#Carbon Fiber KIt

[vividracing]

New Post has been published on https://www.vividracing.com/blog/new-gr-corolla-carbon-fiber-body-kit-from-seibon/

NEW: GR Corolla Carbon Fiber Body Kit from Seibon

Seibon has shocked the GRC community this morning with the surprise release of a full carbon program for the Toyota GR Corolla. This à la carte body kit program consists of nine additional/replacement pieces that will transform your GRC into a sharp and aero-forward hot hatch!

Aftermarket Seibon pieces for the Toyota GR Corolla include:

VS-Style Dry Carbon Hood

OEM-Style Dry Carbon Fenders

MB-Style Carbon Front Lip 

MB-Style Carbon Fiber Side Skirts 

MB-Style Carbon Fiber Rear Lip

OEM-Style Carbon Fiber Rear Spoiler

Dry Carbon Roof Replacement

Carbon Fiber Lift Gate (Not yet available)

Carbon Fiber Rear Fender Trims (Not yet available)

The Toyota GR Corolla isn’t just a car; it’s a pulse-pounding, eye-catching marvel of engineering designed for the enthusiast who dares to push the limits. Whether you’re shaving weight off your MORIZO Edition or upgrading your Core trim level to be lighter than a Circuit Edition, This GR Corolla kit is set to dominate the streets and the track. This kit is engineered with precision and designed to perform.

VS-Style Dry Carbon Hood: Large, functional air vents now getting cooler temps where it matters. This hood isn’t just about looking aggressive; it’s also about scrubbing off a significant amount of weight off one of the largest surface areas on the car. Perfect for shaving seconds off your lap times with reduced weight and cooler engine temps.

OEM-Style Dry Carbon Fenders: More than just a visual upgrade, these fenders are engineered to deal with the heat of battle—literally. By improving air circulation around the engine, they help maintain optimum performance during high-speed runs.

Carbon Fiber Rear Fender Trims: It’s all in the details. These trims might seem subtle, but they add a distinct edge to your vehicle’s profile, complementing your aggressive track stance.

MB-Style Carbon Fiber Lip This isn’t just a lip kit; it’s an all-around aerodynamic-enhancement that channels air precisely where you need it, stabilizing your car at high speeds and ensuring grip when it matters most.

OEM-Style Carbon Fiber Rear Spoiler: Stability isn’t just about keeping your car on the track—it’s about confidence at high speeds. This spoiler adds downforce where it counts, helping your GR Corolla stick to the road like glue.

Dry Carbon Roof Replacement: Drop weight from the highest point of your car to lower its center of gravity. This not only improves handling but also gives your Corolla a sleek, race-ready look that’s both functional and fiercely stylish.

Carbon Fiber Lift Gate: Finish off your build with a statement piece that cuts weight even at the rear, enhancing both aesthetics and performance. It’s the ultimate upgrade for those who leave nothing to chance.

Are You Ready to Transform Your Ride?

These parts are more than just accessories; they’re a testament to the spirit of time attack and the pursuit of perfect grip. Every component is a blend of passion and technology, designed with a 2×2 twill weave carbon fiber for unmatched strength and a flawless finish. They’re not just built—they’re crafted for performance, tested for perfection, and guaranteed to turn heads.

All these exclusive upgrades are now available to order along with a full range of mods for your Toyota GR Corolla at Vivid Racing. Whether you’re hitting the track or just the open road, elevate your car’s performance and aesthetic to new heights with Seibon’s custom carbon fiber parts.

See All GR Corolla Parts from Seibon

Some of our other favorite GR Corolla mods:

1.) Carbon Fiber Intake – Eventuri Carbon Fiber Intake Kit

2.) Oil Cooler Kit – Mishimoto Oil Cooler Kit

3.) Exhaust Kit – AWE Track Edition Exhaust

Have any questions – email us at sales@vividracing.com or call us at (480) 966-3040

[neverstopoutlaw]

[hydrodip01]

Premium Carbon Fiber Kits for Ultimate Customization

Unlock a new level of style and performance with our Premium Carbon Fiber Kits! Designed for enthusiasts and DIYers, these kits provide everything you need to transform your projects with a high-quality carbon fiber finish. Each kit includes precision-cut carbon fiber sheets, an easy application guide, and essential tools to ensure a seamless installation.

[extremeonlinestore]

Enhancing Style and Performance: C8 Z06 Ground Effect Package and Carbon Fiber Installation Guide

When it comes to making a statement on the road, nothing quite compares to the Chevrolet Corvette C8 Z06. With its sleek lines and powerhouse performance, this car is an icon in the automotive world. But if you’re looking to take your C8 Z06 to the next level, the C8 Z06 ground effect package combined with top-notch carbon fiber components can be the game-changer you need. Here’s your comprehensive guide to enhancing both style and performance, brought to you by the Extreme Online Store—your go-to hub for all things Corvette and Camaro!...Read More

[carbonadoaero]

Luxury Body Kits: The Perfect Blend of Performance and Elegance

Discover luxury body kits at a Carbonado Aero– where performance and luxury combine. Our designs combine elegance and high-performance elements in a way that perfectly balances functionality and style. Shop for our high-quality body kits and achieve the highest automotive performance. Visit us to learn more!

[adrenaline-alley]

[carbonfiberhoods]

Carbon Fiber body Kit in USA

Carbon Fiber Hoods are the latest in fashion accessory technology. They are made of carbon fiber, and provide superior aerodynamics, protection from the elements, while also looking great! They come in a variety of styles and colors to suit everyone's needs. Check out our Carbon Fiber body Kit, fenders, front bumpers and more!

[lordofbassca]

Speaker Repair 101: How To Use Speaker Repair Glue To Fix Your Audio Equipment

Audio equipment is an integral part of many homes and businesses. Without properly functioning speakers, the sound quality of music, movies, and other audio sources suffers drastically. Unfortunately, speakers are prone to damage due to wear and tear over time, which can affect their performance.

Speaker repair glue is a powerful tool for repairing damaged speaker components and restoring them to working condition. In this article we will discuss the importance of using the right speaker repair glue as well as provide a step-by-step guide on how to apply it effectively so that you can get back up and running quickly. We will also cover some maintenance tips and safety precautions when dealing with speaker repair glue.

Understanding Speaker Components: Why Speaker Repair Glue is Essential

By understanding the components of a speaker and the role each part plays in sound production, one can appreciate why specialized adhesives like speaker repair glue are essential for repairing cone or surround damage.

A typical speaker consists of a driver, which is responsible for generating sound waves; an enclosure that provides acoustic dampening; and transducers, which convert electrical signals into sound vibrations.

Speaker repair glue acts as a strong adhesive to hold these various components together, ensuring they remain secure even under the intense vibrations produced by powerful bass notes.

The lord of bass himself requires his speakers to be held together with robust adhesive solutions, like speaker repair glue.

By using this substance when fixing cone or surround damage on audio equipment, users can be sure their systems will operate smoothly without any distortion from loose parts.

Whether it's keeping a subwoofer secure during an energetic performance or simply restoring your home stereo system to its former glory, speaker repair glue is an invaluable tool in any audiophile's arsenal.

Choosing the Right Speaker Repair Glue: What to Look For

The selection of the correct adhesive for speaker repairs is a critical factor in ensuring successful and lasting repair work, with considerations such as adhesion strength, flexibility after drying, resistance to temperature fluctuations, and whether it is specifically designed for speakers or audio equipment all requiring careful attention.

It is important to choose the right glue that meets your needs:

* Adhesion Strength: A strong adhesive should be used for any speaker repair job. Look for an adhesive that has good gap-filling properties and can create a strong bond between two surfaces.

* Flexibility After Drying: The glue should retain its flexibility even after it has dried so that it won't crack or break when flexed. It's also important to make sure the glue will remain flexible in temperatures extremes and other environmental conditions.

* Resistance To Temperature Fluctuations: When choosing a glue for speaker repairs, you'll want one that can withstand drastic changes in temperature without cracking or becoming brittle.

* Speaker-Specific Glue: There are also glues specially formulated for audio equipment repairs; these glues may provide superior adhesion strength compared to general purpose glues. However, they may not have other features such as flexibility or temperature resistance.

When choosing speaker repair glue, consider all of these factors carefully so you can pick out the best product for your project. With the right choice of adhesive, you'll be able to complete any repair job quickly and easily while ensuring long-lasting results.

Step-by-Step Guide: How to Apply Speaker Repair Glue for Optimal Results

Careful application of the right speaker repair adhesive can ensure a secure and lasting bond for any audio equipment repairs.

To begin, it is best to start by ensuring that the surfaces of both speakers and their surrounding area are free from dirt and debris. This will make sure that the glue has maximum adhesion potential when applied.

Using a brush or cloth, it is then important to lightly abrade the surface where the adhesive will be placed to create better contact between the two surfaces.

Next, use a clean applicator such as a toothpick or an acid brush to apply an even layer of speaker repair glue on one of the surfaces you wish to join together. It is important not to add too much glue – just enough so that there is a thin film covering the whole surface.

Allow this layer of glue to dry until it becomes tacky before attempting to attach both pieces together with light pressure.

Finally, allow 24 hours for complete drying before testing out your repair job!

Maintenance and Safety Tips: Proper Handling of Speaker Repair Glue

Proper handling of speaker repair glue is essential for successful audio equipment repairs, and involves safety precautions, cleanup methods, and shelf life preservation.

It is important to always wear protective gloves when working with speaker repair glue to avoid skin contact.

Additionally, it is recommended to work in a well-ventilated area to reduce the risk of breathing in fumes from the adhesive.

When finished applying the glue, any remaining residue should be immediately wiped away with a damp cloth or paper towel before it dries; otherwise, it may become difficult to remove later on.

Furthermore, keeping unused speaker repair glue stored in its original container will help preserve its shelf life and ensure optimal results during use.

Maintaining speakers can also help prevent damage that requires using speaker repair glue.

Regular inspections should be conducted on all audio equipment components such as cones, magnets, and wiring for signs of wear and tear which could lead to future sound distortion or other issues requiring adhesive repairs.

Additionally, proper storage techniques can also help protect against any potential water damage or dust accumulation that could result in corroded wires or other faults needing fixing with a suitable sealant product like speaker repair glue.

Conclusion

In conclusion, speaker repair glue is an essential tool for anyone looking to fix their audio equipment. It can help prevent damage from occurring in the future and ensure that your equipment sounds great for years to come.

The key is to select the right type of glue and apply it correctly for optimal results. A little extra effort goes a long way when it comes to speaker repair glue – by taking the time to use it properly, you can secure virtually any part of your audio system with ease!

With its powerful adhesive properties, speaker repair glue is guaranteed to provide superior performance every time, making it a must-have item in any DIY audiophile’s arsenal!

Lord of Bass

Salida, CA 95368

Phone: (866) 312-9207

[performancespeed]

The Robot Craftsman Dry Carbon Fiber Full Body Kit for Tesla Model 3

The Robot Craftsman Dry Carbon Fiber Full Tesla Model 3 Body Kit for is a premium upgrade that will transform the look and feel of your car. Made from high-quality carbon fiber, this kit is both lightweight and durable, and it will give your Tesla a more aggressive and sporty appearance.

The kit includes the following components:

Carbon Fiber Hood Bonnet

FRP Front Bumper & Carbon Fiber Front Lip

Carbon Fiber Front Bumper Canards

FRP Rear Bumper & Carbon Fiber Rear Diffuser

Carbon Fiber Side Skirts

FRP Fender Flares

All of the components in the kit are pre-preg carbon fiber with UV protection clearcoat, so you can be sure that they will look their best for years to come. The kit is also easy to install, and it comes with all of the necessary hardware.

If you are looking for a way to make your Tesla Model 3 stand out from the crowd, then the Robot Craftsman Dry Carbon Fiber Full Body Kit is the perfect upgrade for you. It is lightweight, durable, and it will give your car a more aggressive and sporty appearance.

Here are some of the benefits of installing the Robot Craftsman Dry Carbon Fiber Full Body Kit on your Tesla Model 3:

Improved aerodynamic performance

Reduced weight

Increased strength and durability

More aggressive and sporty appearance

UV protection clearcoat for a long-lasting finish

If you are interested in purchasing the Robot Craftsman Dry Carbon Fiber Full Body Kit for Tesla Model 3, you can visit the Performance Speed Shop website. The kit is currently available for purchase for $3,009.00.

Please note: The kit comes with primed finish ready to be sanded and painted. If you want to change the color of the kit, you will need to have it professionally painted.

[highdemandcustomsautoparts]

What Are Mercedes Benz C Class Carbon Fiber Kits? Know More About It Here

Mercedes Benz C Class carbon fiber kits are aftermarket automotive parts made from carbon fiber, which is a strong and lightweight material. These kits are designed to replace certain exterior parts on a Mercedes Benz C-Class vehicle, such as the hood, trunk lid, or spoilers. The main benefit of using carbon fiber for these parts is weight reduction. Carbon fiber is significantly lighter than most metals, so replacing metal parts with carbon fiber counterparts can help reduce the overall weight of the vehicle, which can improve performance and fuel efficiency.

A Mercedes AMG front grill is a decorative and functional component of a Mercedes AMG vehicle's front end. It is located in the front of the car, between the headlights, and is usually made of plastic or metal. The front grill serves several purposes, including providing ventilation for the engine, protecting the front of the car from debris, and giving the car a distinctive appearance. Many aftermarket companies offer replacement front grills for Mercedes AMG vehicles, which can be made from a variety of materials, including carbon fiber, aluminium, and stainless steel.

Carbon fiber is also known for its high strength-to-weight ratio, so it can provide additional strength and durability to the parts it is used in. In addition to these performance benefits, carbon fiber kits may also provide a visual enhancement to the vehicle. Carbon fiber has a distinctive appearance, with a woven or textured surface, and it is often used to make high-end sports or racing cars. As such, installing carbon fiber parts on a Mercedes Benz C-Class may give the car a more aggressive or sporty look.

Carbon fiber kits for a Mercedes Benz C-Class can provide weight reduction and improved strength and durability for certain exterior parts of the vehicle. These benefits can lead to improved performance and fuel efficiency, as well as a sportier appearance.

Source

[vividracing]

New Post has been published on https://www.vividracing.com/blog/mercedes-clk63-black-series-front-carbon-spoiler-reborn/

Mercedes CLK63 Black Series Front Carbon Spoiler Reborn

The Mercedes CLK63 AMG Black Series is one of the most iconic cars of its time. With only 500 cars made in the world and 394 brought to the USA, this car has become a collectors piece. Only available as a 2008 model, the DTM inspired flares and raw 6.3L (6.218L actually) V8 engine pumps out 500 horsepower with its 7 speed paddle shift transmission. In its heyday, this was the pace car for F1 races around the world and posters on the walls for many enthusiasts.

Back in 2019 I had purchased a very rare 1 of 10 Mars Red Mercedes CLK63 AMG Black Series. When COVID hit and space in the Vivid Racing shop became a premium, I decided to sell the car on Bring a Trailer. Having purchased the car for $72500 and sold it for $95000, I thought I was a big dog. Today that car with 23000 miles I sold it with is worth $150K.

So after I sold my Porsche 992 GT3 we did here at Vivid Racing, I started a new quest to find another Black Series. With not a single Mars Red available in the USA, I started to look globally. Since I had previous imported the Ford Escort RS Cosworth from Spain, I decided to see what was in Europe. After some searching I came across this incredible white one that was actually produced in 2007 for the AMG CEO. It was outfitted with many European market exclusive options such as carbon fiber door cards, a carbon fiber GT trunk wing, and bucket AMG racing seats. But then it had this crazy front lip spoiler that further accentuated the DTM look of the car. Unfortunately they wanted $130,000 for this vehicle that had an equivalent of 70,000 miles so I continued my hunt.

A short time later I came across this beautiful Silver CLK63 in Nashville. With only 19500 miles on it, this was the perfect car. Wanting to get this as a collector piece, I did not want to really modify it. But that white one with the front lip kept on pulling heart strings. When the CLK63 hit the USA market, the aftermarket community went crazy with modifications not knowing what this car would become. Everything from suspension, exhausts, intakes, superchargers, and more aero parts. Being that the CLK63 comes factory with a carbon fiber rear diffuser, a carbon fiber trunk lip wing, and carbon fiber front bumper side vents, it is definitely missing a carbon fiber front lip.

     Utilizing our experience with creating Carbon Fiber Aero parts, I 3d scanned the entire front bumper. Pulling from queues of the white Mercedes CLK63, we designed this new front lip spoiler to flow seamlessly with the rest of the aero and carbon fiber style. Now with a complete CAD model completed, a CNC aluminum mold was developed to lay up pre-preg carbon fiber material and then allow it to cure in an autoclave. Utilizing the latest technology and tier 1 materials in the pre-preg carbon fiber process, we achieve a beautiful glossy finish. The result is an OEM matching 2×2 twill carbon weave that fits to perfection.

In the end we now have a carbon fiber front lip spoiler for the limited amount of Mercedes CLK63 AMG Black Series cars. This isn’t a get rich product, but brings back the initial modding and enthusiast craze of such a legendary car. If interested in acquiring one of these front lip spoilers, just click on the link below or contact us.

Order the VR Aero Mercedes CLK63 AMG Front Lip Here

[penaltyboxboxbox]

ab the ferrari suits, there are a few things I'd change like the little square around the shell logo and the saturation of hp (what could they have done realistically lbr that's a title sponsor) but I??? Like it?? I think the dedication to the engineers is cute?? And the kits honestly ate idc same w the trophy

I really like the traditional trophies but sometimes trying smth different it works out and sometimes it doesn't (zandvoort sorry some of the messages were nice but overalllll ehhhhh)

at the end it's just personal preference but I do think it's getting disproportionate hatery

imo they could come out in actual trash, but if the car is fast I'll take it

literally i get people hate logos but they need to move on from it because at the end of the day sponsor logo readability and adherence to brand standard will always come first...like they are Not Allowed to display sponsor logos in "incorrect" ways its just part of what they agree to when they bring on a sponsor and that means bright blue hp and shell being displayed on a solid color bg. i actually think they managed very well with shell by putting it in the yellow square, it fits in very modularly and reads well into the overall concept w using yellow as the dominant color there...like they couldve just slapped it on a white square like some other teams are stuck doing for their sponsor logos cmon..theyre overall really lucky to have so many sponsors who DO allow them to display their logos in a color like yellow that is most certainly not in their brand guidelines. personally i think that alone speaks to how well these sponsors view ferrari as a brand and a partner, its like kind of insane to imagine a huge company ALLOWING the recoloring of their logo like that, easily they couldve been required to keep every sleeve logo white or something..

I think we are way too harsh on ferrari when they are LITERALLY the only team that even tries to do anything interesting with race suits and has pretty consistently given us a bunch of different designs. and not even just recolors!! new designs! its great and i wish more teams would take the risk, it makes it a lot of fun. I think the hate on the carbon fiber look is lame, its a pattern thats so quintessentially racecar, i think the sleeve on the jerseys looks great and very fashionable. and I think the race suits are FUN i think they feel kind of old school and are very striking, they almost remind me of like a subtle jockey silk. i already love the vintage racing stripes feel of the regular suits this year, and i think the yellow striping + the pattern looks great and is really bold and refreshing. so much fucking better than a boring ass black race suit. try thinking about sports gear as something meant to be eye catching, iconic, memorable, collectible, and not just like. idk...sexy for an aesthetic post...idk

dont get me started on trophies, i really do view the trophies, especially ones by contemporary artists, as just that. contemporary art. and while im all good w people having their opinions and having discussions on that art, i hate how often it turns into just like. the tired old takes of Modern Art Bad, Classical Art Good. i actually really loved the zandvoort trophies lookswise, the sentiments written were a little eh, but i thought it was a great way to refresh the trophies, a very cool technique used, and a great way to get people talking! I love the monza trophies, as I said, i think theyre really beautiful n compelling sculptures...

i just think generally a lot of people do in fact have narrower vision if what they believe is "good art" than even they think they do, and i think a majority of people completely misunderstand sports design and just don't like seeing things that are different/not sexy 🤷‍♂️

[socially-awkward-skeleton]

tagged by @direwombat and @ivymarquis thank you both so much <3

tagging: @madparadoxum @jillvalentinesday @confidentandgood @afarcry5fromstraight @nightbloodbix @roofgeese @inafieldofdaisies @voidika @kyber-infinitygems @clicheantagonist @adelaidedrubman @strafethesesinners @statichvm @neverthesameneveranother @peppertheferalraccoon @josephslittledeputy @marivenah @simplegenius042 @theelderhazelnut @josephseedismyfather @v0idbuggy @florbelles @poetikat @ladyofedens-blog @eclecticwildflowers @shallow-gravy @cassietrn @strangefable @stacispratt

writing tag list here to be added/removed

Work on chapter 47 of American Beasts has begun, and this is very much the chapter that kicks off the climax of the fic. The war between the cult and the resistance is about to come to a head, and Kit and John are about to invade Fall's End. But first, some of Kit's prepping for war and getting inside of her head:

With the sudden winter storm came the flood of freezing rain afterwards, washing away the snow and turning it to dirty gray slush instead. The calm and the quiet retreated with the pelting drops that fell from the sky. The bright white of the snow turning bleak as an unsettling amassing of clouds above seemed to block out the sun entirely. Hope County was thrust into darkness as if the end of the world was right on their doorstep.

God was watching. Waiting. 

All Kit could do was prepare. The simple task of cleaning her gun relaxed her. She knew every step without thinking, memorized until her hands knew all the motions even when her mind was far afield. War was on the doorstep, and as much as Joseph could tell her that wasn’t her role anymore, being a soldier was what she knew. It was in her blood. Fighting gave her purpose, it gave her a reason to live. Fighting kept her heart beating, her lungs straining for another breath. It was why she was alive and she couldn’t forget that. 

Back in Afghanistan before every mission (and before that night in the helicopter flying to Joseph’s church to arrest him) she had always had her ritual. Some prayed, some wrote letters back home to the ones they loved, some turned to vices – she relied on her weapons, they were the only thing she’d ever put any trust in other than herself. 

Standing at the desk in Jacob’s office, covered in maps, plans and preparations set into motion long before the deadline would be struck, she stripped her gun. Sliding apart each cool piece of metal, her fingers ran over the notches and the knicks from wear and tear before taking out her cleaning rods. She sprayed the parts of her rifle with cleaner and swabbed them free of the carbon fibers and build up that had occurred with use, wiping them down with a rag. Each pin popped out with relative ease, the carrier group sliding free of the upper receiver. She worked meticulously, getting into every alcove, removing every hint of debris. 

Her mind stayed focused, narrowed and tunneled to remain on only one thing. The thoughts of failure were blocked, the darkness walled off. She was a warrior and this battle was the fuse that would light the fires of Hell in Hope County. Brother against brother, neighbors on opposite sides of the fight. Friends made foes. What she’d give for an angel to appear to the citizens outside the Project, delivering to them the word, but even then she didn’t think they’d ever listen. They didn’t want to see the end, they weren’t ready to believe, too blinded by their own sins to see the light. Devastation was all they wanted, so it’s what she would deliver unto them. 

After cleaning was complete, she began to lubricate the bolt and its release, the trigger on the springs, and a little oil to the buffer spring. Her brow furrowed as she rubbed at the metal with the lubricant, her mouth pursed as she made sure to dig into every corner with her cloth, when warm arms wrapped around her and held her tight. Her eyes widened, her one track mind taken off course. She stiffened instinctively, muscles reacting to a threat. The fight kicked in before she’d come to her senses, the bite that had been trained into her. 

Looking down at her waist she recognized the scarred and inflamed skin of the arms that surrounded her, but that didn’t stop her chest from squeezing so tight the very breath was stolen from her, the parts in her hand starting to shake as the tension in her grip steadily built.

His mouth rested by her ear, voice warm and smoky like campfire while his beard burned the soft exposed skin of her neck and shoulder. “Did I spook ya?”

Hands gripped her tight, her muscles shifting reflexively underneath his touch despite trying to remind her that she was protected. She was safe. That she was there with him. She was home. Fingers splayed out against her stomach, pressing in against her core. Her weakness.

“Kitty?”

She finally withdrew the breath she’d been sheltering inside her throat and her heart rate slowed. The natural instinct in her finally calming only for her to be left confused as to why now of all moments he decided to be here and to hold her. There had been no bloodshed, no struggle, no breakdown. It was serene, a moment to herself, and there he appeared during the mundane. 

“N-no.” She shook her head, not sure if she was assuring him of her words or herself. “Just thinking,” she muttered while wiping off the excess lubricant leaving the exterior of the bolt with a sheen. 

“I should’ve known better than to disturb ya while you were gettin’ prepped.”

Kit huffed out a sigh, blowing her bangs out of her face and he withdrew his grip on her, pulling back. Dropping her gun on the table, she grabbed his hands and curled them around her once more. “No. Don’t let go,” she said softly.

His brow furrowed, but he did as he was ordered, holding her tightly against him once more. “You gettin’ stuck in your own head again?”

“Can’t help it. Just getting in the zone. I’m gonna have to be sharp for this one. John and I,  we both have targets on our backs. Just gotta hope God’ll show us a little mercy.”

He stood silently and she already knew he’d have nothing good to say about her hopes for God intervening, but he didn’t say a word. It was better to leave her with her faith if it meant she’d come back home. Jacob had that much sense about him, he still didn’t believe, but she did (in her own way). 

As he held her she connected the puzzle pieces of her rifle back together, the upper and lower receivers, and the bolt carrier group. Each click and snap restoring further calm, things would come together, she had nothing to fear. She was ready for this, she’d been preparing all of her life for this moment. God was on her side. 

The soft fanning of his breath against her skin as he watched her work helped ground her, that smell of cigarette smoke wafting up her nostrils reminding her of being in that cage, knowing he watched her then too. A force of nature, something worth beholding for a man who’d seen it all. War. Death. He was unfazed, until she arrived. 

She took the cleaning rod and passed it down the barrel, plunging it in and out, slowly and thoughtfully. All the bullets she’d spent in all this time, the blood that poured, the lives stolen, she hoped they were all worth it in the end. According to Joseph there would be a day when she’d stop fighting and find her peace, when she would be wiped clean of her sin, the taint she carried with her finally flushed from her soul and scrubbed from her body. She couldn’t imagine it, being a leader without an outside force pressuring her to be, but if it was God’s will who was she to question it?

Wiping down the exterior of the gun with her rag of any excess oil and cleaner, it looked like new. Untouched. A weapon that had never once fired a bullet. She supposed that would be her fate as well once she was freed of the burden she carried like the albatross around her neck. Innocent and pure. Fit for Eden.

Testing the trigger and the safety, she made sure they worked just as smoothly as they had before. Taken apart, put back together. Tools shoved into the crevices, shards removed like shrapnel. None would be the wiser about how used this weapon was. The things it had to do for the one who controlled it. No one blames the tool, they blame the handler. 

Except when it came to her.

[forgeline]

Smart choice. Continental Tire’s Chevrolet C8 Corvette project was built by the team at Lingenfelter’s Wixom facility. It’s equipped with Nowicki Autosport Design’s Concept 8 widebody kit with carbon fiber aero and wrapped with a distinctive Continental brand livery by Wixon, Michigan’s Artworks Design. It’s powered by Lingenfelter’s 700 HP supercharger system boosted by a Magnuson supercharger and rides on Continental Tire ExtremeContact Sport 02 Tires and 20x10/21x11.5 Forgeline one piece forged monoblock NW104 wheels finished in Carbon Flash with HTM! See more at: https://www.forgeline.com/customer-gallery-continental-tire/cgk2709

🇺🇸🇺🇸🇺🇸