#China booth construction

[chronicleexhibits]

Trade Show Booth for FHC Shanghai 2023: Making a Lasting Impression

Trade shows provide an incredible platform for businesses to showcase their products, connect with potential customers, and stay ahead of industry trends. When it comes to participating in the FHC (Food & Hospitality China) Shanghai Global Food Trade Show in 2023, having an exceptional trade show booth is crucial for making a lasting impression. In this blog post, we will delve into the…

[rikeijo]

Today's translation #528

Yuri!!! on Life official guidebook, Toshiharu Mizutani (Art Director) interview

Part 5.

-- A lot of scenes take place abroad - was there anything that was difficult to draw because of that?

M: The restaurant they eat at in China. The partition between booths wasn't a wall, but a latticework. I was expecting it would be fine to make it a wall, but I was told that it should be "as it is in the reference materials". But my staff was working so hard and had already created resources for that. I'm used to draw everything by hand, so it's not that I wouldn't think about drawing something like that, but I'd rather choose to simplify it. But if we have the resources then we can later on put them together as needed.

-- Did your impression of figure skating change compared to before you started working on the project?

M: It's an occupational disease - I usually start to collect related stuff with every new project. This time, too, I bought a lot on Amazon. There was that American movie "Ice Castles" in old and new version, so I watched both and other movies like that, too.

-- To observe how rinks look like.

M: Yeah. Fences, the ice, lights and the construction of the building. It was quite fun to do that. Fun, but at the same time I was thinking "It's such a bother that I have to do that..." (laugh). But in Yuri!!! on ICE the composition of the story was very good, the action and emotions, and the local colors of every place were also featured, in addition to athletes working hard to achieve their goals - it was very good. A lot of fun stuff. I was working, while looking forward to the new episode every week.

[goodtripsblog]

Batangas State University - TNEU celebrated the 120th founding anniversary.

ICYMI: Cardinal Gaudencio B. Rosales, the archbishop emeritus of Manila together with Fr. Juan Carlos Coloso presided the Holy Mass on the first day of the 120th Foundation Anniversary celebration of Batangas State University-The National Engineering University Pablo Borbon campus held at Gov. Feliciano ‘Sanoy’ Leviste Memorial Multipurpose gymnasium, Oct. 18. Attendees of the mass included the family members of Don Pablo Z. Borbon, senior and junior officials of Pablo Borbon and its extension campuses, faculty members, employees and students. An ecumenical and interreligious prayer service led by Rev. Felix Zaide was also held right after the mass.

#BatStateUat120

Afterwards, Fr. Coloso officiated the blessing of the newly constructed four-level parking lot attended by officials, teaching, and non-teaching personnel as they lighted candles to signify their participation to the event.

via Helen Olarde, Sheryl Ann Rogel

Photos by Allyza Sandoval, Christian Joseph Umali, Brian Marco Umbao

#TraditionAndInnovation #PabloBorbonLegacy

ICYMI: Farm to Pablo Borbon Market Fair dubbed 'Barakahan' officially opened as part of the three-day celebration of 120th Founding Anniversary of BatStateU-The NEU spearheaded by Dr. Charmaine I. Triviño, Vice President for Academic Affairs, Dr. Daryl M. Magpantay, Vice Chancellor for Research, Development and Extension Services, Dr. Lucille D. Evangelista, Vice Chancellor for Academic Affairs, and Dr. Vaberlie P. Mandane-Garcia, Director for Extension Services at the University grounds, October 18.

In adherence to Sustainable Development Goal 2: Zero Hunger, 17 trade fair participants including local farmers, artisans and university staff showcased freshly produced products and crafts with the aim of promoting healthy living while celebrating agriculture as well as fostering connections between the Pablo Borbon community and local agricultural producers.

On the other hand, adjacent to the Farm to PB booths, Student Organizations Fair also opened with eight participating stalls. Generated income will be used to support the indigent students and other related activities.

The trade fair will continue selling products and exhibiting crafts until Friday, October 20.

via Marish Joy Layas, Ma. Alona De Chavez

Photos by John Lester Manimtim, Ian Sayne Macasaet

IT'S A WRAP!

Here are some of the top stories for the second beat of BatStateU-The NEU's 120th Founding Anniversary Celebration:

• BatStateU-The NEU expresses gratitude to External Partners for empowering students

Dr. Jennifer Manalo, Head of the Scholarship Central Office, initiated the gratitude-filled gathering by acknowledging the honorary representatives from 29 partner institutions including CHED, DepEd Batangas City, DOST, Philippines S&T Development Foundation Manila Inc., China Philippines Silk Road Institute Foundation, and more.

Keynote speakers, Chancellor Expedito V. Arcoda and Atty. Noel Alberto Omandap, highlighted the university's unwavering commitment to improve the lives of students hailing from over 50 regions.

Dr. Rowena R. Abrea, the Vice Chancellor for Development and External Affairs, concluded the ceremony with a hopeful vision of strengthening partnerships and achieving even more remarkable milestones in the future.

via Alyssa Jed Matibag

Photos by Vijian Arcia

• Red Spartans sparkle in first-ever Research Elevator Pitch Competition on SDGs

The Sustainable Development Office held the first Scholarly Pitches Advancing Research Knowledge towards Sustainability (SPARKS) at the CITE Lecture rooms, October 19 joined by students from different departments and constituent campuses.

Winners included groups from the College of Teacher Education, Integrated School, and College of Arts and Sciences. Their projects covered topics like digital literacy for the Aeta community, natural oil spill absorbents, and resource extraction as a response to the call of SDGs.

via Mhykaella Mendoza and Lauda Leyma

Photos by Marianne Alacar

• Anniversary Extravaganza: Student orgs illuminate campus with knowledge, creativity

The university grounds remained in motion as the student organizations showcased their unique initiatives in sharing information and interaction with the red and white community, October 19.

The College of Medicine offered blood typing services, while BioMaSS provided free access to biology knowledge through book selling, as CRIMSOC demonstrated precision shooting. The campus continues to thrive with vibrant activities and the spirit of knowledge sharing.

via Marish Joy C. Layas

Photos by Trisha Nelle Cortado

• Barakahan ng Borbonian: PB Grounds Turn into a Shoppers' Paradise

With the goal of promoting local products and building relationships, local vendors once again gathered at the PB Grounds and transformed it into a shopper’s paradise showcasing products such as fresh produce, sweet delicacies, and unique Mangyan tribe items, October 19.

via Danica Pasco

Photos by Lindsey Alvarez

• Local artists pump up Red Spartan Community

In a thrilling night of music and celebration, over 2,300 students from different colleges attended the ‘Shaking Grounds’ event featuring Maki and This Band at the Governor Feliciano "Sanoy" Leviste Memorial Gymnasium as part of the 120th Founding Anniversary of BatStateU-The NEU.

via Ma. Salveangeline Capistrano

Photos by CJ Umali

It sounds like you're interested in hearing about experiences related to Batangas State University 120th foundation. School foundations are organizations that support educational institutions by raising funds, providing resources, and offering various forms of assistance.

If you're looking for personal experiences, I'd be happy to share a general example. For instance, some individuals have volunteered or worked with school foundations, helping to organize fundraisers, manage finances, or even contribute their expertise in areas like marketing or event planning.

[candy-floss-crazy]

Few of the funfair rides you see today are as iconic as Ferris Wheels, or Big Wheels as they are also known. Taking its name from the wheel built for the World's Columbian Exposition in Chicago, 1893 by George Washington Gale Ferris. Though William Somers installed three fifty foot wooden wheels in 1892 so perhaps they should be called Somers Wheels. Then again Pietro Della Valle, a Roman traveller wrote of riding a Great Wheel in Constantinople in 1615, so should they be Constantinople wheels or Della Valle Wheels? Whoever deserves the naming rights, it was George that actually ended up adding his name to one the enduring legacies of the funfair industry. Lets take a look at some of the weird and wonderful wheels around the world. The Original Ferris Wheel The original 'Ferris' wheel pictured here was 80.4 metres high, 264ft if you are sticking to olde measures, not sure how many cubits that is if you are even older than Imperial measurements. It was intended to rival the Eiffel Tower which had formed the centre piece of the Paris Exposition. The axle weighing 71 tonne was the world's largest forging at that time, and the ride had a carrying capacity of 2160 people, unrivalled today Indeed the world's biggest wheel the Vegas High Roller managing a little over half that. The Vegas High Roller Currently the world's highest wheel is the Vegas High Roller. At 550ft (158.5 metres, 366.67 cubits) high, this beats the Singapore Flyer by a scant 9ft. Rotating on two custom designed spherical bearings each weighing just under 9 tonnes. The passenger cabins are electrically rotated to maintain a smooth level ride and each weighs 20 tonnes. A wheel currently being built in Dubai should claim the crown as world's tallest wheel if it ever opens, currently construction is 5 years behind schedule. The Vienna Riesenrad Located inside the Vienna Prater (the world's oldest amusement park), the Riesenrad was constructed in 1897. This has unique old fashioned cabins, one of which can be hired complete with dining and a champagne meal. It was designed by Harry Hitchins and Hubert Cecil Booth, a pair of British engineers, and constructed by Lieutenant Walter Bassett Bassett an English engineer. to celebrate the Golden Jubilee of Emperor Franz Josef I. At 212ft high it is nowhere near the 'big' wheels out there, but it adds a touch of class all its own. The Tianjin Eye Observation Wheel Also called the Tientsin Eye, this is a mid height wheel at 394ft, what makes it unusual, is that it is the only major wheel actually built on a bridge, in this case the Yongle Bridge, over the Hai River in Tianjin China. The Osaka Wheel This is an oddball in the wheel world. Rather than being round it is an oval shape. The main structure doesn't move rather the cars move around a track. The Big O Situated in the Tokyo Dome City, Japan. This is not only the world's largest centreless wheel at 200ft high (it has an actual roller coaster built through the middle), it also has a number of cars with karaoke machines fitted. We are not actually convinced that being stuck on a ride for 30 minutes with someone singing badly is a great move. Baseball Ferris Wheels Not particularly large, but certainly novel. Built in Comerica park, downtown Detroit. The location of the Detroit Tigers Major League Baseball Team. The Waggon Wheel No, not a biscuit, though legend has it that the biscuit was a similar size before inflation kicked in. This is located in Flamingo Land Amusement park here in the UK. Themed around the iconic plains wagons of old America. YeeeHaaa The Golden Reel Figure 8 Located in Macau, this is one of the highest wheels in the world. Not due solely to its size, but to the fact that it is actually built to join two hotels together. You board on the 23rd floor, and what makes it even more unique is that fact that it is a figure 8 wheel, having 2 loops does that make it Ferris Wheels? Royal Tyres Wheel The Uniroyal giant tyre wheel created for the 1964 New York World's Fair. Now located in Michigan this 80ft high wheel was designed by the same firm responsible for the Empire State Building, Shreve, Lamb & Harmon. Driven by a 100hp engine the wheel carries 96 passengers. John Kormeling Wheel Created by the artist John Kormeling, this is one wacky wheel. Instead of gondolas for the passengers, it has flat structures that you actually park you car on, yes, you don't even have to leave your car to ride this wheel. The Priyat Big Wheel This wheel isn't particularly tall, or have any unusual features. Oh, except for being quite close to a major nuclear disaster. The wheel is virtually brand new having hardly been used before Chernobyl went tits up. It isn't one we would recommend visiting, although there are actually companies now running tours to the area around Chernobyl. Eccentric Wheel These are an uncommon version of the wheel. Instead of the cars being suspended on axles at the ends of the arms, they travel on a track that zig zags inside the main structure, so they slide towards the centre of the wheel then away from it. There was one built in 1920 at Coney Island, and another at one of the Disney parks. Underground Ferris Wheels A mere 65ft high and only 6 cars would make this a pretty poor example for Ferris Wheels. Until you consider it is actually underground inside a giant salt mine. Located in Turda, Romania, the mine dates back to the 13th century and is 368ft beneath below ground. I guess that technically makes this the world's lowest wheel! Read the full article

[smartgen]

SmartGen | Appearance at ComVac ASIA 2024

On November 5, ComVac ASIA 2024 grandly opened at the Shanghai New International Expo Center. As one of China’s most renowned events in compression technology, ComVac ASIA stands as a flagship gathering for Asia’s compressor industry. This year’s exhibition focuses on cutting-edge compressor technology, gas compression equipment, and related control systems, presenting opportunities for professionals across manufacturing, energy, chemical, and construction industries to discover the latest trends and innovations. The exhibition showcases a comprehensive range of compressors, including air compressors, gas compressors, industrial gas equipment, and related technologies, modules, and control systems.

SmartGen presented a range of products in the exhibition, such as air compressor controllers and engine controllers for engineering machinery control systems, along with battery chargers and fuel heaters.

ACC5100 Controller

ACC5100 Diesel Air Compressor Controller is used for air compressor with diesel-driven engine to realize start/stop, data measurement, maintenance, alarm protection and “Three Remotes” functions. It can automatically adjust speed based on the discharge pressure of air compressor, and control various ECU or non-ECU diesel air compressors.

HED200 Module

HED200 Engine Monitoring Module is designed for single engine monitoring. With RS485 port, various parameters can be flexibly set on it. It is mainly used for non-road Stage II engines. Its protection level is high, up to IP66. Highly reliable low-temperature performance ensures that it works normally at -40°C. The module integrates digital and intelligent functions, with all engine operation parameters visually displayed on the screen. And it offers simple operation and reliable running.

These new products on display demonstrated SmartGen's long-term technical expertise and excellent product performance in the intelligent engine control field.

The exhibition floor was lively, with dynamic discussions and promising collaborations taking shape. SmartGen warmly invites attendees to visit our booth for exchanges and guidance, sharing new development opportunities.

www.smartgen.cn

[iotexpo]

Industry trend｜First stop going global! The World Intelligent Internet Innovation Alliance (WAIA) successfully completed the Hong Kong and Singapore forums

From October 13 to October 16, the World AIoT Innovation Alliance (WAIA Alliance) launched two overseas exhibition areas and theme forums in Hong Kong and Singapore for the first time.

Previously, during the IOTE 2024 22nd Internet of Things Expo Shenzhen Station & AGIC General Artificial Intelligence Conference and Industry Expo on August 28 this year, the World AIoT Innovation Alliance (WAIA) was officially established in Shenzhen. The alliance aims to build an open, cooperative and win-win industrial cooperation platform to fully promote the research and development innovation, standard setting, market expansion and international cooperation of AIoT technology, help smart IoT enterprise groups quickly connect AIoT institutions and important corporate organizations in various countries and regions around the world, and realize the sharing and construction of global resources, channels, talents and ecology, and attract AIoT associations from more than 15 countries and regions such as Thailand, Malaysia, Singapore, Hong Kong, China, and Taiwan, China to join the alliance.

In order to further exchange the development characteristics and cooperation needs of AIOT industries in various countries and regions, and continue to promote the implementation of WAIA in major overseas markets, the first WAIA overseas booth area and theme forum were organized by the Chairman of the Hong Kong Internet of Things Chamber of Commerce, Zhuang Yijian. The booth area is located in the Hong Kong Electronic Fair – Autumn Edition, which brings together smart IoT companies from both sides of the Taiwan Strait and various countries and regions to jointly display new IoT applications in the era of artificial intelligence. It also invites important guests from the fields of artificial intelligence and IoT and enterprises and institutions in Hong Kong, Shenzhen, Ningbo, Zhuhai and other places to discuss industry-related hot topics and jointly expand opportunities for group overseas expansion. During the exhibition, Deputy Director of the Hong Kong Commerce and Economic Development Bureau, Chen Baili, visited the IoT exhibition area many times to learn about the products and applications of each exhibitor in detail, and put forward corresponding opinions to encourage exhibitors to develop better.

01New Trend of AIoT: Embracing Global Industrial Integration, WAIA Accelerates Preparation

Nowadays, the digitalization and intelligent transformation of thousands of industries has become an irreversible new trend in the global market, and AIoT (AI + IoT) has become a key tool for various industries to achieve this transformation, showing a strong and optimistic growth opportunity. Intelligent Internet of Things (AIOT) is a research model for the integration of artificial intelligence and the Internet of Things, which can be regarded as a new and in-depth form of Internet of Things application. Among them, IoT (Internet of Things) is the infrastructure of AIOT. Based on its ubiquitous network communication infrastructure, sensors and smart terminals, it can effectively realize the intelligent interconnection of man-machine-object, and the intelligent operation of data collection-analysis-decision-making, and thus become the cornerstone of the digital construction of thousands of industries and the upgrading of smart city construction, and also accelerate the rapid development of new industries such as computing centers, smart wearables, smart robots, and unmanned driving.

With the continuous integration and evolution of the global digital economy, the AIoT market at home and abroad is also showing the characteristics of mutual integration, redivision of labor, and common development. In this wave of global industrial upgrading, Chinese Internet of Things companies have undoubtedly become the first echelon in the international market and the main camp of innovative applications and market share. Corresponding to the vitality and growth opportunities of the AIoT industry are the external environmental challenges that cannot be ignored today: in the current international environment of complexity, changeability and increasing uncertainty, how to more effectively promote the integration of the AIoT industry and the flow of information on a global scale, and expand the all-round and in-depth communication, market promotion and innovation opportunities between Chinese IoT companies and the international market, has become a particularly critical issue for the current industrial development.

In response to these new trends, new opportunities and new challenges, WAIA's first overseas theme forum (Hong Kong Station) was themed on building an innovative ecosystem for artificial intelligence and the Internet of Things. It was hosted by Mr. Hu Weibin, Chairman of the Hong Kong Internet of Things Chamber of Commerce, and representatives of industry associations and institutions such as Mr. Yang Weiqi, Executive President of the Shenzhen Internet of Things Industry Association, Mr. Zhu Zhentian, President of the Ningbo Internet of Things Intelligent Technology Application Association, Mr. Fan Yeming, Executive President of the Shenzhen Artificial Intelligence Industry Association, and representatives of key companies such as Mr. You Zhujian, Deputy Director of SenseTime Technology, Mr. Yang Zhitian, Vice President of Southeast Asia Department of Super Fusion Technology International Co., Ltd., and Mr. Lu Yun, Director of Intelligent Systems of the Automotive Technology Research and Development Center of the Hong Kong Productivity Council, participated in the forum. They shared in depth the latest and hottest industry trends, market size, number of companies, profitability, and future project landing opportunities, vocational education opportunities, and domestic substitution opportunities in the field of "AI+IoT" in the Greater Bay Area and across China, and provided a large amount of detailed first-hand data and industry observation experience. At the same time, they frankly pointed out the pain points, crises and possible solutions faced by the industry.

02Challenges and opportunities coexist: Hong Kong will become the first stop for AIoT to go overseas

In the first overseas forum of WAIA, senior industry guests pointed out that the revenue of some domestic IoT companies has recently faced a cliff-like decline, mainly because the digital layout of infrastructure in mainland China has been basically completed. Now the enterprise group has started closed-door research, planning and looking for opportunities for the next round of industry growth. It is generally believed in the industry that Chinese IoT companies have strong technical advantages, model advantages and product advantages in the current international market. Now is the right time to promote new opportunities for the industry to go overseas.

Looking to the future, Hong Kong, as the first stop for domestic IoT companies to go overseas, has unique window value and easier landing advantages, and has the opportunity to provide Hong Kong with a new city card of "new technology transformation" and new quality productivity based on the foundation of a large number of high-quality smart hardware companies in the hinterland of China. The guests pointed out: Looking to the future, all parties should accelerate the promotion of domestic IoT manufacturers to strengthen in-depth cooperation with their Hong Kong counterparts, and look forward to landing demonstration projects in Hong Kong.

03WAIA's second overseas stop: Hong Kong joins hands with Singapore to escort China's AIoT industry to go overseas

On October 14, the Hong Kong Internet of Things Chamber of Commerce and the Hong Kong Productivity Council continued to organize joint exhibition groups and WAIA member units to go to Singapore to participate in the three-day 2024 Asia-Pacific Industrial Transformation Exhibition (Industrial Transformation Asia-Pacific 2024) held at the Singapore Expo, and launched the Hong Kong Internet of Things Pavilion (Hong Kong Pavilion), the main venue keynote speeches and sub-forum theme exchanges, aiming to fully display Hong Kong's new enterprises, new achievements and new perspectives in the fields of innovative technology, green sustainability and artificial intelligence applications. The Quadrant Think Tank assisted in hosting the Hong Kong Internet of Things Pavilion theme sub-forum.

By linking the resources of enterprises, governments and institutions in multiple countries and regions at the exhibition site, the Hong Kong Internet of Things Pavilion demonstrated an inclusive, open, innovative and dynamic industrial ecology, which not only provided a unique perspective and more possibilities for data platformization and industrial intelligence, but also committed to providing more platform value and resource link value for Chinese Internet of Things companies to go global.

On October 15, at the Hong Kong Internet of Things Pavilion, WAIA launched the second overseas theme forum - Building AIOT Innovation Ecosystem Forum (Singapore Station). Representatives from the Hong Kong Internet of Things Chamber of Commerce, Hong Kong Productivity Council, Shenzhen Internet of Things Industry Association, Asian Automatic Identification Association, Malaysia Export Trade Office, Malaysia Internet of Things Association, iFLYTEK Singapore Office and other institutions attended and shared keynote speeches, jointly discussed the development of AIOT ecology, displayed the latest products and application solutions, and exchanged business opportunities and challenges in the ASEAN market.

Ms. Steffi SUN of the Quadrant Think Tank hosted the forum and witnessed the signing of a strategic cooperation agreement between the Hong Kong Internet of Things Chamber of Commerce and the Asian Automatic Identification Technology Association with the guests on site.

Mr. Zhuang Yijian, President of the Hong Kong Internet of Things Chamber of Commerce, and Dr. Anna Lau, Chairman of the Asian Automatic Identification Association, signed the contract as representatives of both parties. The two parties will give full play to the resource advantages of Hong Kong and Singapore under the framework of WAIA's global development, strengthen industrial alliances, and jointly promote the global expansion of the AIoT industry and WAIA organizations.

After the signing ceremony, the guests on site continued to exchange views in a relaxed atmosphere on the industrial development characteristics, technological trends and global cooperation vision of the WAIA Alliance in various regions of the world, and will continue to promote the alliance's continued outward expansion.

This paper is from Ulink Media, Shenzhen, China, the organizer of IOTE EXPO (IoT Expo in China)

[delifoodsmanufacturer]

China-Arab Bee Industry Fair: Boosting Economic and Trade Ties

With the continuous advancement of the "Belt and Road" initiative, the economic and trade cooperation between China and Arab countries has become increasingly close. Against this background, the China-Arab Bee Industry Economic and Trade Expo was successfully held in Taizhou, Jiangsu from September 25 to 26, 2024. The event brought together nearly 100 representatives of bee industry organizations from China and Arab countries, and signed the "China-Arab Bee Industry Strategic Cooperation Agreement". At the opening ceremony of the conference, Yang Rong, president of the China Bee Products Association, delivered a speech. He emphasized that Arab countries are important trading partners of China in the bee industry. The two sides have good cooperation potential and significant complementary advantages in the field of bee industry. He proposed that the China Bee Products Association will take this conference as an opportunity to actively promote the establishment of a China-Arab bee industry cooperation mechanism and hold high-level dialogues regularly to promote and guarantee in-depth cooperation and mutual benefit between the two sides in terms of market connection and expansion, technology and talent exchanges, and standardization construction. Fassi Fassi Al Said Al Beshiri, Chairman of the Arab Beekeepers Union, introduced the work tasks and goals of the Arab Beekeepers Union, which aims to develop the beekeeping industry in the Arab world, achieve sustainable development, and strengthen the role of bees in protecting biological and environmental diversity. He expressed the Arab side's desire to carry out in-depth cooperation with China in product trade, technical exchanges, project co-construction and other aspects. The theme report of the conference focused on the current status of the development of the bee industry in various countries, production technology and trade needs. Representatives of the two industry organizations shared the development of the bee industry in China and Arab countries respectively; domestic bee industry experts introduced the construction of China's bee product technical standard system, the scientific research progress of royal jelly, and the production technology of Chinese propolis and royal jelly. Members of the Arab Beekeepers' Union reviewed the total output of honey and honey products and beekeeping in Arab countries, as well as the challenges and solutions to each problem faced by the industry. At the same time, they also discussed the impact of the invasion of Gaza on the extermination of humanity, the genocide war and the destruction of beekeeping and honey as a whole. In order to fully display the rich variety of honey sources in China and shape the image of Chinese good honey, a national good honey display and tasting area was specially built at the conference site, exhibiting nearly 30 kinds of single-flower honey with Chinese characteristics. More than 20 corporate booths were also set up outside the venue, and the exhibits covered bee products, bee machinery, packaging containers, bee medicines, intelligent solutions for the bee industry, etc., providing a communication platform for the participating representatives to enhance mutual understanding and conduct trade negotiations. As an industry leader, Wuhu Deli Foods Co.,Ltd  has been focusing on quality improvement and innovation promotion for many years. With in-depth understanding and accurate grasp of the Arab countries' market, the company has successfully promoted its products to every corner of the Middle East. In the hot climate of the Middle East, people's demand for honey lies not only in its delicious taste but also in its natural health benefits.  Wuhu Deli Foods gives full play to its own advantages and provides honey of superior quality and pure taste for Middle Eastern consumers, winning their high recognition and trust. The company has a professional international trade team who are familiar with the trade rules and cultural backgrounds of the Middle East and can provide efficient and high-quality services for customers. From product packaging design to logistics transportation arrangements, every link is carefully planned to ensure that products can reach Middle Eastern customers smoothly.On this platform,  Wuhu Deli Foods can exchange experiences and share achievements with counterparts from Arab countries and jointly discuss the future trends of apiculture development. At the same time, it can also take this opportunity to further expand the Middle East market, strengthen cooperation with local customers and enhance the international popularity of the brand. Arab countries are important participants in the “Belt and Road” initiative. China and Arab countries have extensive apiculture trade. The successful holding of the economic and trade negotiation conference not only deepens understanding and friendship in the field of apiculture between China and Arab countries. The relevant agreements reached at this conference have laid a solid foundation for deeper cooperation between the two sides in the future. Read the full article

[chinascientist]

China's data industry galloping toward wider digital future

            A visitor checks out Haier's booth during an electronics expo in Shanghai in March.  BEIJING — With its far-reaching impact across various sectors, the data industry is rapidly evolving into a game-changer in China, contributing to the country's economic growth and digital transformation.

Last year, the total amount of data generated nationwide reached 32 zettabytes, equivalent to the digital resources of over 10 million national libraries, according to the National Data Administration.

Emerging from the application of data technology to develop products and services, the data industry is an industrial form that spans a broad range of digital activities, including data collection, storage, processing, management, application, circulation and transaction.

As the once abstract concept of "big data" has been widely integrated into business practices, it has unlocked significant opportunities for companies to enhance efficiency and expand their market reach.

The market size of China's database industry exceeded 52 billion yuan ($7.28 billion) in 2023, and it is expected to reach 93.03 billion yuan by 2028.

This growth is complemented by the data transaction sector, which has experienced stable and rapid expansion in recent years. In 2022, the overall market size of data transactions reached 87.68 billion yuan, accounting for 13.4 percent of the global data market, and is projected to surpass 500 billion yuan by 2030, the industry data showed.

Contributing to this vibrant growth, the number of data-driven businesses in China has surged from 110,000 to over 1 million in the past decade. These enterprises play no small part in maximizing the value of data elements and driving further expansion and innovation across the data industry.

"In this new development stage where data have become a novel factor of production, we are witnessing the emergence of new production factors, new data space, and new infrastructure, as well as the rise and evolution of new industry forms," said Zhang Xianghong, a professor at Beijing Jiaotong University.

In response to the evolving landscape of the burgeoning sector, Chinese policymakers have turned their attention to supporting, advancing and guiding the development of the data industry.

Although the industry is closely intertwined with information technologies and the internet sector, it has unique development characteristics that require targeted policies, said NDA official Zhang Wang at a recent news conference.

Zhang said the administration is formulating targeted policies for businesses looking to make technological breakthroughs, explore data circulation, and improve infrastructure, which would support a more dynamic and innovative data ecosystem.

According to an action plan jointly released by the NDA with several other government organs at the end of last year, by the end of 2026 the breadth and depth of data element applications in China will significantly expand, with the annual growth rate exceeding 20 percent and data transaction scale doubling.

By aligning the burgeoning data industry with its broader digital drive, China has also accelerated advancements in cloud computing, artificial intelligence and e-commerce, among other digital domains.

The number of valid AI invention patents in China had reached 378,000 by the end of last year, with its year-on-year growth rate surpassing 40 percent, 1.4 times the global average, according to a report by the China Academy of Information and Communications Technology.

Essential to these achievements is China's expansive digital infrastructure. The number of 5G base stations in China had risen to nearly 3.92 million by the end of June, representing a net increase of 540,000 over the end of last year.

A recent official report forecasts that as the construction of digital infrastructure accelerates nationwide, the data industry is set to maintain its rapid growth, further permeating other sectors and driving the transformation and upgrading of traditional industries.

Looking ahead, Zhang said the country would fully leverage policy tools to develop the data industry, including implementing tailored measures to bolster investment, nurture talent, and promote industrial clustering in the sector.

We are thrilled to extend a warm welcome to the China Scientist Awards!

Join us for the China Scientist Awards, a premier event in the realm of research. Whether you're joining virtually from anywhere in the world, this is your invitation to explore and innovate in the field of research. Become part of a global community of researchers, scientists, and professionals passionate about advancing research.

visit: chinascientist.net Nomination Link: https://chinascientist.net/award-nomination/?ecategory=Awards&rcategory=Awardee Registration Link:https://chinascientist.net/award-registration/ For inquiries, contact us at contact@chinascientist.net ------------------------------------- Other website:

https://www.instagram.com/cs_chenguang/

[chengyouqing]

Qingtao International IndoBuildTech 2024 exhibition shines brightly, new fiberglass products lead to cooperation boom

On August 7, 2024, the 2024 Indonesia Building Technology Expo (IndoBuildTech 2024) officially opened. Chongqing Qingtao Fiberglass Products Co., Ltd. (hereinafter referred to as "Qingtao International") from China shined at the IH-16 booth in the NUSANTARA 1 exhibition hall with its excellent product display and cutting-edge technical solutions, attracting the attention and favor of many domestic and foreign customers.

As a leader in the field of global fiberglass products, Qingtao International has carefully prepared for this exhibition. It not only brought the latest developed fiberglass product series, but also displayed a number of technical solutions customized for the specific needs of the construction industry. These innovative products have become a highlight of the exhibition site with their significant advantages such as high strength, corrosion resistance and lightweight, attracting many architects, designers, developers and industry experts to stop and consult.

During the exhibition, the booth of Qingtao International was crowded with customers from Indonesia and neighboring countries. They all expressed great interest in Qingtao International's products and conducted in-depth exchanges on product performance, application cases, cooperation models, etc.

Many customers directly expressed their intention to cooperate on the spot, hoping to introduce Qingtao International's high-quality products and technologies into their respective projects to jointly promote the green and intelligent development of the construction industry.

Mr. Lu, the marketing general manager of Qingtao International, personally led the team Apple, Demi Hu, Lin Peng, and Meng Chen to participate in the exhibition, and said: "We are very honored to be invited to participate in an international event such as IndoBuildTech 2024, which not only provides an excellent platform for us to showcase our strength and innovative achievements, but also gives us the opportunity to have in-depth exchanges and cooperation with industry colleagues around the world. We deeply feel the strong demand for high-quality fiberglass products in Indonesia and even Southeast Asia, which further strengthens our confidence and determination to expand overseas markets."

In the future, Qingtao International will continue to adhere to the development concept of "innovation-led, quality first", continue to increase R&D investment, and launch more high-quality fiberglass products and technical solutions that meet market demand. At the same time, the company will also actively seek extensive cooperation with domestic and foreign partners to jointly promote the sustainable development of the global construction industry and contribute to building a better living environment.

[tsasocial]

Oerlikon Barmag at the UTECH Asia / PU China

Polyurethane has become an integral part of our daily lives, whether in the construction industry, in leisure activities, in the manufacture of furniture, or in numerous other applications. The precision gear pumps from Oerlikon Barmag, which will be presented at this year's UTECH Asia / PU China 2024 in Shanghai (booth 230), impress with customized solutions for demanding tasks in the chemical industry. They increase the productivity of the often complex manufacturing processes for this wide range of applications.

Components for all cases

Oerlikon Barmag pumps reliably handle demanding processes in PUR applications, in the chemical, plastics, or paint and lacquer industries. One of the greatest challenges lies in the highly accurate and reliable metering of toxic or low-viscosity media. With the GM and GA series and the associated components, Oerlikon Barmag presents the optimum equipment for these applications. "The magnetic couplings used specifically in the GM series fulfill the expectations of the manufacturing industry with their low maintenance requirements. In addition, they meet the high safety standards of the chemical industry, e.g. for compliance with clean air (“TA-Luft”) regulations," explains Andreas Heitzer, Sales Director of the Pumps business unit at Oerlikon Barmag. "If personal maintenance of a standard sealing is not possible or only possible to a limited extent due to a critical medium, magnetic couplings are the method of choice," he continues. If the product chamber of the pump must be sealed airtight to prevent undesirable reactions, magnetic couplings are used. Magnetic couplings are also used in vacuum processes. They also improve the suction behavior of the pump.

GM pump - a series for different operating conditions

Pumps in the GM series achieve precise dosing by feeding the flow with low pulsation. The multi-stage GM pump conveys low-viscosity media even under high pressure and the most difficult operating conditions (e.g. 250 bar, 100 mPas). The standard pump for many dosing tasks is the GM series in a square design. With the development of the multi-stage pump, the range of applications for the GM series has been significantly expanded. The round 2-stage GM pump has been specially developed for use in high-pressure technology. It fulfills the special challenge of pumping small flow rates with low viscosities. The pump serves flow rates from 0.05 to 20 ccm/rev and is therefore particularly suitable for the production of PUR molded parts, block foam, refrigeration unit insulation or sandwich panels.

GA series for higher viscosity media

Making products and processes more efficient is a constant challenge for manufacturing companies. This is why Oerlikon Barmag has added the GA series to the GM series, especially because of the demand for conveying high-viscosity media. The GA series is available in delivery volumes of 1.25 - 30 cm³/rev (0.6-144 l/h). It is designed for pressures up to 200 bar, for viscosities up to 1,500 Pas, and for temperatures up to a maximum of 225°C. With this pump series, Oerlikon Barmag offers customized solutions for process engineering processes where highly accurate and uniform metering is required.

For highly viscous media - the drum pump

The drum pump from Oerlikon Barmag is specially designed for conveying and dosing highly viscous materials such as adhesives, silicones and other highly viscous materials from drums and other large containers and for pressures of up to 250 bar. One of its special features is not only that it discharges highly viscous materials from the drum, but also that the medium can be dosed directly without an intermediate stop.

The gear pump and drum follower plate are synchronized so that the plate effortlessly reaches the bottom of the container, leaving behind only a very small residual quantity of < 1%. This reduces material costs and has a positive effect on the production process.

[greaterbayarea]

Hong Kong Commercial Daily | Concurrent with the 2024 “Boundless — Shenzhen-Hong Kong-Macao Youth Art Exhibition” at the Cultural Industry Expo

By Wang Na, Chen Yanjie And Zhao Shiyue

The highly anticipated 20th China (Shenzhen) International Cultural Industries Fair (hereinafter referred to as the “Cultural Industry Expo”) will be grandly held at the Shenzhen International Convention and Exhibition Center from May 23rd to 27th. As the highlight of the Cultural Industry Expo, the 2024 “Boundless — Shenzhen-Hong Kong-Macao Youth Art Exhibition,” organized by the Shenzhen Municipal Committee Propaganda Department, hosted by the Bao’an District Committee Propaganda Department and Shenzhen Press Group, and undertaken by the Hong Kong Business Times, will be unveiled concurrently on the second floor corridor of the Shenzhen International Convention and Exhibition Center.

This edition of the art exhibition, with art as its medium, aims to deepen the exchange and cooperation among young artists from Shenzhen, Hong Kong, and Macao, and promote the construction of the “Humanities Bay Area.” The exhibition specially invites influential artists and designers (Chen Xiangbo, Gao Shaokang) from Shenzhen and Hong Kong as co-curators, with meticulous preparation. The art exhibition brings together more than twenty artists from Shenzhen, Hong Kong, and Macao, showcasing art pieces with contemporary characteristics in fields such as contemporary art, public art, and industrial design. Spanning across various exhibition halls (№9–16) of the Cultural Industry Expo, it is the only professional outdoor art exhibition during the expo. The scale of the exhibition has expanded compared to last year, with an increase in participating artists and works. Some works are specially created for the art exhibition and will make their debut, promising an unprecedented visual and spiritual art feast for the audience.

During the art exhibition, on the afternoon of May 26th, the 2024 “Boundless — Shenzhen-Hong Kong-Macao Youth Art International Academic Salon” will be held at Hall 15 of the Shenzhen International Convention and Exhibition Center (Innovation Projects and New Product Release Zone). Artists, designers, and scholars from Shenzhen, Hong Kong, and Macao will gather to launch an initiative to establish the Shenzhen-Hong Kong-Macao Youth Art Exchange Center, turning the Shenzhen-Hong Kong-Macao Youth Art Exhibition into a prominent business card for public culture in the Greater Bay Area and sharing the stories of the Bay Area and China with the world.

Exhibition Venue Outdoor: Second-floor corridor of Shenzhen International Convention and Exhibition Center (Range of Halls 9–16) Indoor: Inside Hall 16 (Booth 16A05) Exhibition Time May 23, 2024, 12:00–18:30 May 24–27, 2024, 09:30–18:30

[xgnchina]

The 2nd China (Zhengzhou) Sand and Stone Exhibition in 2022 ended successfully

On August 22-24, 2022, the China (Zhengzhou) Sand, Gravel, Tailings and Construction Solid Waste Treatment Technology Exhibition with the theme of "Gathering Green Development and Promoting Collaborative Innovation" was successfully held in Zhengzhou International Convention and Exhibition Center.(xingaonai) As the co-organizer of the group's pioneer, Heavy Industry, in this exhibition, it displayed the heavy product gyratory crusher and the latest technology single-cylinder and multi-cylinder hydraulic cone crusher, which became the focus of the exhibition.

Looking back at the exhibition site, the T16 booth where the pioneer heavy industry is located is full of people, and there is an endless stream of exhibitors from afar. Carry out in-depth cooperative relations with pioneers.

At this grand event, we discussed new concepts, new ideas, and new methods of the mine crushing industry with friends who participated in the exhibition. At the same time, we issued production line plans on the spot according to customer needs and responded positively.

Concentrate on, build a dream with the original heart, and thank friends from all walks of life for their support and attention to Pioneer Heavy Industry as always; the future has come, we will continue to be down-to-earth and stride forward, and continue to bring you the most advanced products and high-quality services. Looking forward to meeting you again in 2023!

[heavy-hammer-crusher]

The 3rd Zhengzhou Sand and Gravel Exhibition 2023 grandly opens today. Xingaonai Group looks forward to meeting you at booth T22!

At 8 a.m. on June 3, the 2023 3rd China (Zhengzhou) Sand, (Heavy Hammer Crusher​)Gravel, Tailings and Construction Solid Waste Treatment Technology Exhibition and the 2023 China Green Intelligent Mine Construction and Construction Solid Waste Utilization Summit Forum were held at the Zhengzhou International Convention and Exhibition Center in Henan The grand opening aims to promote the green development of the sand and gravel industry and build a trade bridge for the sand and gravel industry.

[jaw-stone-crusher]

The 3rd Zhengzhou Sand(Heavy Hammer Crusher) and Gravel Exhibition 2023 grandly opens today. Xingaonai Group looks forward to meeting you at booth T22!

At 8 a.m. on June 3, the 2023 3rd China (Zhengzhou) Sand, Gravel, Tailings and Construction Solid Waste Treatment Technology Exhibition and the 2023 China Green Intelligent Mine Construction and Construction Solid Waste Utilization Summit Forum were held at the Zhengzhou International Convention and Exhibition Center in Henan The grand opening aims to promote the green development of the sand and gravel industry and build a trade bridge for the sand and gravel industry.

[cone-crusher]

The 3rd Zhengzhou Sand(Heavy Hammer Crusher) and Gravel Exhibition 2023 grandly opens today. Xingaonai Group looks forward to meeting you at booth T22!

At 8 a.m. on June 3, the 2023 3rd China (Zhengzhou) Sand, Gravel, Tailings and Construction Solid Waste Treatment Technology Exhibition and the 2023 China Green Intelligent Mine Construction and Construction Solid Waste Utilization Summit Forum were held at the Zhengzhou International Convention and Exhibition Center in Henan The grand opening aims to promote the green development of the sand and gravel industry and build a trade bridge for the sand and gravel industry.

[intcodecorwallpanels]

Intco Decor welcomes you to visit our booth: 12.2 D31-36; E10-13 Exhibition information:Exhibition time: April 23-April 27, 2023Exhibition location: Guangzhou·China Import and Export Fair ComplexExhibition introduction: The China Import and Export Fair (Canton Fair) was founded on April 25, 1957. It is held in Guangzhou every spring and autumn. It is jointly sponsored by the Ministry of Commerce and the People’s Government of Guangdong Province. Organized by China Foreign Trade Center. It is China’s comprehensive international trade event with the longest history, the highest level, the largest scale, the most comprehensive product categories, the largest number of buyers attending the event, the widest distribution in countries and regions, and the best transaction results. It is known as “China’s No. 1 Exhibition” .This time Intco Decor participated in the second phase of the “Canton Fair” in the construction and decoration materials exhibition areas.Booth No. : 12.2 D31-36；E10-13 (via Intco Decor)