#Class 1 Grade B8M Hex Bolt

[roll-fast]

Stainless Steel Hex Bolt and Nuts and its Grades | Roll Fast

Roll-fast manufactures bigger diameter bolts & nuts in stainless steel grades in A4-70, A4-80, B8, B8M Class 1 and class 2, SS316S31, A4-70L and A4-80L as per ISO 3506-1. The Stainless steel hex bolts & nuts are made from a steel alloy that contains a minimum of 10.5% Chromium and is also referred to as Inbox steel. We are the pioneers in manufacturing stainless steel bolts & nuts for the petrochemical industries.

visit source URL : https://www.roll-fast.com/industries-served/petrochemical-industries/stainless-steel-bolt-nut.html

[mylesjude]

Know All About the A193 B8m -A prefect Stainless steel

A193 B8m specifications are used in oil and chemical structure applications. ASTM standards cover high-temperature or high-pressure stainless steel and alloy steel such as B7 bars. STM A193 carbonless and stainless steel rods and bolts are used to connect flanges, valves, pressure vessels, and fittings to high temperature and high-pressure services.In 1936, specificationA193 B8m was approved. This specification is commonly utilized in structural applications in the petroleum and chemical industries. Fasteners for pressure vessels, valves, flanges, and fittings are included in this specification. This material is often available at thread pitches, but for use in conventional applications, threads larger than 1 inch are specified as eight threads per TPI).There are several grades to the A193 specification with different chemical compositions, mechanical properties, and high temperature properties. The most common grade in the A193 specification is Class B7, but there are several others.Fasteners based on Spec A193 are commonly specified, manufactured, and supplied as heavy hexagon bolts or threaded rods and bolts (weekend thread bolts). The carbon steel flanges manufacturers in india offer a series of bent bolts (U, L, or J), threaded rods at one or both ends, and heavy, non-hexagonal head bolts. All screws, rods, and bolts must be flushed.ASTM A962 is a related standard that covers a set of general requirements related to A193. Section 13 of the A962 specification corresponds to the shape and class of the wire. The threads must be in accordance with ASME B1.1, Class 2A, and can be cutting or coil type. If the diameter is 1 inch or less, the National Unified Coarse (UNC) thread chain is used, and if the diameter is larger than 1 inch, the 8UN (8UN) thread chain is used unless otherwise stated.CoatingCertain grades of fasteners made with ASTM A193 (hot-dip galvanized, mechanically galvanised) or F1941 (mechanically galvanized) can be galvanized (cold or electro-galvanized). Teflon, xylan, and PTFE coatings are also often utilized with A193V, in addition to cadmium coatings.Product labelThe quality code and the stainless steel carriage bolt manufacturers‘ identification information both apply to the screw head and one end of the threaded rod and bolt. Section 17 of the A193 B8m specification describes the omission of product marks on the fasteners and the tolerance for marking very small diameters elsewhere, but rarely the work. Dual grade marks are permitted as long as the fasteners meet all the requirements of both specifications.Dimension exampleUnless otherwise stated, plug screws must be dimensional heavy hexagons covered with A193 B8m. A193 rods and bolts are typically measured from first thread to first thread instead of full length, including the sloping ends.The high tensile fasteners manufacturers in india can manufacture all kinds of fasteners such as studs, hex bolts, flange bolts, flat nuts and washers, flange nuts and spring washers, non-standard products.Durable and strong fasteners for customers at the most competitive market prices in the world. The stainless steel flanges manufacturers in india manufactured a wide range of hex nuts and bolts under the best guidance and gained the highest reputation.