glass Inc. is repurposing their custom glass and aluminum railings for sites where transactions occur or where employees interact with consumers, such as cash registers and check-out counters, concession stands, front desks, reservation desks, waiting rooms, and drive-throughs.

In order to help the community, the business has recently donated their custom aluminum protective shield barriers to a variety of businesses as the state looks to reopen. According to Glass Inc.'s founder, Larry Love, "We are proud to be able to offer a solution that helps protect front-line workers and our community against the spread of the Coronavirus."

Glass Inc. understood the importance of adapting to the present environment and recognized that their custom-made glass and aluminum railings would be useful for reducing the spread of COVID-19 while Georgia reopens. They are ideal for drugstores, municipal buildings, restaurants, venues, arenas, gas stations, supermarkets, and banks. As opposed to putting up a piece of plexiglass in your business, consider ordering custom-built protective shield barriers from Glass Inc.

Unlike a hanging piece of plexiglass that stands out like a sore thumb, their protective shield barriers have a number of advantages. Glass Inc.'s protective shield barriers are custom made so they can accommodate virtually any dimensions. The railings are offered in a variety of styles so they can complement or seamlessly integrate into the aesthetic style of your office or business. Top rails are not required and the barrier's glass can be upgraded with treatments that can enhance the style, allow for more privacy, or bolster security. Finally, the barriers are professionally installed so they will fit correctly and they are considerably more durable than a flimsy piece of plexiglass.

It is uncertain as to when the COVID-19 pandemic will end and the country can return to some form of normalcy. In the meantime, as states are attempting to reopen, it is critical that businesses and government agencies take every action feasible to help guard their employees and customers from the virus. Custom protective shield barriers are an excellent solution to shield front-line workers and customers from getting the airborne virus. If you are interested in mounting protective shield barriers at your business, Glass Inc. can help. Give them a call today and begin designing your custom protective barriers.

Learn more here. 

[glassincatlanta]

GLASS INC. RESPONSE TO THE CORONAVIRUS

As the world is concentrated on fighting the Coronavirus pandemic, Glass Inc. is also taking steps to ensure a healthy work place. We take the health of our customers and associates seriously. Measures are being implemented to help slow the spread of the Coronavirus while conducting business in accordance with the directions from the Centers for Disease Control and Prevention (CD). Glass Inc. is dedicated to supporting the needs of our customers while working to prevent transmission of the virus and maintaining a healthy operation.

As of May 2020, the CDC has revised its Interim Guidance for Businesses and Employers Responding to Coronavirus Disease 2019 (COVID-19). The published guidance serves to help businesses plan, prepare, and respond to the Coronavirus disease while safeguarding the health of customers, employees, and communities.

Since May 6, the updated practices and suggestions include: carrying out daily health checks, performing a hazard assessment of the workplace, encouraging employees to wear cloth face coverings in the workplace, if appropriate, incorporating policies and practices for social distancing in the workplace, and improving the building ventilation system. As of May 21, there have been three updates to the guidance. They involve updated cleaning and disinfection guidance, updated best practices for carrying out social distancing, and updated strategies and recommendations that can be implemented now to respond to COVID-19.

Our company is carefully monitoring guidance and developments from the CDC and authorities. Here are a couple of the measures that Glass Inc. is taking to safeguard the health and well-being of our customers, employees, and the community.

A Clean Workplace

Regardless of the pandemic, we recognize that keeping our workplace well-maintained is not only professional, but it is essential to support the health of our employees and customers. Therefore, we keep the office and shop maintained and organized.

Social Distancing

According to the CDC, social distancing is an ideal way to minimize face-to-face contact and more importantly reduce the spread of the COVID-19 virus. As a result, we ask that customers and employees please stay 6 feet apart. This measure will reduce the chance of exposure to the virus.

Sneeze Guard Barriers

To protect against exposure and decrease face-to-face contact, our shop has built custom made barriers for our office. They contain viral mucus and droplets from coughing and sneezing; which in turn protect individuals. Additionally, Glass Inc. is consulting with local government agencies and private businesses to manufacture custom barriers out of our special glass and aluminum railing systems.

For more information with regards to the virus and ways to guard you and your family from it, please go to the CDC's website. There is an abundance of updated information and facts and guidance that will help you navigate these challenging times as safely as possible.

The Coronavirus has significantly affected our world, but we must adapt and not lose hope. Glass Inc. cares about our community, our customers, and our staff members. We are striving to provide a safe work environment and prevent the coronavirus from spreading. As we move forward, we will closely monitor the guidance from the CDC and execute applicable new guidance as it is published.

Click here to learn more. 

[glassincatlanta]

GLASS INC. CUSTOM BI-FOLDING DOORS

Bi-folding doors by Glass Inc. are a great feature for new constructions and also a great upgrade if you are thinking of renovating your home, business, or restaurant. They will transform the appearance and atmosphere of any entrance, exit, seating area, living room, office, deck, or balcony. These special doors are available in a variety of styles and offer significant advantages over traditional sliding glass doors. Made from premium aluminum and glass, our bi-folding door systems are custom built to last. Read about the features of our bi-folding door systems below.

Bi-Folding Door Features

Opening and Closing The custom door systems offered by Glass Inc. are able to be easily opened inward or outward while folding. This ability greatly improves visibility while also increasing space for entertainment and seating capacity. The systems also utilize adjustable door jambs to provide exceptional fitment.

Glass Options and Glazing Specialty glass, decorative glass, and energy-efficient glass are available when designing a door system. Glazing adds additional glass panes to the doors. This feature can improve security and also reduce the transfer of heat. Glazing options are available in single, double, or triple thickness.

Energy Efficiency The energy efficiency of the door systems is dependent on the type of glass and door set selected. Systems are available in fully weathered specifications and also general configurations. Fully weathered is optimal for ensuring the energy efficiency of a room or space. Opting for additional treatments to the glass can greatly maximize the system's ability to conserve energy also.

Custom Finishes Glass Inc.'s bi-folding doors are assembled from uncoated aluminum metal that naturally has as a mill or raw finish. It is easy to add color to the material by powder coating it prior to assembling the system. Powder coating is available in all RAL colors which offer a variety of colors and gloss levels.

Hardware The door handles are designed with style in mind and are available in five standard finishes. The finish can be color coordinated to match or select a different finish and color to create a distinct accent.

Security and Locking The glazing process for our doors works from the inside out so you can expect a very high level of security. The locking system is composed of dedicated shootbolt intermediate locks operated by low projection handles. Additionally, the pass doors incorporate standard levers that latch, hook, and lock with dedicated strike plates. Doors taller than 2500mm have the option to add a top shootbolt for additional security and weather sealing. The doors are also lockable with a key.

Weather Sealing Our custom doors have exceptional weather sealing capabilities with the use of a mix of weather plies and specially designed perimeter gaskets. The seals help to create a strong and durable barrier that contains climate-controlled air and stops outside air and elements from entering inside.

Configurations and Sizing The best way to understand what configurations and sizing options are available to you is by speaking with Glass Inc. The number of doors and size depends on the site conditions such as the location, use for the doors, wind loads, and other variables.

Upgrade your business or home with Glass Inc.'s bi-folding doors and experience the indoor and outdoor flexibility. Our door systems are reliable, functional and offer modern exterior and interior styling. To see what configurations are available for your property, call us today!

Learn more here. 

[glassincatlanta]

BI- FOLDING DOORS AND ALUMINUM RAILINGS BY GLASS INC.

Are you tired of your old sliding glass door from the 1970s? Is your wood railing falling apart? Do you want to open a space for entertaining or incorporate a beautiful view in your dining area? Sliding glass doors and old fashioned railings are a thing of the past. Glass Inc. now offers bi-folding doors and aluminum railings for commercial and residential applications. These products are great for updating the design or curb appeal of new or existing constructions. Here is some information about these products and how they can help enhance your home, business, or restaurant.

Glass Inc.’s Bi-Folding Doors  

Bi-folding doors from Glass Inc. are the perfect option for transforming an existing room or patio area. Our systems easily give you the versatility to turn almost any area into a closed or open setting. These doors are ideal for creating more space and getting rid of barriers for unobstructed views. Bi-folding door systems improve comfort by allowing for additional natural light and fresh air. They can be fitted with different types of glass or glass treatments that can improve the energy performance of your room, increase its ability to shield from inclement weather, or add additional security and privacy.

Glass Inc. bi-folding door systems are custom built for every project so they can accommodate specific applications including existing constructions, new constructions, retrofitting, and remodels. The door systems are offered in a number of colors and finishes, enabling them to seamlessly integrate into the style of your building or home. Some of the door material choices include fiberglass, aluminum, aluminum-clad, and even wood.

Benefits To Bi-Folding Doors

Transforms a room or patio into an open or closed environment

Increases comfort with fresh air and natural light

Custom built for an assortment of applications and sizes

Great for existing constructions, new constructions, retrofitting and remodels

A large selection of colors and finishes are available

Can be upgraded to strengthen security, climate protection, or energy efficiency

Folding doors increase space and seating capacity for entertaining

Aluminum Railings

Aside from bi-folding doors, we also offer modern aluminum and glass railing systems. These railings will give you a modern look, improved visibility, safety, functionality, and they are very customizable with a range of architectural possibilities. While older railings corrode and deteriorate, our aluminum and glass barriers require less maintenance and they are much more durable. Glass Inc. aluminum railings are readily available for both residential and commercial applications. Our aluminum railings can be fixed to wood or concrete, so they are ideal for balconies, decks, or even rooftops. The railing systems are very stable and they provide outstanding wind protection. The pickets come in square and round options and the rails can run horizontally or vertically. Before you invest time and money repairing, painting, and sealing your old railing system, you should definitely think about upgrading to glass or aluminum.

Railing Features

Wind protection

Glass and aluminum

Safety and security

Improved visibility

Contemporary styling

Interior and exterior applications

Assortment of picket and railing options

Top-rail and mid-rail configurations

Durable

Mountable to different surface materials

Spring is just around the corner and it is the best time to update your sliding glass doors, deck, porch, patio, or balcony with Glass Inc. bi-folding doors and aluminum railings. If you are wanting to enhance the look of your home, shop, or restaurant look no further. Let us help you with our folding door systems and railing solutions. Our products are custom built and professionally installed. To find out more or to start designing your doors and railings, give us a call and receive an estimate today!

Click here to learn more. 

[glassincatlanta]

RESIDENTIAL GLASS TYPES AND USES

Residential glass is much more than just simply windows and doors. There are various types of glass and different applications associated with them. They can be used to increase personal privacy and safety in a residence, enhance the design of a room, or improve the energy efficiency of a home. To help you understand your needs and choices, here is a list with information on glass frequently requested by our clients for residential projects.

Insulated Glass

Insulated glass doors and windows are used for their energy efficiency. Keep in mind that different brands are rated at different performance levels. In general, they are composed of two or three panes of glass and argon gas is placed in between the panes. Argon is used to reduce the transfer of heat through the glass. This gas is not harmful to people or pets in the event of a crack, it is also odorless and colorless. In addition to argon gas, insulated glass also has a desiccant component to prevent condensation build-up. If you have a window fogging up in your home, the seal is probably leaking and the window should be repaired or replaced.

Safety and Security Window Film and Laminated Glass

These are used for their strength and ability to shield people. Safety or security window film is regularly used in environments with strong storms to protect against flying debris such as tree limbs. Laminated glass is manufactured with intense heat and pressure. Two panes of glass are fused together with a thin layer of polyvinyl butyral between them. The advantage of these products is that they contain shattered glass and protect people and structures from harm.

Tinted Glass

Tinted glass is dark or considered to be colored glass. It is unique in that it can come in a variety of shades and colors. While people often associate it with automotive glass, tinted glass is a terrific solution for added security in residential and commercial uses. Not only does it diminish heat and glare, tinted glass also enhances privacy and protects people and interiors from hazardous UV rays. Customers have also requested tinted glass for visual purposes.

Obscured Glass

Obscured glass is normally used for privacy purposes. This type of glass enables light to transfer; however, it can not be seen through clearly. For example, frosted, etched, and coated glass are all types of obscure glass. It is used primarily in bathrooms, doorways, and garage doors. 

Mirrored Glass

Mirrored glass is exactly what it sounds like. The glass appears to be reflective as a result of a metal coating and protective sealant applied to one side. The coating creates a mirror effect. This type of glass is ordinarily used for decorative applications on pieces such as walls, doors, and furnishings.

Float Glass

Float glass gets its name from the manufacturing process used to produce it. Molten glass is floated on top of molten tin and produces extremely smooth and thin large panels of glass. Its uses include insulated glass, windows, doors, tabletops and shelves. It is also inexpensive and colorless.

Low-Emissivity Glass

Low emissivity or Low-E refers to a surface condition that gives off low degrees of thermal energy. Therefore, low-emissivity glass reflects thermal radiation or UV rays and it is used in buildings for its energy efficiency performance. The coating on this type of glass is unique because in the winter season it reflects heat back into a house and in the summertime, it reflects heat away from a house. The initial cost for Low-E glass is high but over time you will spend less on heating and cooling your home. Lastly, this type of coating can appear to have a tinting effect, so research which kind you would like before it is installed in your house.

There are a number of different types of residential glass to pick from. It can be overwhelming if you are not certain what your project or application calls for. Glass Inc. is here to help and has been providing Atlanta, GA with residential glass services for over 40 years. No matter if you are building a new construction, renovating your home, or in need of a replacement piece, Glass Inc. can assist you with all of your glass needs. Contact us today to receive a free quote for your property.

Find out more here.

[glassincatlanta]

RANSBURG NO.2 PORTABLE ELECTROSTATIC PAINTING

Electrostatic painting was originally applied in manufacturing facilities to coat vehicles and various other types of equipment. The coating process efficiently coats a surface with the use of positively charged particles. Over time, the coating processes' technology has evolved and portable units are now available. Compared to the stationary systems found in manufacturing facilities, mobile devices from companies like Ransburg make on-site application possible.

Ransburg No.2 Electrostatic Painting Portable Unit

Formerly resurfacing was limited to standard paint methods. This involved intensive labor, expensive materials, environmentally hazardous emissions, poor quality finishes, and disruption to property owners. In addition, items that could not be resurfaced on-site would need to be taken apart and delivered to a paint facility.

The advancement of mobile electrostatic painting equipment has had a major impact on commercial and residential construction by bringing the modern finishing process on-site. Ransburg's advanced mobile system, known as the No. 2, is the most efficient applicator for on-site electrostatic painting available.

Due to its efficiency, productivity increases and operators do not experience fatigue. Applicators also attain higher quality finishes because unlike traditional resurfacing methods, the No. 2 has an incredibly high transfer rate of 95%. The high rate translates into cost savings since projects are completed faster and they also use less material.

Ransburg No.2 Applications

Mobile electrostatic painting can be used on metal, wood, plastic and ceramic surfaces. Some surfaces call for additional prep work.

Typically, electrostatic painting is used to coat:

Storefronts

Signs

Gates

Fencing

Railings and Bars

Lockers

Outdoor Furnishings

Elevators

Window Frames

Cabinets

Outdoor Design Elements and more!

Electrostatic painting is a great way to freshen up the appearance of a property. It also adds outstanding shielding to coated surfaces. Glass Inc. now offers mobile electrostatic painting services with the industry-leading Ransburg No. 2 mobile unit. If you are looking for painting services call us today and receive an estimate.

Read more here. 

[glassincatlanta]

ELECTROSTATIC PAINTING WITH GLASS INC.

Electrostatic painting is a modern coating system provided by Glass Inc. in Atlanta, GA. The coating process is unique in that it applies atomized fluoropolymer paint to a surface and uses an electrostatic field to adhere the polymer paint. This type of e-coating has a number of benefits over regular painting methods. Two of its main advantages are that it is more effective and economical. It is applied primarily on metal however it can be applied to some types of plastics and other materials with additional prep work. Here is an introduction to the technology, the application process, and its benefits.

Electrostatic Painting Technology

Originally, electrostatic painting was used mainly in factories where it was adopted to coat car bodies or various other pieces of machinery. It became a standard in those applications as a result of its productivity. In recent years, the technology has evolved and it has also been adopted in commercial construction and residential applications with the use of mobile systems. The mobile systems apply the same technology from the factories but enable teams to do projects on-site. Commercial business sites utilize the coating process for everything from storefronts, to ceilings, elevators, window frames, signage, railings, and gates. Residential uses include gates, gutters, furniture, fencing, and various exterior designs.

How Does Electrostatic Painting Work?

Prior to painting, the item to be painted is grounded or also known as "earthed". This provides it a negative charge and is partially responsible for generating a static field during application. Soon after the object is grounded, the painter will then apply paint (fluoropolymers) with the use of a special electrostatic spray gun. The gun then atomizes the paint particles with a positive charge as the item is sprayed.

The paint then reacts like metal shavings drawn by a magnet. Whenever the positively charged paint particles are sprayed, an electrostatic field is created in between the grounded target and the paint. This field acts as a boundary for the paint and focuses it around the object. This attraction between the paint and target produces a wrap-around coating effect. Since the paint is positively charged it is attracted to the earthed object and it then clings to it, completely coating the surface.

Advantages to Electrostatic Painting

Here is a list of the notable benefits to electrostatic painting over powder coating and other conventional painting methods:

The paint evenly coats surfaces and hard to reach places as a result of its wrap-around effect.

Electrostatic paint produces a durable and reinforced bond on objects. Compared to traditional paint, it is incredibly hard to peel and crack.

The coating method is convenient because it is fast drying and cures overnight. Therefore, it is less disruptive to a business or residence.

On-site application with mobile units: Unlike powder coating, electrostatic painting does not require an oven to cure the paint.

It also requires less maintenance and improves protection from environmental factors and cleaning chemicals.

The methods transfer rate is 98% so less paint is wasted and objects are fully coated.

Electrostatic painting is more eco-friendly because of its low VOC emissions.

It is economical because less time and material is required.

The thickness of the finish is easily regulated.

There is a wide selection of paint colors and finishes to select from.

Electrostatic painting is a cutting-edge coating process that offers a consistent coating and shields pieces from the environment while offering a high-quality finish. Its ability to be applied on-site makes the application ideal for commercial sites and residential projects alike. Are you thinking about resurfacing a construction or item? Take a look at electrostatic painting first! Glass Inc. specializes in the e-coating process and can assist you regardless of the size of your project. If you are interested in electrostatic painting for your company or residence, contact Glass Inc. today.

Read more here. 

[glassincatlanta]

CDC RECOMMENDS SNEEZE GUARDS IN BUSINESSESS

Businesses around the country are taking measures to help protect against the spread of the coronavirus by installing sneeze guards. Due to the nature of many businesses, carrying out social distancing can be a challenge, so sneeze guards have become an effective way to safeguard employees and customers from spreading the airborne virus.

COVID-19 - AN AIRBORNE CONTAGIOUS RESPIRATORY DISEASE

According to the CDC, the novel coronavirus (COVID-19) is a contagious respiratory illness that has not been formerly identified. Anybody can experience minor to serious symptoms, but older adults with severe underlying medical conditions are at the highest risk of developing serious complications from COVID-19. The virus is believed to spread between people via respiratory droplets after an infected person coughs, sneezes, or talks. The droplets are inhaled by other people in close proximity, and they become infected as a result of their nose or mouth coming into contact with the virus. The CDC also specifies that COVID-19 is more likely to spread in close contact environments when people are less than six feet apart.

To protect against COVID-19, the CDC posted How to Protect Yourself & Others on their website. Since it is believed to be an airborne virus, their first suggestion is to avoid exposure to the virus completely. They also suggest regular hand washing, social distancing (at a minimum, staying at least six feet apart), covering your mouth and nose with a mask when near other people, cover your mouth and nose when coughing or sneezing, clean and disinfect high traffic surfaces, and monitor your health every day.

SNEEZE GUARDS

Along with these suggestions, the CDC has also published Public Health Activity Guidance. In the guidance, the CDC encourages setting up partitions for social distancing and physical barriers such as sneeze guards. Sneeze guards are ordinarily a clear piece of glass or plastic placed in-between areas where transactions occur. These shields are designed to help minimize the transmission of respiratory illnesses by shielding against infected respiratory droplets when a person coughs, sneezes, or talks. By mounting sneeze guards, employees and customers have added protection while conducting business, and the chances of contracting a virus are decreased.

CUSTOM GLASS INC. SNEEZE GUARDS 

At the moment, Glass Inc. is retrofitting its custom glass and aluminum railing systems to produce sneeze guards. Their sneeze guards are custom-built in Atlanta, GA, and combine the highest quality components.

Their product begins with precise measurements. Once your counter or desk measurements are taken, the glass shop then identifies the proper mounting points for the aluminum frame. The sturdy frame is securely attached to the mounting surface and is extremely strong. In addition, the aluminum frame has a variety of customizable features so it can blend in with the aesthetic design of your office or business.

Clear plastic sheets are frequently used for sneeze guards but the acrylic material scratches very easily, and maintaining it can be challenging because it requires specific cleaning cloths and chemicals. With that in mind, Glass Inc. uses tempered glass because of its scratch resistance, and it is very easy to maintain. Also, tempered glass has outstanding clarity and strength and can be upgraded with glass treatments such as tint or safety film.

As businesses reopen, they need to take every measure to help protect their employees, customers, and communities. One step that many are taking is to install sneeze guards in their offices and stores. Sneeze guards are a simple way of giving a level of physical protection and peace of mind in the course of the public health crisis. If your business is in need of sneeze guards, call Glass Inc. today!

Read more here.

[glassincatlanta]

BEVELED GLASS FROM GLASS INC.

Are you looking for a piece of custom beveled glass? If you are, look no further because Glass Inc. in Atlanta, GA provides services for residential custom glass and beveled pieces. Our shop can help you with table tops, vanity mirrors, architectural pieces, cabinet doors and more. Here is an overview of beveled glass, its applications, and how its made.

WHAT IS BEVELED GLASS?

Beveled glass is a piece of glass or mirror that has a consistent tapered edge cut all around its border. The interior area of the glass stays the same thickness while the tapered edges create a frame-like appearance. The edges can be left unfinished or they can be polished to give the piece a smooth style. Bevels can also create a prism effect on glass. They can capture sunlight and produce a spectrum of different colors that would normally not show up on float glass. Stained glass windows or pieces with patterns are normally made of beveled glass.

WHAT IS BEVELED GLASS USED FOR?

This style of glass has an assortment of different uses. These consist of tabletops, decorative pieces, mirrors, suncatchers, panels, architectural pieces, cupboard doors, accessories, and framing. Beveled glass is a great option for a room's focal point. Many homeowners or business owners will have pieces made for a dining room or lobby wall. Single rectangular mirrors in a master bath are also commonly replaced with two beveled mirrors for a more attractive look. Other typical uses of beveled glass include tabletop pieces for dining tables or smaller items like bedside tables.

HOW IS BEVELED GLASS FORMED?

Initially, beveled glass was handcrafted with the use of a roughing wheel, sand, water, and polishing stones. It was an incredibly labor-intensive process and called for a seasoned glazier. The glass would be held against a roughing wheel to slowly taper the edges. It would then be polished and buffed. The quality of the stones used was very important in the process. If they did not meet the correct specifications, the glass would end up being damaged and the glazier would have to start over.

These days, the process is automated with the use of machines and they have the ability to produce more, much quicker. The manufacturing of beveled glass begins with a piece of float glass that usually ranges between a 1/8 to 1/4 inch thick. The glass used can be textured or clear. Unlike the handmade crafting method, today manufacturers use plastic-based metal deburring wheels. These wheels are more efficient and create extremely smooth surfaces.

BEVELED GLASS BY GLASS INC.

Glass Inc. only uses the highest-quality glass to produce custom beveled glass pieces. Our shop is able to deliver on small and large projects. Along with the glass itself, various mounting options including L molds, J molds, and decorative clips are available. These add form and function to a glass piece or mirror by adding to the look and also by helping to make it more secure. If you have questions or need a custom piece, call us today!

Read more here.

[glassincatlanta]

THE ADVANTAGES OF AUTOMOTIVE WINDOW TINTING

Automotive window tinting provides drivers and passengers with a number of advantages. Apart from its application to change the appearance of a vehicle, it also offers health benefits, enhances visibility, increases safety, and protects the interior of a vehicle. Here is a rundown of these benefits and why you should consider having your vehicle's windows treated.

Automotive Window Tinting and Healthy Skin

Spending extended periods of time in your vehicle during a work commute or just sitting in traffic increases your skin's exposure to harmful UV rays. While auto glass helps to guard you from UVB rays it does not protect against UVA rays. These rays can accelerate signs of aging and lead to skin cancer. Furthermore, they are harmful even when the sky is cloudy.

Did you know that the Skin Cancer Foundation suggests window tint as effective protection against these rays? In fact, automotive window tinting film can block 99% of UVA rays. By installing window tint on your car, you can protect your skin and preserve your health.

Improved Visibility

The proper window tint percentage will also greatly improve your visibility when driving. The film is not only able to darken auto glass but it also greatly diminishes any glare from the sun. Reduced glare is less irritating to eyes and helps you to see oncoming vehicles, pedestrians, and hazards much faster.

Added Safety

Auto accidents happen and it is always good to be as prepared as possible. In case of a crash, automotive window tinting also creates an additional level of protection. Untreated glass can shatter and cover you and your passengers. However, treated windows help to contain the glass and greatly reduce the amount of glass fragments flung into a vehicle.

Personal Privacy

Window tint film comes in a number of different shades. It can be incredibly dark similar to a limo or very lite to reduce glare. Opting for a dark shade is a great solution for added privacy inside a vehicle. Dark tint percentages can help conceal valuable cargo and can be a good defense to any nosey passerby.

Reduced Interior Heat

Automobiles parked directly in the sun or sitting in stop-and-go traffic become extremely hot inside with untreated glass. Installing window tint is an effective way to make your car or truck's interior much more comfortable since it deflects heat. High-quality films from companies like 3M can reduce the ambient temperature in a vehicle by 47 degrees without the AC on!

Interior Protection

Is your vehicle's interior fading? This is likely due to regular sunlight exposure over a period of time. The next time you purchase a vehicle make sure you have tint installed immediately, especially if you live in Georgia. Applying the film to your vehicle's windows will serve as a barrier and prevent seats, dash panels, and carpet from fading.

Automotive window tinting can improve the look of a car or truck, but it also has several additional benefits. It helps you to stay healthier and safer while also making your vehicle a more comfortable place to be. Glass Inc. now offers automotive window tinting services in Atlanta, GA. If you are considering having tint installed on your automobile, speak with the specialists at Glass Inc. today!

Read more here. 

[glassincatlanta]

COMMERCIAL AND RESIDENTIAL WINDOW TINTING WITH GLASS INC.

Natural sunlight provides beauty and function to the interior of a property. However, constant exposure to it is hazardous to occupants and furniture. Furthermore, the heat transferred into a structure can increase energy costs. Commercial and residential window tinting by Glass Inc. is the most effective way to enhance the performance of windows on any construction while also adding protection to its occupants.

The Problems With Untreated Glass

Untreated glass creates a number of problems. These include excessive glare, heat, and high-energy bills. Frequent exposure to sunlight's ultraviolet rays is also very hazardous to people's skin. According to the Skin Cancer Foundation, it can accelerate signs of aging and even cause skin cancer.

These harmful rays are also very destructive to furniture inside an office space or residence. Gradually, the energy transferred through the glass results in fading.

Untreated windows also make it more challenging to manage the climate inside a building. In the summer, air conditioning systems have to work overtime and in the wintertime, heat escapes through the glass. Treating windows with window tinting film is an excellent solution to these problems.

Advantages to Commercial and Residential Window Tinting

Ultraviolet Light Protection

Window tinting film reflects heat off a window and it is mainly used due to these shielding capabilities. The film provides protection to people, hardwood floors, furniture, fabrics, paintings, photos, and even wallpaper. It's able to block 99% of harmful UV rays and the Skin Cancer Foundation suggests it as one of its recommended safeguards.

Climate Control

The high-performance film used by Glass Inc. rejects 78% of the heat that transfers through a window. Window tinting film acts similarly to a double-pane or tipple-pane piece of glass. It insulates a structure and contains heat in the winter or cool air in the summer. This translates into reduced energy costs and a much more comfortable environment for occupants.

Privacy and Security

Window tinting film can add security to a property also. It comes in a range of different shades; so darker tint can be used for privacy. There is also state-of-the-art security window film that can hinder threats from breaking in. The film is incredibly hard to break through and it protects people against shattered glass. This technology is also used to guard against severe weather conditions.

Decorative Film

Window film can also be decorative. It is offered in several colors and styles that imitate cut and texturized glass. Transforming the look of glass with decorative film is cost-effective since it prevents owners from having to replace existing glass.

Reducing Glare

Window tinting reduces eyestrain caused by light entering through windows. It is great in offices or entertainment areas since it reduces glare and makes screens more visible.

Commercial and residential window tinting is a cost-effective window treatment service offered by Glass Inc. in Atlanta, Georgia. Applying window tinting film to a property protects the building and its occupants while also lowering energy costs. It is offered in a number of styles and shades so it can have decorative and security qualities. Call Glass Inc. today to get an estimate for your business or home.

Click the link to read more.